Direct incorporation of a ferric ion in the porphyrinogen core: tetrakis(cyclohexyl)iron porphyrinogen anion with different conformers and its reaction with iodine

Et(4)N[L' 'Fe(III)].3DCM (1) is directly synthesized by adding ferric chloride into a solution of a lithium salt of tetrakis(cyclohexyl)porphyrinogen (L' '). [L' '](4-) is a good chelating ligand for both Fe(III) and Fe(II) ions. It is an avid proton scavenger but not a reducing agent. 1 showed a magnetic moment (mu(eff)) of 4.3 micro(B) in the solid, which changed to 6.0 micro(B) in solution. This change in spin state is common for all iron porphrinogens. 1 showed polymorphism, and with pyridine in the lattice, it changed to Et(4)N[L' 'Fe(III)].DCM(0.5)Py(1.5) (2), possessing two different conformers. Calculation of these conformers at the density functional theory level showed the relative energies of all d orbital changes in three conformers, highlighting the influence of the disposition of a peripheral ligand. Iodine oxidation of 1 yielded [L' '(DeltaDelta)Fe(II)I][I(3).I(2)(+).I(3)(-)] (3) with the introduction of two C(alpha)-C(alpha) bonds with concomitant reduction of Fe(III) to Fe(II). Its mu(eff) (5.4 mu(B)) in the solid changed to 4.8 micro(B) in solution, suggesting a high spin state (S = 2) for Fe(II).     

Experimental anion affinities for the air/water interface

Anion affinities, gammaX-, for the aerial interface of aqueous (Br- + NO3- + I- + SCN- + BF4- + ClO4-) solutions are determined by electrospray ionization mass spectrometry. The composition of the ions ejected from the surface of fissioning nanodroplets shows that gammaX- increase (decrease) exponentially with anionic radii, aX-(dehydration free energies, dGX-), and selectively respond to the presence of surfactants. BF4-, the least hydrated and polarizable anion of the set, has one of the largest gammaX- values. Non-ionic surfactants decrease gammaI- and gammaSCN- but increase gammaBF4-. Cetyltrimethyl ammonium markedly enhances the gammaX- of smaller anions. A similar but weaker effect is observed upon lowering the pH of the bulk solutions from 8.2 to 3.0. Dodecyl sulfate has a negligible effect on gammaX-. Considering that (i) universal many-body electrodynamic interactions will progressively stabilize the interfacial layer as its dielectric permittivity falls relative to that of the bulk solution and (ii) water permittivity is uniformly depressed by increasing concentrations of these anions, we infer that the observed Hofmeister correlation, ln gammaX- infinity - dGX-, is consistent with the optimal depression of the permittivity of the drier interfacial layer by the least hydrated ions. Interfacial ion-ion interactions can significantly influence gammaX- in environmental aqueous media.     

Influence of solvent and counter ion on complexes of 2,5-bis(2-pyridyl)-1,3,4-oxadiazole with iron (II) and (III) studied by electrospray ionization mass spectrometry

The effect of solvent and counter ion on the complexes of 2,5-bis(2-pyridyl)-1,3,4-oxadiazole (1) with Fe+2 and Fe+3 has been studied by electrospray ionization mass spectrometry (ESI/MS). As expected, upon ESI conditions the metal reduction proceeds, but it can be deduced that complexes with Fe+2 are favored over those with Fe+3. When methanol is used as solvent, the formation of complexes of stoichiometry 2:1 and 1:1 with counter ion attached (monovalent anion) is favored, for example, [1(2)+FeCl]+ ion. The use of methanol/water (1/1) as solvent favors the formation of complexes of stoichiometry 2:1 and 3:1, namely doubly charged [1(2)+Fe]+2 and [1(3)+Fe]+2 ions. The complexes containing anion of oxidative properties (ClO4-, NO3-), when the higher cone voltage is applied, yield unusual species [1n+FeOm]+ (n=1, 2; m=1, 2). The use of divalent counter ion (SO4(-2)) resulted in formation of complexes containing two iron cations, namely [1n+Fe2SO4]+2 (n=2, 3, 4) ions. These ions can be regarded as Fe-1 complexes bridged by a sulfate anion.     

