首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 156 毫秒
1.
Differential thermal analysis and differential scanning calorimetry techniques have been used to study the kinetics of phase transitions. The aragonite/calcite transformation was chosen as test reaction.Marked discrepancies were observed between the DTA kinetic results and those obtained from isothermal kinetic measurements. This disagreement is associated with the difficulty of determining accurately the reaction rate of the process from a DTA curve.In contrast, in DSC measurements, where the reaction rate is given by the height of the peak from the base-line, it is possible to get a satisfactory fit of the data, and the kinetic results obtained with this technique are in good agreement with the isothermal ones.
Zusammenfassung Die Differentialthermoanalyse und DSC wurden zur Untersuchung der Kinetik von Phasenübergängen eingesetzt. Die Umwandlung Aragonit/Calcit wurde als Testreaktion gewählt.Bedeutende Diskrepanzen wurden zwischen den kinetischen Ergebnissen der DTA und den durch isotherme kinetische Messungen erhaltenen Ergebnissen beobachtet. Diese Abweichungen sind damit verbunden, daß es schwierig ist, die Reaktionsgeschwindigkeit des Vorgangs aus einer DTA-Kurve genau zu ermitteln.Bei DSC-Messungen,wo die Reaktionsgeschwindigkeit durch die Höhe des Peaks von der Grundlinie gegeben ist, kann eine befriedigende Anpassung der Daten erhalten werden, und die durch diese Technik erhaltenen kinetischen Ergebnisse sind in guter Übereinstimmung mit den isothermen Ergebnissen.

. /. , . -. , , , , , .
  相似文献   

2.
Phase transformations in Cu-12.4% Al and Cu-14.4% Zn-8.4% Al alloys were examined by DTA. The influence of the rate of temperature change on the sequence of phase transformations was studied. It was found that the rates of heating and cooling were the major factors determining the transformations which take place in these alloys.
Zusammenfassung Phasenübergänge in den Legierungen Cu - 12,4% Al und Cu - 14,4% Zn - 8.4% Al wurden thermoanalytisch untersucht. Der Einfluß der Geschwindigkeit der Temperaturänderung auf die Reihenfolge der Phasenübergänge wurde untersucht. Aufheiz- und Abkühlgeschwindigkeit sind die wichtigsten Faktoren, von denen die Phasen übergänge in diesen Legierungen abhängen.

- 12,4% - 14,4% - 8,4% . . , , .
  相似文献   

3.
The thermal behaviour of collidinium decatungstate with twoN,N-dimethylformamide (DMF) crystallization molecules was studied by thermogravimetry. The kinetic parameters for the first stage of the thermal decomposition were established from isothermal and nonisothermal mass-change studies. The chemical reaction in this step is the loss of DMF: as confirmed by1H NMR.The physical model of this reaction, nucleation-growth according to the Avrami-Erofeev law, withn=1/2, was found by comparison of the isothermal and non-isothermal TG data.
Zusammenfassung Das thermische Verhalten von Collidinium-dekawolframat mit zweiN,N-Dimethylformamid-Molekülen (DMF) wurde thermogravimetrisch untersucht. Die kinetischen Parameter des ersten Schrittes der thermischen Zersetzung wurden aus isothermen und nicht-isothermen Massenveränderungen ermittelt. Die in diesem Schritt verlaufende Reaktion ist der Verlust von DMF gemäßwie durch1H-NMR bestätigt wurde. Das physikalische Modell dieser Reaktion, nämlich ein Keimwachstum entsprechend dem Avrami-Erofeev-Gesetz mitn=1/2, wurde durch Vergleich der isothermen und nicht-isothermen TG-Daten gefunden.

