NMR and impedance spectroscopy data on the ionic mobility and conductivity in PbSnF4 doped with alkali metal fluoride

NMR and impedance spectroscopy are used to study the ionic mobility and conductivity in crystalline samples in PbSnF₄-MF systems (M = Li, Na, K) in a 150?C473 K temperature range. The ¹⁹F NMR spectral parameters, types of ionic motion, and ionic conductivity value in the PbSnF₄ compound doped with alkali metal fluoride is found to be determined by the temperature, nature, and concentration of an alkali cation. The specific conductivity of the crystalline samples in PbSnF₄-MF systems (M = Li, Na, K) is rather high at room temperature and hence, it seems possible to apply them in the development of functional materials with high ionic (superionic) conductivity.     

Ion dynamics in mixed alkali cadmium fluoride glasses

We have investigated ion dynamics in cadmium fluoride nonoxide glasses, in the frequency range from 10 Hz to 2 MHz and in the temperature range from room temperature to just below the glass transition temperature. We have established the existence of mixed alkali effect for these glasses from different aspects of relaxation dynamics. We have observed lower dimensionality of the conduction pathways in mixed alkali cadmium fluoride glasses compared to that in the single alkali glasses. Although, both n and beta represent the interaction between the charge carriers, we have not found any theoretical correlation between them. Using different scaling approaches we have shown that the relaxation dynamics in mixed alkali cadmium fluoride glasses is independent of temperatures.     

Study of the thermal properties and some reactions of silver fluorides

The thermal properties of silver fluoride and silver subfluoride were studied by derivative thermal analysis and by X-ray analysis. From the results, conclusions were drawn on the decomposition mechanism.The thermal behaviour of silver fluoride-alkali halide systems was studied. It was established that silver fluorides react with the alkali halides.     

Ionic mobility and conductivity in PbSnF<Subscript>4</Subscript> doped with CaF<Subscript>2</Subscript> from the NMR and impedance spectroscopy data

The ionic mobility and conductivity in the crystalline phases of PbSnF_4–xCaF₂ systems (x = 2.5 mol.%, 5 mol.%, 7.5 mol.%, and 10 mol.%) in the temperature range of 150-500 K are studied by NMR and impedance spectroscopy. The parameters of ¹⁹F NMR spectra, types of ion motions, and ionic conductivity in the PbSnF₄ compound doped with calcium fluoride are found to be determined by the temperature and concentration of calcium fluoride. The specific conductivity of the crystalline phases in the PbSnF₄–CaF₂ systems is rather high at room temperature, and hence, one cannot exclude the possibility to use them for the creation of functional materials with a high ionic (superionic) conductivity.     

The influence of chain structure on the equilibrium melting temperature of poly(vinylidene fluoride)

Three poly(vinylidene fluoride) whole polymers were fractionated according to their head-to-head concentrations. Their melting temperatures and fusion properties were studied. Although small but significant differences were found among the fractions obtained from a given parent polymer, a wide range in chain compositions was not obtained. The equilibrium melting temperatures were determined by extrapolating the dependence of the observed melting temperature on the crystallization temperature. A critical analysis is given of this extrapolation method as applied to poly(vinylidene fluoride) and the results are compared with literature reports. The problems involved in explaining the dependence of the equilibrium melting temperatures on the structural irregularities of the chain are given. Possible reasons for the relatively high level of crystallinity that is observed, for what is essentially a copolymer, are also discussed.     

Internal Mobility, Structure, Phase Transitions, and Ionic Conductivity in Thallium Fluoroantimonates(III) TlSb4F13 and TlSb3F10

Internal mobility in TlSb₄F₁₃ (I) and TlSb₃F₁₀ (II) was studied by ¹⁹F NMR spectroscopy in the temperature range 210-450 K. Types of ionic motion in the fluoride subsystem were determined. Phase transitions resulting in modifications with high ionic (superionic) conductivity above 420 K were established for both compounds (385-425 K). Using impedance spectroscopy, we studied the electrophysical properties of I and II in the temperature range 290-425 K ( 1.1×10^-3 and 1.0× 10^-3 S/cm for I and II, respectively; T=425 K).     

Density of stratified ionic melts: Experiment and theory

Densities of phases co-existing in molten ionic systems with partial miscibility out of halides of alkali metals (KBr, KI, RbBr, RbI, CsCl, CsBr, CsI) with lithium fluoride are determined in a broad temperature interval by a method of hydrostatic weighing. A linear decrease in the difference between phase densities with increasing temperature is found for all systems. By studying a molten KBr-LiF mixture, this regularity is traced up to a critical miscibility point. The critical index of the order parameter, calculated from these data happens to equal 1/2 and coincide with results predicted by mid-field theory.     

