Molar heat capacities and standard molar enthalpy of formation of 2-amino-5-methylpyridine

The heat capacities (C _p,m) of 2-amino-5-methylpyridine (AMP) were measured by a precision automated adiabatic calorimeter over the temperature range from 80 to 398 K. A solid-liquid phase transition was found in the range from 336 to 351 K with the peak heat capacity at 350.426 K. The melting temperature (T _m), the molar enthalpy (Δ_fus H _m⁰), and the molar entropy (Δ_fus S _m⁰) of fusion were determined to be 350.431±0.018 K, 18.108 kJ mol⁻¹ and 51.676 J K⁻¹ mol⁻¹, respectively. The mole fraction purity of the sample used was determined to be 0.99734 through the Van’t Hoff equation. The thermodynamic functions (H _T-H _298.15 and S _T-S _298.15) were calculated. The molar energy of combustion and the standard molar enthalpy of combustion were determined, ΔU _c(C₆H₈N₂,cr)= −3500.15±1.51 kJ mol⁻¹ and Δ_c H _m⁰ (C₆H₈N₂,cr)= −3502.64±1.51 kJ mol⁻¹, by means of a precision oxygen-bomb combustion calorimeter at T=298.15 K. The standard molar enthalpy of formation of the crystalline compound was derived, Δ_r H _m⁰ (C₆H₈N₂,cr)= −1.74±0.57 kJ mol⁻¹.     

Low-temperature heat capacities and standard molar enthalpy of formation of the complex

Low-temperature heat capacities of a solid complex Zn(Val)SO₄·H₂O(s) were measured by a precision automated adiabatic calorimeter over the temperature range between 78 and 373 K. The initial dehydration temperature of the coordination compound was determined to be, T _D=327.05 K, by analysis of the heat-capacity curve. The experimental values of molar heat capacities were fitted to a polynomial equation of heat capacities (C _p,m) with the reduced temperatures (x), [x=f (T)], by least square method. The polynomial fitted values of the molar heat capacities and fundamental thermodynamic functions of the complex relative to the standard reference temperature 298.15 K were given with the interval of 5 K. Enthalpies of dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] (Δ_sol H _m,l ⁰) and the Zn(Val)SO₄·H₂O(s) (Δ_sol H _m,2 ⁰) in 100.00 mL of 2 mol dm^–3 HCl(aq) at T=298.15 K were determined to be, Δ_sol H _m,l ⁰=(94.588±0.025) kJ mol^–1 and Δ_sol H _m,2 ⁰=–(46.118±0.055) kJ mol^–1, by means of a homemade isoperibol solution–reaction calorimeter. The standard molar enthalpy of formation of the compound was determined as: Δ_f H _m ⁰ (Zn(Val)SO₄·H₂O(s), 298.15 K)=–(1850.97±1.92) kJ mol^–1, from the enthalpies of dissolution and other auxiliary thermodynamic data through a Hess thermochemical cycle. Furthermore, the reliability of the Hess thermochemical cycle was verified by comparing UV/Vis spectra and the refractive indexes of solution A (from dissolution of the [ZnSO₄·7H₂O(s)+Val(s)] mixture in 2 mol dm^–3 hydrochloric acid) and solution A’ (from dissolution of the complex Zn(Val)SO₄·H₂O(s) in 2 mol dm^–3 hydrochloric acid).     

The standard enthalpy of formation of silver pivalate

The standard enthalpy of combustion of crystalline silver pivalate, (CH₃)₃CC(O)OAg (AgPiv), was determined in an isoperibolic calorimeter with a self-sealing steel bomb, Δ_c H ⁰ (AgPiv, cr)= −2786.9±5.6 kJ mol⁻¹. The value of standard enthalpy of formation was derived for crystalline state: Δ_f H ⁰(AgPiv,cr)= −466.9±5.6 kJ mol⁻¹. Using the enthalpy of sublimation, measured earlier, the enthalpy of formation of gaseous dimer was obtained: Δ_f H ⁰(Ag₂Piv₂,g)= −787±14 kJ mol⁻¹. The enthalpy of reaction (CH₃)₃CC(O)OAg(cr)=Ag(cr)+(CH₃)₃CC(O)O^.(g) was estimated, Δ_r H ⁰=202 kJ mol⁻¹.     

