Soluble narrow band gap and blue propylenedioxythiophene-cyanovinylene polymers as multifunctional materials for photovoltaic and electrochromic applications

A family of soluble narrow band gap donor-acceptor conjugated polymers based on dioxythiophenes and cyanovinylenes is reported. The polymers were synthesized using Knoevenagel polycondensation or Yamamoto coupling polymerizations to yield polymers with molecular weights on the order of 10 000-20 000 g/mol, which possess solubility in common organic solvents. Thin film optical measurements revealed narrow band gaps of 1.5-1.8 eV, which gives the polymers a strong overlap of the solar spectrum. The energetic positions of the band edges were determined by cyclic voltammetry and differential pulse voltammetry and demonstrate that the polymers are both air stable and show a strong propensity for photoinduced charge transfer to fullerene acceptors. Such measurements also suggest that the polymers can be both p- and n-type doped, which is supported by spectroelectrochemical results. These polymers have been investigated as electron donors in photovoltaic devices in combination with PCBM ([6,6]-phenyl C(61)-butyric acid methyl ester) as an electron acceptor based on the near ideal band structures designed into the polymers. Efficiencies as high as 0.2% (AM1.5) with short circuit current densities as high as 1.2-1.3 mA/cm(2) have been observed in polymer/PCBM (1:4 by weight) devices and external quantum efficiencies of more than 10% have been observed at wavelengths longer than 600 nm. The electrochromic properties of the narrow band gap polymers are also of interest as the polymers show three accessible color states changing from an absorptive blue or purple in the neutral state to a transmissive sky-blue or gray in the oxidized and reduced forms. The wide electrochemical range of electrochromic activity coupled with the strong observed changes in transmissivity between oxidation states makes these materials potentially interesting for application to electrochromic displays.     

Synthesis and photovoltaic properties of conjugated side chains polymers with different electron‐withdrawing and donating end groups

A series of novel low band gap polymers containing conjugated side chains with 4,7‐dithien‐5‐yl‐2,1,3‐benzodiathiazole and different electron‐withdrawing end groups of aldehyde ( PT‐DTBTCHO ), 2‐ethylhexyl cyanoacetate ( PT‐DTBTCN ), 1,3‐diethyl‐2‐thiobarbituric acid ( PT‐DTBTDT ), and electron‐donating end group of 2‐methylthiophene ( PT‐DTBTMT ) have been designed and synthesized. All polymers exhibit good solubility in common organic solvents, film‐forming ability, and thermal stability. These conjugated polymers show the broad ultraviolet‐visible absorption and the narrow optical band gaps in the range of 1.65–1.90 eV. Through changing the end group of conjugated side chains, the photophysical properties and energy levels of the polymers were tuned effectively. Bulk heterojunction solar cells based on the blend of these polymers and (6,6)‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) reached the best power conversion efficiency (PCE) of 2.72%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Supramolecular assembly of H‐bonded side‐chain polymers containing conjugated pyridyl H‐acceptor pendants and various low‐band‐gap H‐donor dyes bearing cyanoacrylic acid groups for organic solar cell applications

Novel supramolecular side‐chain polymers were constructed by complexation of proton acceptor (H‐acceptor) polymers, i.e., side‐chain conjugated polymers P1–P2 containing pyridyl pendants, with low‐band‐gap proton donor (H‐donor) dyes S1–S4 (bearing terminal cyanoacrylic acids) in a proper molar ratio. Besides unique mesomorphic properties confirmed by DSC and XRD results, the H‐bonds of supramolecular side‐chain structures formed by pyridyl H‐acceptors and cyanoacrylic acid H‐donors were also confirmed by FTIR measurements. H‐donor dyes S1–S4 in solid films exhibited broad absorption peaks located in the range of 471–490 nm with optical band‐gaps of 1.99–2.14 eV. Furthermore, H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 exhibited broad absorption peaks in the range of 440–462 nm with optical band‐gaps of 2.11–2.25 eV. Under 100 mW/cm² of AM 1.5 white‐light illumination, the bulk heterojunction polymer solar cell (PSC) devices containing an active layer of H‐bonded polymer complexes P1/S1–P1/S4 and P2/S1–P2/S4 (as electron donors) mixed with [6,6]‐phenyl C₆₁ butyric acid methyl ester (i.e., PCBM, as an electron acceptor) in the weight ratio of 1:1 were investigated. The PSC device containing H‐bonded polymer complex P1/S3 mixed with PCBM (1:1 w/w) gave the best preliminary result with an overall power conversion efficiency (PCE) of 0.50%, a short‐circuit current of 3.17 mA/cm², an open‐circuit voltage of 0.47 V, and a fill factor of 34%. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5998–6013, 2009     