Topological control in heterometallic metal-organic frameworks by anion templating and metalloligand design

Several new heterometallic metal-organic frameworks (MOFs) based on tris(dipyrrinato) metalloligands and Ag+ salts are reported. MOFs were prepared systematically to examine the effects of the core metal ion, counteranion, and ligand structure on the topology of the resultant network. The effect of the metal ion (Fe3+ vs Co3+) on MOF structure was generally found to be negligible, thereby permitting the facile synthesis of trimetallic Fe/Co/Ag networks. The choice of anion (e.g., silver salt) was found to have a pronounced effect on the MOF topology. Networks prepared with salts of AgO3SCF3 and AgBF4 reliably formed three-dimensional (10,3) nets, whereas use of AgPF6 and AgSbF6 produced two-dimensional (6,3) honeycomb nets. The topology generated upon formation of the MOF was found to be robust in certain cases, as demonstrated by anion-exchange experiments. Anion exchange was confirmed by X-ray crystallography in a rare set of apparent single-crystal-to-single-crystal transformations. The data presented here strongly suggest that the coordinative ability of the anion does not play a significant role in the observed templating effect. Finally, changes in the length of the tris(dipyrrinato) metalloligand were found to override the anion templating effect, resulting exclusively in two-dimensional (6,3) nets. These studies provide a basis for the rational design of MOF topologies by choice of ligand structure and anion templating effects. Furthermore, the results demonstrate the ability of carefully designed metalloligands to generate MOFs of structure strikingly similar to that of their organic counterparts.     

Infrared photodissociation spectroscopy of mononuclear iron carbonyl anions

The infrared photodissociation spectroscopy of mass-selected mononuclear iron carbonyl anions Fe(CO)(n)(-) (n = 2-8) were studied in the carbonyl stretching frequency region. The FeCO(-) anion does not fragment when excited with infrared light. Only a single IR active band was observed for the Fe(CO)(2)(-) and Fe(CO)(3)(-) anions, consistent with theoretical predictions that these complexes have linear D(∞h) and planar D(3h) symmetry, respectively. The Fe(CO)(4)(-) anion is the most intense peak in the mass spectra and was characterized to have a completed coordination sphere with high stability. Anion clusters larger than n = 4 were determined to involve a Fe(CO)(4)(-) core anion that is progressively solvated by external CO molecules. Three CO stretching vibrational fundamentals were observed for the Fe(CO)(4)(-) core anion, indicating that the Fe(CO)(4)(-) anion has a C(3v) structure. All the carbonyl stretching frequencies of the Fe(CO)(n)(-) anion complexes are red-shifted with respect to those of the corresponding neutrals.     

Supramolecular electron transfer by anion binding

Anion binding has emerged as an attractive strategy to construct supramolecular electron donor-acceptor complexes. In recent years, the level of sophistication in the design of these systems has advanced to the point where it is possible to create ensembles that mimic key aspects of the photoinduced electron-transfer events operative in the photosynthetic reaction centre. Although anion binding is a reversible process, kinetic studies on anion binding and dissociation processes, as well as photoinduced electron-transfer and back electron-transfer reactions in supramolecular electron donor-acceptor complexes formed by anion binding, have revealed that photoinduced electron transfer and back electron transfer occur at time scales much faster than those associated with anion binding and dissociation. This difference in rates ensures that the linkage between electron donor and acceptor moieties is maintained over the course of most forward and back electron-transfer processes. A particular example of this principle is illustrated by electron-transfer ensembles based on tetrathiafulvalene calix[4]pyrroles (TTF-C4Ps). In these ensembles, the TTF-C4Ps act as donors, transferring electrons to various electron acceptors after anion binding. Competition with non-redox active substrates is also observed. Anion binding to the pyrrole amine groups of an oxoporphyrinogen unit within various supramolecular complexes formed with fullerenes also results in acceleration of the photoinduced electron-transfer process but deceleration of the back electron transfer; again, this is ascribed to favourable structural and electronic changes. Anion binding also plays a role in stabilizing supramolecular complexes between sulphonated tetraphenylporphyrin anions ([MTPPS](4-): M = H(2) and Zn) and a lithium ion encapsulated C(60) (Li(+)@C(60)); the resulting ensemble produces long-lived charge-separated states upon photoexcitation of the porphyrins.     

Quantum chemical studies on anion specificity of C<Superscript>α</Superscript>NN motif in functional proteins

Anion binding C^αNN motif is found in functionally important regions of protein structures. This motif based only on backbone atoms from three adjacent residues, recognizes free sulphate or phosphate ion as well as phosphate groups in nucleotides and in a variety of cofactors. The mode of anion recognition and microscopic picture of binding interaction remains unclear. Here we perform self-consistent quantum chemical calculations considering sulphate and phosphate bound C^αNN motif fragments from crystal structures of functional proteins in order to figure out microscopic basis of anion recognition. Our calculations indicate that stability and preference of the anion in the motif depends on the sequence of the motif. The stabilization energy is larger in case of polar residue containing motif fragment. Nitrogen atom of the polar residue of motif mainly participates in the coordination at the lowest energy levels. Anion replacement decreases stabilization energy along with coordination between motif atoms and oxygen atoms of anion shifted to higher energies, suggesting preference of the motif residues to specific anion. Our analysis may be helpful to understand microscopic basis of interaction between proteins and ionic species.     

