Click-dendronized poly(amide-triazole)s--effect of dendron size and polymer backbone symmetry on self-assembling and gelation properties

Nine dendronized poly(amide-triazole)s 2-Gm Gn (m=1-3, n=1-3), were prepared by the 1:1 copolymerization between AA-type dendritic diazides 4-Gm (m=1-3) and BB-type dendritic diacetylenes 5-Gn (n=1-3) under the copper(I)-mediated click coupling conditions. The degree of polymerization value of the polymers was found to range from 15-50, and decreased with increasing size of the dendron, suggesting steric hindrance had a retardation role on the copolymerization efficiency. Based on FT-IR and (1)H NMR studies, it was found that significantly strong, interchain hydrogen bonding between the amide units was present in the solution state after copolymerization, whereas the monomers 4-Gm and 5-Gn were devoid of any intermolecular hydrogen-bonding interaction. Hence a positive allosteric hydrogen-bonding effect was observed after polymerization, and could be rationalized by the zip effect. The strength of the interchain association in polymers 2-Gm Gn was found to decrease with increasing size of the dendron (i.e., 2-G1 G1>2-G1 G2>2-G2 G1≈2-G2 G2>2-G1 G3≈2-G3 G1>2-G2 G3≈2-G3 G2>2-G3 G3). Among the nine polymers, only 2-G1 G2 and 2-G2 G1 were good organogelators for aromatic solvents, while the 2-G2 G2 polymer, bearing the closest structural resemblance to the previously reported organogelator 1-G2 prepared from the polymerization of AB-type monomers, was devoid of gelating power. Careful analysis of structures of the present polymer series 2-Gm Gn and the previously reported series 1-Gn suggested that the polymer backbone symmetry played a subtle role in controlling their self-assembling and gelating properties.     

Artificial aldolases from peptide dendrimer combinatorial libraries

Peptide dendrimers were investigated as synthetic models for aldolase enzymes. Combinatorial libraries were prepared with aldolase active residues such as lysine and proline placed at the dendrimer core or near the surface. On-bead selection for aldolase activity was carried out using the dye-labelled 1,3-diketone 1a, suitable for covalent trapping of enamine-reactive side-chains, and the fluorogenic enolization probe 6. Aldolase dendrimers catalyzed the aldol reaction of acetone, dihydroxyacetone and cyclohexanone with nitrobenzaldehyde. Much like enzymes, the dendrimers exhibited strong aldolase activity in aqueous medium, but were also active in organic solvent. Dendrimer-catalyzed aldol reactions reached complete conversion in 3 h at 25 degrees C with 1 mol% catalyst and gave aldol products with up to 65% ee. A positive dendritic effect in catalysis was observed with both lysine and proline based aldolase dendrimer catalysts.     

Modeling acid and cationic catalysis on the reactivity of duocarmycins

Several catalyzed alkylation reactions of 9-methyladenine by a model [CPI, cyclopropa[c]pyrrolo[3,2-e]indol-4(5H)-one (1)] of duocarmycin anticancer drugs have been compared to the uncatalyzed reaction in gas phase and in water solvent bulk, using density functional theory at the B3LYP level with the 6-31+G(d,p) basis set and C-PCM solvation model. The effect on the CPI reactivity induced by water, formic and phosphoric acids (general acid catalysis), H3O+ (specific acid catalysis), sodium, and ammonium cation complexation (cationic catalysis) has been investigated. The calculations indicate that the specific acid catalysis and the catalysis induced by sodium cation complexation are strong in the gas phase, but solvation reduces them dramatically by electrostatic effects. The specific acid catalysis is still operative, but strongly reduced in water solution, where the reaction barrier is reduced by 8.6 kcal mol(-1) in comparison to the uncatalyzed reaction. The general acid catalysis induced by phosphoric acid (-7.3 kcal mol(-1)) and the catalysis induced by Na+ and NH4+ complexation become competitive, with a catalytic effect of -3.6 and -4.1 kcal mol(-1) in water, respectively. With the specific acid catalysis, the high acidity (low pK(a) value) of the conjugated acid of CPI (CPIH+), computed in water solution using both C-PCM (pK(a) = +2.6) and PCM-B3LYP/6-31+G(d,p) (pK(a) = +2.4) solvation models, suggests that the catalytic effects induced by NH4+ complexation could become more important than the specific acid catalysis and the general catalysis by H3PO4 under physiological conditions, due to concentration effects of the catalysts.     

