Design and Synthesis of Aromatic Polyesters Bearing Pendant Clickable Maleimide Groups

A bisphenol bearing pendant maleimide group, namely, N‐maleimidoethyl‐3, 3‐bis(4‐hydroxyphenyl)‐1‐isobenzopyrrolidone (PPH‐MA) was synthesized starting from phenolphthalein. Aromatic (co)polyesters bearing pendant maleimide groups were synthesized from PPH‐MA and aromatic diacid chlorides, namely, isophthaloyl chloride (IPC), terephthaloyl chloride (TPC), and 50:50 mol % mixture of IPC and TPC by low temperature solution polycondensation technique. Copolyesters were also synthesized by polycondensation of different molar proportions of PPH‐MA and bisphenol A with IPC. Inherent viscosities and number‐average molecular weights of aromatic (co)polyesters were in the range of 0.52–0.97 dL/g and 20,200–32,800 g/mol, respectively indicating formation of medium to reasonably high‐molecular‐weight polymers. ¹³C NMR spectral analysis of copolyesters revealed the formation of random copolymers. The 10% weight loss temperature of (co)polyesters was found in the range 470–484 °C, indicating their good thermal stability. A selected aromatic polyester bearing pendant maleimide groups was chemically modified via thiol‐maleimide Michael addition reaction with two representative thiol compounds, namely, 4‐chlorothiophenol and 1‐adamantanethiol to yield post‐modified polymers in a quantitative manner. Additionally, it was demonstrated that polyester containing pendant maleimide groups could be used to form insoluble crosslinked gel in the presence of a multifunctional thiol crosslinker. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 630–640     

Synthesis, characterization and thermal degradation mechanism of three poly(alkylene adipate)s: Comparative study

Three high molecular weight aliphatic polyesters derived from adipic acid and the appropriate diol - poly(ethylene adipate) (PEAd), poly(propylene adipate) (PPAd) and poly(butylene adipate) (PBAd) - were prepared by two-stage melt polycondensation method (esterification and polycondensation) in a glass batch reactor. Intrinsic viscosities, GPC, DSC, NMR and carboxylic end-group measurements were used for their characterization. Mechanical properties of the prepared polyesters showed that PPAd has similar tensile strength to low-density polyethylene while PEAd and PBAd are much higher. From TGA analysis it was found that PEAd and PPAd have lower thermal stability than poly(butylene adipate) (PBAd). The decomposition kinetic parameters of all polyesters were calculated while the activation energies were estimated using the Ozawa, Flynn and Wall (OFW) and Friedman methods. Thermal degradation of PEAd was found to be satisfactorily described by one mechanism, with activation energy 153 kJ/mol, while that of PPAd and PBAd by two mechanisms having different activation energies: the first corresponding to a small mass loss with activation energies 121 and 185 kJ/mol for PPAd and PBAd, respectively, while the second is attributed to the main decomposition mechanism, where substantial mass loss takes place, with activation energies 157 and 217 kJ/mol, respectively.     

Oxidative NHC-Catalysis as Organocatalytic Platform for the Synthesis of Polyester Oligomers by Step-Growth Polymerization

The application of N-heterocyclic carbene (NHC) catalysis to the polycondensation of diols and dialdehydes under oxidative conditions is herein presented for the synthesis of polyesters using fossil-based (ethylene glycol, phthalaldehydes) and bio-based (furan derivatives, glycerol, isosorbide) monomers. The catalytic dimethyl triazolium/1,8-diazabicyclo[5.4.0]undec-7-ene couple and stoichiometric quinone oxidant afforded polyester oligomers with a number-average molecular weight (M_n) in the range of 1.5–7.8 kg mol⁻¹ as determined by NMR analysis. The synthesis of a higher molecular weight polyester (polyethylene terephthalate, PET) by an NHC-promoted two-step procedure via oligoester intermediates is also illustrated together with the catalyst-controlled preparation of cross-linked or linear polyesters derived from the trifunctional glycerol. The thermal properties (TGA and DSC analyses) of the synthesized oligoesters are also reported.     

