聚丙烯酰胺絮凝效果的母液浓度依赖性及其影响

考察了相同剂量下不同浓度阴离子型聚丙烯酰胺絮凝剂(PAM)母液对三氧化二铁悬浮液的絮凝效果.通过电导率和流变行为测试,阐明了随母液浓度增大絮凝效果先变好后变差的原因.研究结果表明,母液浓度为0.3 g/L时PAM絮凝效果最佳.根据聚电解质标度理论及流变测试结果,认为此最佳母液浓度(cop)接近临界缠结浓度.母液电导率及加入絮凝剂后的搅拌过程中水体电导率变化表明,絮凝剂浓度高于最佳母液浓度时出现的电荷屏蔽现象使得有效电荷减少,导致高母液浓度下絮凝效果变差.向低浓度母液中添加适量β-环糊精后,环糊精分子通过氢键作用搭桥使PAM分子间距变小,发生协同絮凝形成足够大的絮体,从而使絮凝效果得到改善.这一结果表明,低于最佳母液浓度时由于PAM分子相对孤立形成的絮体不足以沉降,是导致絮凝效果较差的原因.     

阳离子聚丙烯酰胺的重要研究技术进展

聚丙烯酰胺(PAM)在许多领域均得到了广泛的应用,而其中很重要的一部分——阳离子聚丙烯酰胺(CPAM)在日常生活和工业生产中,特别是在污水处理中所发挥的作用则尤为显著。本文综合论述了阳离子聚丙烯酰胺的主要用途和作用机理,重点列举了几种较为热门的阳离子聚丙烯酰胺合成技术的特点和研究进展,展示了阳离子聚丙烯酰胺的国内外研究进展,并对国内阳离子聚丙烯酰胺的今后发展进行了展望,为日后对阳离子聚丙烯酰胺的进一步开发研究提供重要参考和依据。     

三乙烯四胺对磺化聚丙烯酰胺性能的影响

研究了水溶液中带有负电荷的磺化聚丙烯酰胺与三乙烯四胺之间的相互作用,考察了三乙烯四胺的引入对磺化聚丙烯酰胺黏度及流变学性质的影响.研究发现,三乙烯四胺的加入可以有效地提高磺化聚丙烯酰胺的黏度、抗剪切性及剪切回复性等性能,为进一步研究其在驱油中的应用提供了理论基础.     

聚丙烯酰胺分子量对其Hofmann反应的影响

协同效应;高分子效应;聚丙烯酰胺分子量对其Hofmann反应的影响     

聚丙烯酰胺/聚异丙基丙烯酰胺互穿网络水凝胶的制备与性能

采用分步法用电子加速器辐射合成了聚丙烯酰胺(PAAm)/聚异丙基丙烯酰胺(PNIPAAm)互穿网络水凝胶,并考察了温度、pH值、离子强度对其溶胀性能的影响.研究表明:互穿水凝胶具有温度敏感性,且其体积相变与互穿网络中PAAm和PNIPAAm含量有关,随着网络中PAAm含量的增加水凝胶的体积相变趋于平缓,可以通过改变PAAm和PNIPAAm的组成比来控制水凝胶的体积相变行为.此外,互穿水凝胶还具有pH敏感性和一定的抗盐性.     

聚丙烯酰胺的形态结构研究

本文用电子显微镜深入的研完了部分水解聚丙烯酰胺在水溶液中的形态。给出大分子的伸展网状结构是其稀溶液高粘度的结构本质。并详细讨论了聚合物的水解度、分子量、外加盐种类及波度与分子聚集状态的关系。     

超高分子量聚丙烯酰胺的表征

采用环己烷及乳化剂ＥＡ合成了分子量（■≥１２００万）的速溶型、粉状聚丙烯酰胺（ＰＡＡ），采用扫描电镜及透射电镜观察了其微细结构，对其速溶性作出了解释。给出了该产品的综合性能数据，与进口样品进行了对比。     

