Multipacting simulation and analysis of a taper quarter wave cavity by using Analyst-PT3P

Since the tapered quarter wave resonator (QWR) cavity is proven to have a much lower peak surface magnetic field in the short plate and a lower peak surface electric field near the beam tube compared with the straight outer conductor QWR, it has been recommended for the separated sector cyclotron linac injector system in the heavy ion research facility in Lanzhou. This paper is focused on the multipacting (MP) analysis for the tapered QWR with a frequency of 80.5 MHz and beta of 0.085. Using the Analyst program, MP bands can be simulated and analyzed with the Particle Tracking module to identify potential problems in the cavity design. This paper will present the simulation results of MP for the tapered QWR cavity.     

325 MHz spoke腔的二次电子倍增效应

采用CST软件的粒子工作室模块, 对spoke超导腔中可能发生的二次电子倍增效应进行了分析研究,并采用二次电子倍增效应发生后形成稳定状态时的粒子数增长率来表征其强度。模拟计算表明：该腔存在两处二次电子倍增效应,spoke柱两端的两点一阶倍增; spoke腔两端侧壁与中心圆筒交界处的单点一阶倍增;二次电子倍增在加速腔压为0.65 MV时的增长率最高,而腔压大于1 MV时,增长率均为负,即无倍增发生。     

Multipacting analysis in micro-pulse electron gun

Modeling multipacting to steady state saturation is of interest in determining the performance of the micro-pulse electron gun. In this paper, a novel method is proposed to calculate the multipacting resonance param- eters for the gun. This method works well, and the 2-D simulation results suggest that steady state saturation can be achieved in the gun. After saturation the transition from two-surface multipacting to single-surface multipacting occurred, and an extensive range of electron emission time is a suggested way to avoid this kind of transition.     

Multipacting analysis for half wave resonators in the China ADS

In the China ADS(CIADS) proton accelerator, multipacting is an issue of concern for the superconducting cavities. The parallel codes Omega3 P and Track3 P, developed at SLAC under the support of the DOE Sci DAC program, have been used to calculate the electromagnetic field distribution and to analyze the multipacting barriers of such cavities. In this paper, two types of 162.5 MHz half wave resonator cavities, HWR-010(cylinder type with β of 0.10) and HWR-015(taper type with β of 0.15) have been analyzed, and the results of the multipacting analyses show that the resonant electrons occur at different regions with different accelerating gradients. The two-point 1st order multipacting on the short plate has also been researched and discussed.     

Study of multipacting effect in superconducting cavity

A number of superconducting cavities of axis-symmetric geometry have been considered to study the effect in order to achieve the desired performance.It is shown that the multipacting effect is strongly dependent on the condition of the RF surface and can be suppressed with reconsideration of the geometry.The simulation result is compared with the result of the semi-analytical model in the end.     

Study of multipacting effect in superconducting cavity

A number of superconducting cavities of axis-symmetric geometry have been considered to study the effect in order to achieve the desired performance. It is shown that the multipacting effect is strongly dependent on the condition of the RF surface and can be suppressed with reconsideration of the geometry. The simulation result is compared with the result of the semi-analytical model in the end.     

Study on the 1.3 GHz low loss shape superconducting cavities at IHEP

As part of the international research program on the superconducting cavity for the International Linear Collider (ILC) R&D on the 1.3 GHz low loss superconducting cavities has been carried out at the Institute of High Energy Physics (IHEP) since 2005. A design of 1.3 GHz low loss cavity shape was proposed and six single-cell cavities of different niobium material were successfully fabricated with standard technology. In this study our priority was on large grain (LG) cavities. The two LG cavities were treated with complete procedures of surface treatments based on chemical polishing (CP) without electro polishing (EP) at IHEP. The two LG cavities and a fine grain cavity were sent to KEK for vertical testing. All the three cavities reached accelerating gradients higher than 35 MV/m and the maximum gradient of 40.27 MV/m was achieved in the LG cavity. This paper presents the process of the vertical RF tests and the comparison of the LG and fine grain cavities's performance.     

Study on the 1.3 GHz low loss shape superconducting cavities at IHEP

As part of the international research program on the superconducting cavity for the International Linear Collider (ILC) R&;D on the 1.3 GHz low loss superconducting cavities has been carried out at the Institute of High Energy Physics (IHEP) since 2005. A design of 1.3 GHz low loss cavity shape was proposed and six single-cell cavities of different niobium material were successfully fabricated with standard technology. In this study our priority was on large grain (LG) cavities. The two LG cavities were treated with complete procedures of surface treatments based on chemical polishing (CP) without electro polishing (EP) at IHEP. The two LG cavities and a fine grain cavity were sent to KEK for vertical testing. All the three cavities reached accelerating gradients higher than 35 MV/m and the maximum gradient of 40.27 MV/m was achieved in the LG cavity. This paper presents the process of the vertical RF tests and the comparison of the LG and fine grain cavities's performance.     