Sulfonated poly(arylene thioether phosphine oxide)s copolymers for proton exchange membrane fuel cells

High molecular weight sulfonated poly(arylene thioether phosphine oxide)s (sPATPO) with various sulfonation degrees were prepared directly by aromatic nucleophilic polycondensation of 4,4′-thiobisbenzenethiol with sulfonated bis(4-fluorophenyl) phenyl phosphine oxide and bis(4-fluorophenyl) phenyl phosphine oxide. sPATPO in the acid form with sulfonation degrees of 60–100% exhibits a glass transition temperature higher than 230 °C and a 5% weight loss temperature above 400 °C, indicating high thermal stability. sPATPO with a high sulfonation degree shows high proton conductivity and good resistance to swelling as well. For instance, sPATPO-70 displays the conductivity of 0.0783 S/cm and a swelling ratio of 11.6% at 90 °C. TEM micrographs showed that sPATPO membranes with a high sulfonation degree could form continuous ion channels, which are favorable for improving the proton conductivity but harmful to remaining the mechanical property. The membranes are expected to show good performances in fuel cell applications.     

Sul-containing fluorinated polyimides for optical waveguide device

Novel sul-containing fluorinated polyimides have been synthesized by the reaction of 2,2′-bis-(trifluoromethyl)-4,4′-diaminodiphenyl sulfide (TFDAS) with 1,4-bis-(3,4-dicarboxyphenoxy)benzene dianhydride (HQDPA), 2,2′-bis-(3,4-dicarboxyphenyl)hexafluoropropane dianhydride (6FDA), 4,4′-oxydiphthalicanhydride (ODPA) or 3,4,3′,4′-biphenyl-tetracarboxylic acid dianhydride (s-BPDA). The fluorinated polyimides, prepared by a one-step polycondensation procedure, have good solubility in many solvents, such as N-methyl-2-pyrrolidinone (NMP), dimethylacetamide (DMAc), dimethyl sulfoxide (DMSO), cyclohexanone, tetrahydrofuran (THF) and m-cresol. The molecular weights (M_n's) and polydispersities (M_n/M_w's) of polyimides were in the range of 1.24 × 10⁵ to 3.21 × 10⁵ and 1.59–2.20, respectively. The polymers exhibit excellent thermal stabilities, with glass-transition temperatures (T_g) at 221–275 °C and the 5% weight-loss temperature are above 531 °C. After crosslinking, these polymers show higher thermal stability. The films of polymers have high optical transparency. The novel sul-containing fluorinated polyimides also have low absorption at both 1310 and 1550 nm wavelength windows. Rib-type optical waveguide device was fabricated using the fluorinated polyimides and the near-field mode pattern of the waveguide was demonstrated.     

Polyterephthalates made from Ethylene glycol, 1,4‐cyclohexanedimethanol,and isosorbide

Three series of terephthalate polyesters (copolyesters and terpolyesters) containing 70, 80, and 90 mol % of ethylene glycol respectively, 1,4‐cyclohexanedimethanol (CHDM) and isosorbide in varying ratios, were synthesized by melt polycondensation. It was found that only ～75 mol % of the feeding isosorbide was incorporated in the resulting polyesters and that their content in diethylene glycol oscillated between 2 and 4 mol %. The polyesters had weight‐average molecular weights in the 25,000–33,000 g mol^?1 range and polydispersities between 2 and 2.5. The combined ¹H and ¹³C NMR analysis revealed that the microstructure of all these polyesters was at random. They showed good thermal stability with decomposition temperatures above 400 °C. Their glass‐transition temperatures were observed to increase with the content in cyclic diols, this effect being more pronounced when isosorbide was the replacing comonomer. Only the series containing 90 mol % of ethylene terephthalate units was able to crystallize upon cooling from the melt. Compared isothermal crystallizations revealed that isosorbide was more effective than CHDM in repressing the crystallizability of PET. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of new polyamides based on Diphenylaminoisosorbide