Low-temperature heat capacity and standard molar enthalpy of formation of the complex Zn(Thr)SO4·H2O (s)

Low-temperature heat capacities of the complex Zn(Thr)SO₄·H₂O (s) have been precisely measured with a small sample adiabatic calorimeter over the temperature range from 78 to 373 K. The initial dehydration temperature of the complex (T_d=325.50 K) has been obtained by analysis of the heat-capacity curve. The experimental values of molar heat capacities have been fitted to a polynomial equation by least square method. The standard molar enthalpy of formation of the complex has been determined from the enthalpies of dissolution (Δ_dH_m^Θ) of [ZnSO₄·7H₂O (s) +Thr (s)] and Zn(Thr)SO₄·H₂O (s) in 100 ml of 2 mol dm⁻³ HCl solvent as: Δ_fH_{m,Zn(Thr)SO4·H2O}^Θ=−2111.7±3.4 kJ mol⁻¹. These experiments were made by using an isoperibol solution calorimeter at 298.15 K.     

Low-temperature heat capacities and derived thermodynamic functions of cyclohexane

The low-temperature heat capacities of cyclohexane were measured in the temperature range from 78 to 350 K by means of an automatic adiabatic calorimeter equipped with a new sample container adapted to measure heat capacities of liquids. The sample container was described in detail. The performance of this calorimetric apparatus was evaluated by heat capacity measurements on water. The deviations of experimental heat capacities from the corresponding smoothed values lie within ±0.3%, while the inaccuracy is within ±0.4%, compared with the reference data in the whole experimental temperature range. Two kinds of phase transitions were found at 186.065 and 279.684 K corresponding solid-solid and solid-liquid phase transitions, respectively. The entropy and enthalpy of the phase transition, as well as the thermodynamic functions {H_(T)-H _{298.15 K}} and {S _(T)-S_{298.15 K}}, were derived from the heat capacity data. The mass fraction purity of cyclohexane sample used in the present calorimetric study was determined to be 99.9965% by fraction melting approach. This revised version was published online in July 2006 with corrections to the Cover Date.     

Heat capacity and standard molar enthalpy of formation of crystalline 2,6-dicarboxypyridine (C7H5NO4)

Low-temperature heat capacity C_p,m of 2,6-dicarboxypyridine (C₇H₅NO₄; CAS 499-83-2) was precisely measured in the temperature range from (80 to 378) K with a high precision automated adiabatic calorimeter. No phase transition or thermal anomaly was observed in this range. The thermodynamic functions [H_T − H_298.15] and [S_T − S_298.15] were calculated in the range from (80 to 378) K. The standard molar enthalpy of combustion and the standard molar enthalpy of formation of the compound have been determined, and , by means of a precision oxygen-bomb combustion calorimeter at T = 298.15 K. The thermodynamic properties of the compound were further investigated through differential scanning calorimeter (DSC) and the thermogravimetric (TG) analysis.     

Thermochemical studies for determination of the molar enthalpy of formation of aniline derivatives

The standard (p ^o=0.1 MPa) molar enthalpies of combustion atT=298.15 K were measured by static bomb combustion calorimetry for liquidN,N-diethylaniline,N,N-dimethyl-m-toluidine,N,N-dimethyl-p-toluidine, andN-ethyl-m-toluidine. Vaporization enthalpies forN,N-dimethyl-m-toluidine andN-ethyl-m-toluidine were determined by correlation gas chromatography. Derived standard molar values of _f H _m ^o (g) at 298.15 K forN,N-diethylaniline (62.1±7.6);N,N-dimethyl-m-toluidine (72.6±7.3),N,N-dimentyl-p-toluidine (68.9±7.4),N-ethyl-m-toluidine (30.5±3.8 kJ· mol^–1) were obtained.     

