Model for the analytical signal in atomic absorption spectrometry with electrothermal atomization

A method for verification of analytical measurements in electrothermal atomic absorption spectrometry using a phenomenological model for physicochemical atomization processes is discussed. The influence of the sample matrix on basic kinetic parameters of atomization such as the analyte free-atom formation energy and the atomization rate constant has been shown. The similarity of atomization kinetic parameters obtained by calibrating the spectrometer to those for samples under study can be used as a verification criterion for analysis. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 75, No. 3, pp. 295–298, May–June, 2008.     

固相萃取-钨丝电热原子吸收光谱分析法测定水样中的银

建立了基于固相萃取和便携式钨丝电热原子吸收光谱仪的测定环境水样中痕量银的新方法.样品流经以硅胶作为吸附剂的固相萃取小柱,银离子被吸附于柱上,用硫脲和硝酸混合液将其洗脱,洗脱液用便携式钨丝电热原子吸收光谱仪进行检测.考察了各种实验参数及共存离子对测定的干扰情况,最终选择样品pH值为6.0、流速为4.0 mL·min-1;...     

Application of experimental design for optimization of erbium determination by high-resolution continuum source electrothermal atomic absorption spectrometry using lanthanum as a chemical modifier

ABSTRACT

In this paper, lanthanum was used as a chemical modifier for the direct determination of erbium by high-resolution continuum source electrothermal atomic absorption spectrometry. A two-step experimental design was used for optimization, first a full factorial design was conducted for identification of significant factors, and then a central composite design was carried out for final optimization of the significant factors. The optimum parameters were obtained as follows: atomization temperature of 2500°C, pyrolysis temperature of 1600°C, and pyrolysis time of 10?s in the presence of lanthanum as a chemical modifier. Under optimum conditions, the characteristic mass, limit of detection, and limit of quantification were 29?pg, 0.71, and 2.4?µg?L^?1, respectively. The precision of the method, estimated as the relative standard deviation for 10 replicate measurements of 50?µg?L^?1 of erbium, was 1.8%. The optimized method was applied to determine erbium content in sediments and rock samples. The determined values of erbium in sediment certified reference materials were in satisfactory agreement with the certified values according to the t-test for a 95% confidence level.     

微波萃取-原子荧光光谱法优化测定海鸟生物粪中的甲基汞

建立了微波萃取-原子荧光光谱法测定海鸟生物粪中的甲基汞测量方法.优化了显著影响微波萃取甲基汞的两个因素:萃取温度和盐酸用量.最终确定了 120℃和200μL 6 mol·L-1盐酸介质为最佳萃取条件.此条件下测定的生物标准参考物质人发粉的相对标准偏差为0.74%,回收率大于90%,测定的海鸟生物粪样品相对标准偏差为6....     

甲基异丁酮萃取-原子荧光光谱法间接测定碘

在硝酸浓度为0.1mol.L-1介质中,I-和Hg2+能生成稳定的化合物,被甲基异丁酮萃取,原子荧光光谱法测定有机相中的汞,间接得到碘的含量。工作考察了萃取条件以及其他影响因素。在优化的实验条件下,碘的含量在0～12μg.L-1范围内呈良好的线性关系,方法的检出限是0.14μg.L-1,相对标准偏差3.3%,对蛋类样品加标回收率为101.8%～110.4%。     

Critical parameters for the analysis of anionic oligosaccharides by desorption electrospray ionization mass spectrometry

Sulfated oligosaccharides derived from glycosaminoglycans (GAGs) are fragile compounds, highly polar and anionic. We report here on the rare but successful application of desorption electrospray ionization (DESI) - LTQ-Orbitrap mass spectrometry (MS) to the high-resolution analysis of anionic and sulfated oligosaccharides derived from the GAGs hyaluronic acid and heparin. For that purpose, key parameters affecting DESI performance, comprising the geometric parameters of the DESI source, the probed surface and the spraying conditions, applied spray voltage, flow rates and solvent composition were investigated. Under suitable conditions, the DESI technique allows the preservation of the structural integrity of such fragile compounds. DESI enabled the sensitive detection of anionic hyaluronic acid and heparin oligosaccharides with a limit of detection (LOD) down to 5 fmol (≈10?pg) for the hyaluronic acid decasaccharide. Detection of hyaluronic acid oligosaccharides in urine sample was also successfully achieved with LOD values inferior to the ng range. Multistage tandem mass spectrometry (MS(n) ) through the combination of the DESI source with a hybrid linear ion trap-orbitrap mass spectrometer allowed the discrimination of isomeric sulfated oligosaccharides and the sequence determination of a hyaluronic acid decasaccharide. These results open promising ways in glycomic and glycobiology fields where structure-activity relationships of bioactive carbohydrates are currently questioned. Copyright ? 2012 John Wiley & Sons, Ltd.     

