Voltammetric determination of trace amounts of gold with a chemically modified carbon paste electrode

A carbon paste electrode chemically modified with anion-exchangers is used for the voltammetric determination of gold(III). Tetrachloro- or tetrabromo-aurate(III) is preconcentrated on the electrode surface, modified with Amberlite LA2, and the electrode is transferred to an electrochemical cell for voltammetric measurements by cathodic stripping. The response depends on the concentration of gold in the bulk solution, preconcentration time, and other parameters. Detection limits are 100–300 μg l^?1 depending on the conditions. Many elements forming stable halo complex anions interfere.     

Voltammetric determination of trace amounts of gold(III) with a carbon paste electrode modified with chelating resin

A carbon paste electrode modified with chelating resin (ammino-isopropylmercaptan-type cross-linked chelating resins) for the voltammetric determination of gold(III) was characterized by cyclic voltammetry. The gold(III) ion is accumulated on the surface of the modified electrode only by the chelating effect of the modifier in the carbon paste, without application of a potential. After exchange of the medium the accumulated amount of gold(III) is determined by voltammetry in a blank electrolyte solution. The response depends on both the concentration of gold and the accumulation time. For a 5-min preconcentration time, a linear calibration graph was obtained in the range 3 × 10^?8-1 × 10^?6 M and the detection limit was about 1 × 10^?8 M. A combination of chemical and electrochemical renewal allows the use of a single modified electrode in multiple analytical determinations over several days. For ten preconcentration—determination—renewal cycles [2 × 10^?7 M Au(III)], the response could be reproduced with 4.7% relative standard deviation. Many parameters such as the composition of the paste and pH influence the response of the measurement. Many other metal ions have no or little effect on the determination of gold. The procedure was applied to the determination of gold in minerals, copper and anode mud, with good results.     

Determination of trace amounts of silver with a chemically modified carbon paste electrode

A method for the determination of trace amounts of silver with a chemically modified carbon paste electrode is described. The modified electrode is prepared by simply mixing a chelating resin (a polythioether backbone and dioxymonosulphur polyethylene polyimines in the side-chain polymer) with graphite powder and Nujol oil. By immersing the electrode in a silver sample solution (pH = 6.5–7.5), silver can be adsorbed on the electrode surface and then determined by voltammetry in a separate blank solution. The response depends on the concentration of silver and the preconcentration time. For a preconcentration time of 5 min, the detection limit is about 3 × 10^?10 M and the linear range is from 5 × 10^?10 to 1 × 10^?7 M with a relative standard deviation of 4%. Many common metal ions have no or little effect on the determination of silver. The recommended procedure was applied to the determination of trace amounts of silver in waste water.     

Stripping voltammetric determination of trace amounts of mercury using a carbon paste electrode modified with 2-mercapto-4(3H)-quinazolinone

A carbon paste electrode modified with 2-mercapto-4(3H)-quinazolinone was used for the voltammetric determination of mercury(II). Mercury was preconcentrated onto the surface of the modified electrode only by the complexing effect of the modifier without application of potential (i.e. in open-circuit conditions). After exchange of the medium, the accumulated amount of mercury(II) was determined by differential pulse anodic stripping voltammetry. The response depended on the concentration of mercury in the bulk solution, preconcentration time, and other parameters. The detection limit was 0.1 g 1^–1 Hg(II) for a preconcentration time of 15 min. Preconcentration for suitable times yielded a linear calibration graph from 0.5 to 6000 g 1^–1 Hg(II). For multiple determinations (5 runs), the relative standard deviation was 5% for a concentration of 100 g 1^–1 Hg(II). The proposed procedure was used to determine trace mercury in plant and sewage sludge samples with good results.On leave from Hainan University, Hainan Peoples Republic of China     

Voltammetric determination of trace mercury at a sonogel-carbon electrode modified with poly-3-methylthiophene

The sonogel-carbon electrode is a new class of sol-gel electrode that exhibit favourable mechanics and electrics properties to be used as electrochemical sensor. In this paper, a modified sonogel-carbon electrode is proposed to determine mercury at trace levels. The modified electrode is obtained by electropolymerization of 3-methylthiophene on the surface of a bare sonogel-carbon electrode. This electrode shows high selectivity and sensitivity and linear response towards Hg(II), with a detection limit of 1.4 × 10⁻³ mg l⁻¹. The electrode is reusable by a simple chemical cleaning procedure. No deterioration was observed in the electrode response during at least 1 week of successive measurements.     

