Effects of multiple pathways on excited-state energy flow in self-assembled wheel-and-spoke light-harvesting architectures

Static and time-resolved optical measurements are reported for three cyclic hexameric porphyrin arrays and their self-assembled complexes with guest chromophores. The hexameric hosts contain zinc porphyrins and 0, 1, or 2 free base (Fb) porphyrins (denoted Zn(6), Zn(5)Fb, or Zn(4)Fb(2), respectively). The guest is a core-modified (O replacing one of the four N atoms) dipyridyl-substituted Fb porphyrin (DPFbO) that coordinates to zinc porphyrins of a host via pyridyl-zinc dative bonding. Each architecture is designed to have a gradient of excited-state energies for excitation funneling among the weakly coupled constituents of the host to the guest. Energy transfer to the lowest-energy chromophore(s) (coordinated zinc porphyrins or Fb porphyrins) within a hexameric host occurs primarily via a through-bond (TB) mechanism, is rapid ( approximately 40 ps), and is essentially quantitative (>or=98%). Energy transfer from a pyridyl-coordinated zinc porphyrin of the host to the guest in the Zn(6)*DPFbO complex has a yield of approximately 75%, a rate constant of approximately (0.7 ns)(-1), and significant F?rster through-space (TS) character. In the case of Zn(5)Fb*DPFbO, which has an additional TS route via the Fb porphyrin with a rate constant of approximately (20 ns)(-1), the yield of energy transfer to the guest is somewhat lower ( approximately 50%) than that for Zn(6)*DPFbO. Complex Zn(4)Fb(2)*DPFbO has an identical TS pathway via the Fb porphyrin plus an additional TS pathway involving the second Fb porphyrin (closer to the guest) with a rate constant of approximately (0.5 ns)(-1). This complex exhibits an energy-transfer yield to the guest that is significantly enhanced over that for Zn(5)Fb*DPFbO and comparable to that for Zn(6)*DPFbO. Collectively, the results for the various arrays suggest designs for similar host-guest complexes that are expected to exhibit much more efficient light harvesting and excitation trapping at the central guest chromophore.     

Comparison of excited-state energy transfer in arrays of hydroporphyrins (chlorins, oxochlorins) versus porphyrins: rates, mechanisms, and design criteria

A set of chlorin-chlorin and oxochlorin-oxochlorin dyads has been prepared with components in the same or different metalation states. In each case a 4,4'-diphenylethyne linker spans the respective 10-position of each macrocycle. The dyads have been studied using static and time-resolved absorption and emission spectroscopy, resonance Raman spectroscopy, and electrochemical techniques. Excited-state energy transfer from a zinc chlorin to a free-base (Fb) chlorin occurs with a rate constant of (110 ps)(-1) and an efficiency of 93%; similar values of (140 ps)(-1) and 83% are found for the corresponding oxochlorin dyad. Energy transfer in both dyads is slower and less efficient than found previously for the analogous porphyrin dyad, which displays a rate of (24 ps)(-1) and a yield of 99%. The slower rates and diminished efficiencies in the ZnFb chlorin and oxochlorin dyads versus the ZnFb porphyrin dyad are attributed to substantially weaker linker-mediated through-bond (TB) electron-exchange coupling (as indicated by resonance Raman data). Although the through-space (TS, i.e., dipole-dipole) coupling in the ZnFb-chlorin and -oxochlorin dyads is enhanced relative to the ZnFb porphyrin dyad (as indicated by F?rster calculations), this enhancement is insufficient to compensate for the greatly diminished TB coupling. Taken together, the chlorin and oxochlorin dyads examined herein serve as benchmarks for elucidating the energy-transfer, electrochemical, and other properties of light-harvesting arrays containing multiple chlorins or oxochlorins.     

