Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

Controlled loading and release of methylene blue from LbL polyurethane/poly(acrylic acid) film

The layer‐by‐layer (LbL) assembled multilayer films are widely used in the biomedical field for the controlled drug delivery. Here, multilayer films were assembled by LbL technique through alternating deposition of cationic polyurethane (PU) and poly(acrylic acid) (PAA) on glass slides. Methylene blue (MB) was used as a model drug to investigate the loading and release ability of the prepared multilayer film. The results showed that the loading rate and loading amount of MB were greatly influenced by pH value of the dye solution, and the release rate of MB was controlled both by ionic strength and pH value of immersing solution. The result also indicated that the film had a good reversibility of drug loading and release. It suggested that the PU/PAA multilayer film had potential applications in drug delivery and controlled release. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of polyelectrolyte multilayer films comprising nanoblended layers

Polyelectrolyte multilayer thin films were prepared via the alternate deposition of poly(allylamine hydrochloride) (PAH) and a blend of poly(acrylic acid) (PAA) and poly(styrenesulfonate) (PSS). When the pH of the blend solution was 3.5, the presence of PAA in this solution significantly increased the total film thickness. With only 10 wt % PAA in the blend adsorption solution, a large increase in film thickness was observed (92 nm cf. 18 nm). It was also demonstrated that the total amount of PSS adsorbed was enhanced by the presence of PAA in the blend solution, showing that the blend solution composition influenced that of the multilayer films. Thin films prepared with nanoblended layers also showed improved pH stability, because they exhibited reduced film rearrangement upon exposure to acidic conditions (pH = 2.5).     

Amperometric uric acid sensors based on polyelectrolyte multilayer films

Uricase (UOx) and polyelectrolyte were used for preparation of a permselective multilayer film and enzyme multilayer films on a platinum (Pt) electrode, allowing the detection of uric acid amperometrically. The polyelectrolyte multilayer (PEM) film composed of poly(allylamine) (PAA) and poly(vinyl sulfate) (PVS) were prepared via layer-by-layer assembly on the electrode, functioning as H₂O₂-selective film. After deposition of the permselective film (PAA/PVS)₂PAA, UOx and PAA were deposited via layer-by-layer sequential deposition up to 10 UOx layers to prepare amperometric sensors for uric acid. Current response to uric acid was recorded at +0.6 V vs. Ag/AgCl to detect H₂O₂ produced from the enzyme reaction. The response current increased with increasing the number of UOx layers. Even in the presence of ascorbic acid, uric acid can be detected over the concentration range 10⁻⁶-10⁻³ M. The response current and deposited amount of UOx were affected by deposition bath pH and the addition of salt. The deposition of PAA/UOx film prepared in 2 mg ml⁻¹ solution (pH 11) of PAA with NaCl (8 mg ml⁻¹) and 0.1 mg ml⁻¹ solution (pH 8.5) of UOx with borate (100 mM) resulted in an electrode which shows the largest response to uric acid. The response of the sensor to uric acid was decreased by 40% from the original activity after 30 days.     

Fabrication of a Covalently Attached Multilayer Film via In‐Situ Reaction

A covalently linked ultrathin multilayer film was fabricated from 2‐nitro‐N‐methyl‐diphenylamine‐4‐diazonium‐formaldehyde resin (NDR) and phenol‐formaldehyde resin (PR) in methanol in‐situ. The UV‐vis, XRD, AFM and FTIR show that this multilayer is of high regularity, smoothness and stability.     

