Local dynamics of micelles of new long-chain surfactants in aqueous media

The molecular dynamics, organization, and phase state of aqueous solutions of new long-chain cationic surfactants with saturated hydrocarbon radicals (from C₁₆ to C₂₂) containing one or two hydroxyl groups in their polar heads are studied by the spin-probe EPR spectroscopy. In the region of micellar solutions, local mobility of surfactant molecules slightly changes with an increase in the length of hydrocarbon radical, whereas the order parameter of micelles increases notably. The addition of two hydroxyl groups to the polar part of long-chain (C ₂₂) surfactant molecule considerably decreases local mobility and increases the ordering of micellar system compared to the micelles of analogous surfactant with one hydroxyl group. Phase transition from micellar to a solid state is observed in this system with a decrease in temperature. The addition of KCl to aqueous surfactant solution lowers the local mobility, increases the order parameter of micelles, and can cause changes in the phase state of a system. In the presence of salt, the correlation time of probe rotation and its order parameter depend on surfactant concentration. Apparently, this is explained by changes in the shape of micelles upon variations in surfactant concentration.     

Block copolymer micelles in aqueous media

Polystyrene-block-poly(methacrylic acid) and poly(methacrylic acid)-block-polystyrene-block-poly(methacrylic acid) di- and triblock copolymers form micelles with polystyrene cores and poly(methacrylic acid) shells when dissolved in water/1, 4-dioxane mixtures, rich in dioxane. These micelles can be transferred into water rich mixtures, into water, and into aqueous buffers by stepwise dialysis. Quasielastic light scattering and sedimentation velocity experiments show that in dioxane rich mixtures exists a dynamic micellization equilibrium, while in dioxane poor solutions and in aqueous buffers the equilibrium is frozen. The process of mixed micelles formation was observed in dioxane rich solutions.     

Synthesis and aqueous solution properties of sterically stabilized pH-responsive polyampholyte microgels

Emulsion copolymerization of poly(methacrylic acid) and poly(2-(diethylamino)ethyl methacrylate) (PMAA/PDEA) yielded pH-responsive polyampholyte microgels of 200-300 nm in diameter. These microgels showed enhanced hydrophilic behavior in aqueous medium at low and high pH, but formed large aggregates of approximately 2500 nm at intermediate pH. To achieve colloidal stability at intermediate pH, a second batch of microgels of identical monomer composition were synthesized, where monomethoxy-capped poly(ethylene glycol)methacrylate (PEGMA) was grafted onto the surface of these particles. Dynamic light-scattering measurements showed that the hydrodynamic radius, Rh, of sterically stabilized microgels was approximately 100 nm at intermediate pH and increased to 120 and 200 nm at pH 2 and 10, respectively. Between pH 4 and 6, these microgels possessed mobility close to zero and a negative second virial coefficient, A2, due to overall charge neutralization near the isoelectric pH. From the Rh, mobility, and A2, cross-linked MAA-DEA microgels with and without PEGMA retained their polyampholytic properties in solution. By varying the composition of MAA and DEA in the microgel, it is possible to vary the isoelectric point of the colloidal particles. These new microgels are being explored for use in the delivery of DNA and proteins.     

Mixed micelles formed by n-octyl-beta-D-glucopyranoside and tetradecyltrimethylammonium bromide in aqueous media

Speed of sound, density, conductivity, and fluorescence spectroscopy experiments were run to analyze the mixed aggregation process of a nonionic-cationic surfactant system in aqueous media at 298.15 K. The mixed system comprises a nonionic surfactant, n-octyl-beta-D-glucopyranoside (OBG), and a cationic surfactant, tetradecyltrimethylammonium bromide (C14TAB), with 8 and 14 carbon atoms on the hydrophobic tails, respectively. From these data, the total and partial critical micellar concentrations, the total and partial aggregation numbers, apparent molar volumes and isentropic compressibilities, hydration numbers, and the corresponding changes in the latest properties due to the mixed aggregation process were determined. Pure and mixed micelles were analyzed from a geometrical point of view by determining the packing parameter of the aggregates. Furthermore, the experimental characterization of both the monomeric and micellar phases was completed with a theoretical study of the mixed micellization phenomena studied herein, by means of some of the most relevant theoretical models.     