Excited-state energy-transfer dynamics of self-assembled imine-linked porphyrin dyads

Toward the development of new strategies for the synthesis of multiporphyrin arrays, we have prepared and characterized (electrochemistry and static/time-resolved optical spectroscopy) a series of dyads composed of a zinc porphyrin and a free base porphyrin joined via imine-based linkers. One dyad contains two zinc porphyrins. Imine formation occurs under gentle conditions without alteration of the porphyrin metalation state. Five imine linkers were investigated by combination of formyl, benzaldehyde, and salicylaldehyde groups with aniline and benzoic hydrazide groups. The imine-linked dyads are quite stable to routine handling. The excited-state energy-transfer rate from zinc to free base porphyrin ranges from (70 ps)(-)(1) to (13 ps)(-)(1) in toluene at room temperature depending on the linker employed. The energy-transfer yield is generally very high (>97%), with low yields of deleterious hole/electron transfer. Collectively, this work provides the foundation for the design of multiporphyrin arrays that self-assemble via stable imine linkages, have predictable electronic properties, and have comparable or even enhanced energy-transfer characteristics relative to those of other types of covalently linked systems.     

Mechanisms, pathways, and dynamics of excited-state energy flow in self-assembled wheel-and-spoke light-harvesting architectures

Static and time-resolved optical measurements are reported for two cyclic hexameric porphyrin arrays and their self-assembled complexes with guest chromophores. The hexameric hosts contain zinc porphyrins and 0 or 3 free base (Fb) porphyrins (denoted Zn(6) or Zn(3)Fb(3), respectively). The guests are a tripyridyl arene (TP) and a dipyridyl-substituted free base porphyrin (DPFb), each of which coordinates to zinc porphyrins of a host via pyridyl-zinc dative bonding. Each architecture is designed to have an overall gradient of excited-state energies that affords excitation funneling within the host and ultimately to the guest. Collectively, the studies delineate the various pathways, mechanisms, and rate constants of energy flow among the weakly coupled constituents of the host-guest complexes. The pathways include downhill unidirectional energy transfer between adjacent chromophores, bidirectional energy migration between identical chromophores, and energy transfer between nonadjacent chromophores. The energy transfer to the lowest-energy chromophore(s) within the backbone of a hexameric host (Fb porphyrins in Zn(3)Fb(3) or pyridyl-coordinated zinc porphyrins in Zn(6)*TP and Zn(6)*DPFb) proceeds primarily via a through-bond mechanism; the transfer is rapid (approximately 40 ps depending on the array) and essentially quantitative (>or=98%). The energy transfer from a pyridyl-coordinated zinc porphyrin of the host to the Fb porphyrin guest in the Zn(6)*DPFb complex is almost exclusively F?rster through-space in nature; this process is much slower ( approximately 1 ns) and has a lower yield (65%). These studies highlight the utility of cyclic architectures for efficient light harvesting and energy transfer to a designated trapping site.     

Swallowtail porphyrins: synthesis, characterization and incorporation into porphyrin dyads

The incorporation of symmetrically branched tridecyl ("swallowtail") substituents at the meso positions of porphyrins results in highly soluble building blocks. Synthetic routes have been investigated to obtain porphyrin building blocks bearing 1-4 swallowtail groups. Porphyrin dyads have been synthesized in which the zinc or free base (Fb) porphyrins are joined by a 4,4'-diphenylethyne linker and bear swallowtail (or n-pentyl) groups at the nonlinking meso positions. The swallowtail-substituted Zn(2)- and ZnFb-dyads are readily soluble in common organic solvents. Static absorption and fluorescence spectra and electrochemical data show that the presence of the swallowtail groups slightly raises the energy level of the filled a(2u)(pi) HOMO. EPR studies of the pi-cation radicals of the swallowtail porphyrins indicate that the torsional angle between the proton on the alkyl carbon and p-orbital on the meso carbon of the porphyrin is different from that of a porphyrin bearing linear pentyl groups. Regardless, the swallowtail substituents do not significantly affect the photophysical properties of the porphyrins or the electronic interactions between the porphyrins in the dyads. In particular, time-resolved spectroscopic studies indicate that facile excited-state energy transfer occurs in the ZnFb dyad, and EPR studies of the monocation radical of the Zn(2)-dyad show that interporphyrin ground-state hole transfer is rapid.     