New aromatic polyamides were synthesized by the microwave‐assisted polycondensation of an optically active isosorbide‐derived diamine with different diacyl chlorides in the presence of a small amount of N‐methylpyrrolidinone. Polymers with inherent viscosities between 0.22 and 0.73 dL/g were obtained corresponding to molecular weights up to 140,000 g/mol. With interfacial polymerization or the Higashi method, lower molecular weight polymers were obtained with inherent viscosities in the range of 0.04–0.36 dL/g. Differential scanning calorimetry measurements clearly demonstrated the high thermal stability of these polymers (mp = 180–300 °C) and the absence of decomposition. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6480–6491, 2005     

Polycarbonate synthesis by the melt phase carbonate-ester interchange reaction of bisphenol-A diacetate with dimethyl carbonate

The molecular weight of polycarbonate formed by the carbonate-ester interchange reaction of bisphenol-A diacetate (BPAC₂) and dimethyl carbonate (DMC) was found to depend on the composition of the oligomer formed in its first stage. At a [DMC] : [BPAC₂] ratio of 2, an oligomer with relatively higher acetate end group concentration was formed. This upon further polycondensation yielded a polycarbonate of inherent viscosity, 0.2-0.25 dL/g. Upon addition of DMC at a later stage in the oligomer-forming reaction, an oligomer containing relatively higher carbonate end groups could be obtained. These oligomers gave polycarbonates higher inherent viscosity, 0.4-0.5 dL/g. It is therefore proposed that oligomers having carbonate end groups are more reactive in self-polycondensation than those containing acetate end groups. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of thermoplastic copolyesters containing copolymerized azoic dyes

Poly(ethylene terephthalate) and a series of other amorphous copolyesters based on ethylene glycol and terephthalic/isophthalic or 2,6-naphthalenedicarboxylic/isophthalic acid mixtures were prepared by melt polycondensation. Comonomers consisting of azoic dyes having two polymerizable functions on the aromatic rings (either one alcoholic and one carbomethoxyl, two alcoholic or two carbomethoxyl groups) were also added, in amounts lower than 1% mol with respect to the sum of diesters used as starting monomers. In these conditions (P<0.1 torr and T=280°C), only few azoic dyes were found to be stable. Among the prepared polymers, those based on dyes having sufficient thermal stability were characterized by differential scanning calorimetry and solution properties. Inherent viscosities suggest that molecular weights are high. Glass transition and melting temperatures as well as mechanical properties of colored polyesters are not affected by the presence of the azoic comonomers. UV–visible spectra of copolyester solutions were registered, and absorption coefficients were correlated with the amount of dye.     

Thermally Crosslinkable and Chemically Modifiable Aromatic Polyesters Possessing Pendant Propargyloxy Groups

New aromatic (co)polyesters containing pendant propargyloxy groups were synthesized by phase transfer‐catalyzed interfacial polycondensation of 5‐(propargyloxy)isophthaloyl chloride (P‐IPC) and various compositions of P‐IPC and isophthaloyl chloride with bisphenol A. FTIR and NMR spectroscopic data, respectively, revealed successful incorporation of pendant propargyloxy groups into (co)polyesters and formation of (co)polyesters with desired compositions. (Co)polyesters exhibited good solubility in common organic solvents such as chloroform, dichloromethane, and tetrahydrofuran and could be cast into transparent, flexible, and tough films from chloroform solution. Inherent viscosities and number average molecular weights of (co)polyesters were in the range 0.77–1.33 dL/g and 43,600–118,000 g/mol, respectively, indicating the achievement of reasonably high‐molecular weights. The 10% weight loss temperatures of (co)polyesters were in the range 390–420 °C, demonstrating their good thermal stability. (Co)polyesters exhibited T_g in the range 146–170 °C and T_g values decreased with increase in mol % incorporation of P‐IPC. The study of non‐isothermal curing by DSC indicated thermal crosslinking of (co)polyesters via propargyloxy groups. The utility of pendant propargyloxy group was demonstrated by post‐modification of the selected copolyester with 1‐(4‐azidobutyl)pyrene, 9‐(azidomethyl)anthracene, and azido‐terminated poly(ethyleneglycol) monomethyl ether via copper(I)‐catalyzed Huisgen 1,3‐dipolar cycloaddition reaction. FTIR and ¹H NMR spectra confirmed that click reaction was quantitative. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 588–597     

