Ligand substitution behavior of a simple model for coenzyme B12

The ligand substitution reactions of trans-[CoIII(en)2(Me)H2O]2+, a simple model for coenzyme B12, were studied for cyanide and imidazole as entering nucleophiles. It was found that these nucleophiles displace the coordinated water molecule trans to the methyl group and form the six-coordinate complex trans-[Co(en)2(Me)L]. The complex-formation constants for cyanide and imidazole were found to be (8.3 +/- 0.7) x 10(4) and 24.5 +/- 2.2 M-1 at 10 and 12 degrees C, respectively. The second-order rate constants for the substitution of water were found to be (3.3 +/- 0.1) x 10(3) and 198 +/- 13 M-1 s-1 at 25 degrees C for cyanide and imidazole, respectively. From temperature and pressure dependence studies, the activation parameters delta H++, delta S++, and delta V++ for the reaction of trans-[CoIII(en)2(Me)H2O]2+ with cyanide were found to be 50 +/- 4 kJ mol-1, 0 +/- 16 J K-1 mol-1, and +7.0 +/- 0.6 cm3 mol-1, respectively, compared to 53 +/- 2 kJ mol-1, -22 +/- 7 J K-1 mol-1, and +4.7 +/- 0.1 cm3 mol-1 for the reaction with imidazole. On the basis of reported activation volumes, these reactions follow a dissociative mechanism in which the entering nucleophile could be weakly bound in the transition state.     

Kinetics and mechanism of complex formation of nickel(II) with tetra-N-alkylated cyclam in N,N-dimethylformamide (DMF): comparative study on the reactivity and solvent exchange of the species Ni(DMF)6(2+) and Ni(DMF)5Cl+

13C NMR was used to study the rate of DMF exchange in the nickel(II) cation Ni(DMF)6(2+) and in the monochloro species Ni(DMF)5Cl+ with 13C-labeled DMF in the temperature range of 193-395 K in DMF (DMF = N,N-dimethylformamide). The kinetic parameters for solvent exchange are kex = (3.7 +/- 0.4) x 10(3) s-1, delta H++ = 59.3 +/- 5 kJ mol-1, and delta S++ = +22.3 +/- 14 J mol-1 K-1 for Ni(DMF)6(2+) and kex = (5.3 +/- 1) x 10(5) s-1, delta H++ = 42.4 +/- 4 kJ mol-1, and delta S++ = +6.7 +/- 15 J mol-1 K-1 for Ni(DMF)5Cl+. Multiwavelength stopped-flow spectrophotometry was used to study the kinetics of complex formation of the cation Ni(DMF)6(2+) and of the 100-fold more labile cation Ni(DMF)5Cl+ with TMC (1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) and TEC (1,4,8,11-tetraethyl-1,4,8,11-tetraazacyclotetradecane) in DMF at 298 K and I = 0.6 M (tetra-n-butylammoniumperchlorate). Equilibrium constants K for the addition of the nucleophiles DMF, Cl-, and Br- to the complexes Ni(TMC)2+ and Ni(TEC)2+ were determined by spectrophotometric titration. Formation of the complexes Ni(TMC)2+ and Ni(TEC)2+ was found to occur in two stages. In the initial stage, fast, second-order nickel incorporation with rate constants k1(TMC) = 99 +/- 5 M-1 s-1 and k1 (TEC) = 235 +/- 12 M-1 s-1 leads to the intermediates Ni(TMC)int2+ and Ni(TEC)int2+, which have N4-coordinated nickel. In the second stage, these intermediates rearrange slowly to form the stereochemically most stable configuration. First-order rate constants for the one-step rearrangement of Ni(TMC)int2+ and the two-step rearrangment of Ni(TEC)int2+ are presented. Because of the rapid formation of Ni(DMF)5Cl+, the reactions of Ni(DMF)6(2+) with TMC and TEC are accelerated upon the addition of tetra-n-butylammoniumchloride (TBACl) and lead to the complexes Ni(TMC)Cl+ and Ni(TEC)Cl+, respectively. For initial concentrations such that [TBACl]o/[nickel]o > or = 20, intermediate formation is 230 times (TMC) and 47 times (TEC) faster than in the absence of chloride. The mechanism of complex formation is discussed.     

Kinetic investigations of the process of encapsulation of small hydrocarbons into a cavitand-porphyrin