(). . , : , - =1/2.
  相似文献   

4.
Surface species of unsaturated hydrocarbons and their catalytic transformations on bimetallic systems have been studied by IR spectroscopy. The results obtained allow to estimate the role of individual components of the given systems in catalytic processes.
- . .
  相似文献   

5.
A new molybdenum(VI) complex, Li2[Mo2O6(C2O4)] · 2 H2O (LMO), was prepared and characterized by chemical analysis and IR spectral studies. Its thermal decomposition was studied by using TG and DTA techniques. LMO loses its two moles of water between 75 and 170° to give the anhydrous product, which decomposes in three stages between 240 and 380°. The first two stages occur in the temperature ranges 240–280° and 280–305°, to give intermediates with the tentative compositions Li6[Mo6O19(C2O4)2] and Li6[Mo6O20(C2O4)], respectively. In the third stage, which extends up to 380°, Li6[Mo6O20(C2O4)] decomposes to give the end-product, Li2Mo2O7.
Zusammenfassung Ein neuer Molybdän(VI)-Komplex der Formel Li2[Mo2O6(C2O4)] · 2 H2O (LMO) wurde dargestellt und durch chemische Analyse und IR-spektroskopisch charakterisiert. Die thermische Zersetzung dieses Komplexes wurde mittels TG und DTA untersucht. LMO verliert die zwei Wassermoleküle zwischen 75 und 170° unter Bildung des wasserfreien Produktes, das zwischen 240 und 380° in drei Stufen zersetzt wird. Die in den Temperaturbereich von 240–280° und 280–305° verlaufenden ersten zwei Reaktionsschritte ergeben Intermediäre der tentativen Zusammensetzung Li6[Mo6O19(C2O4)2] bzw. Li6[Mo6O20(C2O4)]. In dem sich bis 380° erstreckenden dritten Reaktionsschritt wird Li6[Mo6O20(C2O4)] unter Bildung des Endproduktes Li2Mo2O7 zersetzt.

Li2[MO2O6(C2O4] · 2 2 . . - 70–170° , , 240–380°. 240–280° 280–305° - Li6[Mo6O19(C2O4)2] Li6[Mo6O20(C2O4)]. - 380° Li2Mo2O7.


The authors are grateful to Prof. S. N. Tandon, Head of the Chemistry Department, for providing the research facilities.  相似文献   

6.
Galvanic cells of the type (C+Cl2)(NaCl(s))(MCl2(s))(C+Cl2) give e. m. f. 's above 280°, which are due to the formation of ternary chlorides NanMCln+2. By the change in slope of continuously measured e.m.f.vs. T curves, the temperatures of solid-state reactions in systems NaCl-MCl2 can be found. This method was applied for the systems of NaCl with NiCl2, CoCl2 and CdCl2, and for KCl-NiCl2. With the exception of the system NaCl-NiCl2, all phase diagrams must be corrected.
Zusammenfassung Mit galvanischen Zellen des Typs (C+Cl2)/NaCl(s)/MCl2(s)/(C+Cl2) lassen sich oberhalb 280° EMK's messen, die auf der Bildung ternärer Chloride NanMCln+2 beruhen. Durch die Änderung der Steigung kontinuierlich gemessener EMK- gegen T-Kurven lassen sich in Systemen NaCl/MCl2 die Temperaturen von Festkörperreaktionen nachweisen. Diese Methode wurde auf die Systeme des NaCl mit NiCl2, CoCl2 und CdCl2 sowie auf das System KCl-NiCl2 angewendet. Alle Phasendiagramme, mit Ausnahme des Systems NaCl-NiCl2, mußten auf Grund dieser Messungen revidiert werden.

(C+Cl2)/NaCl./MCl2./(C +Cl2) 280 °C . . , NanMCln+2. . . , NaCl-MCl2. NaCl NiCl2, CoCl2, CdCl2 KCl-NiCl2. NaCl-NiCl2,ce .


This work was supported by the Deutsche Forschungsgemeinschaft and the Fonds der Chemischen Industrie.  相似文献   

7.
The catalytic (benzene hydrogenation) and adsorption (O2, CO) properties of NiO/Al2O3 and Ni(C5H7O2)2/Al2O3 reduced by trimethylaluminium and hydrogen have been studied. Significant differences in their catalytic and adsorption properties have been observed. The increased hydrogenation activity of catalysts reduced by trimethylaluminium is due to the increased reduction degree and dispersity of the active component.
( ) (O2, CO) NiO/Al2O3 Ni(C5H7O2)1/Al2O3, H2. . , , .
  相似文献   

