Fabrication of hollow spheres of metal oxide using fructose-derived carbonaceous spheres as sacrificial templates

In this report, fructose-derived carbonaceous spheres were utilized as sacrificial templates for the fabrication of metal oxide hollow spheres (MOHSs) by a facile hydrothermal approach. Hollow spheres of a series of crystalline metal oxides (α-Fe₂O₃, Cr₂O₃, Co₃O₄, NiO, and ZnO) have been fabricated, utilizing the metal chloride as the oxide precursors. Heating of an aqueous solution of the metal chloride and fructose to moderate temperature in an autoclave affords a spherical composite consisting of a metal precursor shell sheathing a carbonaceous core. Subsequent removal of the interior carbonaceous cores by thermal treatment through oxidation in air produces free-standing crystalline oxides hollow spheres. The MOHSs were characterized by means of SEM, TEM, XRD, IR spectroscopy, energy dispersive X-ray (EDX) and sorption measurements. The results show convincingly that using fructose as a sacrificial template after application of a hydrothermal synthesis route could be a favourable sacrificial template for the fabrication of various MOHSs.     

Understanding and Manipulating Inorganic Materials with Scanning Probe Microscopes

Scanning probe microscopies, such as scanning tunneling microscopy and atomic force microscopy, are uniquely powerful tools for probing the microscopic properties of surfaces. If these microscopies are used to study low-dimensional materials, from two-dimensional solids such as graphite to zero-dimensional nanostructures, it is possible to elucidate atomic-scale structural and electronic properties characteristic of the bulk of a material and not simply the surface. By combining such measurements with chemical synthesis or direct manipulation it is further possible to elucidate relationships between composition, structure, and physical properties, thus promoting an understanding of the chemical basis of material properties. This article illustrates that the combination of scanning probe microscopies and chemical synthesis has advanced our understanding of charge density waves, high-temperature superconductivity, and nanofabrication in low-dimensional materials. This new approach to studying materials has directly contributed to our knowledge of how metal dopants interact with charge density waves and elucidated the local crystal chemistry of complex copper oxides, microscopic details of the superconducting states in materials with a high superconducting transition I_c, and new approaches to the fabrication of multi-component nanostructures. Coupling scanning probe microscopy measurement and manipulation with chemical synthesis should provide an approach to understanding material properties and creating complex nanostructures in general.     

Fabrication, characterisation and voltammetric studies of gold amalgam nanoparticle modified electrodes.

The tabrication, characterisation, and electroanalytical application of gold and gold amalgam nanoparticles on glassy carbon electrodes is examined. Once the deposition parameters for gold nanoparticle electrodes were optimised, the analytical utility of the electrodes was examined in CrIII electroanalysis. It was found that gold nanoparticle modified (Au-NM) electrodes possess higher sensitivity than gold macroelectrodes. In addition, gold amalgam nanoparticle modified (AuHg-NM) electrodes were fabricated and characterised. The response of those electrodes was recorded in the presence of important environmental analytes (heavy metal cations). It was found AuHg-NM electrodes demonstrate a unique voltammetric behaviour and can be applied for electroanalysis when enhanced sensitivity is crucial.     

Nonenzymatic glucose detection by using a three-dimensionally ordered, macroporous platinum template

A three-dimensionally ordered, macroporous, inverse-opal platinum film was synthesized electrochemically by the inverted colloidal-crystal template technique. The inverse-opal film that contains platinum nanoparticles showed improved electrocatalytic activity toward glucose oxidation with respect to the directly deposited platinum; this improvement is due to the interconnected porous structure and the greatly enhanced effective surface area. In addition, the inverse-opal Pt-film electrode responds more sensitively to glucose than to common interfering species of ascorbic acid, uric acid, and p-acetamidophenol due to their different electrochemical reaction mechanisms. Results showed that the ordered macroporous materials with enhanced selectivity and sensitivity are promising for fabrication of nonenzymatic glucose biosensors.     