Exchange of guest molecules into capsule shaped host molecules is the most fundamental process in host-guest chemistry. Several examples of quantitative measurements of guest exchange rates have been reported. However, there have been no reports on the activation energies of these processes. A molecule known as cavitand-porphyrin (H2CP) has been reported to have a flexible host structure capable of facilitating moderate guest exchange rates suitable for kinetic measurements of the guest exchange process with 1H NMR. In this article, various kinetic and thermodynamic parameters related to the process of encapsulation of small hydrocarbons into H2CP in CDCl3 solution were determined by 2D exchange spectroscopy (EXSY): association and dissociation rate constants (k(ass) = 320 M-1 s-1, k(diss) = 1.4 s-1 for methane at 25 degrees C), the corresponding activation energies (E(a,ass) = 27 kJ.mol-1, E(a,diss) = 58 kJ.mol-1), and thermodynamic parameters for each process (DeltaG++(ass) = 59 kJ.mol-1, DeltaG++(diss) = 72 kJ.mol-1, DeltaH++(ass) = 25 kJ.mol-1, DeltaH++(diss) = 55 kJ.mol-1, DeltaS++(ass) = -113 J.K-1.mol-1, and DeltaH++(diss) = 58 J.K-1.mol-1 for methane). The thermodynamic parameters (DeltaG degrees = -13 kJ.mol-1, DeltaH degrees = -31 kJ.mol-1, DeltaS degrees = -60 J.K-1.mol-1 for methane) for this encapsulation equilibrium determined by EXSY were comparable to those for methane determined by 1D 1H NMR titration (DeltaG degrees = -11 kJ.mol-1, DeltaH degrees = -33 kJ.mol-1, DeltaS degrees = -75 J.K-1.mol-1 for methane). In addition, the structure of the methane encapsulation process was revealed by ab initio MO calculations. The activation energies for methane association/dissociation were estimated from MP2 calculations (E(a,ass) = 58.3 kJ.mol-1, E(a,diss) = 89.1 kJ.mol-1, and DeltaH degrees = -30.8 kJ.mol-1). These values are in accord with the experimentally determined values. The observed guest exchange rates and energies are compared with the corresponding values of various reported capsule-shaped hosts.     

New functional model complexes of intradiol-cleaving catechol dioxygenases: properties and reactivity of CuII(L)(O2Ncat)

Complexes Cu(O2Ncat)(tbeda) (1) and Cu(O2Ncat)(tmeda) (2) (tbeda = N,N,N',N'-tetrabenzylethylenediamine, tmeda=N,N,N',N'-tetramethylethylenenediamine, O2NcatH2=4-nitrocatechol) have been prepared by the reaction of copper(II) perchlorate with 4-nitrocatechol in the presence of triethylamine and the appropriate bidentate ligand. These compounds represent structural and functional model systems for the copper-containing catechol 1,2-dioxygenase. Both complexes have been structurally characterized by X-ray crystallography and by UV-vis, IR, and EPR spectroscopies. Upon protonation of 1 and 2 with perchloric acid, the bidentate coordination of O2Ncat could be reversible converted to the monodentate coordination of O2NcatH. The equilibrium constants were found to be 4200 and 3500, respectively, by measuring the UV-vis spectra in DMF. Back-titration with morpholine proved the reversibility of both reactions. Kinetic data on the oxygenation of 1 and 2 revealed overall second-order rate equations with kinetic parameters: ktbeda=(4.63+/-0.23)x10(-2) mol-1 dm3 s-1, DeltaH=51+/-6 kJ mol-1, DeltaS=-137+/-16 J mol-1 K-1; ktmeda=(0.89+/-0.23) mol-1 dm3 s-1, DeltaH=85+/-7 kJ mol-1, DeltaS=-57+/-19 J mol-1 K-1 at 365.16 K. Oxygenation of 1, 2, and [Cu(O2NcatH)(L)]ClO4 (L=tbeda, tmeda) in DMF solution at ambient conditions gives the corresponding intradiol ring-cleaved (2-nitro-muconato)copper(II) complexes. These data support the assumption that the reaction of the differently coordinated catecholate ligand with dioxygen shows only 1,2-dioxygenase activity.     

Elucidation of the solution structure and water-exchange mechanism of paramagnetic [Fe(II)(edta)(H(2)O)](2-)

The lability and structural dynamics of [Fe(II)(edta)(H(2)O)](2-) (edta = ethylenediaminetetraacetate) in aqueous solution strongly depend on solvent interactions. To study the solution structure and water-exchange mechanism, (1)H, (13)C, and (17)O NMR techniques were applied. The water-exchange reaction was studied through the paramagnetic effect of the complex on the relaxation rate of the (17)O nucleus of the bulk water. In addition to variable-temperature experiments, high-pressure NMR techniques were applied to elucidate the intimate nature of the water-exchange mechanism. The water molecule in the seventh coordination site of the edta complex is strongly labilized, as shown by the water-exchange rate constant of (2.7 +/- 0.1) x 106 s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH(not equal), DeltaS(not equal), and DeltaV(not equal) were found to be 43.2 +/- 0.5 kJ mol(-1), +23 +/- 2 J K(-1) mol(-1), and +8.6 +/- 0.4 cm(3) mol(-1), respectively, in line with a dissociatively activated interchange (Id) mechanism. The scalar coupling constant (A/h) for the Fe(II)-O interaction was found to be 10.4 MHz, slightly larger than the value A/h = 9.4 MHz for this interaction in the hexa-aqua Fe(II) complex. The solution structure and dynamics of [Fe(II)(edta)(H(2)O)](2-) were clarified by (1)H and (13)C NMR experiments. The complex undergoes a Delta,Lambda-isomerization process with interconversion of in-plane (IP) and out-of-plane (OP) positions. Acetate scrambling was also found in an NMR study of the corresponding NO complex, [Fe(III)(edta)(NO(-))](2-).     