The preparation of sterically stabilized polymer dispersions

The emulsion polymerizations of styrene (St) and butyl acrylate (BA) stabilized by nonionic polyoxyethylene type emulsifiers did not show the long stationary rate interval. This was discussed in terms of two opposing effects: 1) the decreased monomer concentration at the reaction loci due to the depletion of monomer droplets or depressed monomer droplet degradation and 2) the increased number of polymer particles with increasing conversion. The continuous particle nucleation is attributed to the continuous release of emulsifier from the emulsifier saturated monomer droplets and/or the presence of monomer swollen micelles (microdroplets). The limited particle flocculation operative at lower emulsifier concentrations increases the nonstationary-state polymerization. The particle agglomeration is accompanied by the increased reaction order x (N_p vs. [E]^x) above 0.6. The increased uniformity of monomer emulsion stabilized by Tween 20 by homogenization of monomer emulsion increased the final conversion and the polymerization rate as well. The polymerization rate vs. conversion curve of the homogenized emulsion characterized with broader stationary rate interval reminds the four rate intervals system typical for miniemulsion. The accumulation of polymer and nonionic emulsifier within the monomer phase preserves the monomer droplets up to high conversion. The decreased monomer droplet degradation rises the monomer-starved condition or the depressed transport of both monomer and emulsifier to the reaction loci.     

Viscoelastic properties of sterically stabilized nonaqueous dispersions

The viscoelastic properties of a dispersion of poly(vinyl acetate) particles sterically stabilized by poly(2-ethyl hexyl methacrylate) and dispersed in Isopar G have been measured as a function of particle concentration and frequency at ambient temperature.At low particle concentrations, it was found that the loss modulus was larger than the storage modulus, while at high particle concentrations, i.e.,w>0.40, the storage modulus was found to be larger than the loss modulus. This inversion from a viscous to an elastic response as a function of particle concentration is attributable to the change in the configurational entropy of the steric barrier as a result of increasing the concentration of particles in the dispersion.     

Synthesis of highly substituted pyrroles using ultrasound in aqueous media

Abstract

A two-step protocol for the synthesis of highly substituted pyrroles in aqueous media and without catalyst is described. The first step is the dimerization of a 1,3-dicarbonyl compound by ceric ammonium nitrate/ultrasound to produce a tetracarbonyl derivative. This derivative is then combined with an amine in the absence of any catalysts to obtain the pyrrole via a Paal–Knorr reaction. This route is an improvement when compared with classical methodologies toward Green Chemistry objectives.

Dispersion behavior of oleic acid in aqueous media: from micelles to emulsions

 Dispersion behavior of aqueous solutions containing oleic acid (RH), sodium oleate (R^-Na⁺), and NaCl was investigated by turbidity and dynamic light-scattering measurements. Changes of the size of scattering particles in solution composed of 1 mM oleic acid and 100 mM NaCl were traced as a function of the degree of ionization α, in terms of radius of the equivalent hydrodynamic sphere. Large associated micelles with a radius of 30 nm appeared by a slight decline of α and existed at α higher than 0.75. They were responsible for the three-phase equilibrium (solution, micelle and aggregated micelle, and acid–soap, (R^-Na⁺)₃RH) characterized by a constant pH of 9.75. The appearance of a new phase, (R^-Na⁺)₃RH, contributed to increase both the turbidity and averaged scattering particle size. As the breakdown of the three-phase equilibrium, radius of scattering particles increased significantly. Finally, oleic acid oil droplets were separated from aqueous phase at low α. When the system was buffered by tris(hydroxymethyl)aminomethane (Tris), scattering particles with a weight-averaged hydrodynamic radius of 75 nm existed in a wide range of α from 0.85 to 0.65. In Tris buffered solution, turbidity formation was induced by the increase in the number of aggregated particles. Received: 12 November 1996 Accepted: 4 April 1997     