Tailored Porous Silicon Microparticles: Fabrication and Properties

The use of mesoporous silicon particles for drug delivery has been widely explored thanks to their biodegradability and biocompatibility. The ability to tailor the physicochemical properties of porous silicon at the micro‐ and nanoscale confers versatility to this material. A method for the fabrication of highly reproducible, monodisperse, mesoporous silicon particles with controlled physical characteristics through electrochemical etching of patterned silicon trenches is presented. The particle size is tailored in the micrometer range and pore size in the nanometer range, the shape from tubular to discoidal to hemispherical, and the porosity from 46 to over 80 %. In addition, the properties of the porous matrix are correlated with the loading of model nanoparticles (quantum dots) and their three‐dimensional arrangement within the matrix is observed by transmission electron microscopy tomography. The methods developed in this study provide effective means to fabricate mesoporous silicon particles according to the principles of rational design for therapeutic vectors and to characterize the distribution of nanoparticles within the porous matrix.     

Recent advances in scanning electrochemical microscopic analysis and visualization on lithium-ion battery electrodes

Scanning electrochemical microscopy is a family of techniques that probes the local electrochemical surface environments with micrometer- and nanometer-scale space resolution and sub-picoampere chemical sensitivity. A recent growing trend uses these probes to investigate surface systems related to lithium-ion batteries, yielding a prodigious amount of new information. In this review, we give an overview of the recent progress on the scanning electrochemical microscopy and related techniques’ breakthroughs on lithium-ion battery electrodes research.     

Single magnetic adsorbates on s-wave superconductors

In superconductors, magnetic impurities induce a pair-breaking potential for Cooper pairs, which locally affects the Bogoliubov quasiparticles and gives rise to Yu-Shiba-Rusinov (YSR or Shiba, in short) bound states in the density of states (DoS). These states carry information on the magnetic coupling strength of the impurity with the superconductor, which determines the many-body ground state properties of the system. Recently, the interest in Shiba physics was boosted by the prediction of topological superconductivity and Majorana modes in magnetically coupled chains and arrays of Shiba impurities.Here, we review the physical insights obtained by scanning tunneling microscopy into single magnetic adsorbates on the s-wave superconductor lead (Pb). We explore the tunneling processes into Shiba states, show how magnetic anisotropy affects many-body excitations, and determine the crossing of the many-body ground state through a quantum phase transition. Finally, we discuss the coupling of impurities into dimers and chains and their relation to Majorana physics.     

Facile synthesis of ordered magnetic mesoporous gamma-Fe2O3/SiO2 nanocomposites with diverse mesostructures

On the basis of a sol–gel process, a facile, low cost, and one-step approach for preparing ordered magnetic mesoporous γ-Fe₂O₃/SiO₂ nanocomposites by an evaporation-induced self-assembly (EISA) approach is presented. Various mesostructured silica materials (P6mm or Im3m) incorporated with different amounts of iron oxide (n_Si/n_Fe=9/1, 8/2, 7/3, respectively) were synthesized and characterized by XRD, TEM, N₂-sorption analyses, and superconducting quantum interference device (SQUID) magnetometer. The HCl-leaching experiments together with TEM micrographs and nitrogen sorption analysis suggested that most of the γ-Fe₂O₃ domains of several nanometers were embedded in the silica walls, rather than dispersed in the mesopores, which could cause the significant pore clogging reported in some studies. The release behaviors of lysozyme from these magnetic porous nanocomposites were investigated for the possible application of drug targeting and control release. The influence of iron precursors was also studied and a possible mechanism was proposed. The hydrolysis of Fe³⁺ ions under weakly acidic conditions and the induced formation of SiOFe bonds may account for the synthesis of this kind of nanocomposite. These multifunctional nanostructured materials would have a wide range of applications in toxin removal, catalysis, waste remediation, and biological separation as well as novel drug-carrier technologies.     

