Molecularly imprinted polymers for sample preparation: A review

In spite of the huge development of analytical instrumentation during last two decades, sample preparation is still nowadays considered the bottleneck of the whole analytical process. In this regard, efforts have been conducted towards the improvement of the selectivity during extraction and/or subsequent clean-up of sample extracts. Molecularly imprinted polymers (MIPs) are stable polymers with molecular recognition abilities, provided by the presence of a template during their synthesis and thus are excellent materials to provide selectivity to sample preparation. In the present review, the use of MIPs in solid-phase extraction and solid-phase microextraction as well as its recent incorporation to other extraction techniques such as matrix-solid phase dispersion and stir bar sorptive extraction, among others, is described. The advantages and drawbacks of each methodology as well as the future expected trends are discussed.     

A cost effective,sensitive, and environmentally friendly sample preparation method for determination of polycyclic aromatic hydrocarbons in solid samples

A simple, cost effective, and yet sensitive sample preparation technique was investigated for determining Polycyclic Aromatic Hydrocarbons (PAHs) in solid samples. The method comprises ultrasonic extraction, Stir Bar Sorptive Extraction (SBSE), and thermal desorption–gas chromatography–mass spectrometry to increase analytical capacity in laboratories. This method required no clean-up, satisfied PAHs recovery, and significantly advances cost performance over conventional extraction methods, such as Soxhlet and Microwave Assisted Extraction (MAE). This study evaluated three operational parameters for ultrasonic extraction: solvent composition, extraction time, and sample load. A standard material, SRM 1649 a (urban dust), was used as the solid sample matrix, and 12 priority PAHs on the US Environmental Protection Agency (US EPA) list were analyzed. Combination of non-polar and polar solvents ameliorated extraction efficiency. Acetone/hexane mixtures of 2:3 and 1:1 (v/v) gave the most satisfactory results: recoveries ranged from 63.3% to 122%. Single composition solvents (methanol, hexane, and dichloromethane) showed fewer recoveries. Comparing 20 min with 60 min sonication, longer sonication diminished extraction efficiencies in general. Furthermore, sample load became a critical factor in certain solvent systems, particularly MeOH. MAE was also compared to the ultrasonic extraction, and results determined that the 20-min ultrasonic extraction using acetone/hexane (2:3, v/v) was as potent as MAE. The SBSE method using 20 mL of 30% alcohol-fortified solution rendered a limit of detection ranging from 1.7 to 32 ng L⁻¹ and a limit of quantitation ranging from 5.8 to 110 ng L⁻¹ for the 16 US EPA PAHs.     

Advances in the determination of degradation intermediates of personal care products in environmental matrixes: a review

In this review, recent methods developed for the determination of degradation intermediates of personal care products in environmental matrixes focusing on the extraction and determination steps are discussed. The five classes of personal care products evaluated are stimulants, fragrances, sunscreens, antimicrobials, and insect repellents. Methods are critically reviewed in terms of the analytical steps involved in the analysis, sample pretreatment, separation, and detection as well as the different confirmation strategies employed. Preconcentration from aqueous matrixes was performed by solid-phase extraction, liquid–liquid extraction, or solid-phase microextraction, allowing the simultaneous extraction of parent compounds and their degradation intermediates. Following the extraction and cleanup steps, the identification and quantification of degradation intermediates of personal care products at environmental levels (i.e., parts per trillion to parts per billion range) is usually performed by using mass spectrometry techniques such as single quadrupole mass spectrometry and more recently by time-of-flight mass spectrometry or tandem mass spectrometry. The main scope of this review is to critically evaluate the current state of the art of the analytical techniques used and to identify the research needs in the determination of degradation intermediates of personal care products in environmental matrixes.     

Green analytical chemistry in sample preparation for determination of trace organic pollutants

The principles of green chemistry are applied to not only chemical engineering and synthesis, but also increasingly analytical chemistry. We describe environment-friendly analytical techniques applied to isolate and to enrich trace organic pollutants from solid and aqueous samples. Amounts of organic solvents used in analytical laboratories are reduced by applying solventless extraction, extraction using other types of solvent, assisted solvent extraction and miniaturized analytical systems.     