Low-temperature heat capacities and thermodynamic properties of 2,2-dimethyl-1,3-propanediol

The molar heat capacities C _p,m of 2,2-dimethyl-1,3-propanediol were measured in the temperature range from 78 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-solid and a solid-liquid phase transitions were found at T-314.304 and 402.402 K, respectively, from the experimental C _p-T curve. The molar enthalpies and entropies of these transitions were determined to be 14.78 kJ mol⁻¹, 47.01 J K⁻¹ mol⁻ for the solid-solid transition and 7.518 kJ mol⁻¹, 18.68 J K⁻¹ mol⁻¹ for the solid-liquid transition, respectively. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 310 K, C _p,m/(J K⁻¹ mol⁻¹)=117.72+58.8022x+3.0964x ²+6.87363x ³−13.922x ⁴+9.8889x ⁵+16.195x ⁶; x=[(T/K)−195]/115. In the temperature range of 325 to 395 K, C _p,m/(J K⁻¹ mol⁻¹)=290.74+22.767x−0.6247x ²−0.8716x ³−4.0159x ⁴−0.2878x ⁵+1.7244x ⁶; x=[(T/K)−360]/35. The thermodynamic functions H _T−H _298.15 and S _T−S _298.15, were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The thermostability of the compound was further tested by DSC and TG measurements. The results were in agreement with those obtained by adiabatic calorimetry.     

Standard enthalpy of formation of 3,4,5-trimethoxybenzoic acid

The energy of combustion of crystalline 3,4,5-trimethoxybenzoic acid in oxygen at T=298.15 K was determined to be -4795.9±1.3 kJ mol^-1 using combustion calorimetry. The derived standard molar enthalpies of formation of 3,4,5-trimethoxybenzoic acid in crystalline and gaseous states at T=298.15 K, Δ_fH_m ^Θ (cr) and Δ_fH_m ^Θ (g), were -852.9±1.9 and -721.7±2.0 kJ mol^-1, respectively. The reliability of the results obtained was commented upon and compared with literature values. This revised version was published online in August 2006 with corrections to the Cover Date.     

烟酸的低温热容和标准摩尔生成焓

利用精密自动绝热热量计测量了分析纯烟酸在78～400 K温区的低温热容. 用最小二乘法将实验摩尔热容对温度进行拟合, 得到了热容随温度变化的多项式方程. 用此方程进行数值积分, 得到在此温区每隔5 K的舒平热容值和相对于298.15 K时的热力学函数值. 利用精密静止氧弹燃烧热量计测定了烟酸在298.15 K时的恒体积燃烧能为 Δ_cU＝ －(24528.3±16.1) J•g^－1. 依据物质燃烧焓定义计算出烟酸的标准摩尔燃烧焓为: Δ_cH_m^o＝－(3019.05±1.98) kJ•mol^－1. 最后, 依据Hess定律计算出烟酸的标准摩尔生成焓为: Δ_fH_m^o＝－(56.76±2.13) kJ•mol^－1.     

Molar heat capacities and standard molar enthalpy of formation of pyrimethanil butanedioic salt

A noval anilino-pyrimidine fungicide, pyrimethanil butanedioic salt (C₂₈H₃₂N₆O₄), was synthesized by a chemical reaction of pyrimethanil and butanedioic acid. The low-temperature heat capacities of the compound were measured with an adiabatic calorimeter from 80 to 380 K. The thermodynamic function data relative to 298.15 K were calculated based on the heat capacity fitted curve. The thermal stability of the compound was investigated by TG and DSC. The TG curve shows that pyrimethanil butanedioic salt starts to sublimate at 455.1 K and totally changes into vapor when the temperature reaches 542.5 K with the maximal speed of weight loss at 536.8 K. The melting point, the molar enthalpy (Δ_fus H _m), and entropy (Δ_fus S _m) of fusion were determined from its DSC curves. The constant-volume energy of combustion (Δ_c U _m) of pyrimethanil butanedioic salt was measured by an isoperibol oxygen-bomb combustion calorimeter at T = (298.15 ± 0.001) K. From the Hess thermochemical cycle, the standard molar enthalpy of formation was derived and determined to be Δ_f H _m ^o (pyrimethanil butanedioic salt)=?285.4 ± 5.5 kJ mol^?1.     

