Irradiation effects on hydrases for biomedical applications

To apply an irradiation technique to sterilize “Hybrid” biomedical materials including enzymes, we selected papain, a well-characterized plant endopeptidase as a model to examine durability of enzyme activity under the practical irradiation condition in which limited data were available for irradiation inactivation of enzymes. Dry powder and frozen aqueous solution of papain showed significant durability against ⁶⁰Co-gamma irradiation suggesting that, the commercial irradiation sterilizing method is applicable without modification. Although irradiation of unfrozen aqueous papain solution showed an unusual change of the enzymatic activity with the increasing doses, and was totally inactivated at 15 kGy, we managed to keep the residual activity more than 50% of initial activity after 30-kGy irradiation, taking such optimum conditions as increasing enzyme concentration from 10 to 100 mg/ml and purging with N₂ gas to suppress the formation of free radicals.     

Fingerprint patterns from laser-induced Azido photochemistry of spin-labeled photoaffinity ATP analogs in matrix-assisted laser desorption/ionization mass spectrometry

The photochemical reaction of azide derivatives induced by ultraviolet (UV) laser in matrix-assisted laser desorption/ionization mass spectrometry (MALDI) is reported. A novel synthesized class of azide aromatic derivatives, spin-labeled photoaffinity non-nucleoside adenosine triphosphate (ATP) analogs which are useful probes in study of muscle contraction mechanism, is used in this investigation. In the negative ion MALDI spectra of these ATP analogs, “fingerprint” peaks corresponding to [M − 10 − 1]⁻, [M − 12 − 1]⁻, [M − 16 − 1]⁻, [M − 26 − 1]⁻, [M − 28 − 1]⁻, [M − 41 − 1]⁻, and [M − 42 − 1]⁻ were observed with relative intensities depending on the MALDI matrix. Only the [M − 16 − 1]⁻ is present in the similar mass spectra of the analog in which the azido group is replaced by a hydrogen. A model is suggested for the photochemical reactions of azide derivatives under UV laser irradiation. The photoreaction fingerprint information is diagnostically useful in characterization of azido compounds, especially for spin-labeled photoaffinity non-nucleoside ATP analogs.     

Effect of γ irradiation on optical properties of Ce-doped phosphate and silicate scintillating glasses

A set of Ce³⁺ activated silicate- and phosphate-based scintillating glasses were submitted to γ irradiation in the ⁶⁰Co radioisotope source “Calliope” (ENEA-Casaccia in Rome, Italy) in the dose range between 1 and 250 Gy (3.7 Gy/h). The effect of ionising radiation was probed by transmission measurements performed before and after each irradiation on all analysed samples. From these data, the radiation-induced absorption coefficient was calculated, proportional to the density of colour centres induced by irradiation in the solid matrix. Results are discussed by taking into account the possible dependence of radiation hardness on the composition of glass matrix.     

Analysis of the diffuse bands near 6100 Å in the fluorescence spectrum of Cs2

The diffuse bands near 6100 Å in the laser-induced fluorescence spectrum of Cs₂ are analyzed through quantum-mechanical spectral simulations. These bands are interpreted as bound-free emission to the vibrational continuum of the ground state from an excited state of ion-pair character. The lower region of this state, which we have labeled E′, is described approximately by the spectroscopic constants, T_e = 19400 cm⁻¹, R_e = 9 Å, and ω_e = 13 cm⁻¹. Experiments with a single-mode Ar⁺ laser as excitation source clearly reveal fine structure in the E′ → X spectrum, which was not evident for multimode laser excitation. This fine structure confirms our analysis and supports our suggestion that extensive averaging over initial (υ′, J′) levels is responsible for the absence of fine structure in the spectra excited by a multimode laser. Various averaging mechanisms are investigated in the spectral calculations. The paper includes a brief review of other work on “structured continua” in diatomic spectra, and a semiclassical treatment of such structure, with emphasis on the distinction between “reflection” structure and “interference” structure.     