8.
A series of complexes of the type (C6F5)ConLL 4B with tetradentate ligands (L 4=acacen (N,N'-ethylene-bis acetylacetoneiminate dianion), mesalen (N,N'-ethylene-bis-7, 7'-dimethylsalicylideneiminate dianion);B=H2O, NH3,py,ba, pip, en andL 4=dotH (diacetylmonoximeiminodiacetyl-monoximateiminopropane-1,3 monoanion),B== Br, I, CN) has been studied, using TG and DTA methods to obtain information concerning the decomposition mechanism and the influence of the ligands on the thermal stabilities of cobalt-carbon and cobalt-axial base bond.The elimination of the axial base leads to the formation of pentacoordinate complexes (C6F5)CoL 4 (whenL 4=acacen, mesalen) and their subsequent decomposition involves cobalt-carbon bond rupture to form CoL 4. In contrast, the latter reaction occurs first when the tetradentate ligand is dotnH.It has been observed that the stability of the cobalt-carbon bond is related to the nature of the equatorial ligands, and decreases in the order: mesalen > acacen > dotnH.
Zusammenfassung Eine Reihe von Komplexen des Type (C6F5)CoL 4 B mit Tetradentat-Liganden (L 4=Acacen(N-N'Äthylen-bis-Acetylacetoniminat-Dianion), Mesalen (N-N'Äthylen-bis-7-7'-Dimethylsalycilideniminat-Dianion);B= H2O, NH3,py, ba, pip, en undL 4== dotnH (Diacetylmonoxym-imino-diacetylmonoxymat-iminopropan 1,3 Monoanion)B== Br, I, CN) wurde mittels TG und DTA Methoden untersucht, um Informationen bezüglich des Zersetzungsmechanismus und des Einflusses der Eiganden auf die thermische Stabilität von Cobalt-Kohlenstoff- und Cobalt Axialbasenbindungen zu erhalten.Die Eliminierung der axialen Base führt zur Bildung von Pentakoordinat-Komplexen (C6F5)CoL 4 (wobeiL 4=Acacen, Mesalen) und ihre darauffolgende Zersetzung ist mit der Spaltung der Cobalt-Kohlenstoffbindung verbunden unter Bildung von CoL 4. Im Gegensatz hierzu verläuft die letztere Reaktion zuerst, falls der Tetradentat-Ligand dotnH ist.Es wurde beobachtet, daß die Stabilität von Kobalt-Kohlenstoffbindungen von der Art der äquatorialen Liganden abhängig ist und in der Reihenfolge Mesalen > Acacen > dotnH abnimmt.

Résumé Afin d'obtenir des données sur le mécanisme de décomposition et l'influence des ligands sur la stabilité thermique des liaisons à base axiale cobalt et carbone-cobalt, on a étudié par TG et ATD une série de complexes du type (C6F5)CoL 4B, avec des ligands tétradentés (L 4=acasène, mésalène;B=H2O, NH3,py, ba, pip, en etL 4= dotnH,B=Br, I, CN).L'élimination de la base axiale conduit à la formation de complexes pentacoordinés (C6F5)CoL 4 (oùL 4=acacène, mésalène) et leur décomposition subséquente fait intervenir la rupture de la liaison cobalt-carbone pour former CoL 4. Cette dernière réaction intervient au contraire en premier lieu si le ligand tétradenté est dotnH.On a observé que la stabilité de la liaison cobalt-carbone est en rapport avec la nature des ligands équatoriaux et diminue dans l'ordre suivant: mésalène > acacène > dotnH.

(C6F5)CoL 4B (L4= - N,N- - , — N,N -7,7- );N,N-7,7- ); =2, NH3, , ba, pip, en L4=dotnH - ---1,3; =, I, CN) , , - . - (C6F5)CoL4 L4=, , - - CoL4. , , dotnH. , - > > dotnH.
  相似文献   

