Gd-N共掺杂SrTiO3/TiO2复合纳米纤维制备及光催化性能

以静电纺丝技术制备的TiO_2纳米纤维为基质和反应物,结合一步水热法制得Gd-N共掺杂SrTiO_3/TiO_2复合纳米纤维光催化剂。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、高分辨透射电镜(HRTEM)、X射线光电子能谱(XPS)、紫外-可见漫反射(UV-Vis DRS)和荧光光谱(PL)等方法对其微观结构、形貌和光学性能进行表征。结果表明:SrTiO_3和TiO_2形成异质结能够使光生电子和空穴得到很好的分离,而Gd-N共掺杂产生新带隙,可以拓宽光谱响应范围至可见光区,并引起晶格缺陷,成为光生电子-空穴对的浅势捕获阱。Gd-N共掺杂与异质结的协同作用有效提高了SrTiO_3/TiO_2复合纳米纤维的可见光催化活性。     

氮和碳共掺杂TiO2纳米晶的制备及可见光催化性能

以钛酸四丁酯为钛源, 冰醋酸为抑制剂, 超细铵盐为固体载体, 采用新型溶胶-凝胶法制备了氮和碳共掺杂TiO2纳米晶(N-C-TiO2) 光催化剂. 透射电子显微镜(TEM)结果表明, N-C-TiO2样品颗粒均匀, 尺寸细小, 且分散性好; 热失重分析(TGA)、 X射线粉末衍射(XRD)和X射线光电子能谱(XPS)研究结果表明, 复合干凝胶经低温热处理, 使铵盐载体分解、 挥发去除, 样品为单一的锐钛矿相, N和C原子扩散进入晶格结点或间隙位置, 与TiO2化学键结合; 氮气等温吸附-脱附结果表明, 样品比表面积高达356 m2/g, 孔体积为0.27 mL/g. 以氙灯为可见光光源, 罗丹明B水溶液为模拟污染物, P25为参比催化剂, 在辐射强度为100 mW/cm2的可见光照射条件下, N-C-TiO2具有很高的光催化活性, 其可见光催化活性明显高于P25.     

掺杂纳米TiO2：乙醇溶胶脉冲激光法连续制备及荧光特性

采用聚焦脉冲激光轰击(PLA)浸于流动乙醇中不同金属氧化物掺杂的二氧化钛固体靶，连续制备得到一系列经MoO₃、Eu₂O₃、Fe₂O₃、WO₃等掺杂的新型纳米TiO₂乙醇溶胶。UV-Vis、荧光光谱和XRD结果表明：在所研究的掺杂纳米TiO₂乙醇溶胶中，MoO₃掺杂使纳米TiO₂乙醇溶胶荧光增强最大，当MoO₃掺杂量(ψ)在0.02%～0.50%时，其掺杂的纳米TiO₂乙醇溶胶荧光强度增强，掺杂量为0.05%时荧光强度高达1.3×10⁴(a.u.)；此外发现与sol-gel掺杂法相比，预研磨混合掺杂能更明显增强纳米TiO₂乙醇溶胶荧光。     

Ce掺杂Bi2MoO6/TiO2纳米纤维异质结的制备及可见光催化性能

以静电纺丝技术制备的TiO_2纳米纤维为基质,通过溶剂热法制备了异质结型稀土Ce掺杂Bi_2MoO_6/TiO_2复合纳米纤维。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)以及荧光光谱(PL)等分析测试手段对样品的物相、形貌和光学性能等进行表征。以罗丹明B为模拟有机污染物,研究了样品的可见光催化性能。结果表明:在稀土掺杂样品中,Ce离子进入Bi_2MoO_6晶格,部分取代Bi3+,导致晶胞膨胀,晶格畸变,形成缺陷;与TiO_2复合形成异质结,有利于光生电荷的产生、转移和有效分离,从而提高TiO_2纳米纤维的光催化活性。可见光照射180 min,罗丹明B的降解率达到95.1%。经5次循环光催化降解活性基本不变,样品具有良好的光催化稳定性。     