Sample preparation for gas chromatographic determination of halogenated volatile organic compounds in environmental and biological samples

In this review, the wide spectrum of the techniques of isolation and/or preconcentration and final determination of halogenated volatile organic compounds (HVOCs) in water, air, soil, sediment and biological fluids are presented and discussed. The techniques discussed are solvent microextraction, solid phase extraction, gas extraction (static and dynamic techniques), membrane processes and passive sampling. Also, direct techniques, such as direct aqueous injection into gas chromatography (GC) column and membrane inlet mass spectrometry, are presented. Main attention is paid to the practical application of these techniques during all HVOCs determination.     

Functionalized gold nanoparticles for sample preparation: A review

Sample preparation is a crucial step for the reliable and accurate analysis of both small molecule and biopolymers which often involves processes such as isolation, pre‐concentration, removal of interferences (purification), and pre‐processing (e.g., enzymatic digestion) of targets from a complex matrix. Gold nanoparticle (GNP)‐assisted sample preparation and pre‐concentration has been extensively applied in many analytical procedures in recent years due to the favorable and unique properties of GNPs such as size‐controlled synthesis, large surface‐to‐volume ratio, surface inertness, straightforward surface modification, easy separation requiring minimal manipulation of samples. This review article primarily focuses on applications of GNPs in sample preparation, in particular for bioaffinity capture and biocatalysis. In addition, their most common synthesis, surface modification and characterization methods are briefly summarized. Proper surface modification for GNPs designed in accordance to their target application directly influence their functionalities, e.g., extraction efficiencies, and catalytic efficiencies. Characterization of GNPs after synthesis and modification is worthwhile for monitoring and controlling the fabrication process to ensure proper quality and functionality. Parameters such as morphology, colloidal stability, and physical/chemical properties can be assessed by methods such as surface plasmon resonance, dynamic light scattering, ζ‐potential determinations, transmission electron microscopy, Taylor dispersion analysis, and resonant mass measurement, among others. The accurate determination of the surface coverage appears to be also mandatory for the quality control of functionality of the nanoparticles. Some promising applications of (functionalized) GNPs for bioanalysis and sample preparation are described herein.     

Bioanalytical methods for determination of tamoxifen and its phase I metabolites: a review

The selective estrogen receptor modulator tamoxifen is used in the treatment of early and advanced breast cancer and in selected cases for breast cancer prevention in high-risk subjects. The cytochrome P450 enzyme system and flavin-containing monooxygenase are responsible for the extensive metabolism of tamoxifen into several phase I metabolites that vary in toxicity and potencies towards estrogen receptor (ER) alpha and ER beta.An extensive overview of publications on the determination of tamoxifen and its phase I metabolites in biological samples is presented. In these publications techniques were used such as capillary electrophoresis, liquid, gas and thin layer chromatography coupled with various detection techniques (mass spectrometry, ultraviolet or fluorescence detection, liquid scintillation counting and nuclear magnetic resonance spectroscopy). A trend is seen towards the use of liquid chromatography coupled to mass spectrometry (LC-MS). State-of-the-art LC-MS equipment allowed for identification of unknown metabolites and quantification of known metabolites reaching lower limit of quantification levels in the sub pg mL⁻¹ range. Although tamoxifen is also metabolized into phase II metabolites, the number of publications reporting on phase II metabolism of tamoxifen is scarce. Therefore the focus of this review is on phase I metabolites of tamoxifen.We conclude that in the past decades tamoxifen metabolism has been studied extensively and numerous metabolites have been identified. Assays have been developed for both the identification and quantification of tamoxifen and its metabolites in an array of biological samples. This review can be used as a resource for method transfer and development of analytical methods used to support pharmacokinetic and pharmacodynamic studies of tamoxifen and its phase I metabolites.     