9.
The degradation of a rocket insulator compound based on ethylene propylene diene rubber (EPDM) containing asbestor, cork and iron oxide (Fe2O3) as fillers has been studied at high temperature (up to 600°) by using differential thermal analysis (DTA) and thermogravimetry (TG). The changes in physical properties on high-temperature aging are also reported. EPDM gum vulcanizates involving different types of diene, namely ethylidene norbornene (ENB), dicyclopentadiene (DCPD) and 1,4-hexadiene (HD), were used. In each case, the kinetic parameters for degradation have been evaluated. From these data, the lifetime of the rocket insulator compound has been found.
Zusammenfassung Die Zersetzung einer Raketenisolator-Verbindung auf Äthylen-Propylen-Dien-Gummibasis (EPDM) mit Asbest, Kork und Eisenoxid (Fe2O3) als Füllstoffe wurden bei hohen Temperaturen (bis 600°) mittels Differentialthermalanalyse (DTA) und Thermogravimetrie (TG) untersucht. Die bei Hochtemperaturen eintretenden Veränderungen der physikalischen Eigenschaften sind ebenfalls angegeben. Verschiedene Typen von Dienen, nämlich Äthyliden-norbornen (ENB), Dicyclopentadien (DCPD) und 1,4-Hexadien (HD) enthaltenden EPDM-Gummivulkanisate waren Gegenstand der Untersuchung. In allen Fällen wurden die kinetischen Parameter der Zersetzung ermittelt. Aus diesen Daten wurde die Lebensdauer der Raketenisolator-Verbindung bestimmt.

600° (), , . , . , , 1,4- . . .


The authors are grateful to the Indian Space Research Organization for funding, and acknowledge the help and suggestions from Mr. T. S. Ram and Mr. Baby John, R.P.P., V.S.S.C., Trivandrum. The authors are also grateful to Prof. S. K. De, Rubber Technology Centre, and Prof. R. Ghosh, Chemistry Department, I.I.T., Kharagpur.

The authors thank Mr. Asutosh Ghosh, Indian Association for the Cultivation of Science, for experimental assistance.  相似文献   

10.
    
The heat of formation of the ethynyl radical has been estimated to be Hf(C2H)==504 kJ/mol from thermochemical data and the kinetic parameters of the reaction H+C2H2C2H+H2 in the forward and reverse direction.
C2H
H+C2H2C2H+H2, Hf (C2H)=504,0 /.
  相似文献   

11.
NaNO3 addition to Co/Al2O3 results in an increase in the reducibility, in a smaller dispersity of the metal and in a decrease in the ethane hydrogenolysis rate due to a decorative effect.
NaNO3 Co/Al2O3 ,
  相似文献   

12.
The non-empirical LCAO SCF MO method on the STO-3G basis was applied to calculate adsorption of H2O, NH3 and CO molecules on paired Lewis acid sites (LAS) of alumina formed as a result of the removal of the OH groups which are common for two aluminium atoms.
, STO-3G, H2O, NH3, CO () Al2O3, OH. , H2O, NH3, CO .
  相似文献   

13.
The interactions between gaseous sulfur dioxide and nickel oxide at 250° have been investigated by means of temperature-programmed desorption (TPD) and microcalorimetric techniques. Depending on the thermal treatment of the oxide, different NiO samples were prepared containing chemisorbed oxygen species, O1, O2, O3 and O4, with different energies. The calorimetric data indicated that the weakly-bound species O1 is the most reactive of the oxygen forms towards sulfur dioxide. In this case, the TPD curves (m/e=48 andm/e=32) show a new peak at 710°; this may be correlated with the desorption of a sulfur-containing compound, probably NiSO4, created by oxidation of sulfur according to the reaction SIVSVI. The regeneration of the species O1 has been studied as a function of the temperature of oxygen adsorption; the most favourable temperature for the sulfation of nickel oxide appears to be about 400°.
Zusammenfassung Die Wechselwirkung zwischen gasförmigen Schwefeldioxid und Nickeloxid bei 250° wurde mittels temperaturprogrammierter Desorption (TPD) und mikrokalorimetrischer Techniken untersucht. Abhängig von der thermischen Behandlung der Proben wurden verschiedene, die Sauerstoffspecies O1, O2, O3 und O4 mit unterschiedlichen Energien enthaltenden NiO-Proben hergestellt. Die kalorimetrischen Daten weisen darauf hin, dass die schwach gebundene Species O1 gegenüber Schwefeldioxid die reaktivste von diesen Sauerstoffarmen ist. In diesem Falle zeigt die TPD-Kurve (m/e=48 undm/e=32) einen neuen Peak bei 710°; das kann mit der Desorption einer schwefelhaltigen Verbindung, wahrscheinlich NiSO4, erklärt werden, die durch Oxydation von Schwefel entsprechend der Reaktion SIVSVI gebildet wird. Die Regeneration der Species O1 wurde in Abhängigkeit von der Temperatur der Sauerstoffadsorption untersucht; die günstigste Temperatur für die Überführung von Nickeloxid in das Sulfat scheint etwa 400° zu sein.

