Effects of Surface Properties on Rheological and Interfacial Properties of Pickering Emulsions Prepared by Fumed Silica Suspensions Pre-Adsorbed Poly(N-Isopropylacrylamide)

The hydrophobic fumed silica suspensions physically pre-adsorbed poly(N-isopropylacrylamide) (PNIPAM) in water could prepare oil dispersed in water (O/W) Pickering emulsion by mixing of silicone oil. The resulting Pickering emulsions were characterized by the measurements of volume factions of emulsified silicone oil, adsorbed amounts of the silica suspensions, oil droplet size, and some rheological responses, such as stress-strain sweep curve and dynamic viscoelastic moduli as a function of the added amount of PNIPAM. Moreover, their characteristics were compared with those of the O/W Pickering emulsions prepared by the hydrophilic fumed silica suspensions pre-adsorbed PNIPAM. For the emulsions prepared by the hydrophobic silica suspensions, an increase in the added amount of PNIPAM led to (1) a decrease in the volume fraction of the emulsified oil in the emulsified phase, (2) both the size of oil droplets and the adsorbed amount of the corresponding silica suspensions being almost constant, except for the higher added amounts, and (3) both the storage modulus (G′) and the yield shear strain being constant. The term of 1 is the same for the emulsions prepared by the hydrophilic silica suspensions, whereas both the adsorbed amount of the corresponding silica suspension and the G′ value increase and both the droplet size and the yield shear strain decrease with an increase in the added amount of PNIPAM. The differences between the rheological properties of the emulsions prepared by the hydrophilic silica suspensions and those by the hydrophobic ones are attributed to the hydrophobic interactions of the flocculated silica particles in the Pickering emulsions.     

Preparation characteristics of water-in-oil-in-water multiple emulsions using microchannel emulsification

Microchannel (MC) emulsification is a novel technique for preparing monodispersed emulsions. This study demonstrates preparing water-in-oil-in-water (W/O/W) emulsions using MC emulsification. The W/O/W emulsions were prepared by a two-step emulsification process employing MC emulsification as the second step. We investigated the behavior of internal water droplets penetrating the MCs. Using decane, ethyl oleate, and medium-chain triglyceride (MCT) as oil phases, we observed successful MC emulsification and prepared monodispersed oil droplets that contained small water droplets. MC emulsification was possible using triolein as the oil phase, but polydispersed oil droplets were formed from some of the channels. No leakage of the internal water phase was observed during the MC emulsification process. The internal water droplets penetrated the MC without disruption, even though the internal water droplets were larger than the resulting W/O/W emulsion droplets. The W/O/W emulsion entrapment yield was measured fluorometrically and found to be 91%. The mild action of droplet formation based on spontaneous transformation led to a high entrapment yield during MC emulsification.     

Several surfaces with special wettability: Influence on spreading and motion of W/O emulsion droplets

Physical and chemical modifications were made on the surface of the aluminum sheet to change the surface properties and superhydrophobic–hydrophilic wettability gradient surface was made on the perspex surface by using microstructure-pattering technique and self-assembled-monolayer method. By using high-speed video camera system and optical tensiometer, this paper discusses the influence of special surfaces with different wettability on spreading and motion of water, oil, and W/O emulsion droplets both experimentally and theoretically. In addition, the paper also discusses the influence of the superhydrophobic–hydrophilic wettability gradient on fluidity of W/O emulsion droplets and the coalescence process of droplets. The results showed that the contact angle of W/O emulsion droplets on the modified surfaces was related to the water and oil distribution at the three-phase line. On the wettability gradient surface, the droplet moved spontaneously when the droplet was located at the junction of the gradient. A quasi-steady theoretical model was used to analyze the driving and resistant forces acting on a droplet to improve the understanding of the self-transport behavior of the droplets.     

