Ratiometric fluorescence chemosensors for copper(II) and mercury(II) based on FRET systems

A system based on FRET mechanism, comprising a coumarin donor and a rhodamine acceptor, was developed for the selective and quantitative detection of metal ions. Fluorescent chemosensors RCs, linked by 1,2-diethylamine, exhibit significant fluorescence enhancement and excellent selectivity toward Cu²⁺. Fluorescent probes CRB and CR6G, linked by hydrazide, function as ratiometric receptors for Cu²⁺ chromogentically and fluorogentically in organic-aqueous media. Furthermore, the characteristic rhodamine-based fluorescence response of CRB (excitation at 550 nm) exhibits high selectivity for Hg(II). The construction of this kind of universal FRET system opens a broader prospect for future design of ratiometric fluorescent probes.     

Ratiometric fluorescent and colorimetric sensors for Cu based on 4,5-disubstituted-1,8-naphthalimide and sensing cyanide via Cu displacement approach

Two 4,5-disubstituted-1,8-naphthalimide derivatives 1 and 2 were synthesized as ratiometric fluorescent and colorimetric sensors for Cu²⁺, respectively. In 100% aqueous solutions of 1, the presence of Cu²⁺ induces a strong and increasing fluorescent emission centered at 478 nm at the expense of the fluorescent emission of 1 centered at 534 nm. Compound 2 senses Cu²⁺ by means of a colorimetric (primrose yellow to pink) method with a thorough quench in emission attributed to the deprotonation of the secondary amine conjugated to the naphthalimide fluorophore. 1-Cu²⁺ and 2-Cu²⁺ sense cyanide in ratiometric way via colorimetric and fluorescent changes.     

An efficient sensor for relay recognition of Zn and Cu through fluorescence ‘off–on–off’ functionality

A new bis(8-carboxamidoquinoline) dangled binaphthol derivatized fluorescent sensor (L) was designed and synthesized. L behaves ratiometric response to Zn²⁺ with high selectivity accompanied by remarkable emission enhancement and red shift. The resultant L–Zn²⁺ complex can act as a Cu²⁺ sensing probe with fluorescence quenching behavior through direct Zn²⁺ ion replacement. Furthermore, the binding modes of Zn²⁺ and Cu²⁺ with L are elucidated by X-ray crystallographic analysis, respectively.     

Fluorogenic dual click derived bis-glycoconjugated triazolocoumarins for selective recognition of Cu(II) ion

Carbohydrate based fluorescent sensors S1 and S2 have been developed by fluorogenic dual click chemistry and are characterized by various spectroscopic techniques. Both the fluorescent probes displayed highly selective detection of Cu²⁺ ions by means of fluorescence quenching. The job plot experiment suggested 1:1 complexation of probes S1 and S2 with Cu²⁺ ions having detection limit of 6.99 μM and 7.30 μM, respectively. The binding constants for S1-Cu²⁺ and S2-Cu²⁺ complexation were evaluated to be 3.34 × 10³ M⁻¹ and 5.93 × 10³ M⁻¹, respectively.     

FRET-derived ratiometric fluorescence sensor for Cu

New N-(pyrenylmethyl)naphtho-azacrown-5 (1) was synthesized as an ‘On-Off’ fluorescent chemosensor for Cu²⁺. Excited at 240 nm corresponding to the absorption of naphthalene unit (energy donor) of 1, emission at 380 nm from pyrene unit (energy acceptor) is observed, indicating that intramolecular fluorescence resonance energy transfer (FRET-On) occurs in 1. When Cu²⁺ is added to a solution of 1, however, the fluorescence of pyrene is strongly quenched (FRET-Off) whereas that of naphthalene group is revived. Such FRET ‘On-Off’ behavior of 1 is observed only in the case of Cu²⁺ binding, but not for other metal cations. The high selectivity of 1 toward Cu²⁺ can be potentially applied to a new kind of FRET-based chemosensor. The FRET On-Off behavior is supported by computational studies. The calculated molecular orbitals of HOMO and LUMOs suggest the excited-state interactions leading to FRET from naphthalene to pyrene in 1, but no electron density changes in 1·Cu²⁺ complex.     