Specific interactions improve the loading capacity of block copolymer micelles in aqueous media

Block copolymer micelles find application in many fields as nanocarriers, especially in drug delivery. We report herein that specific interactions between hydrophobic guest molecules and core-forming segments can significantly improve the loading capacity of polymeric micelles. High loading capacities (>100% weight/weight of polymer (w/wp)) were systematically observed for the encapsulation of probes containing weak carboxylic acid groups by micellar nanoparticles having poly[2-(dialkylamino)ethyl methacrylate] cores (i.e., particles whose cargo space exhibits antagonist weak base functions), as demonstrated by the incorporation of indomethacin (IND), ibuprofen (IBPF), and trans-3,5-bis(trifluoromethyl)cinnamic acid (F-CIN) into either poly(ethylene oxide)-b-poly[2-(diisopropylamino)ethyl methacrylate] (PEO-b-PDPA) or poly(glycerol monomethacrylate)-b-PDPA (PG2MA-b-PDPA) micelles. The esterification of IND yielding to a nonionizable IND ethyl ester derivative (IND-Et) caused an abrupt decrease in the micellar loading capacity down to 10-15% w/wp. Similar results were also obtained when IND was combined with nonionizable block copolymers such as PEO-b-polycaprolactone (PEO-b-PCL) and PEO-b-poly(glycidyl methacrylate) (PEO-b-PGMA). The existence of acid-base interactions between the solubilizate and the weak polybase block forming the micelle core was confirmed by 1H NMR measurements. However, the incorporation of high numbers of hydrophobic guest molecules inside polymeric micelles can provoke not only an increase in the hydrodynamic size (2RH) of the objects but also a substantial change in the morphology (transition from spheres to cylinders). The application of the Higuchi model showed that the probe release followed a diffusion-controlled mechanism, and diffusion coefficients (D) on the order of 10-18-10-17 cm2/s were determined for IND release from 1.0 mg/mL PEO113-b-PDPA50 + 100% w/wp IND. Probe release from micelles with weak polybase-based cores can also be triggered by changes in the solution pH.     

Rotational dynamics of thiocyanate ions in highly concentrated aqueous solutions

The thiocyanate (SCN(-)) anion is known as one of the best denaturants, which is also capable of breaking the hydrogen-bond network of water and destabilizing native structures of proteins. Despite prolonged efforts to understand the underlying mechanism of such Hofmeister effects, detailed dynamics of the ions in a highly concentrated solution have not been fully elucidated yet. Here, we used a dispersive IR pump-probe spectroscopic method to study the dependence of vibrational lifetimes and rotational relaxation times of thiocyanate ions on KSCN concentration in D(2)O. The nitrile stretch mode is used as a vibrational probe for dispersed IR pump-probe and FTIR measurements. To avoid possible self-attenuation of the IR pump-probe signal by highly concentrated SCN(-) ions, we added a small amount of (13)C-isotope-labeled thiocyanate ions (S(13)CN(-)) and focused on the excited-state absorption contribution to the IR pump-probe signal of the (13)C-isotope-labeled nitrile stretch mode. Quite unexpectedly, the vibrational lifetime of S(13)CN(-) ions is independent of the total KSCN concentration in the range from 0.46 m (molality) to 11.8 m while the rotational relaxation time of S(13)CN(-) ions is linearly dependent on the total KSCN concentration. By combining the present experimental findings with the fact that the dissolved ions of KSCN salt have a strong tendency to form a large ion cluster in a highly concentrated aqueous solution, we believe that the ion clusters consisting of potassium and thiocyanate ion pairs in D(2)O behave like ionic liquids and the ions inside ion clusters are weakly bound by electrostatic Coulombic interactions. The ability of SCN(-) ions to form ion clusters in aqueous protein solutions seems to be a key to understand the Hofmeister ion effect. We anticipate that the present experimental results provide a clue for further elucidating the underlying mechanism of the Hofmeister ion effects on protein stability in the future.     