Photochemical reduction of cytochrome c by a 1,4,5,8-naphthalenediimide radical anion

Steady-state UV irradiation of aqueous solutions containing cytochrome c (cyt c) and N,N'-bis(2-phosphonoethyl)-1,4,5,8-naphthalenediimide (BPNDI), a water-soluble aromatic imide, resulted in the reduction of the heme iron from the Fe(III) to the Fe(II) oxidation state. The reaction kinetics were followed by the increase of the ferrocytochrome c absorbance band at 549 nm. The rate of the photochemical reaction was pH dependent, reaching its maximum values over the pH range 4-7. Addition of electrolyte (NaCl) at pH 5 resulted in a decrease in the reaction rate, as expected for reactions between oppositely charged species. Flash photolysis studies revealed that the actual reductant in the reaction was a photogenerated BPNDI radical anion, which transferred an electron to the cyt c heme iron. The participation of imide radicals in the process was confirmed by the ready reduction of cyt c by BPNDI radicals chemically generated with sodium dithionite.     

Chirality Induction by Formation of Assembled Structures Based on Anion‐Responsive π‐Conjugated Molecules

Anion‐responsive π‐conjugated compounds having chiral alkyl chains were synthesized. Circular dichroism (CD) and circularly polarized luminescence (CPL) were observed in the solution‐state assemblies of the chiral anion receptors and those of their anion complexes as salts of a planar triazatriangulenium cation. The CD and CPL spectral patterns of the ion‐pair‐based assemblies were completely opposite to those of the anion‐free assemblies, and this suggests that anion binding and subsequent ion pairing change the chirality of the assembly modes.     

Macropolyhedral boron-containing cluster chemistry. The reversible disassembly and reassembly of the hexagonal pyramidal {B7} feature in the [S2B18H19]- anion

The [S(2)B(18)H(19)](-) anion 1, from syn-B(18)H(22) 2 with NaH and elemental sulfur, has an unusual arachno-type eleven-vertex {SB(10)} subcluster that has an open hexagonal pyramidal {B(7)} structural feature. This is conjoined, with two boron atoms in common, to a second {SB(10)} subcluster of conventional nido eleven-vertex geometry. Protonation of 1 forms neutral [S(2)B(18)H(20)] 4. Subsequent deprotonation of 4 yields the fluxional [S(2)B(18)H(19)](-) anion 5, which is isomeric with 1. Neutral 4and anion 5 do not have the {B(7)} hexagonal pyramidal feature. Neutral 4 consists of conventional nido eleven-vertex {SB(10)} and arachno ten-vertex {SB(9)} subclusters conjoined with a single spiro boron atom in common. Anion 5 is closely related to 4, but with an additional inter-boron intercluster link. Anion 5 spontaneously reverts to anion 1 over a few hours at room temperature, remarkable in that the open {B(7)} hexagonal pyramid is regenerated. DFT B3LYP/6-31G* calculations suggest definitive structures for 4 and 5 that are substantiated by agreement between observed NMR delta((11)B) values and boron nuclear shielding as calculated by the GIAO approach on the DFT-calculated structures. Extension of this approach additionally defines transition states and intermediates for the fluxionality of 5, and also for the reassembly of the starting anion 1, together with its {B(7)} feature, from fluxional 5. The fluxionality of 5 involves the inter-subcluster transfer of a {BH} unit. The reassembly of 1 from 5 involves a DSD rearrangement and two successive hydrogen-atom hops. Confidence in the application of this method to these large macropolyhedral assemblies is afforded in the first instance by good agreement between delta((11)B)(OBS) and delta((11)B)(CALC) for the structurally characterised original anion 1, the only species amongst these to be crystallographically established.     