Synthesis and excited-state photodynamics of perylene-porphyrin dyads. 4. Ultrafast charge separation and charge recombination between tightly coupled units in polar media

New perylene-porphyrin dyads that have excellent light-harvesting and energy-utilization capabilities in nonpolar media are found to exhibit efficient, ultrafast and tunable charge-transfer activity in polar media. The dyads consist of a perylene-monoimide dye (PMI) connected to a porphyrin (Por) via an ethynylphenyl (ep) linker. The porphyrin constituent of the PMI-ep-Por arrays is either a zinc or magnesium complex (Por = Zn or Mg) or a free-base form (Por = Fb). Following excitation of the perylene in each array in acetonitrile, PMI* decays in ≤0.4 ps by a combination of energy transfer to the ground-state porphyrin (forming Por*) and hole transfer (forming PMI^-Por⁺). The excited porphyrin formed by energy transfer (or via direct excitation) then undergoes effectively quantitative electron transfer back to the perylene (τ = 1, 1, 700 ps for Por = Mg, Zn, Fb). Subsequently, charge recombination within PMI^- Por⁺ returns each dyad quantitatively to the ground state (τ = 2, 4, 8 ps for Por = Mg, Zn, Fb). The dynamics of the PMI Por* → PMI^-Por⁺ and PMI^- Por⁺ → PMI Por charge-transfer processes can be modulated by altering the type of polar solvent (acetonitrile, benzonitrile, tetrahydrofuran and 2,6-lutidine). The charge-separation times for PMI-ep-Zn are 1, 6, 9 and 22 ps in these solvents, while the charge-recombination times are 4, 24, 38 and 34 ps. The efficient, rapid and tunable nature of the charge-transfer processes in polar media makes the PMI-ep-Por dyads useful units for performing molecular-switching functions. These properties when combined with the excellent light-harvesting and energy-transfer capabilities of the same arrays in nonpolar media afford a robust perylene-porphyrin motif that can be tailored for a variety of functions in molecular optoelectronics.     

Rational syntheses of cyclic hexameric porphyrin arrays for studies of self-assembling light-harvesting systems.

Two new cyclic hexameric arrays of porphyrins have been prepared in a rational, convergent manner. The porphyrins in each cyclic hexamer are joined by diphenylethyne linkers affording a wheel-like array with a diameter of approximately 35 A. One array is comprised of five zinc (Zn) porphyrins and one free base (Fb) porphyrin (cyclo-Zn(5)FbU) while the other is comprised of an alternating sequence of two Zn porphyrins and one Fb porphyrin (cyclo-Zn(2)FbZn(2)FbU). The prior synthesis employed a one-flask template-directed process and afforded alternating Zn and Fb porphyrins or all Zn porphyrins. More diverse metalation patterns are attractive for manipulating the flow of excited-state energy in the arrays. The rational synthesis of each array employed three Pd-mediated coupling reactions with four tetraarylporphyrin building blocks bearing diethynyl, diiodo, bromo/iodo, or iodo/ethynyl groups. The final ring closure yielding the cyclic hexamer was achieved by reaction of a porphyrin pentamer + porphyrin monomer or the joining of two porphyrin trimers. In the presence of a tripyridyl template, the yields of the 5 + 1 and 3 + 3 reactions ranged from 10 to 13%. The 5 + 1 reaction in the absence of the template proceeded in 3.5% yield, thereby establishing the structure-directed contribution to cyclic hexamer formation. The 3 + 3 route relied on successive ethyne + iodo/bromo coupling reactions. One template-directed route to cyclo-Zn(2)FbZn(2)FbU employed a magnesium porphyrin, affording cyclo-Zn(2)FbZn(2)MgU from which magnesium was selectively removed. The arrays exhibit absorption spectra that are nearly the sum of the spectra of the component parts, indicating weak electronic coupling. Fluorescence spectroscopy showed that the quantum yield of energy transfer in toluene at room temperature from the Zn porphyrins to the Fb porphyrin(s) was 60% in cyclo-Zn(5)FbU and 90% in cyclo-Zn(2)FbZn(2)FbU. Two dipyridyl-substituted porphyrins, a Zn tetraarylporphyrin and a Fb oxaporphyrin, have been synthesized for use as guests in the cyclic hexamers, affording self-assembled arrays for light-harvesting studies.     