Pd catalysis on dendronized solid support: generation effects and the influence of the backbone structure

Recent studies revealed that catalysts, prepared on dendronized support, frequently exhibit enhanced activity and selectivity as compared to their non-dendronized analogues. Regretfully, in early studies of the supported dendritic catalysis, no particular attention was paid to the coordinative nature of the dendritic backbone. In this study, we functionalized Wang polystyrene support with three types of dendritic templates: poly(aril benzyl ether), poly(aryl benzyl thioether), and poly(aryl benzyl amine). These dendronized resins were further decorated with phosphine ligands on the periphery and complexed with a Pd(0) catalytic precursor. The catalysis of the Heck and Suzuki reactions of bromobenzene with the first to third generation supported dendritic catalysts was examined and compared to that of the non-dendritic analogues. All of the examined reactions revealed a positive dendritic effect, reflected in up to 5-fold increase in yield, in the most prominent case. The reasons for the observed effect are the proximity of the ligating sites translated into reduced cross-linking and, probably, the increased distance of the catalyst from the polymer matrix. We proved, however, that the latter could not be achieved with a linear spacer. Although the Suzuki reaction was rather insensitive to the backbone structure, the Heck reaction catalysis at 80 degrees C exhibited substantial sensitivity to the nature of the dendritic backbone, with the polyether structure demonstrating the best outcome. This is the first demonstration of the influence of the coordinative ability of the backbone on the activity of a supported dendritic catalyst.     

Dendroclefts: Optically Active Dendritic Receptors for the Selective Recognition and Chiroptical Sensing of Monosaccharide Guests

The enantiomerically pure dendritic receptors with cleft-type recognition sites (dendroclefts) of generation zero ((−)- G0 ), one ((−)- G1 ), and two ((−)- G2 ) (Fig. 1) were prepared for the complexation of monosaccharides via H-bonding. They incorporate a rigid, optically active 9,9′-spirobi[9H-fluorene] core bearing 2,6-bis(carbonylamino)pyridine moieties as H-bonding sites in the 2,2′-positions. The dendritic shells in (−)- G1 and (−)- G2 are made out of a novel type of dendritic wedges of the first ( 8 ; Scheme 2) and second ( 13 ; Scheme 3) generations, which contain only donor O-atoms and are attached to the H-bonding edges of the core via glycine spacers (Scheme 4). The formation of stable 1 : 1 complexes (association constants K_a between 100 and 600 M ⁻¹, T=298 K; Table 2) between the three receptors and pyranosides in CHCl₃ was confirmed by ¹H-NMR and CD binding titrations as well as by Job plot analyses. The degree of dendritic branching was found to exert a profound effect on the stereoselectivity of the recognition processes. The binding enantioselectivity decreases with increasing degree of branching, whereas the diastereoselectivity increases. The ¹H-NMR analysis showed that the N−H⋅⋅⋅O H-bonds between the amide NH groups around the core and the sugar O-atoms become weakened with increasing dendritic generation, presumably due to steric factors and competition from intramolecular H-bonding between these amide groups and the O-atoms of the dendritic shell. The chiroptical properties of the dendroclefts respond to guest binding in a stereoselective manner. Whereas large differential changes are seen in the circular dichroism (CD) spectra of (−)- G0 and (−)- G1 upon complexation of the enantiomeric monosaccharides (Figs. 3 and 4), the CD spectra of the higher-generation derivative (−)- G2 respond to a lesser extent to guest complexation (Fig. 5). This is indicative of a different binding geometry, more remote from the core chromophore. With their higher masses, the dendroclefts (−)- G1 and (−)- G2 are readily recycled from host-guest solutions by gel-permeation chromatography. The strong CD sensory response and the easy recyclability suggest applications of chiral dendroclefts as sensors for biologically important molecules.     