A para-hydrogen investigation of palladium-catalyzed alkyne hydrogenation

The complexes [Pd(bcope)(OTf)2] (1a), where bcope is (C8H14)PCH2-CH2P(C8H14), and [Pd(tbucope)(OTf)2] (1b), where tbucope is (C8H14)PC6H4CH2P(tBu)2, catalyze the conversion of diphenylacetylene to cis- and trans-stilbene and 1,2-diphenylethane. When this reaction was studied with para-hydrogen, the characterization of [Pd(bcope)(CHPhCH2Ph)](OTf) (2a) and [Pd(tbucope)(CHPhCH2Ph)](OTf) (2b) was achieved. Magnetization transfer from the alpha-H of the CHPhCH2Ph ligands in these species proceeds into trans-stilbene. This process has a rate constant of 0.53 s-1 at 300 K in methanol-d4 for 2a, where DeltaH = 42 +/- 9 kJ mol-1 and DeltaS = -107 +/- 31 J mol-1 K-1, but in CD2Cl2 the corresponding rate constant is 0.18 s-1, with DeltaH = 79 +/- 7 kJ mol-1 and DeltaS = 5 +/- 24 J mol-1 K-1. The analogous process for 2b was too fast to monitor in methanol, but in CD2Cl2 the rate constant for trans-stilbene formation is 1.04 s-1 at 300 K, with DeltaH = 94 +/- 6 kJ mol-1 and DeltaS = 69 +/- 22 J mol-1 K-1. Magnetization transfer from one of the two inequivalent beta-H sites of the CHPhCH2Ph moiety proceeds into trans-stilbene, while the other site shows transfer into H2 or, to a lesser extent, cis-stilbene in CD2Cl2, but in methanol it proceeds into the vinyl cations [Pd(bcope)(CPh=CHPh)(MeOD)](OTf) (3a) and [Pd(tbucope)(CPh=CHPh)(MeOD)](OTf) (3b). When the same magnetization transfer processes are monitored for 1a in methanol-d4 containing 5 microL of pyridine, transfer into trans-stilbene is observed for two sites of the alkyl, but the third proton now becomes a hydride ligand in [Pd(bcope)(H)(pyridine)](OTf) (5a) or a vinyl proton in [Pd(bcope)(CPh=CHPh)(pyridine)](OTf) (4a). For 1b, under the same conditions, two isomers of [Pd(tbucope)(H)(pyridine)](OTf) (5b and 5b') and the neutral dihydride [Pd(tbucope)(H)2] (7) are detected. The single vinylic CH proton in 3 and the hydride ligands in 4 and 5 appear as strong emission signals in the corresponding 1H NMR spectra.     

Mechanistic investigation of the oxygen-atom-transfer reactivity of dioxo-molybdenum(VI) complexes

The oxygen-atom-transfer (OAT) reactivity of [LiPrMoO2(OPh)] (1, LiPr=hydrotris(3-isopropylpyrazol-1-yl)borate) with the tertiary phosphines PEt3 and PPh2Me in acetonitrile was investigated. The first step, [LiPrMoO2(OPh)]+PR3-->[LiPrMoO(OPh)(OPR3)], follows a second-order rate law with an associative transition state (PEt3, DeltaH not equal=48.4 (+/-1.9) kJ mol-1, DeltaS not equal=-149.2 (+/-6.4) J mol-1 K-1, DeltaG not equal=92.9 kJ mol-1; PPh2Me, DeltaH not equal=73.4 (+/-3.7) kJ mol-1, DeltaS not equal=-71.9 (+/-2.3) J mol-1 K-1, DeltaG not equal=94.8 kJ mol-1). With PMe3 as a model substrate, the geometry and the free energy of the transition state (TS) for the formation of the phosphine oxide-coordinated intermediate were calculated. The latter, 95 kJ mol-1, is in good agreement with the experimental values. An unexpectedly large O-P-C angle calculated for the TS suggests that there is significant O-nucleophilic attack on the P--C sigma* in addition to the expected nucleophilic attack of the P on the Mo==O pi*. The second step of the reaction, that is, the exchange of the coordinated phosphine oxide with acetonitrile, [LiPrMoO(OPh)(OPR3)]+MeCN-->[LiPrMoO(OPh)(MeCN)]+OPR3, follows a first-order rate law in MeCN. A dissociative interchange (Id) mechanism, with activation parameters of DeltaH not equal=93.5 (+/-0.9) kJ mol-1, DeltaS not equal=18.2 (+/-3.3) J mol-1 K-1, DeltaG not equal=88.1 kJ mol-1 and DeltaH not equal=97.9 (+/-3.4) kJ mol-1, DeltaS not equal=47.3 (+/-11.8) J mol-1 K-1, DeltaG not equal=83.8 kJ mol-1, for [LiPrMoO(OPh)(OPEt3)] (2 a) and [LiPrMoO(OPh)(OPPh2Me)] (2 b), respectively, is consistent with the experimental data. Although gas-phase calculations indicate that the Mo--OPMe3 bond is stronger than the Mo--NCMe bond, solvation provides the driving force for the release of the phosphine oxide and formation of [LiPrMoO(OPh)(MeCN)] (3).     