Au nanoparticle micropatterns prepared from self-assembled films

A kind of hybrid multilayer film based on mercaptobenzoic acid-capped Au nanoparticles (MBA-Au-NPs) and photoreactive nitrodiazoresin (NDR) has been fabricated via electrostatic self-assembly. Upon exposure to UV light, the initial ionic bonds between the layers of the film convert into covalent bonds and the film stability toward polar solvents, salt, or surfactant solutions increases significantly. The micropatterned NDR/MBA-Au-NP film with the covalently linked architecture was formed by selecting exposure of the film through a photomask and later developed in sodium dodecyl sulfate (SDS) aqueous solution. The metallic Au-NP micropatterns, furthermore, are produced by sintering the micropatterned NDR/MBA-Au-NP film at 550 degrees C, at which the organic components are removed completely. The well-defined micropatterns were characterized with atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), microscope with a charge-coupled device (CCD) camera, and X-ray photoelectron spectroscopy (XPS).     

Room-temperature imprinting poly(acrylic acid)/poly(allylamine hydrochloride) multilayer films by using polymer molds

Layer-by-layer assembled polyelectrolyte multilayer films of poly(acrylic acid) (PAA)/poly(allylamine hydrochloride) (PAH) have been successfully patterned by room-temperature imprinting using a Norland Optical Adhesives (NOA 63) polymer mold. The proper amount of water in the PAA/PAH multilayer film can decrease the viscosity of the film and facilitate the imprinting. Many factors, such as imprinting pressure, length of imprinting time, and the structure and size of the patterns in the polymer mold, can produce an influence on the final imprinted pattern structures on multilayer films. A high imprinting pressure of 100 bar and elongated imprinting time of several hours is needed to achieve a patterned PAA/PAH multilayer film with a feature size of several tens of micrometers. With a twice imprinting, grid structures can be successfully produced when a NOA 63 mold having line structures is used. Room-temperature imprinting by using polymer NOA 63 mold provides a facile way to fabricate layered polymeric films with various kinds of pattern structures.     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.     

Polyelectrolyte blend multilayer films: surface morphology, wettability, and protein adsorption characteristics

We report the influence of polyelectrolyte (PE) multilayer films prepared from poly(styrene sulfonate)-poly(acrylic acid) (PSS-PAA) blends, deposited in alternation with poly(allylamine hydrochloride) (PAH), on film wettability and the adsorption behavior of the protein immunoglobulin G (IgG). Variations in the chemical composition of the PAH/(PSS-PAA) multilayer films, controlled by the PSS/PAA blend ratio in the dipping solutions, were used to systematically control film thickness, surface morphology, surface wettability, and IgG adsorption. Spectroscopic ellipsometry measurements indicate that increasing the PSS content in the blend solutions results in a systematic decrease in film thickness. Increasing the PSS content in the blend solutions also leads to a reduction in film surface roughness (as measured by atomic force microscopy), with a corresponding increase in surface hydrophobicity. Advancing contact angles (theta) range from 7 degrees for PAH/PAA films through to 53 degrees for PAH/PSS films. X-ray photoelectron spectroscopy measurements indicate that the increase in film hydrophobicity is due to an increase in PSS concentration at the film surface. In addition, the influence of added electrolyte in the PE solutions was investigated. Adsorption from PE solutions containing added salt favors PSS adsorption and results in more hydrophobic films. The amount of IgG adsorbed on the multilayer films systematically increased on films assembled from blends with increasing PSS content, suggesting strong interactions between PSS in the multilayer films and IgG. Hence, multilayer films prepared from blended PE solutions can be used to tune film thickness and composition, as well as wetting and protein adsorption characteristics.     

Synthesis, multilayer film assembly, and capsule formation of macromolecularly engineered acrylic acid and styrene sulfonate block copolymers