Ce掺杂Bi2MoO6/TiO2纳米纤维异质结的制备及可见光催化性能

以静电纺丝技术制备的TiO₂纳米纤维为基质,通过溶剂热法制备了异质结型稀土Ce掺杂Bi₂MoO₆/TiO₂复合纳米纤维。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）、透射电镜（TEM）、紫外-可见漫反射光谱（UV-Vis DRS）以及荧光光谱（PL）等分析测试手段对样品的物相、形貌和光学性能等进行表征。以罗丹明B为模拟有机污染物,研究了样品的可见光催化性能。结果表明：在稀土掺杂样品中,Ce离子进入Bi₂MoO₆晶格,部分取代Bi³⁺,导致晶胞膨胀,晶格畸变,形成缺陷;与TiO₂复合形成异质结,有利于光生电荷的产生、转移和有效分离,从而提高TiO₂纳米纤维的光催化活性。可见光照射180 min,罗丹明B的降解率达到95.1%。经5次循环光催化降解活性基本不变,样品具有良好的光催化稳定性。     

碱土金属掺杂纳米TiO2催化剂的制备与光催化活性的评价

The nanometer TiO₂ were prepared by the hydrolyze-gel method and fellowed by doping alkaline-earth metals (Mg, Ca, Sr, Ba). XRD, SEM, diffuse reflection spectra were used to investigate their characteristices. The result indicates that the average particles size of the TiO₂ is about 80 nm and keep uniformity in distributing. The product was mainly anatase in 300～400 ℃ calcinations, the einstein shift of absorption spectrum was observed after doping the alkaline-earth metals. The best mole percentages of Mg, Ca, Sr and Ba are 0.5%, 1.0%, 1.5%, 1.5% respectively. Under the same reaction conditions, it is more effective to the UV-catalyed degradation reaction that the catalysts containing Mg and Ca were calcined at 300 ℃ for 1h or containing Sr and Ba were calcined at 400 ℃ for 1 h. The photocatalystic activity is considerably depondent on pH and the concentration of the oxidant. Using the sunlight to do the degradation experimental, the result also show that the doping catalysts has higher degradation efficiency than that of pure TiO₂.     

Cu、N共掺杂TiO2纳米管光催化重整甘油制备合成气

通过碱性水热-离子交换法制备了Cu、N共掺杂TiO₂纳米管(Cu/N-TNT),对其光催化重整甘油制备合成气性能进行了研究。结果表明,Cu/N-TNT具有富含氧空位(O_V)的管状结构,N以Ti-N形式取代部分O形成杂质能级,Cu以Cu²⁺形式掺杂在催化剂晶格间隙和表面,Cu、N共掺杂促进TiO₂表面电荷有效分离,有利于其光催化重整甘油制备合成气活性和选择性的提高。紫外光照射8 h时,掺Cu量为0.15%的Cu/N-TNT催化剂上CO和H₂产量分别为7.3和8.5 mmol·g^-1,是原始TiO₂的9.1和70.8倍,n_H2/n_CO从0.52提高为1.18,n_CO/n_CO2从0.21提高至0.42。Cu/N-TNT表面N和O_V为醛类脱羰和甲酸脱水生成CO提供反应活性位点,Cu作为浅势阱提高光生电子-空穴分离效率。光生空穴(h⁺)是光催化重整甘油制备合成气过程中的主要活性物种,大量羟基自由基(·OH)和超氧自由基(·O₂^-)会导致甘油过度氧化,使CO选择性降低。     

