Comprehensive study on the solvation of mono- and divalent metal cations: Li+, Na+, K+, Be2+, Mg2+ and Ca2+

Hydration of mono- and divalent metal ions (Li(+), Na(+), K(+), Be(2+), Mg(2+) and Ca(2+)) has been studied using the DFT (B3LYP), second-order M?ller-Plesset (MP2) and CCSD(T) perturbation theory as well as the G3 quantum chemical methods. Double-zeta and triple-zeta basis sets containing both (multiple) polarization and diffuse functions were applied. Total and sequential binding energies are evaluated for all metal-water clusters containing 1-6 water molecules. Total binding energies predicted at lower levels of theory are compared with those from the high level G3 calculations, whereas the sequential binding energies are compared with available experimental values. An increase in the quality of the basis set from double-zeta to triple-zeta has a significant effect on the sequential binding energies, irrespective of the geometries used. Within the same group (I or II), the sequential binding energy predictions at the MP2 and B3LYP vary appreciably. We noticed that, for each addition of a water molecule, the change of the M-O distance in metal-water clusters is higher at the B3LYP than at the MP2 level. The charge of the metal ion decreases monotonically as the number of water molecules increase in the complex.     

啤酒酵母生理代谢过程中钠、钾、镁、钙离子含量变化的跟踪检测

采用空气-乙炔火焰原子吸收光谱法分别测定了啤酒酵母发酵液中的Na^ 、K^ 、Mg^2 、Ca^2 离子动态变化中的含量,用La^3 盐消除P对Ca^3 的干扰,以Sr^2 盐作为Na^ 、K^ 的消电离剂。本实验室采用配制培养基,通过对不同种类及不同发酵阶段培养的发酵液样品进行测定,以研究在啤酒酵母生长代谢过程中Na^ 、K^ 、Mg^2 、Ca^2 离子代谢动态变化。方法的Na^ 、K^ 、Mg^2 、Ca^2 相对标准偏差(RSD)分别为0．31％,0．73％。1．78％,0．28％;样品加标回收率为98％-107％;检出限：Na^ 为0．159mg／L,K^ 为0．789nag／L,Mg^2 为0．039mg／L,Ca^2 为0．029mg／L。该方法简便快速,具有很好的精密度。     

Thermal investigations of nitrate-hydrates and deuterates of Ca2+, Cd2+ and Mg2+

DTA and DSC were used to study the thermal behaviour of Ca(NO₃)₂·4H₂O, Cd(NO₃)₂·4H₂O, Mg(NO₃)₂·6H₂O and their deuterated analogues. Evidence was found concerning the process of melting of the initial hydrates and deuterates, followed by a one-stage dehydration of the melt to vield the respective anhydrous salt. T _m, ΔH _m ^o , ΔS _m ^o and ΔH _deh ^o were determined and the ΔH _f ^o values for the investigated hydrates were calculated from the ΔH _deh ^o data.

---

Zusammenfassung DTA und DSC wurden zur Untersuchung des thermischen Verhaltens von Ca(NO₃)₂·4H₂O, Cd(NO₃)₂·4H₂O, Mg(NO₃)₂·6H₂O und ihrer deuterierten Analoge eingesetzt. Man fand Aussagen bezüglich des Schmelzvorganges der Ausgangshydrate und Deuterate, gefolgt von einer Einschritt-Dehydratation der Schmelze unter Bildung der entsprechenden wasserfreien Salze. T _m, ΔH _m ^o , ΔS _m ^o und ΔH _deh ^o wurden ermittelt und die ΔH _f ^o Werte für die untersuchten Hydrate wurden anhand der ΔH _deh ^o berechnet.

     

高锰酸钾-鲁米诺反应体系中碱土金属离子Mg2+,Ca2+,Sr2+,Ba2+化学发光行为研究

将被认为没有化学发光活性的第二主族(碱土金属)离子Mg^2 ,Ca^2 ,Sr^2 ,Ba^2 溶液注入到已充分反应的高锰酸钾与鲁米诺混合液中时,又发生了新的化学发光反应,并检测到强的化学发光信号．在对有关反应的动力学性质、化学发光光谱、紫外可见光谱及其它一系列实验研究的基础上,提出了可能的化学发光反应机理．同时,优化了反应条件,评价了这一反应用于Mg^2 ,Ca^2 ,Sr^2 ,Ba^2 分析的可行性．     

Properties of (Mg2 + Ca2+)-ATPase of erythrocyte membranes prepared by different procedures: influence of Mg2+, Ca2+, ATP, and protein activator.

