电子束辐照烟气脱硫脱氮反应器中的剂量分布的模拟计算

采用Monte-Carlo程序EGSnrcMP对能量为0.8MeV的电子束辐照烟气脱硫脱硝反应器中的剂量分布进行了模拟计算,将计算的结果运用MATLAB数学分析软件进行了数据处理,对能量为0.5MeV的电子束辐照烟气脱硫脱硝反应器中的剂量分布进行了模拟计算,并与文献中实验测量值进行了比较。结果表明:采用EGSnrcMP程序计算所得到的剂量与实验结果吻合。     

Python语言在牛顿环实验数据处理中的应用

牛顿环实验是大学物理中非常重要的一个实验,但是在实验中需要读取的数据比较多,数据处理的过程很费时间而且容易出错.为此使用Python语言编写了一个图形界面的数据处理程序,分别使用逐差法和绘图法处理实验数据,可以方便地获得最终的计算结果,节省处理数据的时间.并可对结果可视化,帮助理解实验结果.本文采用了一次实验课中对读数显微镜读取的数据作为例子,演示了本程序的使用方法,介绍了数据处理的过程,并且对两种数据处理的方法进行比较.     

VBA程序设计在落球法测液体粘滞系数实验中的应用

为了实现物理实验数据的高效处理,减少数据处理过程中的人为误差,实现数据处理的自动化。以落球法测量流体的粘滞系数为例,运用VBA编程调用Excel软件丰富的内置函数,开发了求解粘滞系数及其不确度的程序。本程序具有简单高效、界面简洁的特点,通过该程序计算的蓖麻油粘滞系数为1.42±0.12 Pa·s。同时阐述了使用VBA程序相对于使用Excel、Orgin等数据处理软件以及Visual Basic等程序处理物理实验数据的优势,有利于VBA程序设计在物理实验数据处理上的推广。     

基于Matlab GUI的拉伸法测杨氏弹性模量实验的数据处理

借助Matlab软件分别采用逐差法和最小二乘法对拉伸法测量杨氏弹性模量实验进行数据处理，利用Matlab GUI设计数据处理交互式界面，通过在GUI界面输入测量数据和实验参数，绘制出了拟合直线图，实现了杨氏模量值及其不确定度的程序计算，分析了两种方法求得的实验结果。数据处理过程操作简单，提高了学生运用软件的能力和实验效率。     

光学信号互相关法烟气流速测量的研究

工业环境中的烟气流速测量是一个很重要的问题。研究了利用抗干扰能力强、能适应恶劣环境的非介入式的光学信号互相关技术测量烟气流速。利用光学传感器获取由烟气造成的光学闪烁信号,通过高性能数据采集卡进行数据采集和A/D转换,在计算机上编制软件,对由烟气造成的光学闪烁信号进行了互相关处理,求得了烟气流经上游和下游传感器的渡越时间,从而计算出了烟气流速值。通过风洞实验,比较了该方法与传统的皮托管法的测量结果,分析了流速反演方法存在的问题及解决方法。在此基础上获得了较为满意的结果。     

密立根油滴实验数据的计算机处理

本文主要给出了利用VB编制的处理密立根油滴实验数据的程序,解决了数据处理的复杂计算的问题,利用该程序软件处理测定的电子电量值与标称值符合得较好,使该实验可以作为综合实验安排．     

强流电子束产生和传输的数值模拟

本文采用SLAC-226程序计算了1.5MV强流电子束在二极管内的加速过程以及出阳极后的传输过程。高亮度二极管的设计是高效率自由电子激光的关键技术之一。本工作的目的就是通过1.5MV注入器的数值模拟,为寻找优化的二极管结构设计提供一种有效的数值方法。程序考虑了外加电磁场和电子束自身空间电荷和自生磁场效应。我们讨论了外加磁场的各种构形以及它们对束流品质的影响,计算结果与国外EBQ程序计算结果和实验结果进行了比较,证明本工作的结果是可靠的。SLAC-226程序可以为直线感应加速器的设计提供参考数据。     

利用GEANT4和TALYS研究中子与铁作用的次级中子双微分截面

铁的次级中子双微分截面对核装置的设计、运行与维护具有重要作用。相关实验数据缺乏,且评价数据不完善,需要使用可靠的核理论模型进行计算。本工作利用GEANT4程序结合不同的中子评价数据计算了8.17, 11.5, 14.1和18 MeV等入射能量下中子轰击薄铁靶不同出射角度的次级中子双微分截面;同时利用TALYS程序和GEANT4程序结合BIC、BERT和INCLXX模型计算了25.7, 65, 100和150 MeV等入射能量下中子轰击薄铁靶不同出射角度的次级中子双微分截面,并与实验数据进行对比。研究表明,在20 MeV以下能区,ENDF/B-VIII.0库的计算结果与实验数据符合较好,BROND-3.1、CENDL-3.1、JENDL-4.0u和JEFF-3.3库的计算结果与实验数据存在差异。在20~150 MeV能区,GEANT4程序的BERT模型和TALYS程序的计算结果与实验数据符合较好,INCLXX模型和BIC模型的计算结果与实验数据存在分歧。整体来看,需要对铁的中子评价数据和核反应理论模型做进一步研究。     

测普朗克常量实验数据处理

提出了将实验数据进行分段曲线拟合,计算出曲线方程和交点的方法,并用LabVIEW8.6编写软件辅助数据处理,确定了截止电压U,经线性拟合可方便地得到精确的实验结果.     

激光状态方程实验数据在线处理程序的开发及应用

 主要介绍一套用于提高激光状态方程实验数据处理效率的程序,该数据处理程序减少了手工处理方法引入的人为因素的影响,减小了随机误差,大大提高了数据处理效率,并可以实现实验数据的在线处理。     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.