氮掺杂TiO2/HTi2NbO7纳米片复合材料的制备及其可见光催化性能

首先采用高温固相法制备层状前驱体CsTi_2NbO_7,通过与硝酸进行质子交换反应可得到层状HTi_2NbO_7,然后将HTi_2NbO_7分散在四丁基氢氧化铵(TBAOH)溶液中进行剥离反应,得到HTi_2NbO_7纳米片悬浮液,并进行冷冻干燥处理。以尿素为N源,将冷冻干燥的HTi_2NbO_7纳米片与TiO_2前驱体(钛酸异丙酯)混合物进行高温焙烧处理,成功地合成了新型氮掺杂Ti O_2/HTi_2NbO_7纳米片(N-TTN)复合材料。采用扫描电子显微镜(SEM)、高倍透射电子显微镜(HRTEM)、X射线衍射(XRD)、N_2吸附-脱附测试、X射线光电子能谱(XPS)、紫外可见吸收光谱(UV-Vis)及电化学测试等对材料的形貌、晶体结构、比表面积、孔分布和光吸收性能等进行表征与分析。研究发现锐钛矿型TiO_2纳米颗粒均匀地分散在HTi_2NbO_7纳米片表面,在两组分间形成异质结结构。通过在可见光下降解有机污染物罗丹明B(RhB)来评价不同样品的光催化活性。结果表明,N-TTN复合材料具有最优的光催化降解活性,活性的增强主要归功于N元素的掺杂、异质结的构筑、增大的比表面积和丰富的介孔结构。     

低温下溶胶凝胶法制备TiO2纳米晶

从含过量水的溶胶出发,在室温下得到了TiO₂纳米晶。通过红外光谱,透射电子显微镜法和X射线粉末衍射法对含有过量水的溶胶体系中TiO₂纳米晶的室温形成机理进行了研究。与传统的溶胶凝胶法相比,在改良的溶胶凝胶体系中,在缩聚反应之前由于水过量使得钛的先驱体快速且充分的水解,从而生成[TiO₆]基团,随之形成TiO₂纳米晶。晶粒的尺寸为约3.5 nm,该法得到的TiO₂纳米晶比传统溶胶凝胶法得到的TiO₂纳米晶和商用光催化剂德固赛P25具有更好的光催化活性。     

Si掺杂TiO2纤维的溶胶-凝胶法制备及其光催化活性

采用溶胶-凝胶法并结合水蒸气活化制备了Si掺杂TiO₂纤维, 通过TG-DSC, XRD, FT-IR, UV-Vis-DRS, N₂吸附-脱附, SEM等手段对纤维样品的结构参数及其表面形貌进行了表征, 并以活性艳红X-3B模拟废水体系评价了其光催化活性．结果表明, 与纯TiO₂产物相比, 适量Si掺杂制得的产物是具有丰富介孔结构的TiO₂长纤维, 不仅热稳定性和晶型稳定性俱佳, 而且光催化活性得以显著提高, 经900 ℃热处理后仍能保持结晶完好的锐钛矿相; 在Si/Ti摩尔比为0.15时, 其比表面积和孔容最大, 光催化活性最佳, 该纤维作为光催化剂反应75 min, 水中X-3B的降解率可达99.6%.     

锐钛矿型TiO2水溶胶的低温制备及其表征

Anatase titanium dioxide hydrosol was prepared at low temperature by a simple method. The title material was characterized by TEM, XRD, FTIR and BET, respectively. The photocatalytic activity of the as-prepared TiO₂ was evaluated by the degradation of methyl orange solution under sunlight and the photocatalytic oxidation of acetone in air. The results showed that the titanium dioxide hydrosol was composed of anatase phase with average grain size of about 7 nm, and the crystallinity became more perfect with the increase of temperature. The BET surface areas were more than 220 m²·g^-1 for these samples. It is found that the photocatalytic activity was much better for the higher heat processing temperature. Especially, the photocatalytic activity of the sample with a heat treatment of 110 ℃ was better than that of P25. In addition, TiO₂ hydrosol also possessed good photocatalytic activity under the sunlight illumination.     