丙烯酰胺水溶液聚合──添加Na_2CO_3制取高分子量阴离子型速溶聚丙烯酰胺的研究

本文建立了丙烯酰胺水溶液聚合的潜在型引发体系；研究了在碳酸盐法聚合体系中，添加不同量氨、尿素、ＥＤＴＡ—２Ｎａ，以及聚合体系ｐＨ、单体浓度、聚合水浴温度对聚合产物分子量及其溶解性能的影响规律和原因；解决了产物高分子量与产生不溶聚合物之间的矛盾；指出了获得高分子量阴离子型速溶粉末产品的关键．从而，用碳酸盐法得到了溶解性能优异的［η］高达２８ｄｌ／ｇ的胶体产品和［η］高达２２ｄｌ／ｇ的速溶粉末产品．     

交联聚丙烯酰胺吸水凝胶的强度

高吸水材料是一类新型的功能高分子材料,已有广泛开发和应用。本文讨论了含大量无机填料膨润土的阴离子型交联聚丙烯酰胺(JSWAM)吸水凝胶的强度及其形态结构。 吸水材料JSWAM的制备:将填料搅拌分散于丙烯酰胺水溶液中,同时加入规定量的甲叉基双丙烯酰胺、过硫酸铵、碱,而后聚合并水解。将聚合物胶块造粒、烘干、粉碎。凝胶强度     

絮凝处理对聚驱污水中部分水解聚丙烯酰胺浓度的影响

用常见无机和有机絮凝剂处理了聚驱污水,分别考察了絮凝剂单剂和复配处理后聚驱污水中残余部分水解聚丙烯酰胺(HPAM)质量浓度和透光率随絮凝剂剂量的变化.结果表明:采用无机絮凝剂处理聚驱污水时,残余HPAM质量浓度随絮凝剂剂量增加先减小后增大;采用有机絮凝剂处理聚驱污水时,残余HPAM质量浓度随絮凝剂剂量增加而线性增加.将无机絮凝剂与无机絮凝剂复配使用,则残余HPAM质量浓度与透光率成反比;将无机絮凝剂与有机絮凝剂复配使用,则残余HPAM质量浓度取决于复配体系中阳离子聚丙烯酰胺(CPAM)的添加量.     

甘氨酸母液脱色活性炭的微波法再生研究

脱色甘氨酸母液的废活性炭,是一类吸附有有机胺类聚合物且难以再生的危险固体废弃物。本文探索性地开展了微波法再生脱色甘氨酸母液废活性炭的研究,考察了活性炭在微波炉中的放置方式、含水率以及微波反应条件等对活性炭再生率和炭损率的影响,分别采用红外光谱法、BET法对活性炭进行了分析表征。实验结果表明,在功率640 W、反应时间8 min的条件下,废活性炭的再生率达99%、综合再生率达59.0%,对再生活性碳进行红外光谱分析表明,在微波功率大于480 W后,微波辐射能有效去除废活性炭中的有机物;在微波功率800W条件下,再生活性炭的BET比表面积由废活性炭的128.15 m2/g提高到1398.5437 m2/g,已达到新鲜活性炭的性能。     

离子色谱-抑制电导检测法同时测定草甘膦母液中的含磷副产物及无机阴离子

建立了一种抑制电导检测-离子色谱(IC)同时测定草甘膦生产工艺中母液里的草甘膦及其副产物、无机阴离子的方法。样品经过滤后直接进样,色谱条件: IonPac AS11-HC分离柱(250 mm×4 mm)和IonPac AG11-HC保护柱(50 mm×4 mm),在线淋洗液发生器KOH梯度淋洗,流速1.0 mL/min,采用抑制电导检测。草甘膦、甲基草甘膦、六甲基磷酰三胺(HMPA)、增甘膦、亚磷酸、磷酸、Cl~和SO2~4的线性范围分别为0.1～20 mg/L、0.1～20 mg/L、0.1～50 mg/L、0.25～50 mg/L、0.05～20 mg/L、0.2～50 mg/L、0.02～20 mg/L和0.05～50 mg/L,相关系数分别为0.9995、0.9993、0.9999、0.9998、0.9999、0.9985、0.9999和0.9980,加标回收率为93.7%～104.0%,相对标准偏差均小于2.5% (n=7),检出限(以信噪比(S/N)=3计)为0.002～0.025 mg/L。该方法用于草甘膦生产工艺中母液里草甘膦及其含磷副产物和无机阴离子的测定,结果令人满意。     