2-cell超导腔的高阶模分析

 阐述了2-cell Telsa腔的设计。用3维程序HFSS分析了其高阶模的特点，给出了高阶模的主要参数频率、品质因数、分路阻抗以及模式的电场分布，并且π模的电场分布与Superfish的模拟结果相比较，两者是一致的。最后，简要分析了各高阶模对电子加速的影响，分析表明高阶模降低了电子加速效率和束流的稳定性。     

A vertical test system for China-ADS project injector II superconducting cavities

To test superconducting cavities, a vertical test system has been designed and set up at the Institute of Modern Physics （IMP）. The system design is based on VCO-PLL hardware and the NI Labview software. The test of the HWR010#2 superconducting cavity shows that the function of this test system is satisfactory for testing the low frequency cavity.     

Nonlinear piezoelectricity in epitaxial ferroelectrics at high electric fields

Nonlinear effects in the coupling of polarization with elastic strain have been predicted to occur in ferroelectric materials subjected to high electric fields. Such predictions are tested here for a PbZr0.2Ti0.8O3 ferroelectric thin film at electric fields in the range of several hundred MV/m and strains reaching up to 2.7%. The piezoelectric strain exceeds predictions based on constant piezoelectric coefficients at electric fields from approximately 200 to 400 MV/m, which is consistent with a nonlinear effect predicted to occur at corresponding piezoelectric distortions.     

场致发射与二次电子倍增效应的程序开发

与瑞士保罗希尔研究所合作,在双方合作开发的通用加速器模拟程序库OPAL中添加了3维复杂几何处理模块及场致发射与二次电子发射模块,使得OPAL具备了进行3维复杂结构中场致发射与二次电子倍增效应模拟的能力,可用于优化复杂高频/微波器件的结构设计从而抑制暗电流发射或二次电子倍增效应。     

高场作用下有机双层器件的场致复合发光

以在高场作用下载流子对三角势垒的Fowler Nordheim隧穿理论为基础 ,建立了双层有机电致发光器件载流子的输运与复合发光模型。求出了稳态下电荷载流子的复合发光与电压和界面势垒的函数关系式 ,计算并讨论了所加电压和阳极区与阴极区厚度之比 (Lh/Le)对复合发光的影响。该理论模型很好地解释了电场对复合区域的调制作用。     

Screening effects on polar mode scattering at high electric fields

The effects of screening of polar optical mode of scattering at high electric fields are studied by performing Monte Carlo calculations on InSb at 77 K. The average carrier energy is found to be markedly affected by the inclusion of screening.     

Improvements of performance on sputter-coated niobium films for superconducting cavities by adding a NbN interlayer

A new type of superconducting film is studied at Peking University in order to improve the properties of sputter-coated films for superconducting cavities. NbN film and NbN–Nb film have been prepared by DC diode sputtering technology at certain nitrogen content and temperature. NbN film is prepared between copper and Nb film as a barrier against copper diffusion into Nb. Micro-structure analyses show that the NbN–Nb films grow well on the copper substrate. The T_c of the Cu–NbN–Nb increases to 9.5 K compared to the 9.2 K transition temperature of bulk Nb.     

场致发射与二次电子倍增效应的程序开发

与瑞士保罗希尔研究所合作,在双方合作开发的通用加速器模拟程序库OPAL中添加了3维复杂几何处理模块及场致发射与二次电子发射模块,使得OPAL具备了进行3维复杂结构中场致发射与二次电子倍增效应模拟的能力,可用于优化复杂高频/微波器件的结构设计从而抑制暗电流发射或二次电子倍增效应。     

Dissociation of bipolaron in non-degenerate polymer chain at high electric fields

We investigate the dynamics of bipolaron in non-degenerate polymer (e.g. PPV) in an external electric field by using a nonadiabatic evolution method, which allows transition between instantaneous electronic states. When the applied electric field exceeds a critical value, a bipolaron is found to dissociate like the case of polaron due to the lattice distortion not being able to follow the fast moving electrons. The critical value is estimated to be of order ¹⁰⁶ V/cm${10}^6\text{ V}/\text{cm}$. This result is consistent with experiment in that a large increase in current in PPV occurs at high fields. At a given electric field, the saturation velocity of bipolaron will decrease with the increase of non-degenerate parameters te$t_e$.     

Resistive transitions of superconducting thin films in strong electric fields

We report discontinuous current-induced transitions to the normal state of superconducting thin films in the mixed state. The results obtained are in qualitative agreement with the recent theory of Thompson and Hu of dynamic instabilities of vortices.