Study of the Stable Nanocrystalline TiO<Subscript>2</Subscript> Hydrosol and its Fractions

Nanodisperse TiO₂ hydrosol and two of its fractions stabilized by HCl are studied. The anatase nanocrystalline fractions are obtained by the stepped coagulation of the stable sol using dependence of coagulation thresholds on size of nanocrystallites. X-Ray investigation in small and wide angles of scattering has revealed that the anatase nanocrystallites have a shape of 2.5–3 nm thick elongated plates with 8–18 nm lateral sizes. The concentrated hydrosols with the reduced HCl content prepared from the anatase fractions are shown to form an ordered structure. Narrow fractions of TiO₂ nanocrystallites obtained from the stable hydrosols seem to be promising for the preparation of highly ordered structures with a nanometer periodicity.     

Preparation and Characterization of the Antibacterial Zn2+ or/and Ce3+ Loaded Montmorillonites

A series of modified montmorillonites including Zn²⁺ loaded montmorillonite (Zn/MMT), Ce³⁺ loaded montmorillonite (Ce/MMT) and Zn²⁺‐Ce³⁺ loaded montmorillonites (Zn‐Ce/MMT) were prepared by an ion‐exchange reaction, and characterized using X‐ray photoelectron spectroscopy (XPS), X‐ray diffraction (XRD), and scanning electron microscopy (SEM). The specific surface areas, zeta potentials and antibacterial activity of the modified montmorillonites were also investigated. Zinc and cerium were proved to be present as bivalent zinc state and trivalent cerium state in the modified montmorillonites. For the modified montmorillonites, the d₀₀₁ basal spacings increased and the particles were formed of irregular shapes. The antibacterial activity of the modified montmorillonites was enhanced with the increase of specific surface areas and zeta potentials, and Zn²⁺‐Ce³⁺ loaded montmorillonites displayed obvious synergistic antibacterial effect. When Zn/Ce atomic ratio was 1.24, the Zn‐Ce/MMT showed high antibacterial efficiency and broad‐spectrum antibacterial activity, possessing the MIC against Escherichia coli, Staphylococcus aureus, Candida albicans and Mucor of 1500, 1000, 2000 and 3000 mg·L^?1, respectively.     

Na2O掺杂C12A7材料的结构及其抗菌性能

本文利用溶胶-凝胶方法制备了Na2O掺杂的C12A7(12CaO.7Al2O3-Na2O)材料,通过X-射线衍射(XRD)、电子顺磁共振(EPR)、电感等离子体耦合-原子发射光谱(ICP-AES)和飞行时间质谱(TOF-MS)研究了材料结构与性能。选用金黄色葡萄球菌和大肠杆菌为受试菌种,研究了C12A7-Na2O的抗菌性能。结果表明,Na2O掺杂对C12A7的晶体结构以及材料中的氧负离子的浓度没有显著的影响,且C12A7-Na2O材料具有较高的抗菌性能。利用扫描电镜(SEM)对杀菌前后的金黄色葡萄球菌和大肠杆菌的菌体形态进行了观测,初步探讨了C12A7-Na2O的抗菌机理。     

Ag/TiO2聚丙烯负载膜的制备及其光催化与抗菌特性研究

以聚丙烯负载二氧化钛膜为载体,在一定浓度的AgNO3水溶液中,利用光还原在氧化钛膜表面还原Ag,制备载银二氧化钛负载膜,在室光和太阳光下,分别选择Ag/TiO2聚丙烯膜、TiO2聚丙烯膜和活性炭聚丙烯膜,研究膜的抗菌特性和光催化特性.结果表明:Ag/TiO2负载膜由于同时具有Ag和TiO2的双重效用,显示了良好的杀菌特性,无论是在室内还是太阳光下,都没有检测到活的微生物;在水溶液中检测Ag/TiO2负载膜和TiO2负载膜的光催化特性,发现由于银离子的催化活性中心的作用,光催化降解甲基橙的能力与TiO2负载膜相比,能够提高10%左右,显示了良好的光化学特性.     