Synthesis and excited-state photodynamics of a chlorin-bacteriochlorin dyad--through-space versus through-bond energy transfer in tetrapyrrole arrays.

Understanding energy transfer among hydroporphyrins is of fundamental interest and essential for a wide variety of photochemical applications. Toward this goal, a synthetic free base ethynylphenylchlorin has been coupled with a synthetic free base bromobacteriochlorin to give a phenylethyne-linked chlorin-bacteriochlorin dyad (FbC-pe-FbB). The chlorin and bacteriochlorin are each stable toward adventitious oxidation because of the presence of a geminal dimethyl group in each reduced pyrrole ring. A combination of static and transient optical spectroscopic studies indicate that excitation into the Qy band of the chlorin constituent (675 nm) of FbC-pe-FbB in toluene results in rapid energy transfer to the bacteriochlorin constituent with a rate of approximately (5 ps)(-1) and efficiency of >99%. The excited bacteriochlorin resulting from the energy-transfer process in FbC-pe-FbB has essentially the same fluorescence characteristics as an isolated monomeric reference compound, namely a narrow (12 nm fwhm) fluorescence emission band at 760 nm and a long-lived (5.4 ns) Qy excited state that exhibits a significant fluorescence quantum yield (Phif=0.19). F?rster calculations are consistent with energy transfer in FbC-pe-FbB occurring predominantly by a through-space mechanism. The energy-transfer characteristics of FbC-pe-FbB are compared with those previously obtained for analogous phenylethyne-linked dyads consisting of two porphyrins or two oxochlorins. The comparisons among the sets of dyads are facilitated by density functional theory calculations that elucidate the molecular-orbital characteristics of the energy donor and acceptor constituents. The electron-density distributions in the frontier molecular orbitals provide insights into the through-bond electronic interactions that can also contribute to the energy-transfer process in the different types of dyads.     

Weakly coupled molecular photonic wires: synthesis and excited-state energy-transfer dynamics

Molecular photonic wires, which absorb light and undergo excited-state energy transfer, are of interest as biomimetic models for photosynthetic light-harvesting systems and as molecular devices with potential applications in materials chemistry. We describe the stepwise synthesis of four molecular photonic wires. Each wire consists of an input unit, transmission element, and output unit. The input unit consists of a boron-dipyrrin dye or a perylene-monoimide dye (linked either at the N-imide or the C9 position); the transmission element consists of one or three zinc porphyrins affording short or long wires, respectively; and the output unit consists of a free base (Fb) porphyrin. The components in the arrays are joined in a linear architecture via diarylethyne linkers (an ethynylphenyl linker is attached to the C9-linked perylene). The wires have been examined by static absorption, static fluorescence, and time-resolved absorption spectroscopy. Each wire (with the exception of the C9-linked perylene wire) exhibits a visible absorption spectrum that is the sum of the spectra of the component parts, indicating the relatively weak electronic coupling between the components. Excitation of each wire at the wavelength where the input unit absorbs preferentially (typically 480-520 nm) results in emission almost exclusively from the Fb porphyrin. The static emission and time-resolved data indicate that the overall rate constants and quantum efficiencies for end-to-end (i.e., input to output) energy transfer are as follows: perylene-(N-imide)-linked short wire, (33 ps)(-1) and >99%; perylene-(C9)-linked short wire, (26 ps)(-1) and >99%; boron-dipyrrin-based long wire, (190 ps)(-1) and 81%; perylene-(N-imide)-linked long wire, (175 ps)(-1) and 86%. Collectively, the studies provide valuable insight into the singlet-singlet excited-state energy-transfer properties in weakly coupled molecular photonic wires.     