Demulsification of water-in-oil emulsions by permeation through Shirasu-porous-glass (SPG) membranes

To investigate the effect of the droplet/pore size ratio on membrane demulsification, water-in-oil (W/O) emulsions with uniform-sized droplets was demulsified by permeation through Shirasu-porous-glass (SPG) membranes with a narrow pore size distribution at mean droplet/pore diameter ratios of 0.52–5.75. At transmembrane pressures above a critical pressure, the water droplets larger than the membrane pore size were demulsified, where the SPG membrane acted as a coalescer because the hydrophilic membrane surface had a high affinity for the water droplets. By contrast, at transmembrane pressures below the critical pressure, the larger water droplets were all retained by the membrane due to the sieving effect of the uniform-sized pores. When a W/O emulsion with a mean droplet diameter of 2.30 μm was allowed to permeate through a membrane with a mean pore diameter of 0.86 μm, the demulsification efficiency increased with increasing transmembrane pressure, to a maximum value of 91% at a transmembrane pressure of 392 kPa, and then decreased, while the transmembrane flux increased almost linearly with increasing transmembrane pressure. The demulsification efficiency was higher for higher water phase content and lower concentration of the surfactant, tetraglycerin condensed ricinoleic acid ester, in the emulsions due to the reduction of the emulsion stability.     

Mechanism of oil-in-water emulsification using a water-soluble amphiphilic polymer and lipophilic surfactant

A new O/W (oil-in-water) emulsification system was developed using the amphiphilic polymer HHM-HEC (hydrophobically-hydrophilically modified hydroxyethylcellulose) and a lipophilic surfactant. HHM-HEC was used as a thickener and polymeric surfactant, and the addition of small quantities of various types of nonionic lipophilic surfactant (hydrophilic-lipophilic balance <5) decreased the droplet size of several types of oil due to a lowering of the tension at the water/oil interface. The oil droplets were held by the strong network structure of the aqueous HHM-HEC solution, preserving the O/W phase without inversion. These stable O/W emulsions were prepared without the addition of hydrophilic surfactants and thus show improved water repellency.     

Water-in-carbon dioxide emulsions stabilized with hydrophobic silica particles

W/C emulsions were stabilized using hydrophobic silica particles adsorbed at the interface, resulting in average droplet diameters as low as 7.5 microm. A porous cross-linked shell was formed about a hydrophilic (colloidal and fumed) silica core with a trifunctional silylating agent, (heptadecafluoro-1,1,2,2-tetrahydrodecyl)triethyoxysilane, to render the particles CO(2)-philic. The stability of emulsions comprising equal weights of CO(2) and water was assessed with visual observations of settling fronts and the degree of emulsion coalescence, and the average drop size was measured by optical microscopy. The effect of CO(2) density on both emulsion stability and droplet size was determined quantitatively. The major destabilizing mechanism of the emulsions was settling, whereas Ostwald ripening and coalescence were not visible at any density, even over 7 days. Flocculation of the settling droplets did not occur, although gelation of the emulsions through particle interactions resulted after longer periods of time. CO(2)-philic particles offer a new route to highly stable W/C emulsions, with particle energies of attachment on the order of 10(6)kT, even at CO(2) densities as low as 0.78 g ml(-1). At these low densities, surfactants rarely stabilize emulsions as the result of poor surfactant tail solvation.     

Differential scanning calorimetry (DSC) in multiple W/O/W emulsions

Multiple water-in-oil-in-water (W/O/W) emulsions offer a huge potential as encapsulation systems in different food, cosmetic, and pharmaceutical applications. Because of their complex structure, however, it is difficult to characterize these systems. Typical measurement techniques to determine the size and stability of the inner water droplets encapsulated in the oil droplets show limitations and inaccuracies. Determining the total amount of water in the inner droplets is most often done by indirect methods to date. We describe an analytical method based on differential scanning calorimetry (DSC) for characterizing the total amount of encapsulated water droplets and their stability in W/O/W multiple emulsions. It uses the possibility to directly determine the latent heat of freezing of water droplets of the same size and composition as in the multiple emulsions. The amount of water in the inner droplets of a W/O/W emulsion can thus be calculated very accurately. It is shown that this method enables furthermore detecting multi-modalities in the size distribution of inner water droplets in W/O/W emulsions. Changes in droplet size distribution of the inner droplets occurring during the second emulsification step of processing or during storage can be detected. DSC thus offers a powerful tool to characterize the structure of multiple W/O/W emulsions.     