Turn-on fluorescence sensor based on the aggregation of pyrazolo[3,4-b]pyridine-based coumarin chromophores induced by Hg

We developed a new fluorescent sensor (PPC-S) for Hg²⁺ based on the aggregation-induced emission (AIE) of pyrazolo[3,4-b]pyridine-based coumarin chromophore (PPC-O). Given the desulfurization reaction with Hg²⁺, AIE inactive PPC-S can be transformed into PPC-O with AIE activity, which can be employed for the fluorescence turn-on detection of Hg²⁺ with satisfactory selectivity and sensitivity in aqueous solutions.     

Synthesis and photophysical properties of water-soluble sulfonato-Salen-type Schiff bases and their applications of fluorescence sensors for Cu in water and living cells

A series of water-soluble sulfonato-Salen-type ligands derived from different diamines including 1,2-ethylenediamine (Et-1–Et-4), 1,2-cyclohexanediamine (Cy-1 and Cy-2), 1,2-phenylenediamine (Ph-1–Ph-3 and PhMe-1–PhMe-4), and dicyano-1,2-ethenediamine (CN-1) has been designed and prepared. Sulfonate groups of ligands ensure good stability and solubility in water without affecting their excited state properties. These ligands exhibit strong UV/Vis-absorption and blue, green, or orange fluorescence. Time-dependent-density functional theory calculations have been undertaken to reveal the influence of ligand nature, especially sulfonate groups, on the frontier molecular orbitals. Since their fluorescence is selectively quenched by Cu²⁺, the sulfonato-Salen-type ligands can be used as highly selective and sensitive turn-off fluorescence sensors for the detection of Cu²⁺ in water and fluorescence imaging in living cells.     

A reversible fluorescent–colorimetric Schiff base sensor for Hg ion

A simple (R)-(−)-2-phenylglycinol functionalized Schiff base L1 and its characterization as a fluorescent–colorimetric sensor for Hg²⁺ ion are described. The UV–vis and fluorescence analysis in methanol and aqueous solution show complex formation between L1 and Hg²⁺ ion with a micromolar association constant. Competition experiments performed for the acetate salts of Hg²⁺, Zn²⁺, Co²⁺, Pb²⁺, Cd²⁺, Mn²⁺, Cu²⁺, Ni²⁺, and Ba²⁺ revealed that compound L1 exhibits high selectivity toward Hg²⁺ displaying a color change easily detectable by naked-eye and a turn-off fluorescent effect due to a chelation-enhanced quenching (CHEQ) mechanism. Moreover, addition of EDTA to L1–Hg²⁺ recovers the fluorescence and color offering receptor L1 as a reversible sensor for real-time applications.     

Solvent-dependent chromogenic sensing for Cu and fluorogenic sensing for Zn and Al: a multifunctional chemosensor with dual-mode

A new multifunctional chemosensor 1 was synthesized and characterized by spectroscopic tools along with a single crystal X-ray crystallography. It can exhibit selective recognition responses toward Cu²⁺, Zn²⁺ and Al³⁺ in different solvent systems with bimodal methods (colorimetric and fluorescence). This sensor 1 detected Cu²⁺ ions through a distinct color change from colorless to yellow in aqueous solution. Interestingly, the receptor 1 was found to be reversible by EDTA. The detection limit (11 μM) of 1 for Cu²⁺ is much lower than WHO guideline (30 μM) in drinking water. In addition, the sensor 1 showed significant fluorescence enhancements in the presence of Zn²⁺ ion and Al³⁺ ion in two different organic solvents (DMF and MeCN), respectively. The binding modes of the three complexes were determined to be a 1:1 complexation stoichiometry through Job plot, ESI-mass spectrometry analysis, and ¹H NMR titration.     