Voltammetric determination of gold with a Rhodamine B-modified carbon paste electrode

Summary The voltammetric behaviour of gold on carbon paste electrodes chemically modified with Rhodamine B by means of electrostatical binding was studied. The dye was attached to the electrode material with hexane sulphonic acid. Gold was determined by differential pulse voltammetry after preconcentration under open circuit conditions and medium exchange. Thus, 5 g Au/l could be analyzed. Linearities between signal response and concentration were found for concentrations up to 10 mg/l when measuring in the differential pulse mode. Parameters like composition of the paste and of the analyte solution as well as interferences with other ions were investigated.     

Voltammetric determination of pentachlorophenol with a silica gel-modified carbon paste electrode

Summary The anodic voltammetric behaviour of pentachlorophenol at a silica gel-modified carbon paste electrode in aqueous solution is reported. Adsorption of the fungicide onto the electrode under open-circuit conditions is followed by application of either differential or square wave voltammetry. The results obtained by differential pulse voltammetry at pH 2.9, with a modifier concentration of 10% and accumulation times of 120 and 300 s, allowed the development of a method to determine pentachlorophenol in the ranges of 1.0×10⁻⁶–1.0×10⁻⁵ and 1.0×10⁻⁷–1.0×10⁻⁶ mol l⁻¹. The relative standard deviation is 2.6% for a concentration of 2.0×10⁻⁷ mol l⁻¹, with a detection limit of 1.8×10⁻⁸ mol l⁻¹ (5 ppb). The effect of other chlorophenols was studied. The results obtained by square wave voltammetry showed a behaviour typical of an irreversible electron transfer. Amplitude, step height and frequency were optimised, taking into account the resolution of the voltammetric response. No improvement in sensitivity was obtained with respect to DPV. Good results were obtained by applying the proposed differential-pulse voltammetric method to the determination of pentachlorophenol in a commercial fungicide.     

Voltammetric determination of traces of cobalt(II) with a chemically modified carbon paste electrode

Summary A new preconcentration and voltammetric determination method for cobalt(II) in aqueous solution with a chemically modified electrode is proposed. The accumulation behaviour and voltammetry of cobalt(II) has been investigated with a carbon paste electrode modified with cationexchanger and 1,10-phenanthroline. The electrochemical response is characterized with respect to carbon paste composition, pH, preconcentration time, cobalt(II) concentration and other variables. For a 3-min preconcentration time, the electrode gives good linearity for 1×10^–7 to 4×10^–6 mol/l Co(II), a detection limit of 8×10^–8 mol/l. The response can be reproduced with a 4.0% relative standard deviation. The method is fairly free from many coexisting ions interferences. A rapid and convenient renewal procedure allows the use of a single electrode in multiple analytical determinations over several days. Satisfactory results are obtained for the determination of cobalt in a variety of certified standard reference materials.     

Voltammetric determination of mifepristone at a DNA-modified carbon paste electrode

A new strategy for the preparation of a DNA-modified carbon paste electrode is developed. It is found that the anodic response of mifepristone is greatly enhanced at the dsDNA-modified carbon paste electrode comparing with that obtained at the bare electrode, while the response at a ssDNA-modified electrode is similar to bare electrode. So the dsDNA-modified electrode is employed as a sensitive biosensor for the detection of mifepristone. A linear dependence of the peak currents on the concentration is observed in the range 2.0 x 10(-7) approximately 2.0 x 10(6) mol/L, with a detection limit of 1.0 x 10(-7) mol/L. The relative standard deviation is 4.3% for six successive determinations of 1.0 x 10(6) mol/L mifepristone. The determination of mifepristone tablets is carried out and satisfactory results are obtained.     