Low band gap copolymers consisting of porphyrins,thiophenes, and 2,1,3‐benzothiadiazole moieties for bulk heterojunction solar cells

Two novel low band gap conjugated copolymers containing porphyrins, thiophenes, and 2,1,3‐benzothiadiazole ( BTZ ) moieties were synthesized and applied in bulk heterojunction solar cells. The thermal, optical, electrochemical, and photovoltaic properties of the two copolymers were examined to investigate the effect of the introduction of BTZ moiety in the backbone of the porphyrin polymers. The copolymers exhibited good thermal stability and film‐forming ability. The absorption spectra indicated that the BTZ moiety has significant influence on the UV–visible region spectra of the copolymers: with increasing the molar amount of BTZ moieties in conjugated main chain, the absorption in the range of 450–700 nm is largely broadened and red‐shifted compared to the similar polymers without BTZ moiety, and the optical band gaps of copolymers were narrowed to ～1.50 eV. The photoluminescence spectra showed that there is effective charge transfer in the whole conjugated main chain. Cyclic voltammetry displayed that the band gaps were reduced effectively by the introduction of the BTZ moieties. The bulk heterojunction solar cells were fabricated based on the blend of the copolymers and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PC₆₁BM) in a 1:2 weight ratio. The maximum power conversion efficiency of 0.91% was obtained by using P2 as the electron donor under the illumination of AM 1.5, 100 mW/cm². © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Structural tuning of low band gap intermolecular push/pull side-chain polymers for organic photovoltaic applications

A series of novel low band gap donor-acceptor (D-A) type organic co-polymers (BT-F-TPA,BT-CZ-TPA and BT-SI-TPA) consisting of electron-deficient acceptor blocks both in main chains (M1) and at the pendant (M2) were polymerized with different electron rich donor (M3-M5) blocks,i.e.,9,9-dihexyl-9H-fluorene,N-alkyl-2,7-carbazole,and 2,6-dithinosilole,respectively,via Suzuki method.These polymers exhibited relatively low band gaps (1.65-1.88 eV) and broad absorption ranges (680-740 nm).Bulk heterojunction (BHJ) solar cells incorporating these polymers as electron donors,blended with [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM) or [6,6]-phenyl-C71-butyric acid methyl ester (PC71BM) as electron-acceptors in different weight ratios were fabricated and tested under 100 mW/cm2 of AM 1.5 with white-light illumination.The photovoltaic device containing donor BT-SI-TPA and acceptor PC71BM in 1:2 weight ratio showed the best power conversion efficiency (PCE) value of 1.88％,with open circuit voltage (Voc) =0.75 V,short circuit current density (Jsc) =7.60 mA/cm2,and fill factor (FF) =33.0％.     

Novel two‐dimensional donor–acceptor conjugated polymers containing quinoxaline units: Synthesis,characterization, and photovoltaic properties

Novel two‐dimensional donor–acceptor (D–A) structured conjugated polymers, P1–P4, were designed and synthesized by introducing electron‐deficient quinoxaline as core and electron‐rich alkoxyl‐phenylenevinylene in side chains and p‐phenylenevinylene, triphenylamine, or thiophene in main chain. Benefited from the D–A structures, the polymers possess low bandgaps of 1.75 eV, 1.86 eV, 1.59 eV, and 1.58 eV for P1, P2, P3, and P4, respectively, and show broad absorption band in the visible region: the shorter wavelength absorption peak at ～400 nm ascribed to the conjugated side chains and the longer wavelength absorption peak between 500 nm and 750 nm belonging to the absorption of the conjugated main chains. Especially, the absorption band of P4 film covers the whole visible range from 300 nm to 784 nm. The power conversion efficiencies of the polymer solar cells based on P1–P4 as donor and PCBM as acceptor are 0.029%, 0.14%, 0.46%, and 0.57%, respectively, under the illumination of AM 1.5, 100 mW/cm². The polymers with the low bandgap and broad absorption band are promising photovoltaic materials. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4038–4049, 2008     