Potential oscillations during the electrochemical treatment of white liquor

Potential oscillations during the electrochemical treatment of white liquor are reported on. White liquor in the kraft process is composed mainly of sodium sulfide, sodium hydroxide, and sodium carbonate. Cyclic voltammetry, linear galvanic voltammetry, and galvanostatic techniques are used to characterize the behavior of the potential oscillations. The amplitude of the harmonic potential oscillations is between −150 and 750 mV (SCE). The behavior of the potential oscillations strongly depends on the applied current density, temperature, and mass transfer. Electrochemical impedance spectroscopy is employed to study the origin of the oscillations during the electrochemical treatment of the white liquor on the Ti/Ta₂O₅-IrO₂ electrodes. Negative faradaic impedance is observed in the potential range of the potential oscillation amplitudes, and equivalent circuits are designed to fit the experimental impedance spectra. The potential oscillations are caused by the synergic effect of sulfur formation/removal and oxygen evolution in the high-potential range. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 5, pp. 617–626. The text was submitted by the authors in English.     

电化学法制备甘露醇阴极液中还原糖的测定

根据电化学制备甘露醇反应体系特征，研究了分光光度法测定阴极液中的还原糖，标准曲线回归方程为Y=0．2151ρ-0．0021，r=0．9999，25倍量的甘露醇和山梨醇对还原糖的测定基本无干扰，阴极液中的加标平均回收率为100．2％。     

Semi‐preparative LC‐SPE‐cryoflow NMR for impurity identifications: use of mother liquor as a better source of impurities

Unambiguous structural elucidation of active pharmaceutical ingredients (API) impurities is a particularly challenging necessity of pharmaceutical development, particularly if the impurities are low level (0.1% level). In many cases, this requires acquiring high‐quality NMR data on a pure sample of each impurity. High‐quality, high signal‐to‐noise (S/N) one‐ and two‐dimensional NMR data can be obtained using liquid chromatography‐solid phase extraction‐cryoflow NMR (LC‐SPE‐cryoflow NMR) with a combination of semi‐preparative column for separation and mother liquor as a source of concentrated impurities. These NMR data, in conjunction with mass spectrometry data, allowed for quick and unambiguous structural elucidations of four impurities found at low level in the crystallized API but found at appreciable levels in the mother liquor that was used as the source for these impurities. These data show that semi‐preparative columns can be used at lower than ideal flow rates to facilitate trapping of HPLC components for LC‐SPE‐cryoflow NMR analysis without compromising chromatographic resolution. Also, despite the complex chromatography encountered with the use of mother liquor as a source of impurities, acceptably pure analytes were obtained for acquiring NMR data for unambiguous structure elucidations. Copyright © 2013 John Wiley & Sons, Ltd.     

Factors affecting the preparation and properties of electrodeposited silica thin films functionalized with amine or thiol groups

