Determination of alkali, alkaline earth and transition metal ions in UO2, ThO2 powders and sintered (Th,U)O2 pellets by ion chromatography

An ion chromatographic method has been developed for the determination of traces of Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Sr²⁺, Fe³⁺, Cu²⁺, Ni^2+, Co²⁺, Zn²⁺, Cd²⁺, Mn²⁺ in UO₂, ThO₂ powders and sintered (Th,U)O₂ pellets. This new method utilizes poly-(butadiene-maleic acid) (PBDMA) coated silica cation exchange column and mixed functionality column of anion and cation exchange to achieve the separation of alkali, alkaline earths and transition metal ions, respectively. It involves matrix separation after sample dissolution by solvent extraction with TBP (tri butyl phosphate)-TOPO (tri octyl phosphine oxide)/CCl₄. Interference of transition metal ions in the determination of alkali, alkaline earth metal ions are removed by using pyridine 2,6-dicarboxylic acid (PDCA) in the tartaric acid mobile phase. Mobile phase composition is optimized for the base line separation of alkali, alkaline earth and transition metal ions. Linear calibration graphs in the range 0.01–20 μg mL⁻¹ were obtained with regression coefficients better than 0.999. The respective relative standard deviations were also determined. Recoveries of the spiked samples are within ±10% of the expected value. The developed method is authenticated by comparison with certified standards of UO₂ and ThO₂ powders.     

Sorption of heavy metal ions with activated carbons obtained from polyethylene terephthalate waste

The sorption capacity of activated carbons obtained from polyethylene terephthalate containers and packages with respect to heavy metal ions was examined. Based on the sorption capacities for Co²⁺, Mn²⁺, Ni²⁺, Cu²⁺, and Zn²⁺, the selectivity series were established for the samples prepared by conventional steam and gas activation and by the procedure involving pretreatment with sulfuric acid.     

Synthesis,Characterization and Applications of Immobilized Iminodiacetic Acid-Modified Silica

Porous immobilized iminodiacetic acid modified silica of the general formula S—(CH₂)₃—N(CH₂COOH)₂, (where S represents [Si—O] _n siloxane network) has been prepared by replacement of the iodide in 3-iodopropyl modified silica with diethyliminodiacetate. The immobilized-diethyliminodiacetate ligand system (S-DIDA) was then hydrolyzed by hydrochloric acid to produce the immobilized iminodiacetic acid ligand system (S-IDA). The iodo functionalized modified silica (S-I) was prepared by polycondensation of Si(OEt)₄ and (MeO)₃Si(CH₂)₃I. The XPS and CP/MAS ¹³C NMR spectra showed that not all iodine atoms are replaced and that the hydrolysis of ethyl acetate groups are incomplete upon treatment with HCl. The immobilized iminodiacetic acid ligand system exhibits high potential for the uptake of various di- and trivalent metal ions such as (Mn²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺). Complexation of the iminodiacetate ligand system for the metal ions at the optimum conditions was found in the order: Cu²⁺ > Fe³⁺ > Ni²⁺ > Co²⁺ > Mn²⁺ > Zn²⁺. Stability studies of the iminodiacetate ligand system showed that a degradation of the siloxane network and leaching of some species occurred upon treatment with strong acid and base aqueous solutions.     

1-(d-Glucopyranosyl-2′-deoxy-2′-iminomethyl)-2-hydroxynaphthalene as chemo-sensor for Fe in aqueous HEPES buffer based on colour changes observable with the naked eye

A new glucose-based C2-derivatized colorimetric chemo-sensor (L₁) has been synthesized by a one-step condensation of glucosamine and 2-hydroxy-1-naphthaldehyde for the recognition of transition metal ions. Among the eleven metal ions studied, viz., Mg²⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Hg²⁺, L₁ results in visual colour change only in the presence of Fe²⁺, Fe³⁺and Cu²⁺ in methanol. However, in an aqueous HEPES buffer (pH 7.2) it is only the Fe³⁺ that gives a distinct visual colour change even in the presence of other metal ions, up to a concentration of 280 ppb. The changes have been explained based on the complex formed, and the composition has been determined to be 2:1 between L₁ and Fe³⁺ based on Job’s plot as well as ESI MS. The structure of the proposed complex has been derived based on HF/6-31G calculations.     