Raising the capacity of lithium vanadium phosphate via anion and cation co-substitution

The pursuit for batteries with high specific energy provokes the research of high-voltage/capacity cathode materials with superior stability and safety as the alternative for lithium iron phosphate.Herein,using the sol-gel method,a lithium vanadium phosphate with higher average discharge voltage(3.8 V,vs.Li+/Li) was obtained from a single source for Mg2+ and Cl-co-substitution and uniform carbon coating,and a nearly theoretical capacity(130.1 mA h g^-1) and outstanding rate performance(25 C) are acquired together with splendid capacity retention(80%) after 650 cycles.This work reveals that the well-sized anion and cation substitution and uniform carbon coating are of both importance to accelerate kinetic performance in the context of nearly undisturbed crystal structure for other analogue materials.It is anticipated that the electrochemistry comprehension will shed light on preparing cathode materials with high energy density in the future.     

Amide-based ligands for anion coordination

Anion recognition is an active area of research in supramolecular chemistry. The rapidly increasing amount of structural data now allows anion coordination chemistry to be formalized in terms of coordination numbers and geometries based on hydrogen-bonding interactions between the host (ligand) and the guest (anion). This Minireview targets just one class of anion receptors, namely, amide-based ligands. The structural data for a series of five anion shapes are compiled according to coordination number, and distinct commonalities are observed within a given anion topology. The results also indicate a number of similarities between the coordination of anions and transition-metal ions.     

Nitroxide and anion radicals derived from isatogen and related indole derivatives

Neutral indolic nitroxides were obtained by oxidation of 1-hydroxyindoles with lead dioxide. Anion indolic nitroxides were obtained by reduction of indoline-N-oxides in DMSO/t-BuOK (reducing agent being the CH₃SOCH₂^? anion). In both cases an a^N of about 6 gauss was found. This value, which differs from values previously reported, is justified in the course of the work. Some other anion radicals derived from bi-indolic derivatives are also reported and their structures discussed on the basis of MO calculations or by comparison with analogous examples.     

The perchlorate anion is more effective than the trifluoroacetate anion as an ion-pairing reagent for reversed-phase chromatography of peptides

The addition of salts, specifically sodium perchlorate (NaClO4), to mobile phases at acidic pH as ion-pairing reagents for reversed-phase high-performance liquid chromatography (RP-HPLC) has been generally overlooked. To demonstrate the potential of NaClO4 as an effective anionic ion-pairing reagent, we applied RP-HPLC in the presence of 0-100 mM sodium chloride (NaCl), sodium trifluoroacetate (NaTFA) or NaClO4 to two mixtures of synthetic 18-residue peptides: a mixture of peptides with the same net positive charge (+4) and a mixture of four peptides of +1, +2, +3 and +4 net charge. Interestingly, the effect of increasing NaClO4 concentration on increasing peptide retention times and selectivity changes was more dramatic than that of either NaCl or NaTFA, with the order of increasing anion effectiveness being Cl- < TFA- < C104-. Such effects were more marked when salt addition was applied to eluents containing 10 mM phosphoric acid (H3PO4) compared to 10 mM trifluoroacetic acid (TFA) due to the lesser starting anion hydrophobicity of the former mobile phase (containing the phosphate ion) compared to the latter (containing the TFA- ion).     

Catalytic flow-injection determination of reactive iron in non-acidified water samples.

A flow-injection determination method was proposed for the speciation of reactive species of iron in non-acidified water samples. Iron was determined by the spectrophotometric monitoring of the iron-catalyzed oxidation of o-phenylenediamine with hydrogen peroxide. The reactive iron was characterized as Fe3+ and Fe(III)Li(3-in), where i = 1 or 2 for a unidentate ligand and i = 1 for a bidentate ligand (L(n-)) from the chemical equilibria of hydroxo, oxalato and fluoro Fe(III) complexes. A useful parameter was also proposed to check the reliability of the determination when suffering the adsorption of iron on the inner wall of a PTFE tube of a flow-injection system. Under the optimized FIA condition and by measuring the peak height, a linear calibration curve of iron was obtained up to 0.1 mg L(-1) with a detection limit of 0.1 microg L(-1). The proposed method was successfully applied to the speciation of reactive and unreactive iron in tap- and river-water samples.     

The effect of alkylating agent on the efficiency and selectivity of new polymeric anion exchangers

New anion exchangers for ion chromatography with functional groups of trimethylammonium and 3-chloro-2-hydroxypropyl-N,N-dimethylammonium were obtained. The synthesis included consecutive acetylation of a styrene-divinylbenzene copolymer containing 25% divinylbenzene, reductive amination of carbonyl groups, and subsequent alkylation. Iodomethane and epichlorohydrin were used as alkylating agents. The chromatographic properties of anion exchangers were studied by means of suppressed ion chromatography with conductometric detection. Anion exchangers with the 3-chloro-2-hydroxypropyl-N,N-dimethylammonium group are characterized by better selectivity and higher efficiency for polarizable nitrate and bromide ions, as well as for nonpolarizable chloride, fluoride, nitrite, phosphate, and sulfate ions, compared to those of sorbents with the trimethylammonium group.     