Dendritic effects in catalysis by Pd complexes of bidentate phosphines on a dendronized support: Heck vs. carbonylation reactions

Bidentate phosphine ligands have been prepared on polystyrene beads modified with polyether dendron spacers. When complexed to Pd(0), these systems exhibited a negative dendritic effect on Heck catalysis (contrary to the analogous monodentate phosphine systems), but mostly a positive influence on carbonylation. This opposite influence of the dendronization falls into line with other differences in the optimal ligand structure for the two reactions. The negative effect on the Heck catalysis with bidentate phosphines may indicate that dendrimer-induced reduction in the cross-linking upon Pd complexation is responsible for the positive effect in the corresponding monodentate phosphine systems.     

Interactions of carbon nanotubes with pyrene‐functionalized linear‐dendritic hybrid polymers

A series of linear‐dendritic hybrid polymers, containing pyrene units at the periphery of aliphatic polyester dendrons, were prepared for the purpose of dispersing shortened single‐walled carbon nanotubes (SWNTs) in tetrahydrofuran (THF). The prepared hybrids contained 1, 2, 4, 8, or 16 (G0 through G4) pyrene units and a linear segment composed of polystyrene. It was found that a minimum of four pyrene units was necessary to form a strong enough interaction with SWNTs to enable steric stabilization in solution, when using a linear polymer segment of 11.5 kDa. Increasing either the number of pyrene units per polymer chain or the length of the polymer segment to 18.0 kDa did not improve nanotube solubility, whereas decreasing the polymer length resulted in significantly less effective nanotube dissolution. The G4 dendron alone, without the linear polystyrene segment, was also found to impart solubility to the nanotubes in THF. Interactions between the series of linear‐dendritic hybrids and full‐length multiwalled carbon nanotubes were also investigated, and it was found that the polymers exhibited strong interactions with the multiwalled carbon nanotube surface, resulting in the formation of stable solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1016–1028, 2010     

Supramolecular H-bonded assemblies of redox-active metallodendrimers and positive and unusual dendritic effects on the recognition of H2PO4-

The DSM polyamine dendrimers dend-DAB-(NH2)x of generations 1 (x = 4) to 4 (x = 32) form H-bonded dendritic assemblies with the phenol AB3 units p-HOC6H4C(CH2CHCH2)3 and p-HOC6H4C{(CH2)3SiCH2NHCOFc}3 (Fc = ferrocenyl), as shown by the shifts of the NH2 and OH signals giving a concentration-dependent common signal between 2.4 and 4.1 ppm in CDCl3. The supramolecular dendrimers efficiently recognize H2PO4- anions with positive and unusual dendritic effects upon electrochemical titration involving half-stoichiometry for G1, a sudden cyclovoltammetry wave change at the equivalent point, and a dramatic intensity decrease of the new wave.     

Self-assembly of two-component peptidic dendrimers: dendritic effects on gel-phase materials