A environmentally friendly reversed-phase liquid chromatography method for phthalates determination in nail cosmetics

A simple and rapid analytical method was developed for the determination of phthalates, usually employed in nail cosmetic products. The method is based on an ultrasonic extraction of the sample with ethanol-water (90:10, v/v) followed by HPLC separation and quantitation. HPLC was carried out using a C18 column and spectrophotometric detection at 254 nm. A linear gradient elution was performed with ethanol-water starting from 50 to 95% ethanol in 30 min. Standard calibration curves were linear for all the analytes over the concentration range 5-200 μg ml⁻¹ with LOD values of about 0.5 μg ml⁻¹.The proposed green analytical method has been successfully applied for the analysis of commercial samples in order to check the presence of phthalates and to determine their concentration.     

Agarose‐ and alginate‐based biopolymers for sample preparation: Excellent green extraction tools for this century

Recently, there has been considerable interest in the use of miniaturized sample preparation techniques before the chromatographic monitoring of the analytes in unknown complex compositions. The use of biopolymer‐based sorbents in solid‐phase microextraction techniques has achieved a good reputation. A great variety of polysaccharides can be extracted from marine plants or microorganisms. Seaweeds are the major sources of polysaccharides such as alginate, agar, agarose, as well as carrageenans. Agarose and alginate (green biopolymers) have been manipulated for different microextraction approaches. The present review is focused on the classification of biopolymer and their applications in multidisciplinary research. Besides, efforts have been made to discuss the state‐of‐the‐art of the new microextraction techniques that utilize commercial biopolymer interfaces such as agarose in liquid‐phase microextraction and solid‐phase microextraction.     

Microextraction methods for the determination of phthalate esters in liquid samples: A review

1,2‐Benzenedicarboxylic acid esters, commonly referred to as phthalate esters, form a group of compounds that are mainly used as plasticizers in polymers. Because phthalate esters are not chemically bound to the plastics, they can be released easily from products and migrate into the food or water that comes into direct contact. Due to their widespread use, they are considered as ubiquitous environmental pollutants. Phthalate esters are regarded as endocrine disrupting compounds by means of their carcinogenic effect. Phthalate esters can be analyzed by gas chromatography or high‐performance liquid chromatography, however, their sensitivity and selectivity limit their direct use for determination of phthalates at very low level of concentrations exist in environmental samples with complex matrices. Therefore a sample pretreatment prior to their analysis is necessary. In this review, the historical development and overview of sample preparation methodologies have briefly been discussed and a comprehensive application of these methods in combination with different analytical techniques for preconcentration and determination of phthalate esters in various matrices have been summarized. Finally, a critical comparison of the different approaches in terms of enrichment factors achieved, extraction efficiency, precision, selectivity and simplicity of operation is provided.     

Analytical approaches for arsenic determination in air: A critical review

This review describes the different steps involved in the determination of arsenic in air, considering the particulate matter (PM) and the gaseous phase. The review focuses on sampling, sample preparation and instrumental analytical techniques for both total arsenic determination and speciation analysis. The origin, concentration and legislation concerning arsenic in ambient air are also considered. The review intends to describe the procedures for sample collection of total suspended particles (TSP) or particles with a certain diameter expressed in microns (e.g. PM10 and PM2.5), or the collection of the gaseous phase containing gaseous arsenic species. Sample digestion of the collecting media for PM is described, indicating proposed and established procedures that use acids or mixtures of acids aided with different heating procedures. The detection techniques are summarized and compared (ICP-MS, ICP-OES and ET-AAS), as well those techniques capable of direct analysis of the solid sample (PIXE, INAA and XRF). The studies about speciation in PM are also discussed, considering the initial works that employed a cold trap in combination with atomic spectroscopy detectors, or the more recent studies based on chromatography (GC or HPLC) combined with atomic or mass detectors (AFS, ICP-MS and MS). Further trends and challenges about determination of As in air are also addressed.     

Ultrasound: A subexploited tool for sample preparation in metabolomics

Metabolomics, one of the most recently emerged “omics”, has taken advantage of ultrasound (US) to improve sample preparation (SP) steps. The metabolomics–US assisted SP step binomial has experienced a dissimilar development that has depended on the area (vegetal or animal) and the SP step. Thus, vegetal metabolomics and US assisted leaching has received the greater attention (encompassing subdisciplines such as metallomics, xenometabolomics and, mainly, lipidomics), but also liquid–liquid extraction and (bio)chemical reactions in metabolomics have taken advantage of US energy. Also clinical and animal samples have benefited from US assisted SP in metabolomics studies but in a lesser extension. The main effects of US have been shortening of the time required for the given step, and/or increase of its efficiency or availability for automation; nevertheless, attention paid to potential degradation caused by US has been scant or nil. Achievements and weak points of the metabolomics–US assisted SP step binomial are discussed and possible solutions to the present shortcomings are exposed.     