Boron and nitrogen-codoped TiO2 nanorods: Synthesis, characterization, and photoelectrochemical properties

Boron and nitrogen codoped TiO₂ nanorods (BNTRs) were synthesized via two-step hydrothermal reactions using TiN as a starting material. The as-prepared samples were characterized by X-ray diffraction, field-emission scanning electron microscope (SEM), transmission electron microscopy and X-ray photoelectron spectroscopy techniques. The results showed that TiO₂ nanorods with the diameter of approximately 50–100 nm and the length of several micrometers were doped by the interstitial N and B. The nanorods were firstly formed in the hydrothermal synthesis of nitrogen doped TiO₂. The growing process of nanorods was observed by SEM and a most probable formation mechanism of the trititanate nanorods was proposed. The BNTRs showed a higher photocatalytic activity and a bigger photocurrent response than N–TiO₂ nanorods under visible light irradiation.     

纳米Sb2O3的制备与性能研究

由于Sb2O3是一种性能优良的无机阻燃剂,并与卤素阻燃剂有很好的协效作用[1],1998年,全球用于阻燃的Sb2O3达80kt以上,占阻燃剂总耗量的7%[2]。但由于其本身的极性特点,加入到纤维、塑料等高分子材料中,材料的力学性能受到很大损失[3],因此对传统的微米级的Sb2O3进行超细、表面处     

胶溶-水热晶化过程中纳米TiO2相稳定性研究

The phase stability of nanocrystaline anatase and rutile TiO2 in sols peptized at different temperature has been studied by X-ray Diffraction (XRD) and thermodynamical analysis. The results show that the stability of nanocrystaline TiO2 of different crystal types is a function of particle size. According to the thermodynamical analysis, anatase TiO2 becomes more stable than rutile TiO2 when the particle size is less than ca. 14 nm, which coincides with the experimental data obtained by XRD. Both surface Gibbs free energy and surface stress play important roles in the thermodynamically phase stability. Comparing the data calculated thermodynamically with the experimental results obtained under different temperatures, it is found that the constant K in the function relation, f=KGS, between surface free energy GS and surface stress f is temperature dependent and equal to 1 at 333 K and 2 at 453 K, respectively.     

均分散超微细α-Fe2O3水溶胶的制备

均分散微米、亚微米或纳米级α-Fe_2O_3的制备包括静态水解法［1－3］、沸腾回流水解法[4]以及微乳液反应法[5]．随着粒子尺寸的减少,则体系具有明显的表面和体积效应[6]以及光电化学性质[7]．预计均分散超微细α-Fe_2O_3将会在催化、材料等许多新技术领域获得重要的应用．但以FeCl3为原料的水解法,Fb3十浓度一般在0．02－0．04mol·L－1很窄的浓度范围之内,超出该浓度范围将得到足β-FeOOH而不是α-Fe_2O_3[8]．以Fe（NO3）3为原料,虽然Fe3十浓度可增至0．2mol·L－1,但随之而来的不利因素：（1）水解时间增加几倍;（2）产率…     

Preparation and Antibacterial Function of Quaternary Ammonium Salts Grafted Cellulose Fiber Initiated by Fe2 +-H2O2 Redox

The surface contact disinfecting technique is a newly developed method for water sterilization. In this paper, the grafted quaternary ammonium salts (QAS) antibacterial fibers were prepared and designed to apply for the surface contact disinfecting process in water treatment. The antibacterial fibers were directly prepared by grafting methacryloxylethyl benzyl dimethyl ammonium chloride (DMAE-BC) onto cellulose fiber using thiocarbonate-H₂O₂ redox system. All kinds of factors in the grafting reactions, such as reaction time, reaction temperature, monomer concentration, initiator concentration, which influence the percentage of grafting, were studied and optimized. The modified cellulose fibers were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope(SEM). The effects of the percentage of grafting of the grafted cellulose fibers on bactericidal activity were also studied. The spread plate method was used to characterize the bactericidal activity. The disinfection process was further investigated by directly observing the morphology of the bacterial cells adsorbed on the antibacterial fibers with SEM and measuring extracelluar total protein concentration in suspension. The poly(DMAE-BC)-grafted cellulose ?ber was found to exhibit particularly high activity against E.coli.