Direct and indirect calorimetric studies of stress responses of chlorella cells to infection with the mycoplasma, Acholeplasma laidlawii

This paper reports the defence responses of plant cells to the stress of infection by mycoplasma using an algae model of Chlorella vulgaris under attack by the Mollicute, Acholeplasma laidlawii, which is normally a pathogen of animal systems and higher plants. When the two unicellular organisms were mixed, there was a significant rise in the heat flow rate from 30 min after the chlorella cells were mixed with the mycoplasma cells and were thermally equilibrated in the instrument. There were two peaks in the formation of the superoxide anion radical (O₂√⁻). The first one appeared immediately after mixing the two organisms and essentially was completed in 10 min. This coincided with the raised oxygen uptake rate (OUR) for the supply of the superoxide that can destroy the foreign organisms. The second transient “burst” of superoxide anion radical production was observed after 40–50 min, and correlated with both the continued high level of OUR and the observed “heat burst”. The increased OUR by the chlorella cells at the early stages of infection may be the trigger for further, more prolonged defence reactions by the cells treated with mycoplasma.

The continued infection with mycoplasma, depressed the rate of growth and division of the chlorella cells. This might be caused by competition of the former for substrates required by the host cells. The heat flow rate was also reduced, reflecting the depressed metabolic activity of the plant cells after prolonged exposure to the pathogen.     

Spectres de rotation de la molécule de chlorobenzéne : I. Variétés isotopiques monosubstituées et structure rs

The microwave spectra of chlorobenzene “(1)-³⁵Cl”, all eight mono-[“(1)-³⁷Cl”, “(1)-³⁵Cl, (2)D”, “(1)-³⁵Cl, (3)D”, “(1)-³⁵Cl, (4)D”, “(1)-³⁵Cl, (1)-¹³C”, “(1)-³⁵Cl, (2)-¹³C”, “(1)-³⁵Cl, (3)-¹³C”, “(1)-³⁵Cl, (4)-¹³C”], one di[“(1)-³⁵Cl, (2,6)D₂,”] and one trisubstituted species [“(1)-³⁷Cl, (2,6)D₂”] have been investigated. From the moments of inertia of the vibrational ground state the r_s structure was derived. The reliability of the two small a coordinates could be enhanced through use of the multiply substituted species. The errors of the moments of inertia were propagated to the structural parameters. It could be shown that the benzene ring is deformed. However the quantitative deformation could not be established due to the rather large errors of some structural parameters.     

A comparative study of exogenous surfactant preparations and tracheal aspirate: interfacial tensiometry and properties of foam films

Surfactant replacement therapy has a vital role in the management of respiratory distress syndrome (RDS). Several techniques and models have been largely used to investigate interfacial physico-chemical properties in vitro and to assist clinical efficiency of exogenous surfactant preparations (ESPs) in vivo. Among them are interfacial tensiometry (Langmuir balance coupled with Wilhelmy plate method for surface tension measurement) and black foam film (BFF) method for measuring the capability of ESPs for bilayer foam film formation.

Here, we report some freshly established data from a comparative study of Exosurf, Survanta, Curosurf, Alveofact and clinical samples of tracheal aspirate (TA) of newborns with RDS treated with Curosurf. New observations concerning the properties of foam films of ESPs are also reported and discussed.

Measured interfacial physico-chemical parameters prove “better” properties in vitro of the SP-B and -C containing preparations Curosurf and Alveofact. Their properties are similar, Alveofact showing a higher surface tension lowering capacity under dynamic conditions.

A comparison with measured interfacial parameters of clinical samples shows that after treatment with Curosurf the phospholipid concentration in tracheal aspirates (367 μg/ml) is higher than the minimum phospholipid concentration for stable black film formation (C_t) of all four ESPs studied, while before treatment this concentration (63 μg/ml) is lower than C_t.

Values of measured “dynamic” parameters of clinical samples after treatment with Curosurf approach those of the exogenous surfactant preparation itself.     

Differential thermal analysis under quasi-isothermal, quasi-isobaric conditions (Q-DTA): Part III. Mechanism of congruent and incongruent phase transformations of salt hydrates

By using the “simultaneous Q-DTA, Q-TG measuring technique” elaborated recently, conditions near to the requirements of thermodynamics can be created, thus the “normalized” course of curves taken by this method, their characteristic temperatures or the values measured for the enthalpy change can be considered to be near to the theoretical values.