Synthesis and photovoltaic properties of two‐dimensional D‐A copolymers with conjugated side chains

Four novel two‐dimensional (2D) donor–acceptor (D‐A) type copolymers with different conjugated side chains, P1 , P2 , P3 , and P4 (see Fig. 1 ), are designed and synthesized for the application as donor materials in polymer solar cells (PSCs). To the best of our knowledge, there were few reports to systematically study such 2D polymers with D‐A type main chains in this area. The optical energy band gaps are about 2.0 eV for P1 – P3 and 1.67 eV for P4 . PSC devices using P1 – P4 as donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as acceptor in a weight ratio of 1:3 were fabricated and characterized to investigate the photovoltaic properties of the polymers. Under AM 1.5 G, 100 mA/cm² illumination, a high open‐circuit voltage (V_oc) of 0.9 V was recorded for P3 ‐based device due to its low HOMO level, and moderate fill factor was obtained with the best value of 58.6% for P4 ‐based device, which may mainly be the result of the high hole mobility of the polymers (up to 1.82 × 10^?3 cm²/V s). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

基于1-(4-己氧)苯和2,4,6-三苯基-1,3,5-三嗪功能化芴单元的聚合物蓝光材料的合成与表征

以聚(9,9-二己烷芴)(1)和聚(9,9-二(1-(4-己氧)苯)芴)(2)作为参照物,通过Suzuki偶联反应合成了侧链9位碳含有4-己氧基苯和2,4,6-三苯基-1,3,5-三嗪单元的芴共聚物3.聚合物1,2和3固体粉末的5%质量热损失温度分别是274,318和401℃,玻璃化转变温度分别是91,120和139℃.聚合物1,2和3在甲苯溶液中的最大吸收峰和荧光发射峰分别在380和435 nm.从聚合物1到聚合物3,薄膜的荧光发射最大半峰宽逐渐降低.大体积刚性吸电子2,4,6-三苯基-1,3,5-三嗪基团的引入,使聚合物1,2和3的热稳定性、蓝光发射的色纯度和光谱稳定性逐渐提高,不同工作电压驱动下聚合物3稳定的电致发光光谱进一步证明了这一点.聚合物1,2和3的最高占有轨道能级分别为-5.72,-5.95和-5.96eV,最低未占有轨道能级分别为-2.70,-2.39和-2.43 eV.聚合物1,2和3的三线态能级分别为2.82,2.81和2.97 eV.聚合物1,2和3的单线态-三线态能级差分别是0.32,0.32和0.15 eV.4-己氧基苯的引入使聚合物的能隙变宽,而吸电子的2,4,6-三苯基-1,3,5-三嗪的引入使聚合物单线态-三线态能级差依次减少.聚合物1,2和3粉末均易于形成非晶薄膜.聚合物3粉末的有序性介于聚合物1和2之间,聚合物2侧链的烷氧基苯有助于提高固体粉末有序形态的多样化.综合结果表明,侧链含有刚性4-己氧基苯和2,4,6-三苯基-1,3,5-三嗪基团的无规共聚物3具有更佳的综合光电性质.     

Polymer Photovoltaic Cells Based on Polymethacrylate Bearing Semiconducting Side Chains

Polymethacrylate with semiconducting side chains ( P1 ), synthesized by free radical polymerization, was used as a donor material for polymer solar cells. P1 is of high molecular weight (M _n = 82 kg mol⁻¹), good thermal stability, narrow band gap (1.87 eV), and low‐lying HOMO energy level (−5.24 eV). P1 possesses not only the good film‐forming ability of polymers but also the high purity of small organic molecules. Power conversion efficiencies (PCEs) of 0.63% and 1.22% have been obtained for solar cells with M1 :PC₇₁BM and P1 :PC₇₁BM as the active layers, respectively. With PC₆₁BM as the acceptor, PCEs of M1 and P1 based devices decrease to 0.61% and 0.76%, respectively. To the best of our knowledge, this is the first report that free radical polymerization can be used to prepare polymer donors for photovoltaic applications.     