Ultrafast charge separation in a photoreactive rhenium-appended porphyrin assembly monitored by picosecond transient infrared spectroscopy

Rhenium(bipyridine)(tricarbonyl)(picoline) units have been linked covalently to tetraphenylmetalloporphyrins of magnesium and zinc via an amide bond between the bipyridine and one phenyl substituent of the porphyrin. The resulting complexes, abbreviated as [Re(CO)(3)(Pic)Bpy-MgTPP][OTf] and [Re(CO)(3)(Pic)Bpy-ZnTPP][OTf], exhibit no signs of electronic interaction between the Re(CO)(3)(bpy) units and the metalloporphyrin units in their ground states. However, emission spectroscopy reveals solvent-dependent quenching of porphyrin emission on irradiation into the long-wavelength absorption bands localized on the porphyrin. The characteristics of the excited states have been probed by picosecond time-resolved absorption (TRVIS) spectroscopy and time-resolved infrared (TRIR) spectroscopy in nitrile solvents. The presence of the charge-separated state involving electron transfer from MgTPP or ZnTPP to Re(bpy) is signaled in the TRIR spectra by a low-frequency shift in the nu(CO) bands of the Re(CO)(3) moiety similar to that observed by spectroelectrochemical reduction. Long-wavelength excitation of [Re(CO)(3)(Pic)Bpy-MTPP][OTf] results in characteristic TRVIS spectra of the S(1) state of the porphyrin that decay with a time constant of 17 ps (M = Mg) or 24 ps (M = Zn). The IR bands of the CS state appear on a time scale of less than 1 ps (Mg) or ca. 5 ps (Zn) and decay giving way to a vibrationally excited (i.e., hot) ground state via back electron transfer. The IR bands of the precursors recover with a time constant of 35 ps (Mg) or 55 ps (Zn). The short lifetimes of the charge-transfer states carry implications for the mechanism of reaction in the presence of triethylamine.     

Probing Ground-state Hole Transfer Between Equivalent, Electrochemically Inaccessible States in Multiporphyrin Arrays Using Time-resolved Optical Spectroscopy

A new strategy is described and implemented for determining the rates of hole‐transfer between equivalent porphyrins in multiporphyrin architectures. The approach allows access to these rates between sites that are not the most easily oxidized components of the array. The specific architectures investigated with this new strategy are triads consisting of one zinc porphyrin (Zn) and two free base porphyrins (Fb). The triads employ a diphenylethyne linker ( ZnFbFbU ) and a phenylene linker ( ZnFbFbΦ ). The zinc porphyrin is selectively oxidized to produce Zn ⁺ FbFb, the free base porphyrins are excited to produce the excited‐state mixture Zn ⁺ Fb*Fb and Zn ⁺ FbFb*, and the subsequent dynamics are monitored by ultrafast absorption spectroscopy. The system evolves by a combination of energy‐ and hole‐transfer processes involving (adjacent and nonadjacent) zinc and free base porphyrin constituents that are complete within 100 ps of excitation; the rate constants of many of these processes are derived from prior studies of the oxidized forms of the benchmark dyads ( ZnFbU and ZnFbΦ ). One of the excited‐state decay channels produces the metastable state ZnFbFb ⁺ that decays to a second metastable state ZnFb ⁺ Fb by the target hole‐transfer process, followed by rapid hole transfer to produce the Zn ⁺ FbFb thermodynamic ground state of the system. The rate constant for hole transfer between the free base porphyrins in the oxidized ZnFbFb triads is found to be (0.5 ns)^?1 and (0.6 ns)^?1 across phenylene and diphenylethyne linkers, respectively. These rate constants are comparable to those recently measured, using a related but distinct strategy, for ground‐state hole transfer between zinc porphyrins in oxidized ZnZnFb triads. The two complementary strategies provide unique approaches for probing hole transfer between equivalent sites in multiporphyrin arrays, with the choice of method being guided by the particular target process and the ease of synthesis of the necessary architectures.     