Inverse microemulsion polymerization of sterically stabilized polyampholyte microgels

Polyampholyte microgels consisting of various compositions of poly(methacrylic acid) and poly(2-(dimethylamino)ethyl methacrylate) (PMAA-PDMA) cross-linked with allyl methacrylate (AM) were synthesized via the inverse microemulsion polymerization (IMEP) technique. To improve colloidal stability at the isoelectric point (IEP), steric stabilization via the grafting of poly(ethylene glycol) methyl ether methacrylate (PEGMA) on the surface of the microgel was performed. Potentiometric and conductometric titration showed good agreement between the targeted and experimental compositions of the microgel systems. The microgel swelled at low and high pH and possessed a compact structure near the IEP, and the diameter were in good agreement with data from the transmission electron microscopic (TEM) analyses. With increasing pH, the mobility decreased from +2 m(2)s(-1)V (1) at pH 2 to -2 m(2)s(-1)V (1) at pH 10. An empirical relationship describing the PMAA composition and IEP was proposed, where the IEP decreased with increasing PMAA content. The microgel exhibited thermal-responsive properties at high pH, which is dictated by the lower critical solution temperature of PDMA.     

Detailed structure of hairy mixed micelles formed by phosphatidylcholine and PEGylated phospholipids in aqueous media

Aqueous dispersions of mixed egg yolk phosphatidylcholine (PC) and poly(ethylene glycol) (PEG) modified distearoyl phosphatidylethanolamine (DSPE) were investigated with the purpose of determining shape, size, and conformation of the formed mixed micelles. The samples were prepared at a range of DSPEPEG to PC molar ratios ([DSPEPEG/PC] from 100:0 to 30:70) and with, respectively, DSPEPEG2000 and DSPEPEG5000, where 2000 and 5000 refer to the molar masses of the PEG chains. Particle shape and internal structure were studied using small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS). The contrast of the micelles is different for X-rays and neutrons, and by combining SANS and SAXS, complementary information about the micelle structure was obtained. The detailed structure of the micelles was determined in a self-consistent way by fitting a model for the micelles to SANS and SAXS data simultaneously. In general, a model for the micelles with a hydrophobic core, surrounded by a dense hydrophilic layer that is again surrounded by a corona of PEG chains in the form of Gaussian random coils attached to the outer surface, is in good agreement with the scattering data. At high DSPEPEG contents, nearly spherical micelles are formed. As the PC content increases the micelles elongate, and at a DSPEPEG/PC ratio of 30:70, rodlike micelles longer than 1000 angstroms are formed. We demonstrate that by mixing DSPEPEG and PC a considerable latitude in controlling the particle shape is obtained. Our results indicate that the PEG chains in the corona are in a relatively unperturbed Gaussian random coil conformation even though the chains are far above the coil-coil overlap concentration and, therefore, interpenetrating. This observation in combination with the observed growth behavior questions that the "mushroom-brush"transition is the single dominating factor for determining the particle shape as assumed in previous theoretical work (Hristova, K.; Needham, D. Macromolecules 1995, 28, 991-1002).     

Refractive index variation in nonaqueous sterically stabilized copolymer particles

We present procedures for preparing sterically stabilized polymer particles whose refractive index can be controlled over a range of a few percent. Particle sphericity and size distribution are such that suspensions crystallize at high concentrations. This at least ensures that Brownian motion dominates over particle settling and that the polydispersity is no more than about 10%. Of particular interest are new particles comprising poly(methylmethacrylate-co-trifluoroethylacrylate) that can be optically matched in single solvent, namely cis-decalin.     