Solid-state coordination chemistry: influences of (M(terpyridyl))(M = Fe(III), Cu(II), Ni(II)) subunits on molybdenum oxide structures

The hydrothermal reactions of Na2MoO4 x 2H2O and 2,2':6',2"-terpyridine with appropriate salts of Fe(II), Cu(II), and Zn(II) yield a variety of mixed metal oxide phases. The Cu(II) system affords the molecular cluster [Cu(terpy)MoO4].3H2O (MOXI-40 x 3H2O), as well as a one-dimensional material [Cu(terpy)Mo2O7](MOXI-41) which is constructed from (Mo4O14)4- clusters linked through (Cu(terpy))2+ units. In constrast, the Zn(II) phase of stoichiometry identical to that of MOXI-41, [Zn(terpy)Mo2O7](MOXI-42), exhibits a one-dimensional structure characterized by a (Mo2O7)n2n- chain decorated with peripheral (Zn(terpy))2+ subunits. The iron species [(Fe(terpy))2Mo4O12](MOXI-43) is also one-dimensional but exhibits [(Fe(terpy))2(MoO4)2]2+ rings linked through (MoO4)2- tetrahedra. A persistent structural motif which appears in MOXI-40, MOXI-41, and MOXI-43 is the [(M(terpy))2(MoO4)2]n cluster with a cyclic )(M2Mo2O4) core. In general, the secondary metal sites M(II, III) are effective bridging groups between molybdate subunits of varying degrees of aggregation. Furthermore, the ligands passivate the bimetallic oxide from spatial extension in two or three dimensions and provide a routine entree into low-dimensional structural types of the molybdenum oxide family of materials.     

Structural,spectroscopic, and redox consequences of a central ligand in the FeMoco of nitrogenase: a density functional theoretical study

Broken symmetry density functional and electrostatics calculations have been used to shed light on which of three proposed atoms, C, N, or O, is most likely to be present in the center of the FeMoco, the active site of nitrogenase. At the Mo(4+)4Fe(2+)3Fe(3+) oxidation level, a central N(3-) anion results in (1) calculated Fe-N bond distances that are in very good agreement with the recent high-resolution X-ray data of Einsle et al.; (2) a calculated redox potential of 0.19 eV versus the standard hydrogen electrode (SHE) for FeMoco(oxidized) + e(-) --> FeMoco(resting), in good agreement with the measured value of -0.042 V in Azotobacter vinelandii; and (3) average M?ssbauer isomer shift values (IS(av) = 0.48 mm s(-1)) compatible with experiment (IS(av) = 0.40 mm s(-1)). At the more reduced Mo(4+)6Fe(2+)1Fe(3+) level, the calculated geometry around a central N(3-) anion still correlates well with the X-ray data, but the average M?ssbauer isomer shift value (IS(av) = 0.54 mm s(-1)) and the redox potential of -2.21 eV show a much poorer agreement with experiment. These calculated structural, spectroscopic, and redox data indicate the most likely iron oxidation state for the resting FeMoco of nitrogenase to be 4Fe(2+)3Fe(3+). At this favored oxidation state, oxygen or carbon coordination leads to (1) Fe-O distances in poor agreement and Fe-C distances in good agreement with experiment and (2) calculated redox potentials of +0.97 eV for O(2-) and -1.31 eV for C(4-). The calculated structural parameters and/or redox data suggest either O(2-) or C(4-) is unlikely as a central anion.     

季铵阳离子与无机阴离子对铁的缓蚀协同效应

在酸性介质中,季铵阳离子与无机阴离子对铁具有明显的缓蚀协同效应,阴离子的表面活性越强,对协同效应的贡献越大,阳离子的结构对协同效应同样有着明显的影响。本文采用电化学方法仔细地研究了硫酸溶液中四丁基铵阳离子(TBA~+)和十六烷基吡啶阳离子(HDP~+)与SCN~-及I~-对铁的缓蚀协同效应。     

Synthesis of an anion receptor for acetate based on the frame of ferrocene

An anion receptor was synthesized with ferrocene as binding frame. Anion recognition can be monitored by anion complexation-induced changes in UV-vis absorption spectra. Interaction between the receptor and acetate was described on the basis of ¹H NMR experiments.