- 250° . , NiO, O1, O2, O3 O4 . , , O1 - . , - (/=48 32) 710°, , NiSO4 . O1 . , 400°.
  相似文献   

14.
The phase diagram of the La-S-O system at 1073 K was established with the vacuum seal technique. Six phases exist at this temperature: La2O3 (B-type), LaS2, La2S3, La2O2SO4, La2O2S and La2O2S2. The thermodynamic functions for the reaction La2O2SO4=La2O3+SO2+1/2 O2 were determined by using the emf method at temperatures from 1123 to 1373 K. The mechanisms of the oxidation reactions in the La-S-O system under different partial pressures of oxygen (–4.4 < log <–0.7) were also investigated by means of DTA, TG and powder X-ray diffractometry.
Zusammenfassung Das Phasendiagramm des La-S-O-Systems bei 1073 K wurde bestimmt. Bei dieser Temperatur liegen 6 Phasen vor, und zwar La2O3 (B-Typ), LaS2, La2S3, La2O2SO4, La2O2S und La2O2S2. Für die Reaktion La2O2SO4=La2O3+SO2+1/2 O2 wurden die thermodynamischen Funktionen im Temperaturbereich von 1123–1373 K nach der EMF-Methode bestimmt. DTA, TG und Pulver-Röntgendiffraktometrie wurden zur Untersuchung der Mechanismen der im La-S-O-System verlaufenden Oxydationsreaktionen herangezogen, wobei der Sauerstoffpartialdruck in den Grenzen von – 4.4 < log < <-0.7 variiert wurde.

La-S-O 1073 . : La2O3 (-), LaS2, La2S3, La2O2SO4, La2O2S La2O2S2. . . ., La2O2SO4=La2O3+ SO2+1/2 2 1123–1373. , La-S-O –4.4 < log < –0.7.
  相似文献   

15.
The effects of calcination temperature on structural and textural characteristics of two Greek bauxites were examined by different physicochemical techniques. Although the above minerals exhibited lower activity than a commercial CoMo/Al2O3 catalyst, they were evaluated as possible hydrotreating catalysts.
. , CoMo/Al2O3, , .
  相似文献   

16.
The thermal decompositions of the acetates of Pr, Nd, Sm, Gd and Ho have been investigated using thermogravimetry and differential thermal analysis, together with infrared spectroscopy and X-ray diffraction. The thermal decompositions of the acetates of the rare earth elements exhibit several stages, depending upon both the number of crystal water molecules in the acetates and the rare earth element behaviour. Experiments with the benzoates and abietates of Pr, Nd, Sm, Gd and Ho indicate some correlations in the thermal decompositions of carboxylates of the rare earth elements.
Zusammenfassung Die thermische Zersetzung der Acetate von Pr, Nd, Sm, Gd und Ho wurde durch Thermogravimetrie und Differentialthermoanalyse in Verbindung mit der Infrarotspektroskopie und Röntgendiffraktionsmethode untersucht. Die thermische Zersetzung der Acetate der seltenen Erden verläuft in mehreren Stufen, welche sowohl von der Zahl der Kristallwassermoleküle in den Acetaten als auch von dem Verhalten der seltenen Erden abhängen. Experimente mit den Benzoaten und Abietaten von Pr, Nd, Sm, Gd und Ho zeigen gewisse Abhängigkeiten von der thermischen Zersetzung der Carboxylate der seltenen Erden.

Résumé La décomposition thermique des acétates de Pr, Nd, Sm, Gd et Ho a été étudiée par thermogravimétrie et analyse thermique différentielle ainsi que par spectroscopie infrarouge et diffraction des rayons X. La décomposition thermique des acétates de terres rares se produit en plusieurs étapes qui dépendent à la fois du nombre de molécules d'eau de cristallisation de l'acétate et du comportement de l'élément des terres rares considéré. Des expériences effectuées avec les benzoates et abiétates de Pr, Nd, Sm, Gd et Ho montrent que la décomposition thermique des carboxylates dépend des éléments de terres rares considérés.