Perylene diimide copolymers with dithienothiophene and dithienopyrrole: Use in n‐channel and ambipolar field‐effect transistors

Solution‐processable polymers consisting of perylene diimide (PDI) acceptor moieties alternating with dithienothiophene (DTT), N‐dodecyl‐dithienopyrrole (DTP), or oligomers of these donor groups have been synthesized. We have, in addition to varying the donor, varied the N,N′ substituents of the PDIs. The thermal, optical, electrochemical, and charge‐transport properties of the polymers have been investigated. The polymers show broad absorption extending from 300 to 1000 nm with optical band gaps as low as 1.2 eV; the band gap decreases with increasing the conjugation length of donor block, or by replacement of DTT by DTP. The electron affinities of the polymers, estimated from electrochemical data, range from ?3.87 to ?4.01 eV and are slightly affected by the specific choice of donor moiety, while the estimated ionization potentials (?5.31 to ?5.92 eV) are more sensitive to the choice of donor. Bottom‐gate top‐contact organic field‐effect transistors based on the polymers generally exhibit n‐channel behavior with electron mobilities as high as 1.7 × 10^–2 cm²/V/s and on/off ratios as high as 10⁶; one PDI‐DTP polymer is an ambipolar transport material with electron mobility of 4 × 10^–4 cm²/V/s and hole mobility of 4 × 10^–5 cm²/V/s in air. There is considerable variation in the charge transport properties of the polymers with the chemical structures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Low band‐gap diketopyrrolopyrrole‐containing polymers for near infrared electrochromic and photovoltaic applications

Donor–acceptor type polymers bearing diketopyrrolopyrrole and 3,4‐ethylenedioxythiophene units are reported. The polymers are green and exhibit very low band‐gaps (1.19 eV) with strong and broad absorption (maxima of about 830 nm) in the near infrared (NIR) region in their neutral film states. The polymers display color changes between dark green and light blue with exceptional optical contrasts in the NIR regions of up to 78 and 63% as thin films and single‐layer electrochromic devices, respectively. Fast switching, good stabilities as well as high coloration efficiencies (743–901 cm² C^?1) were also observed. The polymers could also be potentially used as photovoltaic material, with a power conversion efficiency of up to 1.68%. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1287–1295     

Fluorine substituted conjugated polymer of medium band gap yields 7% efficiency in polymer-fullerene solar cells

Recent research advances on conjugated polymers for photovoltaic devices have focused on creating low band gap materials, but a suitable band gap is only one of many performance criteria required for a successful conjugated polymer. This work focuses on the design of two medium band gap (~2.0 eV) copolymers for use in photovoltaic cells which are designed to possess a high hole mobility and low highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels. The resulting fluorinated polymer PBnDT-FTAZ exhibits efficiencies above 7% when blended with [6,6]-phenyl C(61)-butyric acid methyl ester in a typical bulk heterojunction, and efficiencies above 6% are still maintained at an active layer thicknesses of 1 μm. PBnDT-FTAZ outperforms poly(3-hexylthiophene), the current medium band gap polymer of choice, and thus is a viable candidate for use in highly efficient tandem cells. PBnDT-FTAZ also highlights other performance criteria which contribute to high photovoltaic efficiency, besides a low band gap.     

Wide bandgap conjugated polymers based on bithiophene and benzotriazole for bulk heterojunction solar cells: Thiophene versus thieno[3,2-b]thiophene as π-conjugated spacers

Two wide bandgap (WBG) conjugated polymers, P2T-DTTTAZ and P2T-DTTAZ, with donor-π-acceptor (D-π-A) structures was designed and synthesized, utilizing thieno[3,2-b]thiophene (TT) and/or thiophene (T) units as π-bridge in conjugated polymer backbone. And, the wider optical band gap (E_g) of approximately 1.98 eV for P2T-DTTTAZ and 2.09 eV for P2T-DTTAZ were observed. Obviously, replacing T unit with larger conjugated plane TT unit as π-bridges, P2T-DTTTAZ resulted in the red shifted absorption and the reduced band gap, compared with these of P2T-DTTAZ. The polymer solar cells (PSCs) with an inverted device structure based on P2T-DTTTAZ or P2T-DTTAZ as donor and [6,6] phenyl-C₆₁ butyric acid methyl ester (PC₆₁BM) as acceptor were assembled and the photovoltaic properties were also investigated. The power conversion efficiencies (PCEs) of 1.57% for P2T-DTTTAZ and 1.25% for P2T-DTTAZ were obtained.     