For testing this new method, CuSO₄·5H₂O, MnSO₄·5H₂O, Mg(NO₃)₂·6H₂O and Na₂SO₄·10H₂O have been investigated. These model substances can be prepared in stoichiometric composition free of impurities, their decomposition mechanism is well-known, thus the effect of the altered experimental conditions by the simultaneous Q-DTA, Q-TG method on the course of their dehydration can be calculated.     

Fourfold clusters of rovibrational energies in H2Te studied with an ab initio potential energy function

We report here an ab initio investigation of the cluster effect (i.e., the formation of four-member groups of nearly degenerate rotation-vibration energy levels at higher J and K_a values) in the H₂Te molecule. The potential energy function has been calculated ab initio at a total of 334 molecular geometries by means of the CCSD (T) method where the (1s-4f) core electrons of the Te atom were described by an effective core potential. The values of the potential energy function obtained cover the region up to around 10 000 cm⁻¹ above the equilibrium energy. On the basis of the ab initio potential, the rotation-vibration energy spectra of H₂ ¹³⁰Te and its deuterated isotopomers have been calculated with the MORBID (Morse oscillator rigid bender internal dynamics) Hamiltonian and computer program. In particular, we have calculated the rotational energy manifolds for J40 in the vibrational ground state, the ν₂ state, the “first triad” (the ν₁/ν₃/2 ν₂ interacting vibrational states), and the “second triad” (the (ν₁ + ν₂)/(ν₂ + ν₃)/3 ν₂ states) of H₂¹³⁰Te. We have also investigated the cluster formation in the vibrational ground state of H₂ ¹³⁰Te by first fitting the rotational data available from experiment with a modified Watson-type effective Hamiltonian and then using the optimized ground state constants to extrapolate the rotational structure to higher J values. Both the ab initio calculation and the prediction with the effective Hamiltonian show that the cluster formation in H₂Te is very similar to that in H₂Se and H₂S, which we have studied previously. However, contrary to semiclassical predictions, we do not determine any significant displacement of the clusters towards lower J values relative to H₂Se. Hence the experimental observation of the cluster states in H₂Te will be at least as difficult as in H₂Se.     

Transition metal complexes with long-chain amines thermal behaviour and crystal structure of (n-CaH2a+1NH2)2ZnCl2

The thermal behaviour of (n-C_aH_2n+1NH₂)₂ZnCl₂ complexes with n = 6, 8, … 16 has been investigated by DSC and by temperature variable IR and X-ray powder diffraction techniques. Complexes with n = 12,14,16 show solid—solid phase transition which are “melting” transitions of the hydrocarbon regions of the structure. The crystal structure of both the low and the high temperature polymorphs is characterized by the piling of sandwiches, each formed by an “inorganic” layer sandwiched between two alkylammonium layers.     

HepG2 human hepatocarcinoma cells: an experimental model for photosensitization by endogenous porphyrins

Endogenous protoporphyurin IX (PpIX) synthesis after δ-aminolaevulinic acid (ALA) administration occurs in cancer cells in vivo; PpIX, which has a short half-life, may thus constitute a good alternative to haematoporphyrin derivative (HPD) (or Photofrin). This study assesses the ability of the human hepatocarcinoma cell line HepG2 to synthesize PpIX in vitro from exogenous ALA, and compares ALA-induced toxicity and phototoxicity with the photodynamic therapy (PDT) effects of HPD on this cell line.

ALA induced a dose-dependent dark toxicity, with 79% and 66% cell survival for 50 and 100 μg ml⁻¹ ALA respectively after 3 h incubation; the same treatment, followed by laser irradiation (λ = 632 nm, 25 J cm⁻²), induced a dose-dependent phototoxicity, with 54% and 19% cell survival 24 h after PDT. Whatever the incubation time with ALA, a 3 h delay before light exposure was found to be optimal to reach a maximum phototoxicity.

HPD induced a slight dose-dependent toxicity in HepG2 cells and a dose- and time-dependent phototoxicity ten times greater than that of ALA-PpIX PDT. After 3 h incubation of 2.5 and 5 μg ml⁻¹ HPD, followed by laser irradiation (λ = 632 nm, 25 J cm⁻²), cell survival was 59% and 24% respectively at 24 h.