Fabrication of tunable microreactor with enzyme modified magnetic nanoparticles for microfluidic electrochemical detection of glucose

A microfluidic device was designed for amperometric determination of glucose by packing enzyme modified magnetic nanoparticles (MNPs) in its microchannel as an enzyme microreactor. Glucose oxidase was covalently attached to the surface of MNPs and localized in the microchannel by the help of an external magnetic field, leading to a tunable packing length. By changing the length of microreactor from 3 to 10 mm, the performance for glucose detection was optimized. The optimal linear range to glucose was from 25 μM to 15 mM with a detection limit of 11 μM at a length of 6 mm. The inter- and intra-day precisions for determination of 1.0 mM glucose were 0.8% and 1.7%, respectively, and the device-to-device reproducibility was 95.6%. The enzyme reactor remained its 81% activity after three-week storage. Due to the advantages of the device and fracture sampling technique, serum samples could be directly sampled through the fracture to achieve baseline separation from ascorbic acid, and proteins in the samples did not interfere with the detection. This work provided a promising way for pretreatment-free determination of glucose with low cost and excellent performance.     

Imaging and Analysis of Surfaces with a Scanning Electron Microscope and Electron Spectrometer

The topography and the composition of a surface are in many cases of equal importance (catalysis, electroplating, pretreatment of foils and sheet metal, corrosion, passivation, adsorption, coating of fibers, etc.), and this explains the great interest in methods of investigation that reveal both. If the demands on the resolving power, the analytical possibilities, and the thickness of the surface layer are not too exacting, combined devices like the scanning electron microscope and its analytical accessories can be used. When it is necessary to avoid the compromises involved in simultaneous imaging and analysis, the investigations must be carried out with separate equipment. As an example of a method for the analysis of surfaces we consider briefly photo- and Auger electron spectroscopy (ESCA).     

单细胞成像分析研究进展

本文综述了近年来单细胞成像分析方法的研究进展。重点讨论了图像细胞光度测量、荧光显微成像、红外(近红外)与拉曼显微成像、磁共振成像和扫描探针显微镜成像等技术,并展望了单细胞成像的发展前景。     

Impacts of Forced Convection Generated via High Precision Stirring on Scanning Electrochemical Microscopy Experiments in Feedback Mode

In this study, the effects of forced convection on scanning electrochemical microscopy (SECM) experiments in feedback mode using ferrocenemethanol as redox mediator are presented. Forced convection, which enhances the mass transfer inside the system, was generated via an electrical high precision stirrer integrated into the SECM setup. A thin‐film interdigitated array electrode serving as model substrate was investigated with probe scan curves in z‐direction and SECM imaging in constant height mode utilizing ultramicroelectrodes (UME) with diameters (d_probe) of 25 μm and 12.5 μm. It was found that forced convection increased the overall current during SECM imaging without distorting distinctive features of the imaged structure when working with a 25 μm UME at substrate‐to‐tip distances of 14 μm and 11 μm. Furthermore, the electrochemical contrast was improved under hydrodynamic conditions for a substrate‐to‐tip distance of 11 μm and scan rates of 5 μm s^?1, 10 μm s^?1, 20 μm s^?1 and 40 μm s^?1. When further decreasing the gap between the UME and the substrate to 9 μm almost no effects of the forced convection were observed. Consequently, for a 25 μm UME, forced convection led to higher currents and improved performance during SECM experiments in feedback mode at substrate‐to‐tip distances of 14 μm and 11 μm, whereas no effects were observed for a 12.5 μm UME at a distance of 8 μm.     

In situ scanning probe microscopy and new perspectives in analytical chemistry

The resolution of scanning tunnelling microscopy (STM) and other scanning probe microscopies is unprecedented but the techniques are fraught with limitations as analytical tools. These limitations and their relationship to the physical mechanisms of image contrast are first discussed. Some new options based on in situ STM, which hold prospects for molecular- and mesoscopic-scale analytical chemistry, are then reviewed. They are illustrated by metallic electro-crystallisation and -dissolution, and in situ STM spectroscopy of large redox molecules. The biophysically oriented analytical options of in situ atomic force microscopy, and analytical chemical perspectives for the new microcantilever sensor techniques are also discussed.     