Synthesis,characterization, and electroluminescence of fluorene and carbazole‐based blue light‐emitting polymers with different noncoplanar molecular architectures

In order to investigate the explicit optoelectronic variations of the photoluminescent polymer with sterically hindered side chains, three novel alternate polymers (P0, P1, and P2) based on fluorene and carbazole moieties were successfully synthesized through Suzuki coupling reaction. The molecular structures of the polymers were fully characterized by ¹H‐NMR, ¹³C‐NMR, elemental analysis, and gel permeation chromatograph, respectively. The photophysical properties, thermal stability, and energy band gaps of polymers P0, P1, and P2 were further examined through UV–vis absorption, photoluminescent spectra, differential scanning calorimetry, thermogravimetric analysis, and cyclic voltammetry. The experimental results indicated that the polymers took on wide band gaps of about 3.50 eV with deep blue emission in thin solid films. These polymers were found to show a high thermal stability with decomposition temperatures at 5% weight loss of the compounds in the range of 353–416 °C. Blue light‐emitting electroluminescent devices of the most branched polymer P2 with highest light‐emitting efficiency as emitting layers were characterized, which showed obviously improved spectral stabilities with respect to the parent polyfluorene materials. In conclusion, we have established an effective method to improve the spectral stabilities of polyfluorene material by synthesizing the zigzag‐shaped copolymer of fluorene and carbazole with sterically hindered pendant moieties of different molecular sizes. Copyright © 2014 John Wiley & Sons, Ltd.     

Tetra-EDOT substituted 3D electrochromic polymers with lower band gaps

A couple of novel electrochromic materials poly(2,3,4,5-tetrakis(2,3-hydrothieno[3,4-b]dixin-5-yl)-1-methyl-1H-pyrrole)(P(t-EDOT-mPy))and poly(5,5',5",5'"-(thiophene-2,3,4,5-tetrayl)tetrakis(2,3-dihydrothieno[3,4-b][1,4]dioxine))(P(t-EDOTTh))are electrodeposited via multi-position polymerization of their tetra-EDOT substituted monomers t-EDOT-mPy and t-EDOT-Th,respectively.Compared with the linear 2D structured poly(thiophene)(E_g=2.2 eV)and poly(2,5-bis(2,3-dihydrothieno[3,4-b][1,4]dioxin-5-yl)thiophene)(E_g=1.7eV),P(t-EDOT-Th)(E_g=1.62eV)has the lowest band gap.Hence,we speculate that the band gaps of the two polymers,having 3D structures,are decreased in contrast to non-substituted polymers or bi-EDOT substituted polymers,thiophene and 1-methyl-1H-pyrrole.The results indicated that P(t-EDOT-Th)thin films are more stable and show higher transmittance amid two polymers,which may find their utilization in organic optoelectronics.     

Synthesis and photovoltaic properties of new donor-acceptor benzodithiophene-containing copolymers

Four new alternating narrow band-gap copolymers containing benzodithiophene, 4,8-dithiophen-2-yl-benzo[1,2-c;4,5-c′-bis[1,2,5]thiadiazole, 4,9-bis(thiophen-2-yl)-6,7-di(2-ethylhexyl)-[1,2,5]thiadiazolo[3,4-g]quinoxaline, 5,8-dibromo-2,3-bis(5-octylthiophen-2-yl)quinoxaline, and 4,7-bis(5-bromothiophen-2-yl)benzo[1,2,5] thiadiazole units are synthesized under Stille reaction conditions. The structures, molecular masses, and physical properties of the copolymers are studied via ¹H NMR spectroscopy, GPC, cyclic voltammetry, and thermomechanical and thermogravimetric analyses. The polymers show solubility and a broad absorption region (with the band gap in the range from 0.81 to 1.53 eV). All of the polymers are photostable in air, and their levels of the highest occupied molecular orbital vary from ?4.98 to ?5.30 eV. Polymer solar cells based on these copolymers as donors and fullerene PC₆₀BM as an acceptor show open-circuit voltages in the range 0.16–0.61 V, and the efficiencies of the devices are in the range 0.02–0.49%.     