We report the use of copolymers synthesized with specific block ratios of weakly and strongly charged groups for the preparation of stable, pH-responsive multilayers. In this study, we utilized reversible addition-fragmentation chain transfer (RAFT) polymerization in the synthesis of novel pH-sensitive copolymers comprising block domains of acrylic acid (AA) and styrene sulfonate (SS) groups. The PAA x- b-SS y copolymers, containing 37%, 55%, and 73% of AA groups by mass (denoted as PAA 37- b-SS 63, PAA 55- b-SS 45, and PAA 73- b-SS 27, respectively), were utilized to perform stepwise multilayer assembly in alternation with poly(allylamine hydrochloride), PAH. The ratio of AA to SS groups, and the effect of the pH of both anionic and cationic adsorption solutions, on multilayer properties, were investigated using ellipsometry and atomic force microscopy. The presence of SS moieties in the PAA x- b-SS y copolymers, regardless of the precise composition, lead to films with a relatively consistent thickness. Exposure of these multilayers to acidic conditions postassembly revealed that these multilayers do not exhibit the characteristic large swelling that occurs with PAA/PAH films. The film stability was attributed to the presence of strongly charged SS groups. PAA x- b-SS y/PAH films were also formed on particle substrates under various adsorption conditions. Microelectrophoresis measurements revealed that the surface charge and isoelectric point of these core-shell particles are dependent on assembly pH and the proportion of AA groups in PAA x- b-SS y. These core-shell particles can be used as precursors to hollow capsules that incorporate weak polyelectrolyte functionality. The role of AA groups in determining the growth profile of these capsules was also examined. The multilayer films prepared may find applications in areas where pH-responsive films are required but large film swelling is unfavorable.     

Identification of Skim Milk Electroacidification Fouling: A Microscopic Approach

The self-assembly film fabricated via the layer-by-layer technique was studied by the dynamic contact angle (DCA) method (wilhelmy plate method). The used polyelectrolytes are poly(diallyl-dimethylammonium chloride) (PDDA), poly(etheleneimine) (PEI), diphenylamine-4-diazonium-formaldehyde resin (DR), 2-nitro-N-methyl-4-diazonium-formaldehyde resin (NDR), and poly(sodium-p-styrenesulfonate) (PSS). For the self-assembly systems of PDDA/PSS, PEI/PSS, DR/PSS, and NDR/PSS, their individual contact angle fluctuates regularly with the fabrication of each layer, while the magnitude of different systems' contact angle depends on the participant polycation. The re-organization of components and the adjacent layer interpenetration are presented here to explain this phenomena. We also found that DR or NDR can adsorb itself via the layer-by-layer method to form multilayer film, and the hydrophobic interaction is put forward to effect this process. Moreover, the procedure of washing and drying after adsorption was studied and considered as a prerequisite for the successful fabrication, especially of the same charge carried components. Copyright 2001 Academic Press.     

Modulation of the functions of osteoblast-like cells on poly(allylamine hydrochloride) and poly(acrylic acid) multilayer films

Deposition of layer-by-layer polyelectrolyte multilayer (PEM) films has been a widely applied surface modification technique to improve the biocompatibility of biomaterials. The objective of this study was to investigate the impact of the deposition of poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) multilayer films on adhesion, growth and differentiation of osteoblasts-like MG63 cells. PAH and PAA were deposited sequentially onto tissue culture polystyrene at either pH 2.0 or pH 6.5 with 4-21 layers. While the MG63 cells attached poorly on the PAH/PAA multilayer films deposited at pH 2.0, while the cells adhered to the PEM films deposited at pH 6.5, depending on layer numbers. Cell adhesion, proliferation and osteogenic activities (alkaline phosphatase activity, expression of osteogenic marker genes and mineralization) were highest on the 4-layer PAH/PAA film and decreased with increasing layer numbers. On the other hand, the behavior of MG63 cells did not show any difference on the adjacent even and odd layers, except PEM4 and PEM5, i.e. the surface charges of the PAH/PAA multilayer films with over ten layers seem indifferent to osteoblastic functions. The results in this study suggested that the mechanical properties of PEM films may play a critical role in modulating the behavior of osteoblasts, providing guidance for application of PEM films to osteopaedic implants.     