Erythrocyte membranes prepared by three different procedures showed (Mg2+ + Ca2+)-ATPase activities differing in specific activity and in affinity for Ca2+. The (Mg2+ + Ca2+)-ATPase activity of the three preparations was stimulated to different extents by a Ca2+-dependent protein activator isolated from hemolysates. The Ca2+ affinity of the two most active preparations was decreased as the ATP concentration in the assay medium was increased. Lowering the ATP concentration from 2 mM to 2-200 microM or lowering the Mg:ATP ratio to less than one shifted the (Mg2+ + Ca2+)-ATPase activity in stepwise hemolysis membranes from mixed "high" and "low" affinity to a single high Ca2+ affinity. Membranes from which soluble proteins were extracted by EDTA (0.1 mM) in low ionic strength, or membranes prepared by the EDTA (1-10 mM) procedure, did not undergo the shift in the Ca2+ affinity with changes in ATP and MgCl2 concentrations. The EDTA-wash membranes were only weakly activated by the protein activator. It is suggested that the differences in properties of the (Mg2+ + Ca2+)-ATPase prepared by these three procedures reflect differences determined in part by the degree of association of the membrane with a soluble protein activator and changes in the state of the enzyme to a less activatable form.     

Theoretical study of interaction of 2,6-dithiopurine with Li+, Na+, K+, Be2+, Mg2+, and Ca2+ metal cations

The geometries of the complexes of Li⁺, Na⁺, K⁺, Be²⁺, Mg²⁺, and Ca²⁺ metal cations with different possible 2,6-dithiopurine anions (DTP) were studied. The complexes were optimized at the B3LYP level and the 6-311++G(d, p) basis set. The interactions of the metal cations at different nucleophilic sites of various possible 2,6-dithiopurine anions were considered. It was revealed that metal cations would interact with 2,6-dithiopurine anions in a bicoordinate manner. In the gas phase, the most preferred position for the interaction of Li⁺, Na⁺, and K⁺ cations is between the N₃ and S₂ sites, while all divalent cations Be²⁺, Mg²⁺, and Ca²⁺ prefer binding between the N₇ and S₆ sites of the corresponding 2,6-dithiopurine. The influence of aqueous solvent on the relative stability of different complexes has been examined using the Tomasi’s polarized continuum model. The basis set superposition error (BSSE) corrected interaction energy was also computed for complexes. The AIM theory has been applied to analyze the properties of the bond critical points (electron densities and their Laplacians) involved in the coordination between 2,6-dithiopurine anions and the metal cations. It was revealed that aqueous solution would have significant effect on the relative stability of complexes obtained by the interaction of 2,6-dithiopurine anions with Mg²⁺ and Ca²⁺ cations. The effect of metal cations on different NH and CS stretching vibrational modes of 2,6-dithiopurine has also been discussed.     

Correlated ab initio quantum chemical study of the interaction of the Na+, Mg2+, Ca2+, and Zn2+ ions with the tautomers of cytosine

The interaction of the metal ions Na(+), Mg(2+), Ca(2+), and Zn(2+) with cytosine have been reinvestigated at the density functional, M?ller-Plesset, and coupled cluster levels of theory, including hitherto unstudied tautomeric forms. It has been found that the interaction of the metal ion has a varying and often significant effect on the stabilities of the various tautomers, in some cases making most stable rare tautomeric forms. The results have been analyzed with respect to method and role of ion in binding, and confirm that, as has been found for the base cytosine tautomers, B3LYP does not give energetics consistent with highly accurate post-SCF methods for their interaction with these metal ions.     