Hydrogen atom transfer from iron(II)-tris[2,2'-bi(tetrahydropyrimidine)] to TEMPO: a negative enthalpy of activation predicted by the Marcus equation

The transfer of a hydrogen atom from iron(II)-tris[2,2'-bi(tetrahydropyrimidine)], [FeII(H2bip)3]2+, to the stable nitroxide, TEMPO, was studied by stopped-flow UV-vis spectrophotometry. The products are the deprotonated iron(III) complex [FeIII(H2bip)2(Hbip)]2+ and the hydroxylamine, TEMPO-H. This reaction can also be referred to as proton-coupled electron transfer (PCET). The equilibrium constant for the reaction is close to 1; thus, the reaction can be driven in either direction. The rate constants for the forward and reverse reactions at 298 K are k1 = 260 +/- 30 M-1 s-1 and k-1 = 150 +/- 20 M-1 s-1. Interestingly, the rate constant for the forward reaction decreases as reaction temperature is increased, implying a negative activation enthalpy: DeltaH1 = -2.7 +/- 0.4 kcal mol-1, DeltaS1 = -57 +/- 8 cal mol-1 K-1. Marcus theory predicts this unusual temperature dependence on the basis of independently measured self-exchange rate constants and equilibrium constants: DeltaHcalcd = -3.5 +/- 0.5 kcal mol-1, DeltaScalcd = -42 +/- 10 cal mol-1 K-1. This result illustrates the value of the Marcus approach for these types of reactions. The dominant contributor to the negative activation enthalpy is the favorable enthalpy of reaction, DeltaH1 degrees = -9.4 +/- 0.6 kcal mol-1, rather than the small negative activation enthalpy for the H-atom self-exchange between the iron complexes.     

Kinetic and computational study of dissociative substitution and phosphine exchange at tetrahedrally distorted cis-Pt(SiMePh2)2(PMe2Ph)2

The substitution kinetics of Me2PhP in cis-Pt(SiMePh2)2(PMe2Ph)2 (1) by the chelating ligand bis(diphenylphosphino)ethane has been followed at 25.0 degrees C in dichloromethane by stopped-flow spectrophotometry. Addition of the leaving ligand causes mass-law retardation compatible with a dissociative process via a three-coordinate transition state or intermediate. Exchange of Me2PhP in 1 has been studied by variable-temperature magnetization transfer 1H NMR in toluene-d8, giving kex326 = 1.76 +/- 0.12 s-1, delta H++ = 117.8 +/- 2.1 kJ mol-1, and delta S++ = 120 +/- 7 J K-1 mol-1. An exchange rate constant independent of the concentrations of free phosphine, a strongly positive delta S++, and nearly equal exchange and ligand dissociation rate constants also support a dissociative process. Density functional theory (DFT) calculations for a dissociative process give an estimate for the Pt-P bond energy of 98 kJ mol-1 for R = R' = Me, which is in reasonable agreement with the experimental activation energy given the differences between the substituents used in the calculation and those employed experimentally. DFT calculations on cis-Pt(PR3)2(SiR'3)2 (R = H, CH3; R' = H, CH3) are consistent with the experimental molecular structure and show that methyl substituents on the Si donors are sufficient to induce the observed tetrahedral twist. The optimized Si-Pt-Si angle in cis-Pt(SiH3)2(PH3)2 is not significantly altered by changing the P-Pt-P angle from its equilibrium value of 104 degrees to 80 degrees or 120 degrees. The origin of the tetrahedral twist is therefore not steric but electronic. The Si-Pt-Si angle is consistently less than 90 degrees, but the Si-Si distance is still too long to support an incipient reductive elimination reaction with its attendant Si-Si bonding interaction. Instead, it appears that four tertiary ligands introduce a steric strain which can be decreased by a twist of two of the ligands out of the plane; this twist is only possible when two strong sigma donors are cis to each other, causing a change in the metal's hybridization.     

Copper(I) and copper(II) complexes possessing cross-linked imidazole-phenol ligands: structures and dioxygen reactivity

