On a mathematical model for hot carrier injection in semiconductors

We study a collisionless transport model for electrons in a semiconductor, and we perform an asymptotic analysis for low temperatures or large applied biases. We derive analytic relations for the built-in potential and for the current which flows through the structure.     

A precise mathematical model for geometric modeling of wire rope strands structure

Based on the Frenet frame, this paper proposes a general mathematical spiral model with an arbitrary smooth space curve as the center path, which can accurately build complex skeleton lines of wire rope strands. From the aspect of geometry, all the wires are spatial cylinders and must meet the actual geometric requirements: 1. The center cylinder is tangent or separated from the spiral cylinder; 2. The adjacent spiral cylinders do not overlap each other. For requirement 1, Costello’ conclusion is referenced and extended universally to suit an arbitrary smooth space central curve case with rigorous proofs. For requirement 2, the overlapping problem is described as obtaining the minimum distance between the two adjacent spatial path curves, which is deduced by a novel cross section method (SCM) with rigorous proofs and solved by the General Particle Swarm Optimization (PSO) algorithm. Based on the above models, the geometric modeling of wire rope strands procedure is proposed and implemented on the platforms of MATLAB and SolidWorks. Validations are conducted through geometric graphical representations, compared with those from some previous researches. For the simple straight strand case, when the number of spiral cylinders and spiral radius are given, the critical relationship between the ratio of spiral wire radius to spiral radius and the spiral angle is firstly obtained, which can be a precise dimension design reference of simple straight strand for eliminating initial geometric overlap. Further, to show the advance, some precise graphical examples of complex wire rope strands like independent wire rope core (IWRC) and multilayered rope are presented. The wire rope strands geometric modeling method proposed in this paper is precise enough averting initial geometric overlap between the wires for the benefit of subsequent mechanical computation accuracy and efficiency.     

A mathematical model for induction hardening including mechanical effects

We investigate a mathematical model for induction hardening of steel. It accounts for electromagnetic effects that lead to the heating of the workpiece as well as thermomechanical effects that cause the hardening of the workpiece. The new contribution of this paper is that we put a special emphasis on the thermomechanical effects caused by the phase transitions. We take care of effects like transformation strain and transformation plasticity induced by the phase transitions and allow for physical parameters depending on the respective phase volume fractions.The coupling between the electromagnetic and the thermomechanical part of the model is given through the temperature-dependent electric conductivity on the one hand and through the Joule heating term on the other hand, which appears in the energy balance and leads to the rise in temperature. Owing to the quadratic Joule heat term and a quadratic mechanical dissipation term in the energy balance, we obtain a parabolic equation with L¹ data. We prove existence of a weak solution to the complete system using a truncation argument.     

A mathematical model and two-stage heuristic for hot rolling scheduling in compact strip production

This paper addresses a new hot rolling scheduling problem from the compact strip production process, which is the mainstream production technology that is used worldwide for sheet strips. The problem is modeled as a combination of two coupled sub-problems. One sub-problem is a sheet strip assignment problem that assigns sheet strips to rolling turns with the constraints of safe values of different gauge levels, and the other is a sheet strip sequencing problem that decides the rolling sequence for all of the sheet strips in a rolling turn to form a particular parabolic shape in thickness. To solve this hot rolling scheduling problem, we present a novel approach that consists of a sheet strip assignment heuristic and a sheet strip sequencing heuristic. The sheet strip assignment heuristic minimizes the number of virtual sheet strips by generating rolling turns according to the ordered sheet strips with maximum gauge level and their safe values. The sheet strip sequencing heuristic minimizes the average change of the thickness of adjacent sheet strips by arranging a certain number of duplicate sheet strips to the increasing stage of a rolling turn. Extensive experiments based on both synthetic and real-world instances from a compact strip production process show the effectiveness of the proposed two-stage heuristic in solving the hot rolling scheduling problem.     

A coupled mathematical model for the rollgap and interstand regions in a hot strip mill

In this paper we consider the process of hot-rolling steel strip.The thickness is reduced by passing the strip through a sequenceof rollers with reductions varying from 40% at the first rollpair to about 10% at the last pair. Between the roll pairs,the strip deflection curve is controlled by a looper roll. Amathematical model of the coupled roll gap and interstand regionis required to assist in the initial setup so as to spread theloads and torques evenly through the roll stands. The modelis of potential value in monitoring the transient behaviourof the rolling process. A review of the various models for eachregion and a coupled complete rolling model is described.     

A mathematical model for unemployment

In this paper we have proposed and analyzed a non-linear mathematical model for unemployment by considering three variables, namely the numbers of unemployed, temporarily employed and regularly employed persons. The model is studied using the stability theory of differential equations. It is found that the model has only one equilibrium, which is non-linearly stable under certain conditions. Numerical simulation of the model has been carried out to confirm the analytical results.     

A nonlinear mathematical model to study the interactions of hot gases with cloud droplets and raindrops

In this paper, a nonlinear mathematical model is proposed and analyzed to study the interactions of hot gases with cloud droplets as well as with raindrops and their removal by rain from the stable atmosphere. The atmosphere, during rain, is assumed to consist of five nonlinearly interacting phases i.e. the vapour phase, the phase of cloud droplets, the phase of raindrops, the phase of hot gaseous pollutants and the absorbed phase of hot gases in the raindrops (if it exists). It is further assumed that these phases undergo ecological type growth and nonlinear interactions. The proposed model is analyzed using stability theory of differential equations and by numerical simulation. It is shown that the cumulative concentration of gaseous pollutants decreases due to rain and its equilibrium level depends upon the density of cloud droplets, the rate of formation of raindrops, emission rate of pollutants, the rate of falling absorbed phase on the ground, etc. It is noted here that if gases are very hot, cloud droplets are not formed and rain may not take place. In such a case gaseous pollutants may not be removed from the atmosphere due to non-occurrence of rain.     