Napthaquinone derived ionophores: interaction with biologically important metal ions (Li+, Na+, K+, Mg2+ and Ca2+)

The synthetic model systems based on the study of supramolecular compounds are proficient in mimicking the biological processes so as to get the insight of their processes. In this perspective, a series of naphthaquinone derived redox switchable ionophores namely D₁ (2,3,5,6,8,9,11,12-octahydronaphtho [2,3b] [1,4,7,10,13] pentaoxacyclo octadecine-14,19-dione) and D₂ (2,3,5,6,8,9-hexahydronaphtho[2,3-b] [1,4,7,10] tetraoxacyclododecine-11,16-dione) have been synthesized and interacted with Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺ cations. The isolated solid state soft materials obtained after interaction were characterized by melting point, TLC, ¹H NMR spectroscopy and CHN estimation. The extraction, transport potential and stability constant determination of these ionophores towards cations helped in investigating their binding strength in solution. The selective extraction of Na⁺ and Li⁺ by D₁ and D₂ correspondingly proves them an efficient compound for the manufacturing of chemosensor. Whereas efficient transport of Mg²⁺ by both the ionophores especially by D₁ may assist in developing biomodels for understanding its transport through membrane in living system. The selectivity of these ionophores towards metal ions can be modulated by molecular tailoring.     

Ionophoric properties of atropine: complexation and transport of Na+, K+, Mg2+ and Ca2+ ions across a liquid membrane

The activity of atropine on the complexation and transport of Na(+), K(+), Mg(2+) and Ca(2+) ions across a liquid membrane was investigated using a spectrophotometric method. Atropine is a natural drug that blocks muscarinic receptors. It is a competitive antagonist of the action of acetylcholine and other muscarinic agonists. Atropine is shown to extract Na(+), K(+), Mg(2+) and Ca(2+) ions from an aqueous phase into an organic one with a preference for Ca(2+) ions. According to a kinetic study, divalent cations (Mg(2+) and Ca(2+)) are more rapidly transported than monovalent ones (Na(+) and K(+)). In both complexation and transport, the flux of the ions increases with the increase of atropine concentration. Atropine might act on the membrane permeability; its complexation and ionophoric properties shed new lights on its therapeutic properties.     

Studies on the Synthesis of bis(Benzo diaza 23-crown-7) and its Complexes with K+, Mg2+, Ca2+ and Ba2+ Perchlorates

A novel (E,E)-dioxime (H2L) containing a 23-membered macrocyclic ionophore was synthesized from the reaction of 2,3-(4-aminobenzo)-1,4,11,14,17-pentaoxa-6,22-dioxo-7,21-diaza-cyclotricosane-2-ene (5) prepared from 2,3-(4-nitrobenzo)-1,4,11,14,17-pentaoxa-6,22-dioxo-7,21-diazacyclotricosane-2-ene (4) and cyanogen di-N-oxide (6). H2L encapsulates and coordinates to alkaline earth metal cations via the oxygen atom to form complexes, H2L2MX (M = K+, Mg2+, Ca2+ and Ba2+; X = ClO4-). After the complexation with alkaline earth metal cations, 1H-NMR, 13C-NMR and IR data were obtained and a comparison of these spectral data is presented.     

Al3+, Ca2+, Mg2+, and Li+ in aqueous solution: calculated first-shell anharmonic OH vibrations at 300 K

The anharmonic OH stretching vibrational frequencies, ν(OH), for the first-shell water molecules around the Li(+), Ca(2+), Mg(2+), and Al(3+) ions in dilute aqueous solutions have been calculated based on classical molecular dynamics (MD) simulations and quantum-mechanical (QM) calculations. For Li(+)(aq), Ca(2+)(aq), Mg(2+)(aq), and Al(3+)(aq), our calculated IR frequency shifts, Δν(OH), with respect to the gas-phase water frequency, are about -300, -350, -450, and -750?cm(-1), compared to -290, -290, -420, and -830?cm(-1) from experimental infrared (IR) studies. The agreement is thus quite good, except for the order between Li(+) and Ca(2+). Given that the polarizing field from the Ca(2+) ion ought to be larger than that from Li(+)(aq), our calculated result seems reasonable. Also the absolute OH frequencies agree well with experiment. The method we used is a sequential four-step procedure: QM(electronic) to make a force field+MD simulation+QM(electronic) for point-charge-embedded M(n+) (H(2)O)(y) (second?shell) (H(2)O)(z) (third?shell) clusters+QM(vibrational) to yield the OH spectrum. The many-body Ca(2+)-water force-field presented in this paper is new. IR intensity-weighting of the density-of-states frequency distributions was carried out by means of the squared dipole moment derivatives.     