Catalytic reduction of O2 to H2O, and coupling to membrane proton translocation, occurs at the heterobinuclear heme a3-CuB active site of cytochrome c oxidase. One of the CuB ligated histidines is cross-linked to a neighboring tyrosine (C-N bond; tyrosine C6 and histidine epsilon-nitrogen), and the protic residue of this cross-linked His-Tyr moiety is proposed to participate as both an electron and a proton donor in the catalytic dioxygen reduction event. To provide insight into the chemistry of such a moiety, we have synthesized and characterized tetra- and tridentate pyridylalkylamine chelate ligands {LN4OR and LN3OR (R = H or Me)}, which include an imidazole-phenol (or anisole) cross-link and their copper(I/II) complexes. [CuI(LN4OH)]B(C6F5)4 (1) reacts with dioxygen at -80 degrees C in THF, forming an unstable trans-mu-1,2-peroxodicopper(II)complex, which subsequently converts to a dimeric copper(II)-phenolate complex [{Cu(LN4O-)}2](B(C6F5)4)2 (5a). The close analogue [CuI(LN4OMe)]B(C6F5)4 (3) binds dioxygen reversibly at -80 degrees C in tetrahydrofuran. Stopped-flow kinetics of the reaction [CuI(LN3OH)]ClO4 (2) with O2 in CH2Cl2 indicate a steady formation of the purple dimeric product [{Cu(LN3O-)}2](ClO4)2 (5b), which has been analyzed in the temperature range from -40 to +20 degrees C, DeltaH = -9.6 (6) kJ mol-1, DeltaS = -168 (2) J mol-1 K-1 (k(-40 degrees C) = 1.05(4) x 106 and k(+20 degrees C) = 4.6(2) x 105 M-2 s-1). The X-ray crystal structures of 1, [CuII(LN3OH)(MeOH)(OClO3-)](ClO4) (4), 5a, and 5b are reported.     

Thermodynamic aspects of fatty acids binding to human serum albumin: a microcalorimetric investigation.

Thermodynamic parameters have been evaluated for the binding interaction between human serum albumin (HSA) and unbranched fatty acids (FFA) on the basis of a flow microcalorimetric measurement at pH 7.4 and 37 degrees C by computer-fitting to single- and two-class binding models. The heat of binding increased exothermically with increasing alkyl chain length. FFA with nine or less carbons bound to only one class of binding sites (n = 2) with a binding constant (K) of 10(4) M-1. FFA with ten or more carbons bound to the first class of binding sites with high affinity K in the older of 10(5) to 10(6) M-1, and to the second class with a lower affinity and high capacity. The free energy change of the first class of binding sites (delta G1) became more negative as the chain length of FFA was increased. The enthalpy change per mol of FFA (delta H) decreased at the rate of -7.47 kJ.mol-1.CH-1(2) to a minimum at C9 and then increased due to the hydrophobicity of alkyl chains. Compensation analysis for the i th class of HSA molecule by plotting molar changes of enthalpy (delta Hmi) against entropy (delta Smi) and free energy (delta Gmi) indicates two distinct binding sites. The first class (i = 1) of the long-chain FFA on HSA is an entropy-driven reaction associated with nearly constant values of delta Hm1 (-43.0 +/- 4.8 kJ.mol-1), slightly negative values of delta Sm1 (-47.4 less than or equal to delta Sm1 less than or equal to -8.1 J.mol-1.K-1) and -delta Gm1 values, increasing with increasing alkyl chain length. The second class (i = 2) of the long-chain FFA may lie in the same region as the binding sites of the short- and medium-chain FFA with a linear relationship between delta Hmi-delta Smi.     

Bimetallo-radical carbon-hydrogen bond activation of methanol and methane

Carbon-hydrogen bond cleavage reactions of CH3OH and CH4 by a dirhodium(II) diporphyrin complex with a m-xylyl tether (.Rh(m-xylyl)Rh.(1)) are reported. Kinetic-mechanistic studies show that the substrate reactions are bimolecular and occur through the use of two Rh(II) centers in the molecular unit of 1. Second-order rate constants (T = 296 K) for the reactions of 1 with methanol (k(CH3OH) = 1.45 x 10-2 M-1 s-1) and methane (k(CH4) = 0.105 M-1 s-1) show a clear kinetic preference for the methane activation process. The methanol and methane reactions with 1 have large kinetic isotope effects (k(CH3OH)/k(CD3OD) = 9.7 +/- 0.8, k(CH4)/k(CD4) = 10.8 +/- 1.0, T = 296 K), consistent with a rate-limiting step of C-H bond homolysis through a linear transition state. Activation parameters for reaction of 1 with methanol (DeltaH = 15.6 +/- 1.0 kcal mol-1; DeltaS = -14 +/- 5 cal K-1 mol-1) and methane (DeltaH = 9.8 +/- 0.5 kcal mol-1; DeltaS = -30 +/- 3 cal K-1 mol-1) are reported.     

Kinetics of manganese(III) acetate in acetic acid: generation of Mn(III) with Co(III), Ce(IV), and dibromide radicals; reactions of Mn(III) with Mn(II), Co(II), hydrogen bromide,and alkali bromides