The self-assembly of diaminododecane solubilised by different dendritic peptides, possessing increasing levels of dendritic branching, was investigated. The dendritic peptides were based on l-lysine building blocks and were of first, second and third generation, containing one, three and seven amino acid repeat units respectively. By applying these structures as potential gelator units, the dendritic effect on gelation was investigated. The degree of structuring was modulated, with the dendritic peptide controlling the aggregate morphology and the ability of the self-assembled state to manifest itself macroscopically as gelation. First generation gelator units (G1) did not induce macroscopic gelation with diaminododecane under any conditions, whilst those self-assemblies based on second (G2) and third (G3) generation branches did form gel-phase materials. Furthermore, gel-phase materials based on G2 exhibited optimum gelation behaviour compared to those based on G3(in terms of the thermal strength of the materials). Circular dichroism showed that the dendritic effect, programmed in at the molecular level, is directly related to the degree of chiral organisation within the self-assembled state. The dendritic generation of the peptide controls the pattern of amide-amide hydrogen bonding in terms of binding strength and alignment as determined using NMR methods. The mode of self-assembly can be qualitatively rationalised in terms of an attractive enthalpic interaction (i.e., amide-amide hydrogen bonding), a repulsive interaction (i.e., steric interactions between dendritic peptides) and an entropic term related to the hierarchical organisation of the gelator building blocks. It is argued that the balance between these factors determines the nature of the dendritic effect.     

Synthesis of fluorescent dendritic 8-hydroxyquinoline ligands and investigation on their coordinated Zn(II) complexes

A series of luminescent PAMAM dendrons emanating from 8-hydroxyquinoline have been synthesized and their coordination with Zn(II) was investigated for the first time. The obtained dendritic Zn(II) complexes were soluble in common organic solvents. It was found that the luminescence intensity of G2 dendron 6 was higher than that of G1 dendron 4. Furthermore, when they were coordinated with Zn(II), red-shift was observed and the intensities of the coordinated Zn(II) complexes were higher than that of the corresponding ligands.     

Assemblies of redox-active metallodendrimers using hydrogen bonding for the electrochemical recognition of the H2PO4- and adenosine-triphosphate (ATP2-) anions

Two families of five metallodendrimers have been assembled by hydrogen bonding between the primary amino groups of DSM dendrimers G(n)-DAB-dendr-(NH(2))x (n = 1-5; x = 4, 8, 16, 32, 64) and the OH group of phenol dendrons containing a triallyl or a triferrocenylalkyl tripod in para position. These H-bonded dendrimers noted G(1)-DAB-12Fc, G(2)-DAB-24Fc, G(3)-DAB-48Fc, G(4)-DAB-96Fc, and G(5)-DAB-192Fc have been characterized as resulting from fast, reversible hydrogen bonding by the single broad signal observed in (1)H NMR for the three NH(2) + OH protons whose location depends on the concentration. The cyclic voltammograms (CVs) show a single reversible ferrocenyl wave due to the equivalence of these groups and the fast rotation of the supramolecular ensemble compared to the CV time scale. A new CV wave appears at less anodic potential upon addition of H(2)PO(4)(-) or adenosine-triphosphate (ATP(2)(-)) anion as a tetrabutylammonium salt as with previously studied ferrocenyl dendrimers. In addition, other specific and remarkable features are the fact that the new CV wave is much less intense than the initial one and the dramatically sudden disappearance of the initial CV wave at the equivalent point indicating the formation of a large supramolecular assembly with the hydrogenophosphate groups. Finally, the variation of the number of equivalent anions with the generation number to reach the equivalent point also suggests that the competition between the amino- and amido group for the interaction with hydrogenophosphate depends on the generation number. Recognition by these supramolecular dendrimers of H(2)PO(4)(-) and ATP(2)(-) follows the model of the relatively strong-interaction type in the Kaifer-Echegoyen model, which allows access to the ratio of association constants K(+)/K(0). A positive dendritic effect is found for the recognition of H(2)PO(4)(-) (i.e., the difference of potentials DeltaE(1/2) between the initial CV wave and the new one and the K(+)/K(0) value increase as the generation number increases) whereas the dendritic effect is slightly negative for the recognition of ATP(2)(-).     