Microwave-assisted synthesis of 3-hydroxy-4-pyridinone/naphthalene conjugates. Structural characterization and selection of a fluorescent ion sensor

Two novel 3-hydroxy-4-pyridinone/naphthalene conjugates (L1 and L2) with different distances between the chelating and the fluorescent moieties were synthesized using conventional heating and microwave irradiation achieving a shorter reaction time. The structure of both compounds was confirmed by X-ray crystallography, revealing that these compounds were isolated as hydrochloride salts in dihydroxypyridinium forms. In solution and in the presence of a base, the tautomeric keto forms may be obtained as it was elucidated by NMR analysis. The dihydroxypyridinium form of L1 exhibits fluorescence at 450 nm, both in ACN and DMSO, whereas the corresponding keto form exhibits fluorescence at 365 nm. In contrast, the dihydroxypyridinium form of L2 only fluoresces in DMSO, exhibiting a band at 340 nm, while the keto form is non-fluorescent. These distinct fluorescent behaviors reveal that the tautomeric form in which the ligands are isolated and the distance between the chelating and fluorescent functions strongly influences their fluorescence properties. Ligand L1 exhibits better fluorescence properties and its fluorescence intensity is quenched in the presence of variable concentration of Cu²⁺, Zn²⁺, and Fe³⁺, thus making it suitable to be used as ion sensor.     

Highly selective fluorescent sensing of Cu ion by an arylisoxazole modified calix[4]arene

A novel fluorescent chemosensor 1 with two anthraceneisoxazolymethyl groups at the lower rim of calix[4]arene has been synthesized, which revealed a dual emission (monomer and excimer) when excited at 375 nm. This chemosensor displayed a selective fluorescence quenching only with Cu²⁺ ion over all other metal ions examined. When Cu²⁺ ion was bound to 1, the fluorescence intensities of both monomer and excimer were quenched. Furthermore, the association constant for the 1:1 complex of 1·Cu²⁺ was determined to be (1.58 ± 0.03) × 10⁴ M⁻¹.     

Zinc selective chemosensor based on pyridyl-amide fluorescence

Chemosensors are developed to image zinc ions. Fluorescence enhancement due to Zn²⁺ binding is an excellent way to detect its presence. A chemosensor for Zn²⁺ based on dipicolylamine (DPA) groups connected by a pyridyl amide backbone has been synthesized. Addition of 2-chloroacetyl chloride to 2,6-diaminopyridine affords 2,6-bis(chloroethylamido)pyridine, which is converted to the sensor BADPA-P by 2,2′-dipicolylamine displacement of chlorine. This compound along with two others, the mono-DPA, ADPA-P and the benzyl in place of pyridyl, BADPA-B, present three potential Zn²⁺ sensors. It was found that BADPA-P in the presence of Zn²⁺ shows a large increase in fluorescence, whether in polar organic or aqueous environments. Its fluorescence in the presence of Cd²⁺, unlike with Zn²⁺, is not enhanced when excited at longer wavelengths. Proton NMR measurements, indicate two Zn²⁺ ions bind to BADPA-P. Also, Zn²⁺ enhances fluorescence even when other metal ions are present.     

New cavitand derivatives bearing four coumarin groups as fluorescent chemosensors for Cu and recognition of dicarboxylates utilizing Cu complex

New cavitand derivatives (1, 2) bearing four coumarin groups were synthesized, and the binding properties of these cavitands towards metal ions were examined through their fluorescent changes. Cavitand 1 effectively recognized the Cu²⁺ ions among the metal ions examined. The recognition of cavitand 1-Cu²⁺ with dicarboxlyates is also described.     