Tridentate benzimidazole ligand and its metal complexes: Synthesis,characterization, photo physical and sensor properties

A tridentate bisbenzimidazole-pyridine ligand (L-C⁵) with two pentyl side-units and its metal complexes with Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ metal ions were synthesized and characterized. The structures of the ligand (L-C⁵) and its five coordinate [Mn(L-C⁵)Cl₂] were elucidated by single crystal X-ray diffraction studies. The absorption and photoluminescence properties of the compounds were studied in solution media. The ligand is highly fluorescent, and binding of the metal ions to the ligand has caused significant changes in the emission band (shift or quenching). Moreover, the effect of aggregation on UV–Vis. absorption and emission properties was examined in MeOH-water mixtures. The ligand was found to show aggregation-induced quenching in the MeOH-water mixture. The ligand was also screened for its colorimetric and fluorometric sensing ability of several metal ions [Na⁺, K⁺, Mg²⁺, Al³⁺, Ca²⁺, Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Hg²⁺, Pb²⁺]. The ligand showed selective sensing ability towards Zn²⁺, and the limit of detection was calculated as 3.09 × 10⁻⁷ m . The ligand also showed a distinguishable color change in the presence of Fe²⁺ under daylight.     

Advanced oxidation processes for decolorization of aqueous solution containing acid red G azo dye

Some investigations concerning the decolorization of Acid Red G azo dye by photooxidation with hydrogen peroxide were performed. The influences of pH, oxidant concentration, and the presence of Fe²⁺ or other metal ions (Co²⁺, Cu²⁺, Ni²⁺, Mn²⁺) as potential catalysts, were investigated. The best results were obtained in the presence of ferrous ions in acid and neutral media. The other ions are not as effective as Fe²⁺ for dye decolorization. Co²⁺ and Cu²⁺ ions have a catalytic action, at low concentration, within a wide range of pH. Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid Ni²⁺ and Mn²⁺ ions have no catalytic effect in photooxidation with hydrogen peroxide at acid pH values, but show a weak action in alkaline media.     

Synthesis and characterization of 2, 4-dihydroxy-benzaldehydeoxime-formaldehyde polymers and their application as ion-exchangers

Polymers were prepared by the condensation of 2, 4-dihydroxybenzaldehydeoxime (2, 4-DBO) and formaldehyde (F) in the presence of oxalic acid as catalyst with varying molar ratios of reacting monomers. Polymers were characterized by their IR spectra, elemental analyses, TGA and M_n as determined by vapour pressure osmometry as well as by non-aqueous conductometric titrations. Viscosity measurements of the solutions of polymer samples were carried out in dimethylformamide. Chelation ion-exchange properties have also been studied employing the batch equilibration method. This method involved the measurement of distribution of a given metal between the polymer sample and a solution containing metal ions. The study was carried out over a wide pH range and in media of various ionic strengths. The polymer showed a higher selectivity for UO ₂ ²⁺ and Fe³⁺ ions than for Cu²⁺, Ni²⁺, Co²⁺ and Mn²⁺ ions.     

1,8-萘酰亚胺为发色团的Zn2+荧光探针的合成及性能研究

合成了以1,8-萘酰亚胺为发色团,以联吡啶为离子受体的Zn²⁺荧光探针,并进行了表征及离子识别性能的研究。研究表明该化合物对Zn²⁺具有良好的识别性能,同时相对于Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Hg²⁺, Fe³⁺, Mn²⁺, Ni²⁺, Pb²⁺等金属离子具有良好的选择性。     

Selectivity of mixed zirconium-titanium phosphates toward transition metals

Mixed zirconium-titanium phosphates were synthesized by various methods and under various conditions. The effect of these conditions on the selectivity of synthetized samples toward the transition metal ions was investigated. It was found that the k_d values are independent of the metal concentration and they give the selectivity order Zn²⁺>Cu²⁺ Co²⁺, Ni²⁺>Mn²⁺.     