Standard enthalpy of formation of lanthanum oxybritholites

Lanthanum-bearing silicate-oxyapatites or britholites, Ca_10–xLax(PO₄)_6–x(SiO₄)_xO with 1≤x≤6, have been synthesized by solid state reaction at high temperature. They were characterized by X-ray diffraction and IR spectroscopy. Using two microcalorimeters, the heat of solution of these compounds have been measured at 298 K in a solution of nitric and hydrofluoric acid. A strained least squares method was applied to the experimental results to obtain the solution enthalpies at infinite dilution, and the mixing enthalpy in two steps. In the first step the mixing enthalpy obtained is referenced to the britholite monosubstituted and to the oxysilicate. The mixing enthalpy referenced to the oxyapatite and to the oxysilicate is then extrapolated. In order to determine the enthalpies of formation of all the terms of the solution, thermochemical cycles were proposed and complementary experiments were performed. The results obtained show a decrease of the enthalpy of formation with the amount of Si and La introduced in the lattice. This was explained by the difference in the bond energies of (Ca–O, P–O) and (La–O, Si–O).     

Thermodynamics of Silicon Nitride. Standard molar enthalpy of formation of amorphous Si3N4 at 298.15 K

The standard molar enthalpy of formation Δ_f H _m ⁰=–760±12 kJ for amorphous silicon nitride a-Si₃N₄ has been determined from fluorine combustion calorimetry measurements of the massic energy of the reaction: a-Si₃N₄(s)+6F₂(g)=3SiF₄(g)+2N₂(g). This value combined with Δ_f H _m ⁰= –828.9±3.4 kJ for a-Si₃N₄ indicates that determined for the first time molar enthalpy change for the transition from amorphous to α-crystalline form Δ_trs H _m ⁰=69±13 kJ is very evident, in spite of its large uncertainty range resulting from impurity corrections. This revised version was published online in July 2006 with corrections to the Cover Date.     

L-苏糖酸铜的制备及其标准生成焓

L 苏糖酸作为金属离子的载体,可使金属离子易与氨基酸或蛋白质结合而被动物吸收和利用[1]。本文以L 苏糖酸与Cu2(OH)2CO3·xH2O反应后的溶液浓缩加无水甲醇制得水合物Cu(C4H6O5)·0 5H2O(经HPLC分析,纯度>99 9%),用化学分析、元素分析、IR光谱、TD DTG和量热法进行了表征。1　实验部分1 1　试剂与仪器L 抗坏血酸(Vc)、B.R.(东北制药总厂);H2O2、CaCO3、H2C2O4和Cu2(OH)2CO3·xH2O均为A.R.(西安化学试剂厂);2400型元素分析仪(PE公司);Cu2+含量用Na2S2O3滴定法测定;TG 7型热重分析仪(PE公司);BRUKEREQUINOX 5…     

Low-temperature heat capacity of diglycylglycine

Heat capacity of tripeptide diglycylglycine was measured in a temperature range from 6.5 to 304 K. The results were compared with those for glycine and glycylglycine. Peptide bonding was found not to change C _P(T) virtually above 70 K, where heat capacity does not obey the Debye model. Comparison with literature data allows one to expect a significant difference in the heat capacity for enantiomorph and racemic species of valine and leucine, like it was found recently for D-and DL-serine.     

Low-temperature heat capacity of α and γ polymorphs of glycine

Low-temperature heat capacity of two polymorphs of glycine (α and γ) was measured from 5.5 to 304 K and thermodynamic functions were calculated. Difference in heat capacity between polymorphs ranges from +26% at 10 K to -3% at 300 K. The difference indicates the contribution into the heat capacity of piezoelectric γ polymorph, probably connected with phase transition and ferroelectricity. Thermodynamic evaluations show that at ambient conditions γ polymorph is stable and α polymorph is metastable. This revised version was published online in August 2006 with corrections to the Cover Date.     

Standard enthalpy of formation of platinum hydrous oxide

Standard enthalpies of formation of amorphous platinum hydrous oxide PtH_2.76O_3.89 (Adams' catalyst) and dehydrated oxide PtO_2.52 at T=298.15 K were determined to be -519.6±1.0 and -101.3 ±5.2 kJ mol^-1, respectively, by micro-combustion calorimetry. Standard enthalpy of formation of anhydrous PtO₂ was estimated to be -80 kJ mol^-1 based on the calorimetry. A meaningful linear relationship was found between the pseudo-atomization enthalpies of platinum oxides and the coordination number of oxygen surrounding platinum. This relationship indicates that the Pt-O bond dissociation energy is 246 kJ mol^-1 at T=298.15 K which is surprisingly independent of both the coordination number and the valence of platinum atom. This may provide an energetic reason why platinum hydrous oxide is non-stoichiometric. This revised version was published online in August 2006 with corrections to the Cover Date.     