Voltammetric behavior and determination of bismuth on sodium humate modified carbon paste electrode

The preconcentration and voltammetric behavior of Bi^III on a sodium humate modified carbon paste electrode was studied by means of cyclic voltammetry (CV) and differential pulse stripping voltammetry (DPSV). The proposed measurement involves an initial nonelectrolytic preconcentration step in which Bi^III is complexed by the surface modifier in a solution of 0.05 M KNO₃-0.0106 M HNO₃ (pH 2.0) and a subsequent electrochemical scan step in which the preconcentrated Bi^III was reduced and then oxidized promptly in supporting electrolyte of 0.5 M HNO₃. The resulting DPSV anodic current was proportional to the concentration of Bi^III ion over the range of 4.78 × 10⁻⁸–1.44 × 10⁻⁵ M. The detection limit was 4.78 × 10⁻⁸ M. The proposed method was used to determine bismuth in various samples. Various factors affecting the electrode behavior were also investigated at the same time.     

Voltammetric determination of itopride using carbon paste electrode modified with Gd doped TiO2 nanotubes

In the present work TiO₂ nanotubes (TNT) have been synthesized by alkaline hydrothermal transformation. Then they have been doped with Gd element. Characterizations of doped and undoped TNT have been done with TEM and SEM. The chemical composition was analyzed by EDX, Raman and FTIR spectroscopy. The crystal structure was characterized by XRD. Carbon paste electrode has been fabricated and mixed with Gd doped and undoped TNT to form a nanocomposite working electrode. Comparison of bare carbon paste electrode and Gd doped and undoped TNT carbon paste electrode for 1.0 ×10⁻³ M K₄ [Fe(CN)₆] voltammetric analysis; it was observed that Gd doped TNT modified electrode has advantage of high sensitivity. Gd doped TNT modified electrode has been used as working electrode for itopride assay in a pharmaceutical formulation. Cyclic voltammetry analysis showed high correlation coefficient of 0.9973 for itopride (0.04–0.2 mg/mL) with a limit of detection (LOD) and limit of quantitation values (LOQ) of 2.9 and 23.0 μg.mL⁻¹ respectively.     

Voltammetric copper(II) determination with a montmorillonite-modified carbon paste electrode

The clay mineral montmorillonite has been tested as modifier for the carbon paste electrode with a novel electrode modification technique. The differential pulse voltammetric determination of copper(II) by means of this modified carbon paste electrode has been studied. A detection limit of 4x10(-8) mol/l has been achieved after 10 min preconcentration under open circuit conditions with subsequent anodic stripping voltammetry. The calibration curve for Cu(II) is linear in the range of 4x10(-8)-8x10(-7) mol/l. Pb interferes in a 10-fold molar and Cd and Hg in a 100-fold molar excess. The interference by humic ligands is significant.     

Voltammetric copper(II) determination with a montmorillonite-modified carbon paste electrode

The clay mineral montmorillonite has been tested as modifier for the carbon paste electrode with a novel electrode modification technique. The differential pulse voltammetric determination of copper(II) by means of this modified carbon paste electrode has been studied. A detection limit of 4×10^-8 mol/l has been achieved after 10 min preconcentration under open circuit conditions with subsequent anodic stripping voltammetry. The calibration curve for Cu(II) is linear in the range of 4×10^-8–8×10^-7 mol/l. Pb interferes in a 10-fold molar and Cd and Hg in a 100-fold molar excess. The interference by humic ligands is significant.     

Voltammetric determination of azithromycin at the carbon paste electrode

Azithromycin (AZ) is the first member of a class of macrolide azalides antibiotics called azolides. A simple and selective square-wave voltammetric (SWV) method has been developed for the determination of azithromycin in pure form, in pharmaceutical preparation and in biological samples. Determination of azithromycin was accomplished with hand-make carbon paste electrode (CPE) in oxidative screen mode. The counter and reference electrodes were a Pt wire and a Ag/AgCl, respectively. Various parameters that can influence the peak signal (effect of buffer, ionic strength, accumulation time, pH and the composition of the paste) have been scrutinized. The best results were obtained in acetonitrile—aqueous 1 M sodium acetate-acetic acid buffer (pH 4.6) containing 0.1 M KCl (1:9; v/v) using a 15% paraffin oil CPE. The limits of detection and quantification of the pure drug are 0.463 and 1.544 ppb (with the correlation coefficient, r=0.9785and the standard deviation, S.D.=0.1 (n=5), for the accumulation time of 60 s), respectively. The method was successfully applied to the determination of the drug in urine and two forms of pharmaceutical formulations. Recoveries were 99.2—100.5% with S.D.=0.1—and 0.8% (n=5).     