螯合树脂研究 Ⅻ.以聚硫醚为主链的异丙巯基胺树脂的合成及其吸附性能

 由聚环硫氟丙烷与多乙烯多胺反应制得的聚合物(PB)再与环硫丙烷反应,合成了四种以聚硫醚为主链的异丙巯基胺树脂(PBM_1-4)。树脂对Au³⁺、Pd²⁺、Pt⁴⁺、Ag⁺和Hg²⁺等离子具有强的吸附能力,对Cu²⁺次之,对Zn²⁺和Pb²⁺很弱。树脂对贵金属具有高的选择性,能从含Au³⁺、Cr³⁺、Co²⁺、Ni²⁺、Cu²⁺、Mn²⁺、Zn²⁺和Fe³⁺的溶液中定量吸附Au³⁺而不吸附其它离子。     

ADDUCTS OF THEOBROMINE WITH 3d METAL PERCHLORATES

Abstract

Adducts of theobromine (tbH) with 3d metal perchlorates (Mⁿ⁺ = Cr^3-. Mn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn^2- I here prepared by refluxing mixtures of the Iigand and a metal salt in ethyl acetate-triethyl orthoformate. The new complexes invariably involve 2: 1 molar ratios of tbH to metal ion and are apparently monomeric with terminal tbH ligands binding riaa ring nitrogen (N9 or Nl). The Mn²⁺, Cu²⁺ and Zn^2- complexes are distorted tetrahedral, involving tuo tbH and two unidentate perchlorato ligands in the first coordination sphere of the metal ion. The remaining metal(II) complexes (Fe, Co, Ni) were obtained as monohydrates. These compounds are pentacoordinated of the [M(tbH)₂(OClO₃)₂(OH₂)] type, containing one aqua ligand in addition to the tbH and perchlorato ligands. The Cr³⁺ and Fe³⁺ complexes are low-symmetry hexacoordinated, with two tbH ligands. two unidentate and one bidentate chelating perchlorate Iigands.     

A serial of 2D Co-Zn isomorphous metal–organic frameworks for photodegradation and luminescent detection properties

A series of 2D isomorphous MOFs [M (HBTC)(BMIOPE)·DMF·H₂O]_n (M = Zn ( 1 ), Zn_0.7Co_0.3 ( 2 ), Zn_0.5Co_0.5 ( 3 ), Zn_0.3Co_0.7 ( 4 ), Co ( 5 ), H₃BTC = 1,3,5-benzenetricarboxylic acid, BMIOPE = 4,4′-bis(2-methylimidazol-1-yl)diphenyl ether) were synthesized to investigate the correction between the center metal ions and the photocatalytic behaviors. The photocatalytic results show that with the increase of Co²⁺ content, the photodegradation properties are continuously improved from 1 to 5 , which fully indicate that only changing metal ions could regulate the photodegradation properties. In detail, 1 is an inactive photocatalyst to degrade methylene blue (MB), while 5 exhibits preeminent photocatalytic properties under visible light irradiation. Moreover, 1 shows good selective sensing toward Fe³⁺, Cr³⁺, UO₂²⁺, CrO₄²⁻ and Cr₂O₇²⁻ ions in aqueous solution. To the best of our knowledge, 1 is the first MOF example for the optical detection of Fe³⁺, Cr³⁺, UO₂²⁺, CrO₄²⁻ and Cr₂O₇²⁻ ions in aqueous solution.     

Die gravimetrische Halbmikro-Bestimmung des Palladiums mit Violursäure

Zusammenfassung Die Fällung des Palladiums als Violurat eignet sich zur Bestimmung des als Chlorid vorliegenden Metalls neben Pt⁴⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Zn²⁺, Ca²⁺, den Alkalien und neben größeren Mengen von Pb²⁺-Ionen.