Stabilization of Water‐Soluble Antioxidant in Water‐in‐Oil‐in‐Water Double Emulsions

Abstract

In this study, we are introducing a method that can effectively stabilize antioxidants in water‐in‐oil‐in‐water (W/O/W) double emulsions. Preliminarily, stable W/O/W double emulsions were produced by manipulating the characteristics of internal aqueous phase via two‐stage emulsification, resulting consequently in the formation of fine internal water droplets in the dispersed oil droplets. From conductivity measurements that can determine the elution amount of internal aqueous phase, it was confirmed that the double emulsion stability could be improved by treating the internal aqueous phase with a hydroxypropyl‐beta‐cyclodextrin. In this study, kojic acid, 5‐hydroxy‐2‐(hydroxymethyl)‐4‐pyrone was selected as a model antioxidant. The stabilization of kojic acid was attempted by locating it in the internal water droplets of the stable W/O/W double emulsions. The stability of kojic acid in the double emulsion system could be maintained at 90% for 10 weeks at high temperature. We believe that these stable W/O/W double emulsions could be used meaningfully as a carrier for many unstable antioxidants.     

Dielectric behavior of double emulsions with "core-shell droplet" morphology

The dielectric behavior of double emulsions with "core-shell droplet" morphology is investigated over a broad range of frequency. A new modified Pauly-Schwan model is proposed for the complex permittivity of double emulsions. The proposed model takes into consideration the morphology and packing limit of droplets. The dielectric behaviors of oil-in-water-in-oil (O/W/O) and water-in-oil-in-water (W/O/W) types of double emulsions, as predicted by the proposed model, are discussed.     

On the escape process during phase inversion of an emulsion

This paper deals with a phenomenon which plays an important role in the phase inversion process of emulsions. This process is governed by the interplay of coalescence of droplets, often leading to double emulsions, and the escape of those internal droplets. The latter process retards the inversion process. Coalescence has been the subject of many studies, contrary to the escape event. This paper addresses the escape process both theoretically and experimentally. The model developed analyses the rate of the escape of internal droplets from the mother droplet via a coalescence process, where the internal flow, as generated by the external flow, generates the viscous force for coalescence. Incomplete mixing in the droplet has been assumed. Experimental data on the escape rate of oil droplets from O/W/O emulsions have been analysed using a Computational Fluid Dynamics approach, where the model as indicated above has been incorporated. Experimental data and simulations compare very well. Data have been compared on varying the size of the inner droplets and the rotational speed of the vessel where the double emulsion has been formed and where the escape took place.     

Multiple emulsion stability: pressure balance and interfacial film strength

The objective of this study was to investigate the significance of inner and outer phase pressure, as well as interfacial film strength on W/O/W multiple emulsion stability using microscopy and long-term stability tests. It was observed that immediately upon applying a coverslip to samples the multiple droplets deformed and there was coalescence of the inner aqueous droplets. Under certain conditions (such as lipophilic surfactant concentration and internal phase osmotic pressure) the destabilized multiple emulsions formed unique metastable structures that had a "dimpled" appearance. The formation of these metastable structures correlated with the real-time instability of the W/O/W multiple emulsions investigated. Multiple emulsion stability also correlated with the interfacial film strength (measured by interfacial elasticity) of the hydrophobic surfactant at the mineral oil/external continuous aqueous phase interface. The formation of the metastable dimpled structures and the long-term stability of the multiple emulsions were dependent on the osmotic pressure of the inner droplets and the Laplace curvature pressure as described by the Walstra Equation (P. Walstra, "Encyclopedia of Emulsion Technology" (P. Becher, Ed.), Vol. 4. Dekker, New York, 1996). It appears that the effect of coverslip pressure on multiple emulsions may be useful as an accelerated stability testing method or for initial formulation screening.     

Interface composition of multiple emulsions: rheology as a probe

We have investigated the dynamic rheological properties of concentrated multiple emulsions to characterize their amphiphile composition at interfaces. Multiple emulsions (W1/O/W2) consist of water droplets (W1) dispersed into oil globules (O), which are redispersed in an external aqueous phase (W2). A small-molecule surfactant and an amphiphilic polymer were used to stabilize the inverse emulsion (W1 in oil globules) and the inverse emulsion (oil globules in W2), respectively. Rheological and interfacial tension measurements show that the polymeric surfactant adsorbed at the globule interface does not migrate to the droplet interfaces through the oil phase. This explains, at least partly, the stability improvement of multiple emulsions as polymeric surfactants are used instead of small-molecule surfactants.     