Polyaryl ether dendrimer with a 4-phenylacetyl-5-pyrazolone-based terbium(III) complex as core: synthesis and photophysical properties

A series of novel dendritic beta-diketone ligands, 1-phenyl-3-[G-n]-4-phenylacetyl-5-pyrazolone (n = 0-3, G stands for polyaryl ether), were synthesized by introducing Fréchet-type dendritic branches. The corresponding Tb3+-cored dendritic complexes were characterized by X-ray crystallography, elemental analysis, ESI mass spectra, and FT-IR spectra. These dendritic complexes, prepared from aqueous solution, exhibit high stability. Interestingly, the study of photophysical properties shows that the luminescence quantum yields of the dendritic Tb-complexes increase from 0.1 to 2.26% with an increase of the dendritic generation from 0 to 3. Importantly, an "energy-reservoir effect" was observed in the dendritic system using the method based on the resonance energy transfer from these complexes to rhodamine 6G. With the increase of the dendritic generation, the metal-centered luminescence quantum yield was almost the same, and the energy transfer (phi(transfer)) from the ligand to Tb(3+) increased. Further measurements of the triplet state and oxygen quenching of these dendritic complexes verify that this enhancement of the energy transfer (phi(transfer)) is attributed to both an "antenna effect" and a "shell effect".     

Catalytic Oxidation of Cyclohexene by Dendrimer-bond Metal Catalysts

Since Tomalia and Dovornic discussed the promising outlook of surface-functionalized dendrimer catalysts in 1994, [1] dendritic catalysts have been proposed to many kinds of catalysis.These well-defined macromolecular structures enable the construction of precisely controlled catalyst structures. The large number of the peripheral functionalities enhanced their activity in many processes. [2,3] We report herein a new method of using the dendritic catalysts in the oxidation of cyclohexene. The reactions give some interesting results.In short, the synthesis of the dendritic catalysts was initiated from the well-known PAMAM dendrimers by using their peripheral ammonia groups. The condensation reactions of these ammonia groups and salicyaldehyde (SA) offer the ligands PAMAMSA with different generation (G) numbers.dendrimer-bond PAMAMSA-Ni(Ⅱ) complexes.In the presence of the dendritic PAMAMSA-Ni(Ⅱ) catalysts, cyclohexene was fully oxidized under 1 atm of molecular oxygen at 70℃. All the oxidations give 7-oxabicyclo[4.1.0]heptane 1,2-cyclohexen-l-ol 2, 2-cyclohexen-1-one 3 and 7-oxabicyclo [4.1.0]heptan-2-one 4 as the major products. The results of the oxidation are shown in the table below (table 1):Table 1 Oxidation of cvclohexene bv PAMAMSA-Ni2+ catalysts** Reaction condition: cat. 2mg, cyclohexene 5mL, 1atm O2, 6hat 70℃.**Oxygen absorption (mL) per mol catalyst.It can be seen from table that the oxidations give a new product 7-oxabicyclo[4.1.0]heptan-2-one 4, which is the first reported product in this oxidation. Meanwhile, product 4possesses relatively high selectivity in the six oxidation processes. It will arise much more emphasison the optimizing of these reactions.     

Self-assembly of dendritic tris(crown ether) hexagons and their complexation with dibenzylammonium cations

The construction of a new series of dendritic tris(crown ether) hexagons via coordination-driven self-assembly is described. Combining 120° crown ether-containing diplatinum(II) acceptors with 120° dendritic dipyridyl donors in a 1:1 ratio allows for the formation of a new family of dendritic triple crown ether derivatives with a hexagonal cavity in quantitative yields. The number and the position of these pendant groups can be precisely controlled on the hexagonal metallacycle. The structures of all dendritic multiple crown ether hexgaons are confirmed by multinuclear NMR ((1)H and (31)P), ESI-MS and ESI-TOF-MS, and elemental analysis. The complexation of these dendritic trivalent receptors with dibenzylammonium cations was investigated by (1)H NMR titration experiments. The thermodynamic binding constants between the receptors and guests were established by using the nonlinear least-squares fit method based on (1)H NMR titration experiments. It was found that the association constants of each assembly decrease correspondingly upon the increase of the generation of the dendrons from [G0] to [G3], which might be caused by the steric effect of the dendrons on host-guest complexation.     