The reaction of cobalt(III) acetate with excess manganese(II) acetate in acetic acid occurs in two stages, since the two forms Co(IIIc) and Co(IIIs) are not rapidly equilibrated and thus react independently. The rate constants at 24.5 degrees C are kc = 37.1 +/- 0.6 L mol-1 s-1 and ks = 6.8 +/- 0.2 L mol-1 s-1 at 24.5 degrees C in glacial acetic acid. The Mn(III) produced forms a dinuclear complex with the excess of Mn(II). This was studied independently and is characterized by the rate constant (3.43 +/- 0.01) x 10(2) L mol-1 s-1 at 24.5 degrees C. A similar interaction between Mn(III) and Co(II) is substantially slower, with k = (3.73 +/- 0.05) x 10(-1) L mol-1 s-1 at 24.5 degrees C. Mn(II) is also oxidized by Ce(IV), according to the rate law -d[Ce(IV)]/dt = k[Mn(II)]2[Ce(IV)], where k = (6.0 +/- 0.2) x 10(4) L2 mol-2 s-1. The reaction between Mn(II) and HBr2., believed to be involved in the mechanism by which Mn(III) oxidizes HBr, was studied by laser photolysis; the rate constant is (1.48 +/- 0.04) x 10(8) L mol-1 s-1 at approximately 23 degrees C in HOAc. Oxidation of Co(II) by HBr2. has the rate constant (3.0 +/- 0.1) x 10(7) L mol-1 s-1. The oxidation of HBr by Mn(III) is second order with respect to [HBr]; k = (4.10 +/- 0.08) x 10(5) L2 mol-2 s-1 at 4.5 degrees C in 10% aqueous HOAc. Similar reactions with alkali metal bromides were studied; their rate constants are 17-23 times smaller. This noncomplementary reaction is believed to follow that rate law so that HBr2. and not Br. (higher in Gibbs energy by 0.3 V) can serve as the intermediate. The analysis of the reaction steps then requires that the oxidation of HBr2. to Br2 by Mn(III) be diffusion controlled, which is consistent with the driving force and seemingly minor reorganization.     

Solvent effects on the oxidation of RuIV=O to O=RuVI=O by MnO4-. hydrogen-atom versus oxygen-atom transfer

The kinetics of the oxidation of trans-[RuIV(tmc)(O)(solv)]2+ to trans-[RuVI(tmc)(O)2]2+ (tmc is 1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane, a tetradentate macrocyclic tertiary amine ligand; solv = H2O or CH3CN) by MnO4- have been studied in aqueous solutions and in acetonitrile. In aqueous solutions the rate law is -d[MnO4]/dt = kH2O[RuIV][MnO4-] = (kx + (ky)/(Ka)[H+])[RuIV][MnO4-], kx = (1.49 +/- 0.09) x 101 M-1 s-1 and ky = (5.72 +/- 0.29) x 104 M-1 s-1 at 298.0 K and I = 0.1 M. The terms kx and ky are proposed to be the rate constants for the oxidation of RuIV by MnO4- and HMnO4, respectively, and Ka is the acid dissociation constant of HMnO4. At [H+] = I = 0.1 M, DeltaH and DeltaS are (9.6 +/- 0.6) kcal mol-1 and -(18 +/- 2) cal mol-1 K-1, respectively. The reaction is much slower in D2O, and the deuterium isotope effects are kx/kxD = 3.5 +/- 0.1 and ky/kyD = 5.0 +/- 0.3. The reaction is also noticeably slower in H218O, and the oxygen isotope effect is kH216O/kH218O = 1.30 +/- 0.07. 18O-labeled studies indicate that the oxygen atom gained by RuIV comes from water and not from KMnO4. These results are consistent with a mechanism that involves initial rate-limiting hydrogen-atom abstraction by MnO4- from coordinated water on RuIV. In acetonitrile the rate law is -d[MnO4-]/dt = kCH3CN[RuIV][MnO4-], kCH3CN = 1.95 +/- 0.08 M-1 s-1 at 298.0 K and I = 0.1 M. DeltaH and DeltaS are (12.0 +/- 0.3) kcal mol-1 and -(17 +/- 1) cal mol-1 K-1, respectively. 18O-labeled studies show that in this case the oxygen atom gained by RuIV comes from MnO4-, consistent with an oxygen-atom transfer mechanism.     

Kinetics and mechanisms of reactions of methyldioxorhenium(V) in aqueous solutions: dimer formation and oxygen-atom abstraction reactions

The stable compound CH3ReO3 (MTO), upon treatment with aqueous hypophosphorous acid, forms a colorless metastable species designated MDO, CH3ReO2(H2O)n (n = 2). After standing, MDO is first converted to a yellow dimer (lambda max = 348 nm; epsilon = 1.3 x 10(4) L mol-1 cm-1). That reaction follows second-order kinetics with k = 1.4 L mol-1 s-1 in 0.1 M aq trifluoromethane sulfonic acid at 298 K. Kinetics studies as functions of temperature gave delta S++ = -4 +/- 15 J K-1 mol-1 and delta H++ = 71.0 +/- 4.6 kJ mol-1. A much more negative value of delta S++ would be expected for simple dimerization, suggesting the release of one or more molecules of water in forming the transition state. If solutions of the dimer are left for a longer period, an intense blue color results, followed by precipitation of a compound that does, even after a long time, retain the Re-CH3 bond in that aq. hydrogen peroxide generates the independently known CH3Re(O)(O2)2(H2O). The blue compound may be analogous to the intensely colored purple cation [(Cp*Re)3(mu 2-O)3(mu 3-O)3ReO3]+. If a pyridine N-oxide is added to the solution of the dimer, it is rapidly but not instantaneously lost at the same time that a catalytic cycle, separately monitored by NMR, converts the bulk of the PyO to Py according to this stoichiometric equation in which MDO is the active intermediate: C5H5NO + H3PO2-->C5H5N + H3PO3. A thorough kinetic study and the analysis by mathematical and numerical simulations show that the key step is the conversion of the dimer D into a related species D* (presumably one of the two mu-oxo bonds has been broken); the rate constant is 5.6 x 10(-3) s-1. D* then reacts with PyO just as rapidly as MDO does. This scheme is able to account for the kinetics and other results.     