New thermally stable polyesters based on 2,5-pyridinedicarbonyl dichloride and aromatic diols:Synthesis and characterization

Six new thermally stable polyesters(4a-f) were synthesized through the solution polycondensation reaction of 2,5-pyridine dicarbonyldichloride(2) with six aromatic diols in N,N'-dimethyl acetamide(DMAc) solution and in the presence of pyridine as a base.The polycondensation reactions produce a series of new polyesters(4a-f) in high yields,and inherent viscosity between 0.30 and 0.55 dL/g.The resulting polyesters were characterized by elemental analysis,viscosity measurements,thermal gravimetric analysis(...     

Synthesis and thermal characterization of poly(1,3-phenyl octanoate)

Poly(1,3-phenyl octanoate) (polyHPOA) was prepared by melt and solution polycondensation methods from 8-(3-hydroxyphenyl)octanoic acid (HPOA), a novel monomer useful as a chain disruptor in liquid crystalline copolyesters. The melt polycondensation technique gave a polyester of higher inherent viscosity (0.80 dL/g in p-chlorophenol) than that (0.75 and 0.56 dL/g, respectively, for the Ogata method and thionyl chloride/pyridine method in the same solvent) of solution techniques. The solubility of the polyesters was limited to strongly acidic and polar solvents. The polyester was characterized by elemental analysis, IR spectroscopy, WAXD, TGA, isothermal TGA and DTA. x-ray diffraction pattern of the polyesters indicated that it is amorphous in nature. TGA of the polyesters gave a thermal stability of 470°C in nitrogen atmosphere at 50% decomposition. The available thermal data suggest that the polyester undergoes thermal decomposition by a pyrolytic cleavage involving the ester linkage with the formation of ketene and phenol ended groups as intermediates. © 1996 John Wiley & Sons, Inc.     

基于己内酰胺和乙醇胺的聚酯酰胺合成及表征

以己内酰胺及乙醇胺进行开环聚合,合成了聚酰胺预聚物(PrePA),并采用N,N'-碳酰双己内酰胺(CBC)和1,4-双(2-噁唑啉)苯(PBOX)对其进行了扩链反应.进一步将PrePA与己二酸缩聚,制备了聚酯酰胺预聚体(PrePEA),以CBC和PBOX复合扩链剂扩链,获得了特性黏数达0.74 dL/g的聚酯酰胺.并采用红外、核磁及WAXS对聚合物的结构和晶型进行了表征,以DSC和TGA测定了聚合物的热性能,同时对聚合物的力学性能进行了测定.     

Use of a MDI-functionalized reactive polymer for the manufacture of modified bitumen with enhanced properties for roofing applications

In this study, the suitability of a reactive polymer, synthesized by reaction of 4,4′-diphenylmethane diisocyanate (MDI) with a low molecular weight polyethylene-glycol (PEG), as a modifying agent for the manufacture of bitumen-based waterproof membranes, was evaluated. With that purpose, rheological and thermal analysis tests, and microstructural observations by AFM were carried out on different samples of modified bitumen having a MDI–PEG content ranging from 0 to 10 wt.%, cured at room temperature for a period of time within 0–30 days. The results obtained demonstrate that the addition of the reactive polymer proposed in this work to bitumen is very suitable at high in-service temperatures, because a noticeable increase in the values of viscosity, at 60 °C, of the resulting modified bitumen samples is observed on a time-scale of days. AFM observations, carried out at 50 °C, evidenced that the reactive polymer MDI–PEG leads to a new microstructure, displaying a higher level of stiffness. Therefore, this polymer should be seriously taken into consideration as a modifier of bituminous coatings for the waterproofing industry.     