Photoproducts induced by light irradiation of porphyrins absorb light in the red spectral region at longer wavelengths than the original porphyrins. The possible enhancement of PDT effects after HepG2 cell incubation with ALA or HPD was investigated by irradiating cells successively with red light (λ = 632 nm) and light (λ = 650 nm). The total fluence was kept constant at 25 J cm⁻². For both HPD and ALA-PpIX PDT, phototoxicity was lower when cells were irradiated for increased periods with λ = 650 nm light than with λ = 632 nm light alone. This suggests that any photoproducts involved either have a short life or are poorly photoreactive.

Not all cell lines can synthesize PpIX after ALA incubation. HepG2 cells, which can synthesize enzymes and precursors of endogenous porphyrin synthesis, represent a good in vitro model for experiments using ALA-PpIX PDT. In addition, ALA-PpIX PDT may represent a new, specific treatment for hepatocarcinomas.     

Gas-phase stability of cluster ions SF m + (SF6) n with m = 0–5 and n = 1–3

The gas-phase stabilities of cluster ions SF⁺_m (SF₆)_n with m = 0−5 were determined by using a high pressure mass spectrometer. The bond energies of SF⁺_m (SF₆)₁ were found to be less than 10 kcal/mol and to decrease with m = 0 → 5. There appear to be rather large gaps in the bond energies between n = 1 and 2 for the clusters SF⁺_m (SF₆)_n with m = 0−4. The structures of SF⁺₅, SF⁺ (SF₆)₁, SF⁺₃ (SF₆)₁, and SF⁺₅ (SF₆)₁ were investigated by ab initio molecular orbital calculations. For SF⁺₅, the D_3h geometry is found to be most stable andC_4v is a transition state of the Berry pseudorotation. For the ion-molecule complexes, the “on-top hat” models were found to be the most stable structures.     

Novel photochemical surface functionalization of polysulfone ultrafiltration membranes for covalent immobilization of biomolecules

The major objective of the work was to develop a heterogeneous modification method for attachment of reactive groups, suitable for covalent immobilization of active biomolecules on the surface of polysulfone ultrafilters without loss of membrane selectivity. For applying a polymer specific activation chemistry, the materials of commercial “polysulfone” UF membranes were identified using elemental analysis along with ¹H NMR, FTIR-ATR and UV spectroscopy. Heterogeneous photoinitiated graft polymerization was realized using acrylic acid (AA) as model monomer and as carrier of reactive groups. Polymer structure (polysulfone, PSf, or polyethersulfone, PESf), coating with photoinitiator (benzophenone, BP, or benzoylbenzoic acid, BPC) and UV excitation energy (λ_exc220> 300 or 350 nm) were the major parameters. Grafted polyAA (g-PAA) could be obtained under almost all conditions but with largely varying yields (DG). However, only with λ_exc350 nm, polymer and pore degradation could be excluded. A new selective initiation of graft polymerization onto PSf, H-abstraction by photoexcited BP derivatives from the methyl side groups, thus avoiding polymer chain scission, was proved indirectly. Modified structures were characterized spectroscopically, including visualization with SFM of laterally patterned surfaces generated by UV irradiation through a mask. UF tests of PSf-g-PAA and PESf-g-PAA UF membranes (DG 100…150 μg/cm²), prepared under “mildly degrading” conditions (λ_exc300 nm), indicated only slight permeability and selectivity changes compared with unmodified samples. Selective PSf functionalization (BPC coating, λ_exc350 nm; DG 5 μg/cm²) caused flux reductions and dextran selectivity increases by factors of 1.3. Covalent immobilization onto g-PAA-functionalized and carbodiimide-activated PSf or PESf membrane surfaces was studied with a protein (BSA), an enzyme (invertase, INV), an antibody-enzyme (IgG-POD) conjugate, and a peptide (“PC1”) as specific antigen of a monoclonal antibody. High binding capacities, up to 40 fold compared with a flat unmodified surface, were detected either directly (BSA) or indirectly via specific activity/binding assays (INV, IgG-POD, “PC1”). This indicated an increased outer membrane surface area due to multifunctional reactive and hydrophilic grafted polymer chains.     