Synthesis and photophysical characterization of amphiphilic dendritic–linear–dendritic block copolymers

Amphiphilic dendritic–linear–dendritic triblock copolymers based on hydrophilic linear poly(ethylene oxide) (PEO) and hydrophobic dendritic carbosilane were synthesized with a divergent approach at the allyl end groups of diallyl‐terminated PEO. Their micellar characteristics in an aqueous phase were investigated with dynamic light scattering, fluorescence techniques, and transmission electron microscopy. The block copolymer with the dendritic moiety of a third generation could not be dispersed in water. The block copolymers with the first (PEO–D ‐Si‐1G) and second (PEO–D ‐Si‐2G) generations of dendritic carbosilane blocks formed micelles in an aqueous phase. The critical micelle concentrations of PEO–D ‐Si‐1G and PEO–D ‐Si‐2G, determined by a fluorescence technique, were 27 and 16 mg/L, respectively. The mean diameters of the micelles of PEO–D ‐Si‐1G and PEO–D ‐Si‐2G, measured by dynamic light scattering, were 170 and 190 nm, respectively, which suggests that the micelles had a multicore‐type structure. The partition equilibrium constants of pyrene in the micellar solution increased with the increasing size of the dendritic block (e.g., 7.68 × 10⁴ for PEO–D ‐Si‐1G and 9.57 × 10⁴ for PEO–D ‐Si‐2G). The steady‐state fluorescence anisotropy values (r) of 1,6‐diphenyl‐1,3,5‐hexatriene were 0.06 for PEO–D ‐Si‐1G and 0.09 for PEO–D ‐Si‐2G. The r values were lower than those of the linear polymeric amphiphiles, suggesting that the microviscosity of the dendritic micellar core was lower than that of the linear polymeric analogues. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 918–926, 2001     

A peptide dendrimer enzyme model with a single catalytic site at the core

Catalytic esterase peptide dendrimers with a core active site were discovered by functional screening of a 65,536-member combinatorial library of third-generation peptide dendrimers using fluorogenic 1-acyloxypyrene-3,6,8-trisulfonates as substrates. In the best catalyst, RMG3, ((AcTyrThr)(8)(DapTrpGly)(4)(DapArgSerGly)(2)DapHisSerNH2), ester hydrolysis is catalyzed by a single catalytic histidine residue at the dendrimer core. A pair of arginine residues in the first-generation branch assists substrate binding. The catalytic proficiency of dendrimer RMG3 (kcat/KM = 860 M(-1) min(-1) at pH 6.9) per catalytic site is comparable to that of the multivalent esterase dendrimer A3 ((AcHisSer)(8)(DapHisSer)(4)(DapHisSer)2DapHisSerNH2) which has fifteen histidines and five catalytic sites (Delort, E. et al. J. Am. Chem. Soc. 2004, 126, 15642-15643). Remarkably, catalysis in the single site dendrimer RMG3 is enhanced by the outer dendritic branches consisting of aromatic amino acids. These interactions take place in a relatively compact conformation similar to a molten globule protein as demonstrated by diffusion NMR. In another dendrimer, HG3 ((AcIlePro)(8)(DapIleThr)(4)(DapHisAla)(2)DapHisLeuNH2) by contrast, catalysis by a core of three histidine residues is unaffected by the outer dendritic layers. Dendrimer HG3 or its core HG1 exhibit comparable activity to the first-generation dendrimer A1 ((AcHisSer)(2)DapHisSerNH2). The compactness of dendrimer HG3 in solution is close to that a denatured peptide. These experiments document the first esterase peptide dendrimer enzyme models with a single catalytic site and suggest a possible relationship between packing and catalysis in these systems.     