Thermodynamics and kinetics of the nickel(II)-salicylhydroxamic acid system. Phenol rotation induced by metal ion binding

The kinetics and the equilibria of Ni(II) binding to p-hydroxybenzohydroxamic acid (PHBHA) and salicylhydroxamic acid (SHA) have been investigated in an aqueous solution at 25 degrees C and I=0.2 M by the stopped-flow method. Two reaction paths involving metal binding to the neutral acid and to its anion have been observed. Concerning PHBHA, the rate constants of the forward and reverse steps are k1=(1.9+/-0.1)x10(3) M-1 s-1 and k-1=(1.1+/-0.1)x10(2) s-1 for the step involving the undissociated PHBHA and k2=(3.2+/-0.2)x10(4) M-1 s-1 and k-2=1.2+/-0.2 s-1 for the step involving the anion. Concerning SHA, the analogous rate constants are k1=(2.6+/-0.1)x10(3) M-1 s-1, k-1=(1.3+/-0.1)x10(3) s-1, k2=(5.4+/-0.2)x10(3) M-1 s-1, and k-2=6.3+/-0.5 s-1. These values indicate that metal binding to the anions of the two acids concurs with the Eigen-Wilkins mechanism and that the phenol oxygen is not involved in the chelation. Moreover, a slow effect was observed in the SHA-Ni(II) system, which has been put down to rotation of the benzene ring around the C-C bond. Quantum mechanical calculations at the B3LYP/lanL2DZ level reveal that the phenol group in the most stable form of the Ni(II) chelate is in trans position relative to the carbonyl oxygen, contrary to the free SHA structure, where the phenol and carbonyl oxygen atoms both have cis configuration. These results bear out the idea that the complex formation is coupled with phenol rotation around the C-C bond.     

Dioxygen-binding kinetics and thermodynamics of a series of dicopper(I) complexes with bis[2-(2-pyridyl)ethyl]amine tridendate chelators forming side-on peroxo-bridged dicopper(II) adducts

Copper-dioxygen interactions are of interest due to their importance in biological systems as reversible O2- carriers, oxygenases, or oxidases and also because of their role in industrial and laboratory oxidation processes. Here we report on the kinetics (stopped-flow, -90 to 10 degrees C) of O2-binding to a series of dicopper(I) complexes, [Cu2(Nn)(MeCN)2]2+ (1Nn) (-(CH2)n- (n = 3-5) linked bis[(2-(2-pyridyl)ethyl]amine, PY2) and their close mononuclear analogue, [(MePY2)Cu(MeCN)]+ (3), which form mu-eta 2:eta 2-peroxodicopper(II) complexes [Cu2(Nn)-(O2)]2+ (2Nn) and [(MePY2)Cu]2(O2)]2+ (4), respectively. The overall kinetic mechanism involves initial reversible (k+,open/k-,open) formation of a nondetectable intermediate O2-adduct [Cu2(Nn)(O2)]2+ (open), suggested to be a CuI...CuII-O2- species, followed by its reversible closure (k+,closed/k-,closed) to form 2Nn. At higher temperatures (253 to 283 K), the first equilibrium lies far to the left and the observed rate law involves a simple reversible binding equilibrium process (kon,high = (k+,open/k-,open)(k+,closed)). From 213 to 233 K, the slow step in the oxygenation is the first reaction (kon,low = k+,open), and first-order behavior (in 1Nn and O2) is observed. For either temperature regime, the delta H++ for formation of 2Nn are low (delta H++ = -11 to 10 kJ/mol; kon,low = 1.1 x 10(3) to 4.1 x 10(3) M-1 s-1, kon,high = 2.2 x 10(3) to 2.8 x 10(4) M-1 s-1), reflecting the likely occurrence of preequilibria. The delta H degree ranges between -81 and -84 kJ mol-1 for the formation of 2Nn, and the corresponding equilibrium constant (K1) increases (3 x 10(8) to 5 x 10(10) M-1; 183 K) going from n = 3 to 5. Below 213 K, the half-life for formation of 2Nn increases with, rather than being independent of, the concentration of 1Nn, probably due to the oligomerization of 1Nn at these temperatures. The O2 reaction chemistry of 3 in CH2Cl2 is complicated, including the presence of induction periods, and could not be fully analyzed. However, qualitative comparisons show the expected slower intermolecular reaction of 3 with O2 compared to the intramolecular first-order reactions of 1Nn. Due to the likelihood of the partial dimerization of 3 in solution, the t1/2 for the formation of 4 remains constant with increasing complex concentration rather than decreasing. Acetonitrile significantly influences the kinetics of the O2 reactions with 1Nn and 3. For 1N4, the presence of MeCN inhibits the formation of a previously (Jung et al, J. Am. Chem. Soc. 1996, 118, 3763-3764) observed intermediate. Small amounts of added MeCN considerably slow the oxygenation rates of 3, inhibit its full formation to 4, and increase the length of the induction period. The results for 1Nn and their mononuclear analogue 3 are presented, and they are compared with each other as well as with other dinucleating dicopper(I) systems.     