双网络增强自支撑多层膜的制备

通过石英晶体微天平(QCM)研究不同最外层对单体、交联剂、引发剂扩散入多层膜的结果显示,聚乙烯亚胺( PEI)为最外层的多层膜更有利于负电荷分子扩散.将(聚乙烯亚胺/聚丙烯酸)12-聚乙烯亚胺[( PEI/PAA)12-PEI]多层膜浸入带有单体、引发剂、交联剂的溶液后,经过光聚合交联与热交联后可形成自支撑膜.XPS数...     

Layer-by-layer-assembled multilayer films of polyelectrolyte-stabilized surfactant micelles for the incorporation of noncharged organic dyes

Noncharged pyrene molecules were incorporated into multilayer films by first loading pyrene into poly(acrylic acid) (PAA)-stabilized cetyltrimethylammonium bromide (CTAB) micelles (noted as PAA&(Py@CTAB)) and then layer-by-layer (LbL) assembled with poly(diallyldimethylammonium chloride) (PDDA). The stable incorporation of pyrene into multilayer films was confirmed by quartz crystal microbalance (QCM) measurements and UV-vis absorption spectroscopy. The resultant PAA&(Py@CTAB)/PDDA multilayer films show an exponential growth behavior because of the increased surface roughness with increasing number of film deposition cycles. The present study will open a general and cost-effective avenue for the incorporation of noncharged species, such as organic molecules, nanoparticles, and so forth, into LbL-assembled multilayer films by using polyelectrolyte-stabilized surfactant micelles as carriers.     

铂纳米颗粒自组装膜的微图像化

从硝基重氮树脂(NDR)与包裹巯基乙酸的铂纳米颗粒(MA-PtNP)的静电自组装,制备了感光性的自组装多层超薄膜.经选择性紫外曝光和十二烷基硫酸钠(SDS)水溶液显影,光照部分的膜,因层与层之间的离子键转变为共价键,不再被SDS水溶液洗脱而留下来;未光照部分的膜,层与层之间仍是离子键,在显影时被除去,从而形成图像.用AFM和SEM对形成的图像进行了表征.     

Facile tailoring of film morphology and release properties using layer-by-layer assembly of thermoresponsive materials

Layer-by-layer self-assembly was used to prepare thermoresponsive thin films of poly(N-isopropylacrylamide) (PNIPAAm) and poly(acrylic acid) (PAA) based on hydrogen bonding. The temperature of PNIPAAm adsorption was shown to significantly affect both the mass proportion of PNIPAAm in the film and the film surface morphology. When the adsorption was conducted at temperatures close to the lower critical solubility temperature of PNIPAAm, the amount of PNIPAAm in the film increased significantly (from 51 to 59%), and the total film mass increased by 30-40%. The films prepared at 30 degrees C also exhibited a lower surface roughness (1-2 nm) compared with 5-8 nm when prepared at 10 or 21 degrees C. The resulting multilayer films ([PAA/PNIPAAm]10) were capable of being reversibly loaded and unloaded with dye (Rhodamine B) by exposure to solutions at elevated temperatures. The rate of loading and release was shown to depend on both the solution temperature and film preparation temperature, leading to tunable loading/release properties.     

pH-Induced antireflection coatings derived from hydrogen-bonding-directed multilayer films

Hydrogen-bonding-directed layer-by-layer assembled films, based on polystyrene-block-poly(acrylic acid) (PS-b-PAA) block copolymer micelles and poly(4-vinylpyridine) (P4VP), were successfully fabricated in methanol. Varying the PAA content in the PS-b-PAA micelles afforded control over the film growth properties, especially the multilayer film thickness. Interestingly, antireflection films with refractive indices that could be tuned between 1.58 and 1.28 were obtained by treatment with an aqueous HCl solution (pH 2.27), and the transmittance obtained was as high as 98.4%. In acid solution, the pyridine group was protonated, destroying the hydrogen bonding between P4VP and PAA. A concomitant pH-induced polymer reorganization in the multilayers resulted in a porous honeycomb-like texture on the substrate.     