Synthesis and characterization of poly(2,5‐furan dicarboxylate)s based on a variety of diols

Novel polyesters from renewable resources based on 2,5‐dicarboxylic acid and several diols were synthesized and characterized using different polycondensation techniques. The aliphatic diols were sufficiently volatile to allow the use of polytransesterifications, which gave high‐molecular weight semicrystalline materials with good thermal stability. In particular, the polyester based on ethylene glycol displayed properties comparable with those of its aromatic counterpart, poly(ethylene terephthalate), namely, the most important industrial polyester. The use of isosorbide gave rise to amorphous polymers with very stiff chains and hence a high glass transition temperature and an enhanced thermal stability. The interfacial polycondensation between the acid dichloride and hydroquinone produced a semicrystalline material with features similar to those of entirely aromatic polyesters, characterized essentially by the absence of melting and poor solubility, both associated with their remarkable chain rigidity. The replacement of hydroquinone with the corresponding benzylic diol was sufficient to provide a more tractable polyester. This study provided ample evidence in favor of the exploitation of furan monomers as renewable alternatives to fossil‐based aromatic homologs. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A simultaneous TG–DTA study of the thermal decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester (salsalate)

Simultaneous thermogravimetry–differential thermal analysis (TG–DTA) and gas and liquid chromatography with mass spectrometry detection have been used to study the kinetics and decomposition of 2-hydroxybenzoic acid, 2-carboxyphenyl ester, commercially known as salsalate. Samples of salsalate were heated in the TG–DTA apparatus in an inert atmosphere (100 ml min⁻¹ nitrogen) in the temperature range 30–500 °C. The data indicated that the decomposition of salsalate is a two-stage process. The first decomposition stage (150–250 °C) had a best fit with second-order kinetics with E_a=191–198 kJ/mol. The second decomposition stage (300–400 °C) is described as a zero-order process with E_a=72–80 kJ/mol. The products of the decomposition were investigated in two ways:

(a)Salsalate was heated in a gas chromatograph at various isothermal temperatures in the range 150–280 °C, and the exit gas stream analyzed by mass spectrometry (GC–MS). This approach suggested that salsalate decomposes with the formation of salicylic acid, phenol, phenyl salicylate, and cyclic oligomers of salicylic acid di- and tri-salicylides.

(b)One gram samples of salsalate were heated in a vessel under nitrogen to 150 °C, and the residues were analyzed by liquid chromatography–mass spectrometry (LC–MS). The major compound detected was a linear tetrameric salicylate ester.

     

Oligomer formation in the radiation-induced polymerization of styrene

Analyses of the oligomers formed in radiation-induced polymerization of purified styrene were performed. The principal dimeric products were cis- and trans-diphenyl-cyclobutane with a relatively small amount of 1-phenyltetralin; the trimeric products were the optical isomers of 1-phenyl-4-[1′-phenylethyl-(1′)]-tetralin in gamma-ray and 60 MeV proton irradiation. Oligomer formation increased with increasing dose, but more gradually than the linear formation of high polymer with dose. The yield was 0.25–3.1 μmol/J at low doses and decreased to an asymptotic value of 0.15 at higher doses. It appears that oligomers act as chain transfer agents during the polymerization reaction which would account for the observed decrease in molecular weight of the high polymer with increase in dose. Although the thermal and radiation-induced polymerization of styrene have different initiation steps, the oligomers produced by both reactions are similar in composition.     