Benzodifuran‐containing well‐defined π‐conjugated polymers for photovoltaic cells

Two well‐defined alternating π‐conjugated polymers containing a soluble electroactive benzo[1,2‐b:4,5‐b′]difuran (BDF) chromophore, poly(BDF‐(9‐phenylcarbazole)) (PBDFC), and poly(BDF‐benzothiadiazole) (PBDFBTD) were synthesized via Sonogashira copolymerizations. Their optical, electrochemical, and field‐effect charge transport properties were characterized and compared with those of the corresponding homopolymer PBDF and random copolymers of the same overall composition. All these polymers cover broad optical absorption ranges from 250 to 750 nm with narrow optical band gaps of 1.78–2.35 eV. Both PBDF and PBDFBTD show ambipolar redox properties with HOMO levels of ?5.38 and ?5.09 eV, respectively. The field‐effect mobility of holes varies from 2.9 × 10^?8 cm² V^?1 s^?1 in PBDF to 1.0 × 10^?5 cm² V^?1 s^?1 in PBDFBTD. Bulk heterojunction solar cell devices were fabricated using the polymers as the electron donor and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester as the electron acceptor, leading to power conversion efficiencies of 0.24–0.57% under air mass 1.5 illumination (100 mW cm^?2). These results indicate that their band gaps, molecular electronic energy levels, charge mobilities, and molecular weights are readily tuned by copolymerizing the BDF core with different π‐conjugated units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Multipurpose selenophene containing conjugated polymers for optoelectronic applications

In this study, two new conjugated polymers were synthesized including benzotriazole (BTz) as the acceptor unit and selenophene as the π bridge donor segment. These acceptors were coupled with fluorene and carbazole via Suzuki condensation reactions. Electrochemical band gaps were calculated as 2.45 eV for P1 and 2.40 eV for P2. Electrochemical and optical studies of polymers indicate that both polymers are promising candidates for organic solar cell (OSC) and polymer organic light emitting diode (PLED) applications since they have suitable HOMO-LUMO energy levels and appropriate absorption and emission band ranges. Light emitting properties of synthesized polymers were investigated and the highest luminance value was found as 6608cd/m² for P1 at 8 V. Photovoltaic properties of polymers were investigated and the optimized device based on P2 showed 1.75% power conversion efficiency for P2 under AM 1.5 G illumination at 100 mW/cm².     

含Ullazine结构基元的共轭聚合物的合成及其光电性能研究

将Ullazine结构基元引入到聚合物主链或侧链中,分别与吡咯并吡咯二酮(DPP)、2,5-双(三甲基锡)噻吩共聚得到了二元共聚物PB和三元共聚物PT,分别利用凝胶渗透色谱和热重分析表征了聚合物的分子量和热稳定性,并研究了聚合物的光物理、电化学和光伏性能.基于共聚物PB和PT作为电子给体材料的聚合物太阳能电池器件测试结果表明,二元共聚物PB由于具有较低的能级水平从而获得较高开路电压,而侧链含Ullazine结构基元的三元共聚物PT具有更宽的吸收光谱和更高的空穴迁移率,获得了更高的短路电流和能量转换效率.     

Efficient synthesis and characterization of novel bibenzimidazole oligomers and polymers as potential conjugated chelating ligands

[Structure: see text]. A simple and mild condensation route for the synthesis of novel bibenzimidazole oligomers and polymers is reported here using methyl 2,2,2-trichloroacetimidate as a key starting material. The dimer, trimer, tetramer, and polymers of bibenzimidazole were synthesized as a new series of potential conjugated chelating ligands for metallopolymer studies. The polymers show a maximum absorption at around 400 nm. The optical band gap of the polymer was estimated to be 2.68 eV.