Synthesis and electrorheological behavior of sterically stabilized polypyrrole-silica-methylcellulose nanocomposite suspension

Various polypyrrole (PPy)-silica-methylcellulose nanocomposite particles were synthesized by suspension polymerization in the presence of silica nanoparticles controlling the ratio of pyrrole, silica, and methylcellulose during the polymerization. The electrorheological (ER) and dielectric properties of the sterically stabilized PPy-silica-methylcellulose nanocomposite suspensions were investigated. The ER response increases with the increase in the silica/pyrrole ratio. The ER behavior also depends on the methylcellulose amount during the polymerization. The yield stress initially increases with the methylcellulose amount, passes through a maximum, and then decreases with the methylcellulose amount. The dielectric constants and dc conductivities of the PPy-silica-methylcellulose nanocomposite particles and the dielectric properties of their suspensions indicate that the increased ER response arises from the enhanced interfacial and particle polarization which depends on the silica/pyrrole ratio and the methylcellulose amount during the polymerization.     

Some highly sterically hindered organo-silanols and -siloxanes

Reaction of the iodides TsiSiMe₂I and TsiSiPh₂I, (Tsi  (Me₃Si)₃C) with AgClO₄ in t-BuOH provides a route to the silanols TsiSiMe₂OH and (Me₃Si)₂-C(SiPh₂Me)(SiMe₂OH), respectively. TsiSiMe₂OH gives the disiloxane TsiSiMe₂OSiMe₃ when treated with either (a) Me₃SiOClO₃ (prepared in situ from AgClO₄ and Me₃SiCl) in benzene, (b) Me₃SiI (in the presence of a little (Me₃Si)₂-NH), (c) O,N-bis(trimethylsilyl)acetamide, or (d) MeLi followed by Me₃SiCl. It does not react with Me₃SiCl, but with Me₂SiCl₂ gives TsiSiMe₂OSiMe₂Cl, and with CH₃COCl gives TsiSiMe₂OCOCH₃. The disiloxane is stable to methanolic acid or base, but reacts with KOH in H₂O/Me₂SO and with CF₃COOH to give TsiSiMe₂OH. The disiloxane (Me₃Si)₂C(SiPh₂Me)(SiMe₂OSiMe₃) is formed by treatment of (Me₃Si)₂C(SiPh₂Me)(SiMe₂OH) with Me₃SiI/(Me₃Si)₂NH. Treatment of TsiSiPhMeI with AgClO₄ in t-BuOH gives the silanols TsiSiPhMeOH and (Me₃Si)₂C(SiPhMe₂)(SiMe₂OH) (which with Me₃SiI/(Me₃Si)₂NH give the corresponding disiloxanes) along with some of the t-butoxide (Me₃Si)₂C(SiPhMe₂)(SiMe₂OBu^t).     

Preparation of sterically stabilized gold nanoparticles for plasmonic applications

Plasmonic nanoparticles such as those of gold or silver have been recently investigated as a possible way to improve light absorption in thin film solar cells. Here, a simple method for the preparation of spherical plasmonic gold nanoparticles in the form of a colloidal solution is presented. The nanoparticle diameter is controlled in the range from several nm to tens of nm depending on the synthesis parameters with the size dispersion down to 14 %. The synthesis is based on thermal decomposition and reduction of the chloroauric acid in the presence of a stabilizing capping agent (surfactant) that is very slowly injected into the hot solvent. The surfactant prevents uncontrolled nanoparticle aggregation during the growth process. The nanoparticle size and shape depend on the type of the stabilizing agent. Surfactants with different lengths of the hydrocarbon chains such as Z-octa-9-decenylamine (oleylamine) with AgNO₃ and polyvinylpyrrolidone with AgNO₃ were used for the steric stabilization. Hydrodynamic diameter of the gold nanoparticles in the colloidal solution was determined by dynamic light scattering while the size of the nanoparticle metallic core was found by small-angle X-ray scattering. The UV-VIS-NIR spectrophotometer measurements revealed a plasmon resonance absorption in the 500–600 nm range. Self-assembled nanoparticle arrays on a silicon substrate were prepared by drop casting followed by spontaneous evaporation of the solvent and by a modified Langmuir-Blodgett deposition. The degree of perfection of the self-assembled arrays was analyzed by scanning electron microscopy and grazing-incidence small-angle X-ray scattering. Homogeneous close-packed hexagonal ordering of the nanoparticles stretching over large areas was evidenced. These results document the viability of the proposed nanoparticle synthesis for the preparation of high-quality plasmonic templates for thin film solar cells with enhanced power conversion efficiency, surface enhanced Raman scattering, and other applications.     