Syntheses, photophysical properties, and application of through-bond energy-transfer cassettes for biotechnology

We have designed fluorescent "through-bond energy-transfer cassettes" that can harvest energy of a relatively short wavelength (e.g., 490 nm), and emit it at appreciably longer wavelengths without significant loss of intensity. Probes of this type could be particularly useful in biotechnology for multiplexing experiments in which several different outputs are to be observed from a single excitation source. Cassettes 1-4 were designed, prepared, and studied as model systems to achieve this end. They were synthesized through convergent routes that feature coupling of specially prepared fluorescein- and rhodamine-derived fragments. The four cassettes were shown to emit strongly, with highly efficient energy transfer. Their emission maxima cover a broad range of wavelengths (broader than the four dye cassettes currently used for most high-throughput DNA sequencing), and they exhibit faster energy-transfer rates than a similar through-space energy-transfer cassette. Specifically, energy-transfer rates in these cassettes is around 6-7 ps, in contrast to a similar through-space energy-transfer system shown to have a decay time of around 35 ps. Moreover, the cassettes are considerably more stable to photobleaching than fluorescein, even though they each contain fluorescein-derived donors. This was confirmed by bulk fluorescent measurements, and in single-molecule-detection studies. Modification of a commercial automated DNA-sequencing apparatus to detect the emissions of these four energy-transfer cassettes enabled single-color dye-primer sequencing.     

Porphyrin dyads bearing carbon tethers for studies of high-density molecular charge storage on silicon surfaces

Redox-active molecules that afford high charge density upon attachment to an electroactive surface are of interest for use in molecular-based information-storage applications. One strategy for increasing charge density is to covalently link a second redox center to the first in an architecture that uses the vertical dimension in essentially the same molecular footprint. Toward this end, a set of four new porphyrin dyads have been prepared and characterized. Each dyad consists of two zinc porphyrins, an intervening linker (p-phenylene or 4,4'-diphenylethyne), and a surface attachment group (ethynyl or triallyl group). The porphyrin dyads were attached to an electroactive Si(100) surface and interrogated via electrochemical and FTIR techniques. The charge density obtainable for the ethynyl-functionalized porphyrin dyads is approximately double that observed for an analogously functionalized monomer, whereas that for the triallyl-functionalized dyads is at most 40% larger. These results indicate that the molecular footprint of the former dyads is similar to that of a monomer while that of the latter dyads is larger. For both the ethynyl- and triallyl-functionalized porphyrin dyads, higher charge densities (smaller molecular footprints) are obtained for the molecules containing the 4,4'-diphenylethyne versus the p-phenylene linker. This feature is attributed to the enhanced torsional flexibility of the former linker compared with that of the latter, which affords better packed monolayers. The FTIR studies indicate that the adsorption geometry of all the dyads is qualitatively similar and similar to that of monomers. However, the dyads containing the 4,4'-diphenylethyne linker sit somewhat more upright on the surface than those containing the p-phenylene linker, generally consistent with the smaller molecular footprint for the former dyads. Collectively, the high surface charge density (34-58 muC.cm(-)(2)) of the porphyrin dyads makes these constructs viable candidates for molecular-information-storage applications.     

Synthesis of cyclic hexameric porphyrin arrays. Anchors for surface immobilization and columnar self-assembly

To investigate new architectures for the self-assembly of multiporphyrin arrays, a one-flask synthesis of a shape-persistent cyclic hexameric array of porphyrins was exploited to prepare six derivatives bearing diverse pendant groups. The new arrays contain 6-12 carboxylic acid groups, 12 amidino groups, 6 thiol groups, or 6 thiol groups and 6 carboxylic acid groups in protected form (S-acetylthio, TMS-ethyl, TMS-ethoxycarbonyl). The arrays contain alternating Zn and free base (Fb) porphyrins or all Zn porphyrins. The one-flask synthesis entails a template-directed, Pd-mediated coupling of a p/p'-substituted diethynyl Zn porphyrin and a m/m'-substituted diiodo Fb porphyrin. The porphyrin building blocks (trans-A(2)B(2), trans-AB(2)C) contain the protected pendant groups at nonlinking meso positions. A self-assembled monolayer (SAM) of a Zn(3)Fb(3) cyclic hexamer containing one thiol group on each porphyrin was prepared on a gold electrode and the surface-immobilized architecture was examined electrochemically. Together, the work reported herein provides cyclic hexameric porphyrin arrays for studies of self-assembly in solution or on surfaces.     