Well-adherent sol-gel-derived silica films functionalized with amine or thiol groups have been electrogenerated on gold electrodes and both the deposition process and the film properties have been studied by various physicochemical techniques. Electrodeposition was achieved by combining the formation of a self-assembled "nanoglue" on the electrode surface, the sol-gel process, and the electrochemical manipulation of pH to catalyze polycondensation of the precursors. Gold electrodes pretreated with mercaptopropyltrimethoxysilane (MPTMS) were immersed in sol solutions containing the selected precursors (tetraethoxysilane, TEOS, in mixture with (3-aminopropyl)triethoxysilane, APTES, or MPTMS) where they underwent a cathodic electrolysis to generate the hydroxyl ions that are necessary to catalyze the formation of the organosilica films on the electrode surface. Special attention was given to analyze the effects of deposition time and applied potential and to compare APTES and MPTMS films. Characterization was made using quartz crystal microbalance, scanning electron microscopy, cyclic voltammetry, and atomic force microscopy (including in situ monitoring). The electrodeposition process was found to occur at two growing rates: a first slow stage giving rise to rather homogeneous, yet rough, films with thickness in the sub-mum range (increasing continuously when increasing the deposition time), which was followed by a faster gelification step resulting in much thicker (>1 microm) and rougher macroporous deposits. These two successive situations were observed independently on the applied potential except that more cathodic values led to narrower sub-microm ranges (as expected from the larger amounts of the electrogenerated hydroxyl catalyst). Thiol-functionalized silica films were deposited more rapidly than the amine ones and, for both of them, permeability to redox probe was found to decrease when increasing the film thickness because of higher resistance to mass transport.     

A comparative study for treatment of white liquor by different applications of Fenton process

In this paper, the treatability of white liquor by conventional (CFP), modified (MFP) and electro-Fenton oxidation processes (EFP) was investigated depending on the COD parameter. Based on the experimental results, up to 62.4%, 58.4% and 54.9% COD removals by the CFP, MFP and EFP were achieved, respectively. It was observed that adjustment of initial pH to acidic values is not required in the CFP. The optimal operational conditions were found to be [Fe²⁺] = 500 mg/L, [H₂O₂] = 1000 mg/L at pH 7.3 (original pH) in the CFP, [Fe⁰] = 1250 mg/L, [H₂O₂] = 1000 mg/L at pH 3 in the MFP, and I = 1.0 A, [H₂O₂] = 1500 mg/L at pH 3 in the EFP, respectively. As a result, the CFP has been determined as a more efficient alternative treatment method.     

英平诸痹灵药酒中钴,锶,锂含量分析

采用火焰原子吸收分光光度法测定５种英平诸痹灵药酒中钴、锶、锂的含量。结果表明，该类药酒中微量元素Ｓｒ含量较高，微量元素Ｃｏ、Ｌｉ含量较低，该结果为讨论抗类风湿药物中微量元素与治疗类风湿疾病的关系提供了有用数据。     

Development of a fully buffered molybdate electrolyte for capillary electrophoresis with indirect detection and its use for analysis of anions in Bayer liquor

A new counterion-buffered molybdate electrolyte was developed and optimized for simultaneous quantitative determination of up to eight anions (chloride, sulphate, oxalate, fluoride, formate, malonate, succinate, and acetate) in Bayer liquor by capillary electrophoresis with indirect detection at 214 nm. The separation parameters were optimized in respect to separation of the critical analyte group fluoride-formate-malonate, with the optimal electrolyte prepared from molybdic trioxide containing 5.0 mmol/L MoO3, 1.3 mmol/L cetyltrimethylammonium bromide (CTAB), and buffered with diethanolamine (DEA) to pH 9.2 (ca. 20 mM DEA). Total length of separation capillary was 80 cm, resulting in run time of under 4 min. The method is suitable for a wide concentration range of the analytes (1-50 mg/L) with linear calibration plots (R2 = 0.9983-0.9999). Relative standard deviations were 0.05%-0.07% for migration times and 0.67%-2.04% for peak areas. The detection limits were in the range of 0.17-0.51 mg/L or 2-10 micromol/L (hydrostatic injection of 30 s of 1000 x diluted sample). Due to its good buffering capacity, the electrolyte exhibited an excellent ruggedness and good tolerance to the alkaline samples. Consequently, Bayer liquor samples could be diluted as little as 100 x which allows more sensitive determination of minor components over previous methods. The method was successfully applied to analysis of Bayer liquor samples with recoveries in the range of 95-105%.     

哺乳期母婴微量元素含量的干预研究

通过对陕西省西安地区营养正常的母婴进行干预试验,研究了在其饮食习惯下,哺乳期母婴体内锌、铁、钙三种必需元素的代谢情况,以及是否需要补充,给予适当的补充是否有害。