Aromatic polyesters containing cardo perhydrocumyl cyclohexylidene groups: Synthesis,characterization and gas permeation study

Three bisphenols containing cardo perhydrocumyl cyclohexylidene group, namely; 1,1-bis(4-hydroxyphenyl)-4-perhydrocumylcyclohexane, 1,1-bis(4-hydroxy-3-methylphenyl)-4-perhydrocumylcyclohexane and 1,1-bis(4-hydroxy-3,5-dimethylphenyl)-4-perhydrocumylcyclohexane were synthesized starting from p-cumyl phenol. Each of these bisphenols was polycondensed with both terephthaloyl chloride and isophthaloyl chloride by phase transfer-catalyzed interfacial polymerization to obtain a series of new aromatic polyesters. Inherent viscosities and number average molecular weights of polyesters were in the range 0.51-0.64 dL/g and 17390-41430?g/mol, respectively which indicated the formation of reasonably high molecular weight polymers. The detailed NMR studies revealed that axial and equatorial identity of the phenyl rings of bisphenols was retained in polyesters resulting in constitutional isomerism. Polyesters containing perhydrocumyl cyclohexylidene groups showed excellent solubility in organic solvents viz, chloroform, dichloromethane, 1,1,2,2-tetrachloroethane and tetrahydrofuran. The self-standing films of polyesters could be cast from their chloroform solution. The 10% weight loss temperatures and glass transition temperatures of polyesters were in the range 453–485?°C and 201–267?°C, respectively demonstrating their excellent thermal characteristics. The gas permeability study of polyesters was carried out for He, H₂ and N₂ by variable-volume method. An improvement in permeability and decrease in selectivity was observed due to symmetric methyl substituents while reverse trend was observed in case of polyesters with asymmetric methyl substituents.     

Synthesis of aromatic polyesters by direct polycondensation with triphenylphosphine dichloride

Aromatic polyesters of high molecular weights were prepared by the direct polycondensation reaction of dicarboxylic acids and bisphenols or hydroxybenzoic acids with triphenylphosphine dichloride as a new condensing agent. Reaction conditions, including the amount of reagents and the concentration of monomer, solvent, and acid acceptor, were investigated. The aromatic polyester with the solution viscosity of 1.66 dL/g was obtained from bisphenol. A and terephthalic and isophthalic acid in quantitative yield under the optimum condition. The principal advantage of this condensing agent is that, based on the recycling system, recovered triphenylphosphine oxide can be reconverted to the reactive triphenylphosphine dichloride by treating with phosgene or oxalyl chloride.     

Melt polycondensation approach for reduction degradable helical polyester based on l‐cystine

Melt polycondensation approach is developed for new classes of reduction responsive disulfide containing functional polyesters based on l ‐cystine amino acid resources under solvent free process. l ‐Cystine was converted into multi‐functional ester‐urethane monomer and subjected to thermoselective transesterification at 120 °C with commercial diols in the presence of Ti(OBu)₄ to produce polyesters with urethane side chains. The polymers were produced in moderate to high molecular weights and the polymers were found to be thermally stable up to 250 °C. The β‐sheet hydrogen bonding interaction among the side chain urethane unit facilitated the self‐assembly of the polyester into amyloid‐like fibrils. The deprotection of urethane unit into amine functionality modified the polymers into water soluble cationic polyester spherical nanoparticles. The reduction degradation of disulfide bond was studied using DTT as a reducing agent and the high molecular weight polymers chains were found be chopped into low molecular weight oligomers. The cytotoxicity of cationic disulfide nanoparticle was studied in MCF‐7 cells and they were found to be biocompatible and non‐toxic to cells upto 50 μg/mL. The custom designed reduction degradable and highly biocompatible disulfide polyesters from l ‐cystine are useful for futuristic biomedical applications. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2864–2875