Formation of porphyrins in the presence of acid-labile metalloporphyrins: a new route to mixed-metal multiporphyrin arrays

The ability to incorporate distinct metalloporphyrins at designated sites in multiporphyrin arrays is essential for diverse applications in materials and biomimetic chemistry. The synthesis of such mixed-metal arrays via acid catalyzed reactions has largely been restricted to metalloporphyrins of stability class II (e.g., Cu, Co, Ni) or I. We describe routes for the rational synthesis of mixed-metal arrays via acid-catalyzed condensations that are compatible with metalloporphyrins of stability class III (e.g., Zn) and IV (e.g., Mg). The routes are demonstrated for p-phenylene-linked arrays. The key finding is that several mild Lewis acids [InCl(3), Sc(OTf)(3), Yb(OTf)(3), and Dy(OTf)(3)], which are known to catalyze the dipyrromethane + dipyrromethane-dicarbinol condensation in CH(2)Cl(2) at room temperature without acidolysis, do not demetalate zinc or magnesium porphyrins under the same conditions. Rational routes to porphyrin dyads and triads employ reaction of a (porphyrin)-dipyrromethane and a (porphyrin)-dipyrromethane-dicarbinol. The porphyrin-forming reactions (six examples) proceed in yields of 18-28%. The metalation states of the arrays prepared in this manner include Zn-free base (ZnFb), MgFb, ZnFbMg, ZnFbZn, and ZnFbFb. Studies of the catalysis process indicate that the dipyrromethane + dipyrromethane-dicarbinol condensation is catalyzed by both the Lewis acid and a Br?nsted acid derived in situ from the Lewis acid. Taken together, the ability to employ otherwise "acid-labile" metalloporphyrins as precursors in condensation procedures should broaden the scope of accessible mixed-metal multiporphyrin arrays and motivate further studies of the application of mild Lewis acid catalysts in porphyrin chemistry.     

Synthesis, characterization, and preliminary intramolecular energy transfer studies of rigid, emissive, rhenium-linked porphyrin dimers

The reaction of pyridyl functionalized porphyrins with Re(CO)(5)Cl in THF results in the formation of porphyrin dimers which, despite incorporation of rhenium into the assemblies, remain fluorescent. The rigid compounds provide an efficient geometry and/or orbital pathway for singlet energy transfer, rendering these compounds suitable, in principle, for the study of both through-bond and through-space energy transfer. Derivatives containing both metallated and freebase porphyrins connected via the metal corners display efficient porphyrin-porphyrin energy transfer. The photophysical properties of the assemblies have been studied by both steady-state and time-resolved fluorescence techniques, yielding approximate rates and efficiencies for porphyrin-porphyrin energy transfer.     

Examination of chlorin-bacteriochlorin energy-transfer dyads as prototypes for near-infrared molecular imaging probes

Abstract New classes of synthetic chlorin and bacteriochlorin macrocycles are characterized by narrow spectral widths, tunable absorption and fluorescence features across the red and near-infrared (NIR) regions, tunable excited-state lifetimes (<1 to >10 ns) and chemical stability. Such properties make dyad constructs based on synthetic chlorin and bacteriochlorin units intriguing candidates for the development of NIR molecular imaging probes. In this study, two such dyads (FbC-FbB and ZnC-FbB) were investigated. The dyads contain either a free base (Fb) or zinc (Zn) chlorin (C) as the energy donor and a free base bacteriochlorin (B) as the energy acceptor. In both constructs, energy transfer from the chlorin to bacteriochlorin occurs with a rate constant of approximately (5 ps)(-1) and a yield of >99%. Thus, each dyad effectively behaves as a single chromophore with an exceptionally large Stokes shift (85 nm for FbC-FbB and 110 nm for ZnC-FbB) between the red-region absorption of the chlorin and the NIR fluorescence of the bacteriochlorin (lambda(f) = 760 nm, Phi(f) = 0.19, tau approximately 5.5 ns in toluene). The long-wavelength transitions (absorption, emission) of each constituent of each dyad exhibit narrow (相似文献   