The standard molar enthalpy of formation,molar heat capacities,and thermal stability of anhydrous caffeine

The constant-volume energy of combustion of crystalline anhydrous caffeine (C₈H₁₀N₄O₂) in α (lower temperature steady) crystal form was measured by a bomb combustion calorimeter, the standard molar enthalpy of combustion of caffeine at T = 298.15 K was determined to be −(4255.08 ± 4.30) kJ · mol⁻¹, and the standard molar enthalpy of formation was derived as −(322.15 ± 4.80) kJ · mol⁻¹. The heat capacity of caffeine in the same crystal form was measured in the temperature range from (80 to 387) K by an adiabatic calorimeter. No phase transition or thermal anomaly was observed in the above temperature range. The thermal behavior of the compound was further examined by thermogravimetry (TG), differential thermal analysis (DTA) over the range from (300 to 700) K and by differential scanning calorimetry (DSC) over the range from (300 to 540) K, respectively. From the above thermal analysis a (solid–solid) and a (solid–liquid) phase transition of the compound were found at T = (413.39 and 509.00) K, respectively; and the corresponding molar enthalpies of these transitions were determined to be (3.43 ± 0.02) kJ · mol⁻¹for the (solid–solid) transition, and (19.86 ± 0.03) kJ · mol⁻¹ for the (solid–liquid) transition, respectively.     

Heat capacity,enthalpy and entropy of calcium niobates

Heat capacity and enthalpy increments of calcium niobates CaNb₂O₆ and Ca₂Nb₂O₇ were measured by the relaxation time method (2–300 K), DSC (260–360 K) and drop calorimetry (669–1421 K). Temperature dependencies of the molar heat capacity in the form C _pm=200.4+0.03432T−3.450·10⁶/T ² J K⁻¹ mol⁻¹ for CaNb₂O₆ and C _pm=257.2+0.03621T−4.435·10⁶/T ² J K⁻¹ mol⁻¹ for Ca₂Nb₂O₇ were derived by the least-squares method from the experimental data. The molar entropies at 298.15 K, S _m⁰(CaNb₂O₆, 298.15 K)=167.3±0.9 J K⁻¹ mol⁻¹ and S _m⁰(Ca₂Nb₂O₇, 298.15 K)=212.4±1.2 J K⁻¹ mol⁻¹, were evaluated from the low temperature heat capacity measurements. Standard enthalpies of formation at 298.15 K were derived using published values of Gibbs energy of formation and presented heat capacity and entropy data: Δ_f H ⁰(CaNb₂O₆, 298.15 K)= −2664.52 kJ mol^t-1 and Δ_f H ⁰(Ca₂Nb₂O₇, 298.15 K)= −3346.91 kJ mol⁻¹.     

Enthalpy of formation of triphenylphosphine sulfide

The first measurements of the enthalpies of combustion, sublimation, and fusion of an organo-phosphorus sulfide, triphenylphosphine sulfide, are reported: _c H _m ^o (C₁₈H₁₅PS, cr)=–(10752.58 ±2.90), _sub H _m ^o (C₁₈H₁₅PS, 403 K)=(136.80±6.09), and _fus H _m ^o (C₁₈H₁₅PS, T_m=435.92 K) =(30.53±0.21) kJ·mol^–1. Correction of the phase change enthalpies toT=298.15K and p^o =0.1 MPa results in the standard phase change enthalpy values of _sub H _m ^o (298.15 K)=(142.8 ±6.8) and _fus H _m ^o (298.15 K)=(19.28±0.21) kj·mol^–1. Accordingly, the enthalpies of formation of solid, liquid, and gaseous triphenylphosphine sulfide are derived: _f H _m ^o (C₁₈H₁₅PS, cr) =(63.20±2.56), _fH _m ^o (C₁₈H₁₅PS, l)=(82.48±2.57), and _fH _m ^o (C₁₈H₁₅PS, g)=(206.0±7.3) kJ·mol^–1. From these ancillary data, the P=S double-bond enthalpy is 394 kJ-mol^–1 and in good agreement with earlier reaction calorimetry results. These phosphorus sulfide values are compared with those for the arsenic sulfides. Plausibility arguments are given for our results.