加芯毛细管填充柱的理论研究

 从速率方程和柱压降两个方面对加芯毛细管填充柱的柱效和渗透性进行了探讨，并详细讨论了柱直径、芯直径、芯根数和柱压降的关系。综合考虑柱压降、板高和拉制柱子时颗粒在柱内的镶嵌状况可知最佳柱型是３芯的毛细管填充柱。     

串联微柱在超临界流体色谱中的应用

得力于气相和液相色谱的进步,一种新的色谱技术,超临界流体色谱(SFC)异军突起,而各种柱技术又推动了这种技术的发展速度。在SFC中开管柱和填充柱都在使用,且各具特色。但除了单位柱长具有较大的压降、柱子使用长度受到限制外,填充柱显示出更多的优点。 微柱,即填充石英毛细管柱,内径小于1mm。它以弹性石英毛细管作为柱管,管内填充色谱填料。微柱的细内径和固有的高渗透性使其兼有填充柱和     

填充毛细管柱气相色谱用于快速定量分离

在内径小于1毫米的毛细管中填充颗粒状的固定相,是一种新型的气相色谱柱。Halasz和Heine在内径0.3毫米,1米长的玻璃毛细管中填装了25毫克颗粒直径为0.10—0.15毫米的Al_2O_3。在柱温为70℃,流速为13毫升/分(1大气压)的情况下,可使甲烷、乙     

毛细管离子色谱进展

从毛细管离子色谱柱制备和毛细管离子色谱仪器研制两方面评述了毛细管离子色谱目前的发展状况.毛细管离子色谱柱包括开管离子色谱柱,毛细管颗粒填充离子色谱柱以及最近几年发展起来的整体毛细管离子色谱柱.对毛细管离子色谱仪的总结包括微流量泵、小体积进样器、适合毛细管离子色谱系统的小体积抑制器、电导和光学检测器等.     

亚微米中孔SBA-15 棒状固定相在毛细管电色谱分离中的应用(英文)

采用中孔SBA-15棒状硅胶颗粒填充毛细管柱用于毛细管电色谱(CEC)分离。这一亚微米材料直径为400 nm并具有沿相同方向伸展的高度有序、均一的圆柱形中孔。棒状的特殊形态使得填充柱的通透性良好,简化了尺寸微小的CEC柱的填充过程。修饰后的棒状SBA-15填充毛细管柱成功应用于反相和离子交换电色谱分离非极性和极性样品,获得了较高柱效(140000理论塔板/m)。流速3.2cm/min时获得最低理论塔板高度为7.1 mm。范迪米特曲线说明了SBA-15孔结构的传质阻力特征。分别以芳香酸、人参、天麻提取物为样品,对亚微米固定相毛细管电色谱柱加以评价。该固定相显示出了较高的分离能力,为纳米材料在色谱固定相中的应用提供了一个新的思路。     

毛细管离子色谱进展

从毛细管离子色谱柱制备和毛细管离子色谱仪器研制两方面评述了毛细管离子色谱目前的发展状况。毛细管离子色谱柱包括开管离子色谱柱，毛细管颗粒填充离子色谱柱以及最近几年发展起来的整体毛细管离子色谱柱。对毛细管离子色谱仪的总结包括微流量泵、小体积进样器、适合毛细管离子色谱系统的小体积抑制器、电导和光学检测器等。     

电填充毛细管色谱柱性能的评价

报道了一种毛细管色谱柱的电填充技术,并进行了柱性能的评价研究。实验表明新的填充方法确保了色谱柱的柱效和重现性。     

毛细管电色谱柱制备技术的进展

介绍了毛细管电色谱开管柱、填充柱和整体柱的各种制备技术及其优势与不足,特别是对于近期发展的毛细管电色谱整体柱的制备方法及其应用进行了系统综述。引用文献100篇。     

毛细管电色谱分析苯氧羧酸类药残的研究

毛细管电色谱(CEC)是近年发展起来的一种高效、快速微柱分离方法,主要分为填充毛细管电色谱,开管毛细管电色谱和整体式毛细管电色谱.开管毛细管电色谱无柱塞和填料,不易产生气泡,且无涡流扩散,能获得较高柱效,其电渗流流速比填充柱大60%,适用于快速分析,具有良好的应用前景.     

毛细管气相色谱用固定液的进展

一、前言 自从1979年弹性石英毛细管柱问世之后.毛细管气相色谱得到了迅速的发展。以毛细管柱代替填充柱的趋势日益明显.特别是1983年大内径厚液膜毛细管柱的发展和应用使这种趋势更加肯定了。当然目前在国内填充柱气相色谱仍在例行分析中占主导地位,但是随着毛细管色谱技术在国内的进一步发展,填充柱会逐步地被毛细管柱所取代。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.