Ion-selective electrode for measuring low Ca2+ concentrations in the presence of high K+, Na+ and Mg2+ background

In this work, ion-selective electrodes for calcium ion were investigated. Two ionophores were used in the membranes: ETH 1001 and ETH 129. An internal filling solution buffered for primary ion was used that allowed the lower detection limit to be decreased down to 10^−8.8 M. Theoretical and experimental electrode characteristics pertaining to both primary and interfering ions are discussed. Better behavior was obtained with the electrode prepared with ETH 129 in the membrane. This electrode would be the most likely candidate for obtaining a low Ca²⁺ detection limit in measurements performed with high K⁺, Na⁺, Mg²⁺ background, which is found inside the cells of living organisms, for example. The potentiometric response of the electrode in solutions containing main and interfering ions is in good agreement with simulated curves obtained using the Nernst–Planck–Poisson (NPP) model.     

Studies on Synthetic Inorganic Ion Exchangers-III Quantitative Separations of Mg2+ -Pb2+, Zn2+ - Pb2+ Cu2+ - Pb2+, Al3+ - Pb2+, Zn2+ - Cd2+, and Mg2+ - Cd2+ on Lead Antimonate Columns

Abstract

A new inorganic ion exchanger, lead antimonate has been synthesized having an Pb:Sb ratio of 1:5 and cation exchange capacity of 1.46 mequiv./g. It is fairly stable in water and dilute solutions of acids, bases and salts. Ion distribution studies on twenty metal ions have been determined on this gel at pH 1,2,3 and 5. The following mixtures have been separated: Mg²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Zn²⁺ - Pb²⁺, Cu²⁺ - Pb²⁺, Al³⁺ - Pb²⁺, Zn²⁺ - Cd²⁺ and Mg²⁺ - Cd²⁺. Mg²⁺ and Al³⁺ were removed with 0.4 M ammonium nitrate, Cu²⁺ and Zn²⁺ with 0.4 M ammonium nitrate + 0.1M nitric acid (1:1), Pb²⁺ with 0.5M nitric acid and Cd²⁺ with 0.25M nitric acid. A tentative structure of this material is proposed on the basis of chemical analysis, pH titrations, thermogravimetry and IR spectrophotometry.     

Modulation of the metal recognition properties of a new type of azaferrocenophane-based chemosensors: co-ordination chemistry towards Mg2+, Ca2+, Zn2+ and Ni2+

The structure-redox chemistry relationship of a new type of azaferrocenophane-based chemosensors, 3 and 4, in the presence of protons and several kinds of metal ions, has been studied. Electrochemical studies, carried out in CH2Cl2, in the presence of increasing amounts of Mg2+, Ca2+, Zn2+ and Ni2+ showed that the wave corresponding to the Fc/Fc+ couple of the uncomplexed ligands is gradually replaced by a new reversible wave at more positive potentials corresponding to the Fc/Fc+ couple of the complexed ligands. The maximum shift of the ferrocene oxidation wave was found for 4b in the presence of Mg2+, whereas for 3f a selective sensing response for Mg2+ in the presence of hydrated Ca2+ cations was observed, with a concomitant highly visual output response consisting of a deep purple colour.     

Understanding the inactivation process of organophosphorus herbicides: A DFT study of glyphosate metallic complexes with Zn2+, Ca2+, Mg2+, Cu2+, Co3+, Fe3+, Cr3+, and Al3+

Glyphosate is the active component of one of the top‐selling herbicides, which is also a potent EPSP synthase inhibitor. The herbicide is absorbed by living tissue and translocated via the phloem, to plant roots and rhizomes. When applied directly into the soil it has low activity, due to the high adsorption by soil constituents. Understanding the specific interactions between metals in the soil and glyphosate is the main step in understanding the low activity of the herbicide when applied directly into the ground and not pulverized. We can observe there is a stability order for both tetrahedral and octahedral complexes between glyphosate and metals: Zn>Cu>Co>Fe>Cr>Al>Ca>Mg. © 2012 Wiley Periodicals, Inc.     

Transport of Ca2+, Sr2+, Ba2+, Na+, K+ and Cs+ through hollow fiber supported liquid membrane

The transport of metal ions (Ca²⁺, Sr²⁺, Ba²⁺, Na⁺, K⁺, Cs⁺) through hollow fiber supported dichlorobenzene liquid membrane has been studied. The transport of cations using 8-crown-6 ether as a carrier and picrate as co-counter ion as well as a pertraction device and capillary isotachophoresis (ITP) measurement of the cation concentration is described.