Light scattering study of solubilization of organic molecules by block copolymer micelles in aqueous media

Block copolymers, when dissolved in a selective solvent, form spherical micelles. These micelles can selectively solubilize organic molecules otherwise insoluble in the pure solvent. In this study, we report solubilization of organic molecules by styrene-methacrylic acid block copolymer micelles in aqueous buffers. A light scattering technique was developed to determine the extent of micellar solubilization. Our results indicate that the extent of micellar solubilization depends on the chemical nature of organic molecules, specifically, on the interactions between the organic compound and polystyrene. A thermodynamic model has been developed to describe micellar solubilization. The theoretical calculation agrees reasonably well with the experimental results for two micellar samples examined. ©1995 John Wiley & Sons, Inc.     

Sphere-to-rod transitions of nonionic surfactant micelles in aqueous solution modeled by molecular dynamics simulations

Control of the size and agglomeration of micellar systems is important for pharmaceutical applications such as drug delivery. Although shape-related transitions in surfactant solutions are studied experimentally, their molecular mechanisms are still not well understood. In this study, we use coarse-grained molecular dynamics simulations to describe micellar assemblies of pentaethylene glycol monododecyl ether (C(12)E(5)) in aqueous solution at different concentrations. The obtained size and aggregation numbers of the aggregates formed are in very good agreement with the available experimental data. Importantly, increase of the concentration leads to a second critical micelle concentration where a transition to rod-like aggregates is observed. This transition is quantified in terms of shape anisotropy, together with a detailed structural analysis of the micelles as a function of aggregation number.     

Synthesis of microspheres stabilized sterically with two-component grafted chains by dispersion copolymerizations using mixture of two macromonomers in nonaqueous media

The polymer microspheres were synthesized by dispersion copolymerization of divinylbenzene (DVB) with two vinylbenzyl-terminated poly(ethylene glycol methylether) (PEG)/poly(t-butyl methacrylate) (PBMA) macromonomer blends in methanol. In these systems of two macromonomer blends as the emulsifier, the polymer microspheres formed had a very narrow particle size distribution. Two macromonomers formed comicelles with DVB monomer and acted not only as the comonomer but also as the stabilizer. Such polymer microspheres were stabilized sterically with two-component grafted chains, such as PEG and PBMA, in methanol.     

Soluble complexes of sodium poly(isoprene-b-methacrylate) micelles with cationic surfactants in aqueous media

Water-soluble complexes between sodium poly(isoprene-b-methacrylate) (NaIMA) amphiphilic block copolymer micelles and two cationic surfactants with different hydrophobic tail lengths, namely, dodecyltrimethylammonium bromide (DTMAB) and octyltrimethylammonium bromide (OTMAB), were prepared by mixing individual aqueous solutions of block copolymers and surfactants. The complexes were characterized in terms of size, overall charge, and micropolarity by dynamic light scattering, zeta-potential measurements, and fluorescence spectroscopy. Properties of the systems were investigated as a function of surfactant concentration and surfactant type and state in the initial solutions, as well as temperature. Experiments reveal surfactant complexation at the coronal sodium poly(methacrylate) (NaMA) chains, followed by an increase in mass and a decrease in size of the micelles. Complexation of individual surfactant micelles was observed when the DTMAB concentration in the starting solutions was higher than the surfactant cmc. The complexes show a temperature dependence of their dimension due to the hydrophobic effect.