Voltamperometric determination of kinetin with a carbon paste modified electrode

The electrochemical behaviour of kinetin (6-furfurylaminopurine) on a carbon paste modified with OV-17 silicone electrode, is studied. The determination of kinetin is possible working in square wave voltammetric techniques, reaching limits of determination of 38.7 ng ml⁻¹. The proposed method was successfully applied to determine the cytokinin in extracts of apples (previously spiked with kinetin) and the obtained results were in accordance with the results obtained with HPLC-UV.     

Voltammetric determination of quercetin at a multi-walled carbon nanotubes paste electrode

Quercetin can effectively accumulate at multi-walled carbon nanotubes-paraffin oil paste electrodes (CNTPE) and cause a sensitive anodic peak at around 0.32 V (vs. SCE) in a 0.10 M phosphate buffer solution (pH = 4.0). Under optimized conditions, the anodic peak current is linear to quercetin concentration in the ranges of 2.0 × 10^− 9−1.0 × 10^− 7 M and 1.0 × 10^− 7−2.0 × 10^− 5 M, and the regression equations are i_p (μA) = 0.0017 + 0.928c (μM, r = 0.999) and i_p (μA) = 0.183 + 0.0731c (μM, r = 0.995), respectively. This paste electrode can be regenerated by repetitively cycling in a blank solution for about 2 min. A 1.0 × 10^− 6 M quercetin solution is measured for 10 times using the same electrode regenerated after every determination, and the relative standard deviation of the peak current is 1.7%. The method has been applied to the determination of quercetin in hydrolysate product of rutin and the recovery is 99.2–102.6%. In comparison with graphite paste electrode, carbon nanotubes-nujol paste electrode and carbon nanotubes casting film modified glassy carbon electrode, the CNTPE gives higher ratio of signal to background current and better defined voltammetric peak.     

Voltammetric determination of 2-nitrophenol at a bentonite-modified carbon paste electrode

A bentonite-modified carbon paste electrode has been applied to the determination of 2-nitrophenol by differential pulse voltammmetry. The electrochemical reduction of 2-nitrophenol at –0.8 V is carried out in an artificial sea water-formic acid/sodium formate medium at pH 4. The peak height was found to be dependent on the pH over the range 2–11; the presence of a secondary process was observed in the pH range 8–11. The peak potential showed a dependence on pH, with two linear regions with different slopes. A linear relationship between peak intensity and concentration was obtained in the range 0.07–10 mgl^–1, with a detection limit of 0.03 mg 1^–1 and a coefficient of variation of 1.3% at 5 mg 1^–1. The effects of organic and inorganic species on the 2-nitrophenol determination were studied with a view to testing the resolution of the voltammetric technique. The proposed method has been applied to sea water samples with good results.     

Voltammetric sensing of thallium at a carbon paste electrode modified with a crown ether

We describe a new method for differential-pulse anodic stripping voltammetric determination of thallium(I) using a carbon paste electrode modified with dicyclohexyl-18-crown-6. The effect of supporting electrolyte (type and pH), accumulation and reduction potential, and of time and amount of modifier were investigated by differential pulse anodic stripping voltammetry. A method was then worked out for the determination of thallium at low levels. Under optimized conditions, the response to Tl(I) is linear in the range from 3.0 to 250 ng mL^?1. The detection limit is 0.86 ng mL^?1. The sensor displays good repeatability (with a relative standard deviation of ±2.70 % for n?=?7) and was applied to the determination of Tl(I) in water, hair samples, and certified reference materials.

石墨烯修饰玻碳电极伏安法测定酪氨酸

制备了石墨烯修饰玻碳电极,研究了酪氨酸在修饰电极上的电化学行为.优化了包括支持电解质、溶液pH、修饰剂用量、富集电位及时间等测定条件.在0.1 mol·L-1pH 7.0的磷酸盐缓冲溶液中,峰电流与酪氨酸的浓度在3×10-6～1.2×10-4mol·L-1的范围内呈良好的线性关系,检出限为2 × 10-7 mol·L-...