动态多孔海绵结构多层膜负载溶菌酶用于抗菌涂层的研究

以聚丙烯酸(PAA)和聚乙烯亚胺(PEI)为构筑单元,运用层层自组装技术制备了聚电解质多层膜.该多层膜具有独特的动态特点——经酸处理后膜内部形成海绵状通孔结构,该海绵结构在饱和水蒸气的处理下,多孔结构能够闭合,重新回到致密的膜结构.借助该种动态多层膜平台,能够简单有效地通过毛细作用力将溶菌酶负载并固定于多层膜中,为制备基于抗菌蛋白的抗菌涂层提供了新的方法.扫描电镜表征了多层膜动态变化过程,激光共聚焦显微镜表征了溶菌酶在膜内的分布情况,并测定了溶菌酶载入量及其释放动力学.进一步的抗菌测试表明该种抗菌涂层在溶菌酶和PEI的共同作用下可以有效地抑制金黄色葡萄球菌.将多层膜同时负载溶菌酶和乳铁蛋白,提升了涂层对大肠杆菌的杀菌效果.     

Mechanically stable antireflection and antifogging coatings fabricated by the layer-by-layer deposition process and postcalcination

Complexes of poly(diallyldimethylammonium chloride) (PDDA) and sodium silicate (PDDA-silicate) are alternately deposited with poly(acrylic acid) (PAA) to fabricate PAA/PDDA-silicate multilayer films. The removal of the organic components in the PAA/PDDA-silicate mulilayer films through calcination produces highly porous silica coatings with excellent mechanical stability and good adhesion to substrates. Quartz substrates covered with such porous silica coatings exhibit both antireflection and antifogging properties because of the reduced refractive index and superhydrophilicity of the resultant films. A maximum transmittance of 99.86% in the visible spectral range is achieved for the calcinated PAA/PDDA-silicate films deposited on quartz substrates. The wavelengths of maximum transmittance could be well tailored by simply changing the deposition cycles of multilayer films. The usage of PDDA-silicate complexes allows for the introduction of high porosity to the resultant silica coatings, which favors the fabrication of antireflection and antifogging coatings with enhanced performance. Meanwhile, PDDA-silicate complexes enable rapid fabrication of thick porous silica coatings after calcination because of the large dimensions of the complexes in solution. The easy availability of the materials and simplicity of this method for film fabrication might make the mechanically stable multifunctional antireflection and antifogging coatings potentially useful in a variety of applications.     

Multilayer film assembled from charged derivatives of chitosan: physical characteristics and biological responses

Polyelectrolyte multilayer films were successfully assembled from each of the three charged derivatives of chitosan; N-[(2-hydroxyl-3-trimethylammonium)propyl]chitosan chloride (HTACC), N-succinyl chitosan (SCC) and N-sulfofurfuryl chitosan (SFC), paired with one of the two oppositely charged polyelectrolytes, poly(acrylic acid) (PAA) and poly(allylamine hydrochloride) (PAH) on surface-treated poly(ethylene terephthalate) (treated PET) substrates by alternate layer-by-layer adsorption. Surface coverage and wettability of the multilayer films were determined by AFM and water contact angle measurements, respectively. Analysis by quartz crystal balance with dissipation (QCM-D) has suggested that all multilayer films are relatively rigid and have a high water content associated within their structures, accounting for up to 85-90% (w/w) for films having 7-10 layers. In vitro cytocompatibility tests for the fibroblast-like L929 cell line revealed a slight dependency for cell adhesion and proliferation on the outermost layer. The multilayer film containing HTACC exhibited moderate antibacterial activity against E. coli and S. aureus. Bearing negative charges, the multilayer films terminating with SFC and having at least 10 layers were capable of suppressing the adsorption of plasma proteins and platelet adhesion at a comparable level to the multilayer film assembled from heparin, a well-known antithrombogenic polymer.