---

Summary The precipitation of palladium as violurate is suitable for the determination of the metal present as chloride even in the presence of: Pt⁴⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Zn²⁺, Ca²⁺, the alkalis and also considerable amounts of Pb²⁺ ions.

---

Résumé Le précipité de violurate de palladium convient pour le dosage de cet élément préexistant sous forme de chlorure, en présence de Pt⁴⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Zn²⁺, Ca²⁺, des métaux alcalins et de grandes quantités d'ions Pb²⁺.

     

A highly selective colorimetric sensor to Fe3+ and Co2+ in aqueous solutions

Five aromatic azo dyes with hydroxyl groups (1–5) were designed and synthesized by coupling reactions. The relationships between structures of the compounds and the spectroscopic properties were investigated. The absorption spectra of these compounds upon titration with K⁺, Ca²⁺, Al³⁺, Mg²⁺, Ni²⁺, Mn²⁺, Cd²⁺, Cr³⁺, Fe³⁺, Cu²⁺, Zn²⁺, Co²⁺, Hg²⁺, and Pb²⁺ ions in neutral aqueous solutions were reported. The results are coincident with the calculation results using the density functional theory method. The high selectivity, excellent water solubility and simple synthetic process make 1-[(2-Hydroxyl)phenylazo]-2-naphthol (5) a potential sensor for sensing Fe³⁺ and Mn²⁺ with the naked eye. 1-[(2-hydroxyl)phenylazo]-2-naphthol-6-sulfonic acid (3) shows high selectivity for the colorimetric detection of Fe³⁺ and Co²⁺ among the tested metal ions. The detection limitations of 3 for determining Co²⁺ and Fe³⁺ were calculated to be 2.8 × 10^?7 and 5.6 × 10^?7 mol/L, respectively.     

Selective transport of copper(II) ions across a liquid membrane mediated by Piroxicam

Piroxicam was found to be a highly selective carrier for uphill transport of Cu²⁺ ions through a chloroform liquid membrane. The transport occurs via a counterflow of protons from the receiving phase to the source phase. The effects of several parameters on the transport of Cu²⁺ ions, such as the carrier concentration, pH of the source phase, composition of the receiving phase, and duration are described. A high transport efficiency (98±2%) was provided by the carrier for Cu²⁺ ions in a receiving phase of 0.01 mol l⁻¹ sulfuric acid after 4 h. Different metal ion transport experiments showed that Cu²⁺ ions were selectively transported over other ions, such as Co²⁺, Ni²⁺, Cd²⁺, Pb²⁺, Zn²⁺, UO₂²⁺ and ZrO₂²⁺. In the presence of fluoride ions (used as a suitable masking agent in the source phase), the interfering effects of UO₂²⁺ and ZrO₂²⁺ ions were eliminated. The applicability of the method was tested on a real sample, and the results obtained show that it is potentially useful for solvent extraction of copper.     

Über die Extrahierbarkeit von Metallverbindungen der Diphenylarsinsäure

Zusammenfassung Es wird über die Möglichkeit berichtet, Metallionen aus wäßriger Lösung mit Hilfe organischer Lösungsmittel als Verbindungen der Diphenylarsinsäure extrahieren zu können. Von den untersuchten Ionen Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ und Mg²⁺ sind mit Chloroform nur Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ und Al³⁺ extrahierbar. Mit Trichloräthylen ist praktisch nur mehr Pb²⁺ extrahierbar, während Benzol und Essigester keinerlei Extraktionswirkung zeigen. Vergleiche mit dem Verhalten aliphatischer Arsinsäuren werden angestellt.

---

Summary A report is given concerning the possibility of extracting metal ions from aqueous solution by means of organic liquids as compounds of diphenylarsinic acid. The ions investigated included Fe³⁺, Al³⁺, Bi³⁺, UO₂ ²⁺, Zn²⁺, Cr³⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺, and Mg²⁺. Of these only Pb²⁺, Bi³⁺, Be²⁺, Zn³⁺ and Al³⁺ are extractable with chloroform. With trichloro ethylene only Pb²⁺ is extractable, whereas benzene and acetic ester show no extraction action. Comparisons were made with the behavior of aliphatic arsinic acids.