Amphiphilic Dendrimer as Reverse Micelle: Synthesis,Characterization and Application as Homogeneous Organocatalyst

The core and surface terminal groups are the two main catalytic sites in a dendrimer. In most of the reported examples, the catalytic sites in dendritic catalysis are the surface terminal functional groups. This perspective article concerned with the dendrimer based catalysis, involving these two catalytic sites and the dendrimer cavities. The interior cavities provide the nanoscale reactor sites, by creating reverse micelle like appearance for catalysis. In exploring the significant achievements in this area, a low generation PAMAM dendrimer with amphiphilic nature, having a polymeric core with large number of pendent amino groups was synthesized and concentrated its catalytic activity. The key features with respect to positive and/or negative catalytic activity was highlighted by synthesizing various aryl and heteroaryl 2-substituted benzimidazoles. The synthesized dendritic organocatalyst was proved to be amazingly reactive and gave high yield of products within a few minutes at room temperature with low catalyst loading. Here, a new stable hemiaminal, the species rarely been detected and much less isolated in bulk, was obtained during the synthesis of benzimidazoles. Moreover, this is the first reported method for the synthesis of benzimidazoles, using the homogeneous PAMAM dendrimer as a basic organocatalyst.     

Synthesis of fullerodendrons with an ammonium unit at the focal point and their cooperative self-assembly on a fluorescent ditopic crown ether receptor

Dendritic branches with 1, 2, or 4 peripheral fullerene subunits and an ammonium function at the focal point have been prepared. Their ability to form self-assembled dendritic structures with oligophenylenevinylene receptors bearing one or two crown ether moieties has been evidenced by ES-MS studies for the first time. These supramolecular complexes are multicomponent photoactive devices in which the emission of the central receptor is dramatically quenched by the fullerene units. This new property resulting from the association of the different molecular subunits allowed detailed investigations of the self-assembly process by means of fluorescence titrations. The binding studies have revealed positive cooperative effects for the assembly of the fullerodendrimers with the ditopic receptor. Interestingly, the stability of the supramolecular 2:1 structures increases as the size of the dendritic unit increases. This positive dendritic effect has been explained by the larger number of possible intramolecular fullerene-fullerene interactions between the two dendritic guests when the number of fullerene subunits is increased.     

激发态分子内质子转移(ESIPT)发色团修饰的树枝形聚合物合成及光物理研究

设计合成了0～4代外围修饰激发态分子内质子转移(ESIPT)发色团的聚酰胺-胺树枝形聚合物G0～G4,化合物结构经过IR,1H NMR,13C NMR和MS表征.稳态光谱研究表明,树枝形聚合物在四氢呋喃溶液中形成了聚集体,发色团酮式发光随着化合物代数增大呈先增加后减小的变化.质子化树枝形聚合物G1-H～G4-H能溶于水,并在水中形成20 nm左右的聚集体,发色团在聚集体疏水区中构象受限,仅发射酮式发光,并且发光强度受树枝形聚合物分子大小的影响.     

两种偶氮分子玻璃材料的光致取向特性

利用光诱导双折射和偏振红外光谱法研究了2种无定形树枝状偶氮分子材料G1-AZ-CN和G2-AZ-CN的光致取向行为, 对其偶氮生色团及非光响应性星形核的光致取向速度、 取向松弛速度和饱和取向程度进行了系统研究. 结果表明, G2-AZ-CN中偶氮生色团和星形核的光致取向速度快于G1-AZ-CN, 但其取向松弛速度慢于G1-AZ-CN, 这与G2-AZ-CN具有更高的偶氮生色团密度有关. G1-AZ-CN具有较高的饱和取向程度及较好的取向稳定性. 与具有相同类型偶氮生色团的偶氮聚合物BP-AZ-CN相比, G1-AZ-CN和G2-AZ-CN中偶氮生色团表现出较慢的取向速度. 其取向行为与其特殊的星形分子结构有关.