Improved atomic data for iridium atom (Ir I) and ion (Ir II) and the solar content of iridium

From a combination of radiative lifetime measurements, performed with a time-resolved laser-induced fluorescence technique, for nine odd-parity levels of Ir I and four odd-parity levels of Ir II and branching fraction calculations, extended sets of transition probabilities have been derived for transitions of astrophysical interest. The new results are compared with the few experimental data available in the literature and a good agreement is found. They extend considerably the previous sets of transition probabilities available in the literature. Implications of the new results regarding the solar content of iridium are briefly discussed.     

Green and novel ultrasonic extraction with UHPLC-MSMS analysis of natural sweetener (Glycyrrhizic acid) from Glycyrrhiza glabra; a multifactorial mechanistic evaluation based on statistical analysis

A novel, green and eco-friendly, cost-effective, fast, and reliable high energy ultrasonication (US) extraction with UHPLC-MSMS (Ultrahigh performance liquid chromatography with mass spectrometry) quantification of Glycyrrhizic acid (GZA) is reported herein for the first time. The study provides useful insights regarding the effect of US-factors with statistical analysis and mechanisms, involved in GZA-extraction and analysis. An US-extraction method (US-MD) was developed using three levels of US factors: solvents (AC (acetone), EtOH (ethanol), H₂O (water)), time (1, 2, 3 min), amplitudes (30, 40, 50%), pulse (10/0.5, 20/0.5, 30/0.5 sec), particle sizes (0.5, 1, 1.4 mm), and temperatures (20, 30, 40 °C). The US-MD was further validated with high accuracy 98.96 ± 6.82 and r² = 0.995 whereas, an in-house analytical method (UHPLC-MSMS) was developed and validated to quantify the GZAamount. UHPLCMSMS-MD resulted in a retention time of 0.31 min with MSMS (821.400 > 351.200) in a 1 min run time whereas, UHPLCMSMS-MV showed high accuracy and precision with r² = 0.998 for GZA. Statistical analysis of K-mean clustering finalized US-set-of-factors showing optimum extract yield (mg/1mg) of 0.48 with sum (2.41 ± 014) and mean (0.27) along with a high GZA-amount (μg/mg) of 8.23 with sum (43.31 ± 2.07) and mean (4.81) for H₂O in 3 min at 40 °C using particle size (1.4 mm), amplitude (50%), and pulse (30/0.5). Large scale application of US-UHPLCMSMS confirmed the evaluation power of the method showing the order for GZA amount; Egypt > Pakistan > Syria > India > Palestine > America > Georgia > Morocco. A significant effect for US factors Vs extract yield and GZA amount was observed however, solvent*GZA-amount and extract yield*particle size were more significantly correlated compared to time*temperature*amplitude*pulse analyzed via PCA, GLM-UniANOVA, K-mean, and Pearson’s correlation (P ≤ 0.05). A combined mechanism of shear stress, macroturbulence due to acoustic cavitation and implosions, sonochemical, and sonocapillary effect were noted for the US technique producing higher extract yield and GZA amount from licorice.     

Evidence for subsurface atomic displacements of the GaAs(110) surface from LEED/CMTA analysis

The low-energy electron diffraction constant momentum transfer average (LEED/CMTA) technique is applied to the GaAs(110) surface. In addition to verifying our earlier model of the top layer atomic displacements, atomic displacements in the first subsurface layer, opposite in direction to those in the top layer, are suggested. Best estimates for atomic positions in the surface and first subsurface layers are given.     

Empirical evaluation of metal deposition for the analysis of organic compounds with static secondary ion mass spectrometry (S-SIMS)

Metal-assisted (MetA) SIMS using the deposition of a thin Au or Ag layer on non-conducting samples prior to analysis has been advocated as a means to improve the secondary ion (S.I.) yields of organic analytes. This study focuses on the influence of time and temperature on the yield enhancement in MetA-SIMS using thick layers of poly(vinylbutyral-co-vinylalcohol-co-vinylacetate) (PVB) containing dihydroxybenzophenone (DHBPh) or a cationic carbocyanine dye (CBC) and spin-coated layers of the cationic dye on Si. Pristine samples as well as Au- and Ag-coated ones were kept between −8 °C and 80 °C and analysed with S-SIMS at intervals of a few days over a period of 1 month. The yield enhancement was found to depend strongly on the kind of evaporated metal, the storage temperature and time between coating and analysis.     