A colorimetric and fluorescent sensor for sequential detection of copper ion and cyanide

A simple cation sensor 1 ((E)-9-((2-hydroxynaphthalen-1-ylimino)methyl)-1,2,3,5,6,7-hexahydropyrido[3,2,1-ij]quinolin-8-ol) bearing both a julolidine moiety and a naphthol moiety was designed and synthesized as a colorimetric sensor for Cu²⁺. In methanol solution of 1, the presence of Cu²⁺ led to a distinct naked-eye color change from yellow to purple. The proposed sensing mechanism might be attributed to the decrease in internal charge transfer band. Moreover, the resulting 1–Cu²⁺ complex sensed cyanide in a fluorometric way via fluorescent changes. These results demonstrate a novel type of the sequential recognition of Cu²⁺ and CN⁻ using two different sensing methods, color change, and fluorescence.     

Colorimetric and fluorescence sensing of anions using thiourea based coumarin receptors

Thiourea-containing coumarins 1, 2 have been designed and synthesized via reaction of 6-aminomethylcoumarin and the corresponding isothiocyanates. Their anion-binding ability has been examined using UV-vis, fluorescence and ¹H NMR. The anion recognition takes place through charge neutral thiourea receptor sites with concomitant fluorescence quenching of the coumarin moiety with 1 showing a strong binding to C₆H₅COO⁻ over F⁻ with a distinct change in color.     

Squaraine-based colorimetric and fluorescent sensors for Cu-specific detection and fluorescence imaging in living cells

New squaraine-based chemosensors SQ1 and SQ2 functionalized with 2-picolyl units were first synthesized and used as highly selective and sensitive colorimetric and fluorometric dual-channel sensors for Cu²⁺-specific recognition in aqueous systems. Among a series of individual metal ions, only Cu²⁺ could result in dramatic color changes. We also evaluated their capability of biological applications and found that SQ2 could be successfully employed as a Cu²⁺-selective probe in the fluorescence imaging of living cells.     

A rigid conjugated pyridinylthiazole derivative and its nanoparticles for divalent copper fluorescent sensing in aqueous media

A rigid conjugated pyridinylthiazole derivative (1) and two bithiazole derivatives with similar structures (2, 3) were synthesized and characterized. Their optical properties were investigated through spectral analysis. By applying the three compounds to Cu²⁺ ions detection, it was shown that compound 1 could be employed as a selective and sensitive Cu²⁺ ions fluorescent chemosensor. For aqueous assay, the nanoparticles of compound 1 were prepared in aqueous media. Compared to the monomer, 1 nanoparticles were more fluorescence sensitive to Cu²⁺ ions. Its binding mode with Cu²⁺ ions was correlated well with Langmuir equation. Compound 1 nanoparticles exhibit a dynamic working range for Cu²⁺ ions from 0.02 to 0.50 μM with a detection limit of 10 nM. The proposed chemosensor has been used for the direct measurement of Cu²⁺ content in drinking water samples with satisfying results.     

Three different fluorescent responses to transition metal ions using receptors based on 1,2-bis- and 1,2,4,5-tetrakis-(8-hydroxyquinolinoxymethyl)benzene