Analytical methods for antifouling booster biocides determination in environmental matrices: A review

Since the discovery of their toxicity to aquatic environments, antifouling booster biocides (ABBs) have been widely researched and detected at trace levels in diverse environmental compartments including water, sediment, and, less frequently, biota. Hence, the reliable assessment of environmental risks posed by ABBs requires the development of analytical methods sufficiently robust, accurate, and precise for the simultaneous trace-level determination of ABBs. Herein, we summarize outstanding sample preparation procedures for the analysis of main ABBs in environmental matrices, describing techniques ranging from traditional extraction methods to novel miniaturized and micro-extraction ones, which have recently received much attention due to their reduced number of steps, low operational cost, and greater respect for the environment. The main applied chromatographic-based methods coupled to different detection techniques are also addressed. Despite the recent development of numerous ABBs determination methods, this topic continues to draw attention because of the lack of standardization among methods, despite legislation set up maximum standards levels for selected ABBs, and the need to monitor ABB transformation products for a reliable ecological risk assessment.     

An environmentally friendly flow system for high-sensitivity spectrophotometric determination of free chlorine in natural waters

A green and highly sensitive analytical procedure was developed for the determination of free chlorine in natural waters, based on the reaction with N,N-diethyl-p-phenylenediamine (DPD). The flow system was designed with solenoid micro-pumps in order to improve mixing conditions by pulsed flows and to minimize reagent consumption as well as waste generation. A 100-cm optical path flow cell based on a liquid core waveguide was employed to increase sensitivity. A linear response was observed within the range 10.0 to 100.0 µg L^− 1, with the detection limit, coefficient of variation and sampling rate estimated as 6.8 µg L^− 1 (99.7% confidence level), 0.9% (n = 20) and 60 determinations per hour, respectively. The consumption of the most toxic reagent (DPD) was reduced 20,000-fold and 30-fold in comparison to the batch method and flow injection with continuous reagent addition, respectively. The results for natural and tap water samples agreed with those obtained by the reference batch spectrophotometric procedure at the 95% confidence level.     

A comprehensive gas chromatography coupled to high resolution mass spectrometry based method for the determination of polybrominated diphenyl ethers and their hydroxylated and methoxylated metabolites in environmental samples

We report here an efficient and comprehensive analytical methodology based on gas chromatography with high resolution mass spectrometry (GC–HRMS) to simultaneously determine PBDEs from mono to deca brominated and hydroxy (OH-) and methoxy (MeO-) PBDE metabolites in environmental samples, particularly, sediment, fish tissue and milk. Among a number of extraction and clean-up methods tested, pressurized liquid extraction followed by gel permeation chromatography and florisil clean-up proved to be simple, robust and optimized so that all target analytes (parent compounds and metabolites) were collected in a single fraction. Extracts were analyzed by GC–HRMS to identify PBDEs. Following, the same extracts were derivatized and re-analyzed by GC–HRMS to determine 11 target and 35 non-target OH- and MeO-PBDEs. Monitoring of the M⁺ for MeO-PBDEs and the [M−CH₂CO]⁺ ions for derivatized OH-PBDEs at 10,000 resolution permitted unequivocal identification of the PBDE metabolites in the environmental matrices examined. The method was validated in terms of accuracy, precision, detection limits and long-term stability. The analytical precision obtained with this method was between 0.3 and 17%, and the limits of quantification were lower than 3.28 pg/g dry weight, 20.5 and 41.4 pg/g lipid weight in sediment, milk and fish, respectively. The method was applied to determine PBDEs and target and non-target metabolites in all three matrices.     