Efficient excitation energy transfer in long meso-meso linked Zn(II) porphyrin arrays bearing a 5,15-bisphenylethynylated Zn(II) porphyrin acceptor

Electronically coupled porphyrin arrays are suitable for artificial light harvesting antenna in light of a large absorption cross-section and fast excitation energy transfer (EET). Along this line, an artificial energy transfer model system has been synthesized, comprising of an energy donating meso-meso linked Zn(II) porphyrin array and an energy accepting 5,15-bisphenylethynylated Zn(II) porphyrin linked via a 1,4-phenylene spacer. This includes an increasing number of porphyrins in the meso-meso linked Zn(II) porphyrin array, 1, 2, 3, 6, 12, and 24 (Z1A, Z2A, Z3A, Z6A, Z12A, and Z24A). The intramolecular singlet-singlet EET processes have been examined by means of the steady-state and time-resolved spectroscopic techniques. The steady-state fluorescence comes only from the acceptor moiety in Z1A-Z12A, indicating nearly the quantitative EET. In Z24A that has a molecular length of ca. 217 A, the fluorescence comes largely from the acceptor moiety but partly from the long donor array, indicating that the intramolecular EET is not quantitative. The transient absorption spectroscopy has provided the EET rates in real time scale: (2.5 ps)(-1) for Z1A, (3.3 ps)(-1) for Z2A, (5.5 ps)(-1) for Z3A, (21 ps)(-1) for Z6A, (63 ps)(-1) for Z12A, and (108 ps)(-1) for Z24A. These results have been well explained by a revised F?rster equation (Sumi formula), which takes into account an exciton extending coherently over several porphyrin pigments in the donor array, whose length is not much shorter than the average donor-acceptor distance. Advantages of such strongly coupled porphyrin arrays in light harvesting and transmission are emphasized in terms of fast EET and a large absorption cross-section for incident light.     

Highly linear self-assembled porphyrin wires

An efficient noncovalent assembly process involving high geometrical control was applied to a linear bis(imidazolyl zinc porphyrin) 7Zn, bearing C(18) substitutents, to generate linear multiporphyrin wires. The association process is based on imidazole recognition within the cavity of the phenanthroline-strapped zinc porphyrin. In chlorinated solvents, discrete soluble oligomers were obtained after (7Zn)(n) was end-capped with a terminal single imidazolyl zinc porphyrin derivative 4Zn. These soluble species, as well as their destabilization in the presence of protic solvents, were studied by UV-visible and time-resolved luminescence. In the solid state, assemblies as long as 480 nm, which corresponds to 190 iterative units or a total of 380 porphyrins, were observed by atomic force microscopy measurements on mica. The length and linearity of the porphyrin wires obtained illustrate the potential of phenanthroline-strapped porphyrins for the directional control of self-assembly processes.     

The photoinduced electron transference of porphyrin-anthraquinone dyads bridged with different lengths of links

The photoinduced electron transference (PET) interaction in porphyrin containing donor-acceptor (D-A) molecules is of great importance in nature and a significant part of the PET research has been devoted to the study of its mechanism ("through-space" or "through-bond") in these decades. Herein we synthesized a series of covalently linked porphyrin-anthraquinone dyads (Por-C(n)-AQ) bridged with flexible alkoxy chains at different lengths (n=1, 4, 10) and investigated their intramolecular PET using a combination of electronic absorption, steady-state fluorescence and decayed luminescence spectra. The experimental results show that the PET efficiency depends on the length of the flexible linkage between the porphyrin and anthraquinone moieties. Meanwhile, theoretical calculation applying the density functional theory (DFT) was also carried out to give the frontier orbital distribution and the optimized structures of these dyads. It is found that the orientation of the dyad with high PET efficiency is disadvantageous to π-π interaction. Thus, the PET of these dyads seemingly is best compatible with a "through-bond" (superexchange) mechanism.