Evidence for preferential reactivity of the atomic oxygen with hydrogenated diamond (111) facets

Chemical bonding configuration of the adsorbed oxygen on diamond polycrystalline hydrogenated surface was investigated by high resolution electron energy loss spectroscopy (HR-EELS). Hot filament chemical vapor deposited diamond films with sub-micron grain size have been exposed in-situ to thermally activated atomic oxygen (AO) and annealed in ultra-high vacuum in the range of 600–900 °C. HR-EELS features comparison of as-deposited and AO exposed diamond surface as a function of thermal annealing suggests that AO preferentially adsorbs on hydrogenated (111) facets keeping hydrogenated (100) ones intact.     

Structure analysis of the KBr(100) surface An investigation with a new method for surface analysis of insulators

The surface structure of highly insulating KBr(100) was investigated by a new technique, impact collision atom scattering spectroscopy with detection of neutrals (NICASS). By using neutral atoms in the scattering experiment as projectiles [different from conventional ion scattering (ISS)], uncertainties in the experimental data due to surface charging effects are avoided. As a result, a surface structure model for KBr(100) is presented. By comparing the experimental scattering information with computer simulated data, an inward relaxation in the first layer has been deduced. The relaxation is different for the two components K and Br: K is shifted by 0.5 Å and Br by 0.3 Å, resulting in a surface rumpling of 0.2 Å.     

Inductively coupled plasma—atomic emission spectrometry (ICP-AES): an analytical technique for the chemical characterization of perovskite ceramic semiconductors

The possibilities of inductively coupled plasma-atomic emission spectrometry (ICP-AES) for the chemical characterization (dopants, impurities, and macroconstituents) of perovskite ceramic semiconductors (PTC thermistors, varistors, manganites, cobaltites) are shown. The dissolution of the samples is achieved by five methods: (a) decomposition with HCl in a Teflon-lined pressure vessel, (b) decomposition with HF + H₂SO₄ in a Teflon-lined pressure vessel, (c) decomposition with (NH₄)₂SO₄ + H₂SO₄ in a platinum dish, (d) fusion with Na₂CO₃ + Na₂B₄O₇ in a platinum crucible, (e) fusion with Li₂B₄O₇ in a graphite crucible. The spectral interferences and the inter-element effects are studied and corrected. The detection limits are comprised, approximately, between 0.00001% and 0.1%. High sensitivity and good precision are attained.     

Coverage-dependent absorption of atomic hydrogen into the sub-surface of Cu(1 1 1) studied by density-functional-theory calculations

With density-functional-theory calculations, we have studied coverage-dependent absorption of H atoms into the sub-surface below a face-centered-cubic (fcc) hollow site of Cu(1 1 1). Both frozen and relaxed surface lattices were considered when the atomic H migrated from the surface to the sub-surface. The potential energy curve for the absorbing H shows that the surface site is in general favored over the sub-surface site, and this trend varies little with the H coverage (0.11-0.67 ML). If the hexagonal-close-packed (hcp) hollow sites immediately vicinal to the absorbing H are pre-adsorbed with other H atoms, the surface adsorption potential is greatly increased, because of the repulsive H-H interaction, to a value near, or even greater than, the sub-surface absorption potential; when two or three H atoms (on the hcp sites) are beside the absorbing H, the energy barrier for the sub-surface absorption is decreased, whereas that for diffusion from the sub-surface to the surface is enhanced. These results indicate that, on an H-saturated Cu(1 1 1) surface (0.67 ML), the sub-surface sites below the fcc sites with two or three neighboring H atoms can trap the sub-surface H.     

An overview of research using the one atmosphere uniform glowdischarge plasma (OAUGDP) for sterilization of surfaces and materials

The medical, food processing, and heating, ventilating, and air conditioning industries are searching for improved pasteurization, disinfection, and sterilization technologies. Candidate techniques must deal with and overcome such problems as thermal sensitivity and destruction by heat, formation of toxic by-products, costs, and inefficiency in performance. We report the results of a plasma source, the One Atmosphere Uniform Glow Discharge Plasma (OAUGDP), which operates at atmospheric pressure in air and produces antimicrobial active species at room temperature, OAUGDP exposures have reduced log numbers of Gram negative and Gram positive bacteria, bacterial endospores, yeast, and bacterial viruses on a variety of surfaces. The nature of the surface influenced the degree of lethality, with microorganisms on polypropylene being most sensitive, followed by glass, and cells embedded in agar. Experimental results showed at least a 5 log ₁₀ CFU reduction in bacteria within a range of 50-90 s of exposure. After 10-25 s of exposure, macromolecular leakage and bacterial fragmentation were observed. Vulnerability of cell membranes to reactive oxygen species (ROC) is hypothesized. Results from several novel OAUGDP configurations are presented, including a remote exposure reactor (RER) which uses transported active species to sterilize material located more than 20 cm from the plasma generation site, and a second planar electrode configuration developed for air filter sterilization. Applications of these technologies to the healthcare industry, the food industry, and decontaminating surfaces compromised by biological warfare agents are discussed