QuEChERS sample preparation for the determination of pesticides and other organic residues in environmental matrices: a critical review

Quick, Easy, Cheap, Effective, Rugged, and Safe (QuEChERS) is an extraction and clean-up technique originally developed for recovering pesticide residues from fruits and vegetables. Since its introduction, and until December 2013, about 700 papers have been published using the QuEChERS technique, according to a literature overview carried out using SciFinder, Elsevier SciVerse, and Google search engines. Most of these papers were dedicated to pesticide multiresidue analysis in food matrices, and this topic has been thoroughly reviewed over recent years. The QuEChERS approach is now rapidly developing beyond its original field of application to analytes other than pesticides, and matrices other than food, such as biological fluids and non-edible plants, including Chinese medicinal plants. Recently, the QuEChERS concept has spread to environmental applications by analyzing not only pesticides but also other compounds of environmental concern in soil, sediments, and water. To the best of our knowledge, QuEChERS environmental applications have not been reviewed so far; therefore, in this contribution, after a general discussion on the evolution and changes of the original QuEChERS method, a critical survey of the literature regarding environmental applications of conventional and modified QuEChERS methodology is provided. The overall recoveries obtained with QuEChERS and other extraction approaches (e.g., accelerated solvent extraction, ultrasonic solvent extraction, liquid/solid extraction, and soxhlet extraction) were compared, providing evidence for QuEChERS higher recoveries for various classes of compounds, such as biopesticides, chloroalkanes, phenols, and perfluoroalkyl substances. The role of physicochemical properties of soil (i.e., clay and organic carbon content, as well as cation exchange capacity) and target analytes (i.e., log K_OW, water solubility, and vapor pressure) were also evaluated in order to interpret recovery and matrix effect data.     

Critical review of the application of liquid chromatography/mass spectrometry to the determination of pesticide residues in biological samples

A critical review is made on the use of hyphenated liquid chromatography/mass spectrometry (LC–MS) for the identification and quantification of pesticides and their metabolites in human biosamples (whole blood, plasma, serum and urine). The first applications of LC–MS in this field began in the early 1990s. Since then, increasing interest has been shown in applying this powerful technique, with most applications dealing with the determination of a variety of chemically diverse metabolites in urine. The use of different LC–MS interfaces and mass spectral detection modes are discussed. Special attention is given to tandem mass spectrometry (MS/MS) due to its inherent advantages of increased sensitivity and selectivity, as well as its advantages for identification and confirmation of analytes in samples. Quantification can be severely affected by matrix effects, the most common being inhibition of the ionisation of analytes in the mass spectrometer, which leads to unacceptable errors if no correction is made. Different approaches can be employed to minimise this undesirable matrix effect, the preferred being the use of labelled internal standards (when available) in isotope dilution methods or the application of an efficient clean-up, performed off-line or automated on-line. Adequate criteria for confirming the identities of residues detected are required in order to avoid false positives. The criterion most commonly used with a triple quadrupole instrument is the monitoring of two MS/MS transitions together with the ion abundance ratio. TOF mass analysers are seldom used in pesticide residue analysis despite their improved resolution and mass accuracy characteristics, which makes them very suitable for confirmation purposes. The main reasons for the relative unpopularity of TOF MS in residue analysis are its limited sensitivity and its high acquisition cost. In this paper, we present a critical assessment on current techniques, trends and future developments, and give illustrative examples to point out the main characteristics of LC–MS for pesticide residue analysis in biological fluids.     

Latest developments in sample treatment for O-isotopic labeling for proteomics mass spectrometry-based approaches: A critical review

Nowadays isotopic ¹⁸O-labeling of peptides has recalled the attention of researchers due to its simplicity of application and high versatility for proteomics studies. Protein quantification, differential peptide mass mapping, studies regarding proteins overexpressed or underexpressed, or the searching of biomarkers can be accomplished by using ¹⁸O-labeling. In this critical review we comment on the different ways in which ¹⁸O-labeling can be done, highlighting the key parameters of the different sample treatments to obtain a reliable and reproducible labeling. In addition we describe and compare the latest improvement in terms of sample treatment that allows to reduce the handling and to increase the throughput for this sample treatment. Finally, we hypothesize on the future trends of these methods under the light of the new technological advances to speed protein cleavage.