Time-resolved infrared spectroscopic study of reactive acyl intermediates relevant to cobalt-catalyzed carbonylations

Time-resolved infrared spectroscopic studies have been used to characterize the reactive intermediate CH3C(O)Co(CO)2PPh3 (ICo), which is relevant to the mechanism of the catalysis of alkene hydroformylation by the phosphine-modified cobalt carbonyls. Step-scan FTIR and (variable) single-frequency time-resolved infrared detection on the microsecond time scale were used to record the spectrum of ICo and to demonstrate that the principal photoproduct of the subsequent reaction of this species at PCO = 1 atm is the methyl cobalt complex CH3Co(CO)3PPh3 (MCo). At higher PCO the trapping of ICo with CO to re-form CH3C(O)Co(CO)3PPh3 (ACo) (rate = kCO[CO][ICo]) was shown to become competitive with the rate of acetyl-to-cobalt methyl migration to give MCo (rate = kM[ICo]). Activation parameters for the competing pathways in benzene were determined to be delta H++CO = 57 +/- 04 kJ mol-1, delta S++CO = -91 +/- 12 J mol-1 K-1 and delta H++M = 40 +/- 2 kJ mol-1, delta S++M = -19 +/- 5 J mol-1 K-1. The effects of varying the solvent on the competitive reactions of ICo were also explored, and the mechanistic implications of these results are discussed.     

Iron substitution for sodium in a carboxylate-bridged, heterodinuclear sodium-iron complex

The synthesis and structural characterization of the carboxylate-bridged, heterodinuclear iron-sodium complex [NaFe(PIC2DET)(mu-O2CTrp)3] (2), where PIC2DET (1) is a 2,3-diethynyltriptycene-linked dipicolinic methyl ester ligand and Trp is 9-triptycenyl, are described. The metal ions in 2 are bridged by three triptycene carboxylates with an Fe...Na distance of 3.181(2) A, and each is coordinated to a pyridine nitrogen and carbonyl oxygen atom of 1, forming two five-membered chelate rings. A linkage isomer in which Fe1 is bound by the other ester oxygen atom of 1 was identified by X-ray crystallographic analysis. Treatment of 2 with Fe(OTf)2.2MeCN resulted in substitution of sodium by iron(II) to give the cationic diiron(II) complex [Fe2(PIC2DET)(mu-O2CTrp)3][OTf] (3). This reaction was investigated by UV-vis, IR, MS, and stopped-flow spectroscopy. The substitution is first order with respect to 2 and zero order with respect to Fe(OTf)2.2MeCN (kobs = 21 +/- 2 s-1), consistent with a dissociative mechanism. A positive enthalpy of activation (DeltaH = 59 +/- 6 kJ mol-1) and negative entropy of activation (DeltaS = -20 +/- 6 J mol-1 K-1) were calculated from the temperature dependence of the rate-determining dissociation step.     

Thermochemistry and gas-phase ion energetics of 2-hydroxy-4-methoxy-benzophenone (oxybenzone)

We have investigated the thermochemistry and ion energetics of the oxybenzone (2-hydroxy-4-methoxy-benzophenone, C14H12O3, 1H) molecule. The following parameters have been determined for this species: gas-phase enthalpy for the of neutral molecule at 298.15K, (Delta(f)H0(m)(g) = -303.5 +/- 5.1 kJ x mol-1), the intrinsic (gas-phase) acidity (GA(1H) = 1402.1 +/- 8.4 kJ x mol-1), enthalpy of formation for the oxybenzone anion (Delta(f)H0(m)(1-,g) = -402.3 +/- 9.8 kJ x mol-1). We also have obtained the enthalpy of formation of, 4-hydroxy-4'-methoxybenzophenone (Delta(f)H0(m)(g) = -275.4 +/- 10 kJ x mol-1) and 3-methoxyphenol anion (Delta(f)H0(m)(C7H7O2-,g) = -317.7 +/- 8.7 kJ x mol-1). A reliable experimental estimation of enthalpy related to intramolecular hydrogen bonding in oxybenzone has also been obtained (30.1 +/- 6.3 kJ x mol-1) and compared with our theoretical calculations at the B3LYP/6-311++G** level of theory, by means of an isodesmic reaction scheme. In addition, heat capacities, temperature, and enthalpy of fusion have been determined for this molecule by differential scanning calorimetry.