Fabrication of nanoporous nanocomposites entrapping Fe3O4 magnetic nanoparticles and oxidases for colorimetric biosensing

A nanostructured multicatalyst system consisting of Fe(3)O(4) magnetic nanoparticles (MNPs) as peroxidase mimetics and an oxidative enzyme entrapped in large-pore-sized mesoporous silica has been developed for convenient colorimetric detection of biologically important target molecules. The construction of the nanocomposites begins with the incorporation of MNPs on the walls of mesocellular silica pores by impregnating Fe(NO(3))(3)·9H(2)O, followed by the immobilization of oxidative enzymes. Glutaraldehyde crosslinking was employed to prevent enzymes leaching from the pores and led to over 20 wt% loading of the enzyme. The oxidase in the nanocomposite generates H(2)O(2) through its catalytic action for target molecules and subsequently activates MNPs to convert selected substrates into colored products. Using this strategy, two different biosensing systems were constructed employing glucose oxidase and cholesterol oxidase and their analytical capabilities were successfully verified by colorimetrically detecting the corresponding target molecules with excellent selectivity, sensitivity, reusability, and stability. Future potential applications of this technology range from biosensors to multicatalyst reactors.     

基于扫描探针显微术的微区光电性质测试方法和装置

本文以一台常规的Aglient 5500型的扫描探针显微镜为基础,通过配置光源及聚焦系统、研制光强度自动控制部件、研制样品台等方法将太阳光模拟器发射的光引入样品的探针扫描区域,开发了利用扫描探针显微镜原位测试太阳能电池材料微区光电性质的功能。光电性质的测试过程可在手套箱内进行,解决了有机半导体容易吸收空气中的水和氧而失效的问题。     

Self-assembly in magnetic supramolecular hydrogels

Most recent advances in the synthesis of supramolecular hydrogels based on low molecular weight gelators (LMWGs) have focused on the development of novel hybrid hydrogels, combining LMWGs and different additives. The dynamic nature of the noncovalent interactions of supramolecular hydrogels, together with the specific properties of the additives included in the formulation, allow these novel hybrid hydrogels to present interesting features, such as stimuli-responsiveness, gel-sol reversibility, self-healing and thixotropy, which make them very appealing for multiple biomedical and biotechnological applications. In particular, the inclusion of magnetic nanoparticles in the hydrogel matrix results in magnetic hydrogels, a particular type of stimuli-responsive materials that respond to applied magnetic fields. This review focuses on the recent advances in the development of magnetic supramolecular hydrogels, with special emphasis in the role of the magnetic nanoparticles in the self-assembly process, as well as in the exciting applications of these materials.     

Fabrication and biocompatible characterization of magnetic hollow capsules

Monodispersed Fe3O4/polypyrrole （PPy） hollow particles were synthesized via controllable in-situ deposition and polymerization techniques using poly（styrene-co-acrylic） （PSA） latex as template. Field-dependent magnetization plot illustrates that the capsules are superparamagnetic at 300 K. FTIR spectrum confirms that the myoglobin （Mb） molecule adsorbed on the surface of Fe3O4/PPy hollow particle essentially retains its native structure. Furthermore, direct electrochemistry of Mb can be realized on Fe3O4/PPy capsules modified pyrolytic graphite disk electrode, which indicates that the magnetic conductive polymer capsules can promote the electron transfer of protein.     

扫描探针显微镜在纳米加工中的应用

扫描探针显微镜不仅能对材料表面形貌进行原子级观测，还能够对单个的分子、原子及纳米粒子进行操纵。本文综述了扫描探针显微镜在纳米加工中对自组装单层膜的扫描探针刻蚀以及“蘸写笔”两方面的应用情况。