Effects of compositions on the stability of polyols-in-oil-in-water (P/O/W) multiple emulsions

Polyols-in-oil-in-water (P/O/W) multiple emulsions were successfully prepared by using polyols as inner aqueous phase to avoid instabilities caused by water. The influence of polyols, oils and emulsifiers on the morphology and stability of P/O/W multiple emulsions were studied and the stability mechanisms of this new kind of multiple emulsions were also explored. Glycerol that has the worst solubility in oil phase contributed to the formation of stable inner droplets which agree with the Ostwald Ripening theory. Mineral oil worked well with the system proving that oils possessing similar solubility parameters with the hydrophobic group of emulsifiers benefited for system stability. Several typical surfactants had been investigated in this article, and it turned out that emulsifiers Cetyl PEG/PPG-10/1 Dimethicone and the block copolymer Poloxamer 407 were suitable for the P/O/W system. The stability of the system affected by different compositions was evaluated based on microscopic observation and rheological measurements. The novel multiple emulsions will provide enlightening recommendations for future investigations and applications in cosmetic, food and pharmaceuticals, including drug delivery and the encapsulation of hydrophilic actives and actives that are soluble in polyols.     

Mixed O/W emulsions stabilized by solid particles: A model system for controlled mass transfer triggered by surfactant addition

This article deals with a model mixed oil-in-water (O/W) emulsion system developed to study the effect of surfactants on mass transfer between dispersed oil droplets of different composition. In this purpose, our goal was to formulate O/W emulsions without any surface active agents as stabilizer, which was achieved by replacing surfactants by a mixture of hydrophilic/hydrophobic silica particles. Then, to study the specific role of surfactants in the oil transfer process, different types and concentrations of surfactants were added to the mixed emulsion after its preparation. In such a way, the same original emulsion can be used for all experiments and the influence of various surface active molecules on the oil transfer mechanism can be directly studied. The model mixed emulsion used consists of a mixture of hexadecane-in-water and tetradecane-in-water emulsions. The transfer between tetradecane and hexadecane droplets was monitored by using differential scanning calorimetry, which allows the detection of freezing and melting signals characteristic of the composition of the dispersed oil droplets. The results obtained showed that it is possible to trigger the transfer of tetradecane towards hexadecane droplets by adding surfactants at concentrations above their critical micellar concentration, measured in presence of solid particles, through micellar transport mechanism.     

Induction of instability in water-in-oil-in-water double emulsions by freeze-thaw cycling

Individual water-in-oil-in-water (W1/O/W2) double-emulsion globules loaded with fluorescently labeled bovine serum albumin (FITC-BSA) were optically monitored within cylindrical capillaries during freeze-thaw cycling. Coalescence of internal aqueous droplets (W1) and external aqueous phase (W2), termed external coalescence, was not observed before or during freezing of the oil phase (O). On the other hand, this instability mechanism was readily promoted during thawing. This realization confirms the previously suggested potential of W1/O/W2 double emulsions to trigger release upon oil thawing and demonstrates that it is a direct result of globule breakage through external coalescence. The presented results also identified a threshold in the relative W1 droplet size above which instability occurred, while smaller droplets remained unperturbed and therefore indicate that optimization of the delivery can be achieved by tuning the size of W1 droplets. In addition, we propose a possible explanation for the occurrence of instability during oil thawing and its dependence on the size of W1 droplets. Because this alternative globule-breakage mechanism simply uses temperature increase (solid-to-liquid-phase transition) as external stimulus, W1/O/W2 double-emulsion delivery systems can be easily tailored by choosing an oil phase with the appropriate phase-transition temperature.     

Effect of cetyltrimethylammonium bromide addition on the emulsions stabilized by montmorillonite

The wettability of montmorillonite could be in situ modified by cationic surfactant cetyltrimethylammonium bromide (CTAB). The type and stability of emulsions prepared from montmorillonite with different concentrations of cationic surfactant were investigated, and a double phase inversion of emulsions was observed. The adsorption of CTAB on montmorillonite particles was studied by surface tension and zeta potential measurements, and the variation of the wettability of particles with the concentration of CTAB was characterized by the contact angle measurements. The adsorption of particles at the surface of emulsion droplets was observed by laser-induced confocal scanning microscopy. At low surfactant concentrations, the adsorption of CTAB on montmorillonite increased the hydrophobicity of the particles, and the stability of oil-in-water emulsions was enhanced. With the increase of the CTAB concentration, montmorillonite particles changed from hydrophilic to hydrophobic, and water-in-oil emulsions were obtained. However, at higher surfactant concentrations, the emulsions inverts to O/W again because montmorillonite particles were reconverted into hydrophilic due to the formation of CTAB bilayer on the surface of montmorillonite.     