Spectral interferences in the determination of traces of scandium, yttrium and rare earth elements in “pure” rare earth matrices by inductively coupled plasma atomic emission spectrometry: Part VII — Terbium, Dysprosium, Holmium and Thulium

This article is the seventh part of a series of papers discussing the spectral interferences of rare earth elements (REEs) in ICP-AES. Radial viewing 27.12 MHz inductively coupled plasma atomic emission spectrometry (ICP-AES) was used in the determination of scandium, yttrium and rare earth elements in Tb₂O₃, Dy₂O₃, Ho₂O₃ and Tm₂O₃ as “pure” rare earth matrices. The quantification of the interferences in terms of Q-values for line interference Q_I(_a) and wing background interference Q_W(Δλ_a) were used in accordance with Boumans and Vrakking [Spectrochim. Acta Part B 43 (1988) 69]. The “best” analysis lines from point of view of spectral interferences were selected. The true detection limits by using the “best” analysis lines were calculated.     

Pd encapsulated and nanopore hollow fiber membranes: Synthesis and permeation studies

New types of supported Pd membranes were developed for high temperature H₂ separation. Sequential combinations of boehmite sol slip casting and film coating, and electroless plating (ELP) steps were designed to synthesize “Pd encapsulated” and “Pd nanopore” membranes supported on -Al₂O₃ hollow fibers. The permeation characteristics (flux, permselectivity) of a series of unaged and aged encapsulated and nanopore membranes with different Pd loadings were compared to those of a conventional 1 μm Pd/4 μm γ-Al₂O₃/-Al₂O₃ hollow fiber membrane. The unaged encapsulated membrane exhibited good performance with ideal H₂/N₂ separation factors of 3000–8000 and H₂ flux 0.4 mol/m² s at 370 °C and a transmembrane pressure gradient of 4 × 10⁵ Pa. The unaged Pd nanopore membranes had a lower initial flux and permselectivity, but exhibited superior performance with extended use (200 h). At the same conditions the unaged 2.6 μm Pd nanopore membrane had a H₂ flux of 0.16 mol/m² s and separation factor of 500 and the unaged 0.6 μm Pd nanopore membrane had a H₂ flux of 0.25 mol/m² s and separation factor of 50. Both nanopore membranes stabilized after 40 h of operation, in contrast to a continued deterioration of the permselectivity for the other membranes. An analysis of the permeation data reveals a combination of Knudsen and convective transport through membrane defects. A phenomenological, qualitative model of the synthesis and resulting structure of the encapsulated and nanopore membranes is presented to explain the permeation results.     

Interactions of thorium isotopes with colloidal organic matter in oceanic environments

The phase speciation of thorium and consequences for the residence times of colloids have been examined in seawater of the Middle Atlantic Bight (MAB) and the Gulf of Mexico. Two fractions of colloidal organic matter (COM), 0.2 μm > COM₁ > 1 kD and 0.2 μm > COM₁₀ > 10 kD, were sampled using cross-flow ultrafiltration techniques and measured for their ²³⁴Th activity and organic carbon concentration. The ratios of mass concentrations of COM₁ to those of suspended particulate matter were as high as 10 in the MAB and 6–34 in the Gulf of Mexico. Higher concentrations of colloids may be of great importance in the biogeochemical cycling of many particle-reactive nuclides or trace elements owing to their high specific surface area and complexation capacity. A significant fraction of ²³⁴Th in the traditionally defined “dissolved” pool was found to be associated with colloids. On average, about 10% of “dissolved” ²³⁴Th was in the colloidal fraction of sizes between 10 kDa and 0.2 μm, and 50% was in the 1 kDa-0.2 μm fraction. Values of the partition coefficients [K_c: (0.5−4) × 10⁶ ml g⁻¹ for K_c1 and (0.5−7) × 10⁶ ml g⁻¹ for K_c10] of ²³⁴Th between truly dissolved (<1 kDa) and colloidal fractions approximated those for Th-particle interactions [K_p: (0.3−10) × 10⁶ ml g⁻¹], indicating that colloid and suspended particle surface sites are similar. The distribution of ²³⁴Th between dissolved, colloidal, and particulate phases was broadly similar to that of organic carbon in these oceanic environments. Thus, thorium isotopes might be used as tracers of marine organic carbon cycling. Residence times of colloids derived from ²³⁴Th:²³⁸U disequilibria were consistently short, ranging from 1 to 14 days for COM₁₀ and from 5 to 65 days for COM₁, suggesting that marine colloids are highly reactive in marine biogeochemical processes. The discrepancy between apparent turnover times of colloids (1 kDa) derived from Th scavenging and ¹⁴C measurements suggest that ²³⁴Th and ¹⁴C may trace different geochemical pathways of colloids in the ocean.     