Pr, Nd, Sm, Gd , , - - . , , . Pr, Nd, Sm, Gd .
  相似文献   

17.
The thermal decomposition reactions of various hexanitrato uranium(IV) species, M2U(NO3)6 where M=Cs+, NEt 4 + , AsPh 4 + and PPh 4 + have been studied.The overall decomposition reaction can be described in terms of an oxidation-reduction reaction in which the nitrate oxidizes the uranium. The enthalpies of decomposition were found to be very similar, approximately 55 kJ mole–1 except for the PPh 4 + -salt which was only 27 kJ mole–1.The decomposition kinetics of all the compounds were studied and found to be complex — especially during the initial stages of the reaction.
Zusammenfassung Die thermischen Zersetzungsreaktionen verschiedener Hexanitratouran (IV)-Arten der Formel M2U(NO3)6 (M=Cs+, NEt 4 + , AsPh 4 + und PPh 4 + ) wurden untersucht.Die allgemeine Zersetzungsreaktion kann durch eine Oxidations-Reduktionsreaktion beschrieben werden, in der Uran durch Nitrat oxidiert wird. Die Zersetzungsenthalpien erwiesen sich als sehr ähnlich, annähernd 55 kJ. mol–1 mit Ausnahme des PPh 4 + -Salzes, dessen Wert nur 27 kJ. mol–1 betrug.Die Zersetzungskinetik sämtlicher Verbindungen wurde studiert und für komplex gefunden, besonders in den Anfangsstadien der Reaktion.

Résumé On a étudié la décomposition thermique des diverses espèces d'hexanitrate d'uranium IV de formule: M2U(NO3)6 (M=Cs+, NEt 4 + , AsPh 4 + et PPh 4 + ).La réaction générale de la décomposition peut être décrite par une réaction d'oxydo-réduction, dans laquelle le nitrate oxyde l'uranium. On a trouvé que les enthalpies de décomposition étaient très similaires, environ 55 kJ. mole–1, à l'exception du se! de PPh 4 + dont la valeur n'était que 27 kJ. mole–1.On a étudié la cinétique de décomposition de tous les composés. Elle est complexe, spécialement pendant les étapes initiales de la réaction.

oypaa(IV) M2U(NO3)6, M=Cs+, Et4N+, Ph4As+ Ph4P+. - , . , 55 .–1, Ph4P+ — , 27 .–1. , .
  相似文献   

18.
A desk computer program has been written in BASIC programming language to optimize the values of rate constants determined from kinetic measurements of time and concentration data. The program is capable of the simultaneous refinement of a maximum of 5 rate constants. A FORTRAN version using the Gear method is also available.
, BASIC , . 5 . FORTRAN .
  相似文献   

19.
The method of pulse photolysis has been used to determine termination rate constants of primary peroxy radicals in benzene at 295 K. Radicals CH3O 2 . have been found to decay with the rate constant 2k6=3.7×108 M–1 s–1 and radicals (CH3)3 COOC(CH3)CH2O 2 . with 2k8=1.2×108 M–1 s–1, the rate constant of cross-recombination for both radicals being 2.4×108 M–1 s–1.
295 K: CH3O 2 . 3,7·108 (M·c)–1, (CH3)3COOC(CH3)2CH2O 2 . =qt 1,2·108 (M·c)–1, 2,4·108 (M·c)–1.
  相似文献   

20.
Kinetics of the oxidation of D-altrose by Ce(IV) perchlorate has been studied in perchloric acid medium. At equivalent concentrations the overall order of the reaction is two, being unity in each reactant. The reaction is characterized by a primary positive kinetic salt effect. Perchloric acid has been found to enhance the rate, while the addition of the reaction products retards the rate. No evidence for initial complexation has been obtained. Thermodynamic parameters have been determined and a mechanism consistent with the observed results is proposed.
D- Ce(IV) . , . . , . . , .
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号