One-step formation of w/o/w multiple emulsions stabilized by single amphiphilic block copolymers

Multiple emulsions are complex polydispersed systems in which both oil-in-water (O/W) and water-in-oil (W/O) emulsion exists simultaneously. They are often prepared accroding to a two-step process and commonly stabilized using a combination of hydrophilic and hydrophobic surfactants. Recently, some reports have shown that multiple emulsions can also be produced through one-step method with simultaneous occurrence of catastrophic and transitional phase inversions. However, these reported multiple emulsions need surfactant blends and are usually described as transitory or temporary systems. Herein, we report a one-step phase inversion process to produce water-in-oil-in-water (W/O/W) multiple emulsions stabilized solely by a synthetic diblock copolymer. Unlike the use of small molecule surfactant combinations, block copolymer stabilized multiple emulsions are remarkably stable and show the ability to separately encapsulate both polar and nonpolar cargos. The importance of the conformation of the copolymer surfactant at the interfaces with regards to the stability of the multiple emulsions using the one-step method is discussed.     

Spontaneous size selection in cholesteric and nematic emulsions

We study the spontaneous size selection in lyotropic cholesteric (W/O) and thermotropic nematic (O/W) liquid crystal emulsions. The droplet sizes have been characterized by dynamic light scattering, which indicates a narrow monomodal distribution of droplets achieved spontaneously even without emulsion filtration. Anchoring of the director, provided by the chosen surfactant on the interface, may generate a topological defect inside the droplet. Below the critical radius R = K/W, determined by the ratio of Frank elastic and the surface anchoring constants, the effective anchoring strength is weak and droplets are not topologically charged; this allows them to coalesce freely, depleting the size distribution in this range. Large droplets possess a topological charge of +1 and present a high elastic energy barrier for pair coalescence; the resulting size distribution is skewed, with R > R, and effectively frozen.     

Performance study on particle size variables for nano multiple emulsions

Multiple emulsions are of growing interest as potential delivery vehicles for active constituents. The objective of this study was to encapsulate a water-soluble substance as a functional ingredient in the water-in-oil-in-water (W/O/W) multiple emulsions with nano droplets, and the resultant characterizations have been determined. Emulsions have been generated using ultrasonic with different time, the prepared multiple emulsions have been characterized with microscopic analysis, differential scanning calorimetry, encapsulation efficiency, and rheology. Moreover, droplet size and conductivity analysis have been determined to measure stability. Results showed that multiple structures exist after ultrasonic. Furthermore, these nano multiple emulsions presented encapsulation efficiencies up to 60%, while oil droplets size was 320 nm. Rheology analysis showed dissimilar features of distinct particle size, while droplet size and conductivity analysis indicated a similar trend with the passage time. As a conclusion of this study, the results were encouraging towards development of a nano multiple emulsion encapsulate water-soluble active ingredient for cosmetics.     

Multiple phase inversion of emulsions stabilized by in situ surface activation of CaCO3 nanoparticles via adsorption of fatty acids

The in situ surface activation of raw CaCO(3) nanoparticles by interaction with a series of sodium carboxylates of chain length between 6 and 12 as well as sodium 2-ethylhexylsulfosuccinate (AOT) was studied, and the impact of this on the stabilization and phase inversion of toluene-water emulsions was assessed. By using complementary experiments including measurement of particle zeta potentials, adsorption isotherms of amphiphile, and relevant contact angles, the mechanism of this activation was revealed. The results show that hydrophilic CaCO(3) nanoparticles can be surface activated by interaction with sodium carboxylates and AOT even if they are not surface-active themselves. Both the electrostatic interaction between the positive charges on particle surfaces and the negative charges of anionic amphiphile headgroups and the chain-chain interactions of the amphiphile result in monolayer adsorption of the amphiphile at the particle-water interface. This transforms the particles from hydrophilic to partially hydrophobic such that they become surface-active and stabilize oil-in-water O/W(1) emulsions and induce O/W(1) → water-in-oil W/O phase inversion, depending on the chain length of the carboxylate molecules. At high amphiphile concentration, bilayer or hemimicelle adsorption may occur at the particle-water surface, rendering particles hydrophilic again and causing their desorption from the oil-water interface. A second phase inversion, W/O → O/W(2), may occur depending on the surface activity of the amphiphile. CaCO(3) nanoparticles can therefore be made good stabilizers of both O/W and W/O emulsions once surface activated by mixing with traces of suitable anionic amphiphile.