Detection of prior irradiation of dried fruits by electron spin resonance (ESR)

Dried almonds, raisins, dates and pistachio were irradiated using either gamma radiation or electron beam, at an average absorbed dose of 5 kGy. To detect the previous irradiation different parts of the dried fruits were analyzed by ESR spectroscopy: almonds: skin; raisins: dried pulp; dates: dried pulp and stone; pistachio: nutshell. Analyses were carried out 2–3 months and 6 months after irradiation. A series of signals tentatively described as “cellulose-like”, “sugar-like” and “complex” radical were observed, and some slight differences between spectra from samples irradiated with gamma rays and electrons were evident.     

Solubility of methane in cellulose acetate — conditioning effect of carbon dioxide

The solubility of CH₄ and CO₂ in cellulose 2.4-acetate membranes was measured at temperatures between —10° and 30°C, and at pressures of up to 40 atm. Pre-exposure of the membrane samples to high-pressure CO₂ caused an increase in the solubility of CH₄, as well as of CO₂ [2]. In contrast, pre-exposure of the samples to high-pressure CH₄ did not alter the solubility of either CH₄ or CO₂. A similar “conditioning effect” by high-pressure CO₂ was also observed with other glassy polymers by Paul et al. [9-11], who reasonably attributed it to the non-equilibrium nature of the glassy state. The solubility isotherms for CH₄ and CO₂ in cellulose 2.4-acetate can be fitted to the “dual-mode” sorption model [1], but a consideration of the heats of solution suggests that a “two Langmuir sites” model [16] may offer a more satisfactory representation of the data. The cellulose acetate samples employed in this study were prepared by drying reverse osmosis membranes and are believed to have contained a large amount of free volume.     

Feasibility of sterilizing traditional Chinese medicines by gamma-irradiation

The feasibility of sterilizing traditional Chinese medicine (TCMs) by γ-irradiation has been systematically evaluated by the biological, toxicological and physicochemical tests on irradiated hundreds of TCMs. Those TCMs investigated in general show no significant biological or toxicological changes after irradiation, yet physicochemical changes are detectable in some irradiated TCMs, and water in TCMs enhances the effects. Those results obtained from radiolysis of some major effective components of TCMs in aqueous or ethanolic solutions reveal that the site selection of radiolytically generated radicals follows the example of simple compounds with same function groups. Wholesomeness and chemical clearance present a bright future to sterilizing TCMs by γ irradiation, however, some important measures and steps should be adopted: (1) The producers must strictly execute manufacturing procedure to reduce microbiological contamination thus lower the applied dose for sterilization which is recommended to be controlled under 5, 7 or 10 kGy, 10 kGy for dry herb, 7 kGy for herbal medicine and 5 kGy for some special herbal medicine; (2) Herb to be sterilized by γ-irradiation should exist in possible dry state; (3) Powder TCMs is recommended to mix with honey forming bolus, which can minimize the decomposition of herb.     

Advancements in internationally accepted standards for radiation processing

Three subcommittees of the American Society for Testing and Materials (ASTM) are developing standards on various aspects of radiation processing. Subcommittee E10.01 “Dosimetry for Radiation Processing” has published 9 standards on how to select and calibrate dosimeters, where to put them, how many to use, and how to use individual types of dosimeter systems. The group is also developing standards on how to use gamma, electron beam, and x-ray facilities for radiation processing, and a standard on how to treat dose uncertainties. Efforts are underway to promote inclusion of these standards into procedures now being developed by government agencies and by international groups such as the United Nations' International Consultative Group on Food Irradiation (ICGFI) in order to harmonize regulations and help avoid trade barriers.

Subcommittee F10.10 “Food Processing and Packaging” has completed standards on good irradiation practices for meat and poultry and for fresh fruits, and is developing similar standards for the irradiation of seafood and spices. These food-related standards are based on practices previously published by ICGFI.

Subcommittee E10.07 on “Radiation Dosimetry for Radiation Effects on Materials and Devices” principally develops standards for determining doses for radiation hardness testing of electronics. Some, including their standards on the Fricke and TLD dosimetry systems are equally useful in other radiation processing applications.