---

Résumé On décrit la possibilité d'extraction d'ions métalliques à l'état de composés de l'acide diphénylarsinique, à partir de leur solution aqueuse, à l'aide d'un solvant organique. Parmi les ions étudiés, Fe³⁺, Al³⁺, Bi³⁺, Cr³⁺, UO₂ ²⁺, Zn²⁺, Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, Mn²⁺, Be²⁺, Pb²⁺, Ca²⁺ et Mg²⁺, seuls Pb²⁺, Bi³⁺, Be²⁺, Zn²⁺ et Al³⁺ peuvent être extraits par le chloroforme. Le trichloréthyléne ne permet que l'extraction du Pb²⁺, cependant que le benzène et l'ester acétique ne manifestent aucune activité d'extraction. On établit une comparaison avec le comportement des acides arsiniques aliphatiques.

     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

Complexation of 3-hydroxy-2,2′-iminodisuccinic acid (HIDS) with Mg2+, Ca2+, Mn2+, Fe3+, Fe2+, Co2+, Ni2+, Cu2+, and Zn2+ ions in aqueous solution

In a search for environmental-friendly metal chelating ligands for industrial applications, the protonation and complex formation equilibria of 3-hydroxy-2,2′-iminodisuccinic acid with Mg²⁺, Ca²⁺, Mn²⁺, Fe³⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ ions in aqueous 0.1 mol L^?1 NaCl solution were studied at 25°C by potentiometric titration. The model for complexation and the stability constants of the different complexes were determined for each metal ion using the computer program SUPERQUAD. In all cases, complex formation was dominated by stable ML ^{n ?4} complexes.     

Binding Interaction of Captopril with Metal Ions: A Fluorescence Quenching Study

The binding interaction of captopril (CPL) with biologically active metal ions Mg²⁺, Ca²⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ and Zn²⁺ was investigated in an aqueous acidic medium by fluorescence spectroscopy. The experimental results showed that the metal ions quenched the intrinsic fluorescence of CPL by forming CPL‐metal complexes. It was found that static quenching was the main reason for the fluorescence quenching. The quenching constant in the case of Cu²⁺ was highest among all quenchers, perhaps due to its high nuclear charge and small size. Quenching of CPL by metal ions follows the order Cu²⁺>Ni²⁺>Co²⁺>Ca²⁺>Zn²⁺>Mn²⁺>Mg²⁺. The quenching constant K_sv, bimolecular quenching constant K_q, binding constant K and the binding sites "n" were determined together with their thermodynamic parameters at 27 and 37°C. The positive entropy change indicated the gain in configurational entropy as a result of chelation. The process of interaction was spontaneous and mainly ΔS‐driven.     

Selective and Sensitive Two New Macroacyclic Schiff base Fluorescent Turn-Off Receptors for Fe3+, DFT Calculation and Their Antibacterial Activity

Two new Macroacyclic Schiff base chemosensors (L₁ and L₂) were synthesized by the one pot condensation reaction of 2-[3-(2-formyl phenoxy)propoxy]benzaldehyde and aminophenol in a 1:2 molar ratio and were characterized by IR, NMR spectroscopy. Both Schiff bases displayed high selectivity and sensitivity towards Fe³⁺ over other metal ions in H₂O-DMF solution (Ag⁺,Cu²⁺, Ni²⁺, Zn²⁺, Mg⁺², Mn⁺², Pb⁺², Co⁺², Hg⁺², Cr⁺³, Na⁺, Ba⁺² and Cd²⁺) due to their structure including oxygen donor atoms. The test results showed fluorescence quenching of the fluorophores when Fe³⁺ was bound to the recognition units. From test results, a high selectivity for Fe³⁺ were discovered in this type of sensors, especially, the probe based on 2-aminophenol exhibited more significant quenching in fluorescence intensity compared with 4-aminophenol-based due to its rigidity structure. In addition, the structure of ligands and their antibacterial properties was investigated.