A mathematical model of mechanical contact of bodies across a thin inhomogeneous layer

We obtain the generalized conditions of mechanical contact of bodies that model a thin inhomogeneous isotropic layer situated between them. The technique is based on the application of averaging of the equilibrium equations for the layer and the assumption of a cubic distribution of displacements over its thickness. Translated fromMatematichni Metodi ta Fiziko-Mekhanichni Polya, Vol. 40, No. 2, 1997, pp. 107–109.     

A mathematical model for asset pricing

Asset price dynamics is studied by using a system of ordinary differential equations which is derived by utilizing a new excess demand function introduced by Caginalp [4] for a market involving more information on demand and supply for a stock rather than their values at a particular price. Derivation is based on the finiteness of assets (rather than assuming unbounded arbitrage) in addition to investment strategies that are based on not only price momentum (trend) but also valuation considerations. For this new model and the older models which were extracted using the classical excess demand function by Caginalp and Balenovich [2] and [3], time evolutions of asset price are compared through numerical simulations.     

A mathematical model for continuous crystallization

J. Banasiak We discuss a mixed‐suspension, mixed‐product removal crystallizer operated at thermodynamic equilibrium. We derive and discuss the mathematical model based on population and mass balance equations and prove local existence and uniqueness of solutions using the method of characteristics. We also discuss the global existence of solutions for continuous and batch mode. Finally, a numerical simulation of a continuous crystallizer in steady state is presented. Copyright © 2015 John Wiley & Sons, Ltd.     

A mathematical model for weighing investments

This model assumes three separate investors each with a set amount of money. The full amount is to be invested in six investments, namely: long‐term bonds, short‐term bonds, treasury bonds, common stock, treasury bills, and commercial paper. The investment is made according to weights assigned to safety of principal, growth, current income, taxable income and volatility. The weights are derived by obtaining pairwise comparison matrices and then using an averaging process.     

样条曲线光顺的数学模型分析

采用函数三次样条光顺曲线,证明在样条曲线局部转角小,总转角不超过120°情况下,曲线的光顺指示函数y″(1+y′2)3/2可以简化为二阶导数曲线y″(x).由于y″(x)对x是分段折线函数,对y是线性泛函,因而定出不光顺之处及用叠加原理计算调整公式均变得很简单.此样条函数曲线光顺能够采用电脑自动化进行.     

A mathematical model for impulse resistance welding

We present a mathematical model of impulse resistance welding. It accounts for electrical, thermal and mechanical effects, which are non‐linearly coupled by the balance laws, constitutive equations and boundary conditions. The electrical effects of the weld machine are incorporated by a discrete oscillator circuit which is coupled to the field equations by a boundary condition. We prove the existence of weak solutions for a slightly simplified model which however still covers most of its essential features, e.g. the quadratic Joule heat term and a quadratic term due to non‐elastic energy dissipation. We discuss the numerical implementation in a 2D setting, present some numerical results and conclude with some remarks on future research. Copyright © 2003 John Wiley & Sons, Ltd.     

On a mathematical model for laser-induced thermotherapy

We study a mathematical model for laser-induced thermotherapy, a minimally invasive cancer treatment. The model consists of a diffusion approximation of the radiation transport equation coupled to a bio-heat equation and a model to describe the evolution of the coagulated zone. Special emphasis is laid on a refined model of the applicator device, accounting for the effect of coolant flow inside. Comparisons between experiment and simulations show that the model is able to predict the experimentally achieved temperatures reasonably well.     

Qualitative analysis for a mathematical model of aids

In this paper a mathematical model of AIDS is investigated. The conditions of the existence of equilibria and local stability of equilibria are given. The existences of transcritical bifurcation and Hopf bifurcation are also considered, in particular, the conditions for the existence of Hopf bifurcation can be given in terms of the coefficients of the characteristic equation. The method extends the application of the Hopf bifurcation theorem to higher differential equations which occur in biological models, chemical models, and epidemiological models etc.This project is supported by the National Science Foundation Tian Yuan Terms and LNM Institute of Mechanics Academy of Science.This project is supported by the National and Yunnan Province Natural Science Foundation of China.     

A graphic model for imaging of mathematical formulas

Translated from Vychislitel'nye Kompleksy i Modelirovanie Slozhnykh Sistem, pp. 39–46, Moscow State University, 1989.     

New mathematical model for nonuniform deformation of composites

A new mathematical model is suggested for nonuniform deformation of composite materials valid for arbitrary external load gradients. As a basis stochastic equations are suggested for the statics of an elastic microinhomogeneous two-component material with volumetric forces differing from zero. Expressions are obtained for all coefficients in terms of elastic constants of the components and geometric parameters of the structure.Presented at the Ninth International Conference on the Mechanics of Composite Materials (Riga, October, 1995).Translated from Mekhanika Kompozitnykh Materialov, Vol. 31, No. 3, pp. 310–318, May–June, 1995.