The dipod 1,2-bis(8-hydroxyquinolinoxymethyl)benzene (3) and tetrapod 1,2,4,5-tetrakis(8-hydroxyquinolinoxymethyl)benzene (5) have been synthesized through nucleophilic substitution of respective 1,2-bis(bromomethyl)benzene (2) and 1,2,4,5-tetra(bromomethyl)benzene (4) with 8-hydroxyquinoline (1). For comparison, 1,3,5-tris(8-hydroxyquinolinoxymethyl)benzene derivatives (7a and 7b) have been obtained. The complexation behavior of these podands towards Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, and Cd²⁺ metal ions has been investigated in acetonitrile by fluorescence spectroscopy. The sterically crowded 1,2,4,5-tetrapod 5 displays unique fluorescence ‘ON-OFF-ON’ switching through fluorescence quenching (λ_max 395 nm, switch OFF) with <1.0 equiv of Ag⁺ and fluorescence enhancement (λ_max 495 nm, switch ON) with >3 equiv Ag⁺ and can be used for estimation of two different concentrations of Ag⁺ at two different wavelengths. The addition of Cu²⁺, Ni²⁺, and Co²⁺ metal ions to tetrapod 5 causes fluorescence quenching, i.e., ‘ON-OFF’ phenomena at λ_max 395 nm for <10 μM (1 equiv) of these ions but addition of Zn²⁺ and Cd²⁺ to tetrapod 5 results in fluorescence enhancement with a gradual shift of λ_em from 395 to 432 and 418 nm, respectively. Similarly, dipod 3 behaves as an ‘ON-OFF-ON’ switch with Ag⁺, an ‘ON-OFF’ switch with Cu²⁺, and an ‘OFF-ON’ switch with Zn²⁺. The placement of quinolinoxymethyl groups at the 1,3,5-positions of benzene ring in tripod 7a-b leads to simultaneous fluorescence quenching at λ_max 380 nm and enhancement at λ_max 490 nm with both Ag⁺ and Cu²⁺. This behavior is in parallel with 8-methoxyquinoline 8. The rationalization of these results in terms of metal ion coordination and protonation of podands shows that 1,2 placement of quinoline units in tetrapod 5 and dipod 3 causes three different fluorescent responses, i.e., ‘ON-OFF-ON’, ‘ON-OFF’, and ‘OFF-ON’ due to metal ion coordination of different transition metal ions and 1, 3, and 5 placement of three quinolines in tripod 7, the protonation of quinolines is preferred over metal ion coordination. In general, the greater number of quinoline units coordinated per metal ion in 5 compared with the other podands points to organization of the four quinoline moieties around metal ions in the case of 5.     

A logic gate-based fluorogenic probe for Hg detection and its applications in cellular imaging

A new colorimetric and fluorogenic probe (RN₃) based on rhodamine-B has been successfully designed and synthesized. It displays a selective response to Hg²⁺ in the aqueous buffer solution over the other competing metals. Upon addition of Hg²⁺, the solution of RN₃ exhibits a ‘naked eye’ observable color change from colorless to red and an intensive fluorescence with about 105-fold enhancement. The changes in the color and fluorescence are ascribed to the ring-opening of spirolactam in rhodamine fluorophore, which is induced by a binding of the constructed receptor to Hg²⁺ with the association and dissociation constants of 0.22 × 10⁵ M⁻¹ and 25.2 μM, respectively. The Job's plot experiment determines a 1:1 binding stoichiometry between RN₃ and Hg²⁺. The resultant “turn-on” fluorescence in buffer solution, allows the application of a method to determine Hg²⁺ levels in the range of 4.0–15.0 μM, with the limit of detection (LOD) calculated at 60.7 nM (3σ/slope). In addition, the fluorescence ‘turn-off’ and color ‘fading-out’ happen to the mixture of RN₃-Hg²⁺ by further addition of I⁻ or S²⁻. The reversible switching cycles of fluorescence intensity upon alternate additions of Hg²⁺ and S²⁻ demonstrate that RN₃ can perform as an INHIBIT logic gate. Furthermore, the potential of RN₃ as a fluorescent probe has been demonstrated for cellular imaging.     

Ratiometric fluorescence probe for two-photon bioimaging of Cr in living cells

We presented a ratiometric fluorescent probe dansylamide–rhodamine dyad (DANS–RB) for selectively detecting Cr³⁺ in semi-aqueous solution. The detection mechanism relies on the fluorescent resonance energy transfer (FRET) process from the dansylamide (energy donor) to the rhodamine (energy acceptor) after the addition of Cr³⁺. The cell-permeability of DANS–RB was confirmed by the two-photon fluorescence microscopy experiments, which demonstrated DANS–RB was a good candidate for monitoring the intracellular Cr³⁺ level with the ratiometric fluorescent method. Combining the excellent selectivity, the ratiometric quantitative detection, and the cell-permeability, DANS–RB may find a broad application in the investigation on biologically relevant species in living cells.