羧酸盐类成核剂在聚2,6-萘二甲酸乙二酯中的化学成核

采用与PEN分子结构单元相似的 2 ,6 萘二甲酸二甲酯 (DMN)和熔点较低的邻氯苯甲酸钠 (SOCB)为模型化合物 ,用DSC、FTIR、带热台偏光显微镜 (HPOM)和HPLC等方法 ,研究了DMN和SOCB在热处理过程中的化学反应 .DSC和HPOM研究也证明了PEN与SOCB在高温下发生化学反应 .因而提出羧酸盐类成核剂在PEN中的成核是“化学成核” .即在高温下羧酸盐类成核剂和PEN发生化学反应 ,生成PEN的羧端基离子盐 ,该离子盐是真正的成核剂 ,起到成核作用     

含氰基离子液体的合成、表征及流变性质研究

摘要合成、 表征了一系列新的含氰基咪唑类离子液体. 测定了该离子液体的密度、 熔点及溶解性等物理性质, 研究了其在稳态、 瞬态和动态条件下的流变行为. 结果表明, 当剪切速率在0.1～50 s^-1范围内时, 其粘度不随剪切速率的变化而变化, 但随温度升高而降低, 粘流活化能随取代基长度变化呈现规律性变化. 对于1-丁基-3-氰乙基咪唑六氟磷酸盐离子液体, 维持剪切速率不变时, 其剪切应力和粘度均不随时间变化, 且随着温度的升高而降低; 在动态条件下, 在线性粘弹区, 复合粘度和损耗模量G″ 随温度升高而降低. 关键词     

Alternating-current ionic conduction and dielectric relaxation of poly(vinylidene fluoride) at high temperatures

Dielectric properties of poly(vinylidene fluoride) have been studied in the frequency range 20 Hz to 1 MHz and between 100 and 220°C, during heating and cooling. The dielectric constant and loss change abruptly at the temperature T_m corresponding to the melting point. At lower frequencies, two types of ionic conductin are observed. One appears below T_m and is attributed to interfacial polarization. The other occurs above T_m and is related to electrode polarization. These results suggest that a crystalline polymer is a heterogeneous medium for ionic transport, while the melt is a homogeneous medium. From these results, the nature of ac ionic conduction in crystalline polymers is discussed. At high frequency, the α relaxation is observed below T_m. It is due to the molecular motion in the crystalline region and disappears at T_m.     

VISCOELASTICITY AND IONIC CONDUCTIVITY OF TWO-COMPONENT EPOXY NETWORK CONTAINING LITHIUM PERCHLORATE*

Polymeric solid electrolyte system composed of triglycidyl ether of glycerol (TGEG), diglycidyl ether of polyethylene glycol (DGEPEG)and LiClO_4 salt were synthesized. In this" system the electrolyte has a pecularity that not merely can the LiClO_4 provide ionic carriers, but also catalyze the crosslinking reaction without adding an usual curing agent. The effect of salt content and degree of crosslinking on the viscoelasticity and ionic conductivity were studied. Both WLF and VTF equations were used to treat the experimental data in order to elucidate the mechanism of ionic conduction. It was found that the ionic conductivity of the system is carded out through the segmental motion mechanism. However, the data must be treated with care. For example, in evaluating WLF parameters, the contribution concerned with ionic carrier generation with temperature to the conductivity must be differentiated from that concerned with segmental motion. Besides, the temperature range suitable to WLF equation must also be considered. For VTF equation, it might be inapplicable ff the temperature is too low and close to the glass transition temperature of the specimen. Further study is needed in order to have a quantitative information on the limitation of these equations.     

Heat capacities and excess enthalpies of the (N-hexylisoquinolinium thiocyanate ionic liquid + water) binary systems

In the present work the binary mixtures containing the ionic liquid N-hexylisoquinolinium thiocyanate, [HiQuin][SCN] and water was considered as a new working pair for absorption refrigeration.Experimental heat capacities and excess enthalpies of the binary mixtures were determined at different ionic liquid mole fractions over a wide range of temperature at ambient pressure. The influence of temperature and composition on measured properties was assessed and suitable equations were used to correlate the experimental data.     

碱分离-EDTA络合滴定法测定铝基钯催化剂中的氧化铝

采用碱分离-EDTA络合滴定法测定铝基钯催化剂中的氧化铝,考察了试样分解温度、EDTA的用量、煮沸时间、氟化钾用量、共存离子干扰等一系列条件对铝测定结果的影响。对标准样品定值的5个铝基钯催化剂的氧化铝进行测定,测定结果与参考值一致,测定范围是75%～95%,测定结果的相对标准偏差RSD(n=7)均小于1%。实验表明所拟定的铝基钯催化剂中铝的EDTA络合滴定法,测定结果准确可靠。     

碱分离-EDTA络合滴定法测定铝基钯催化剂中的氧化铝

采用碱分离-EDTA络合滴定法测定铝基钯催化剂中的氧化铝,考察了试样分解温度、EDTA的用量、煮沸时间、氟化钾用量、共存离子干扰等一系列条件对铝测定结果的影响。对标准样品定值的5个铝基钯催化剂的氧化铝进行测定,测定结果与参考值一致,测定范围是75%～95%,测定结果的相对标准偏差RSD(n=7)均小于1%。实验表明所拟定的铝基钯催化剂中铝的EDTA络合滴定法,测定结果准确可靠。     

改进的低温固相法制备钙钛矿型KTaO3

采用改进的固相法, 以K2CO3和氢氧化钽为原料, 通过添加KF, 在相对低温下制备了单一钙钛矿结构的KTaO3. KF的加入抑制了烧绿石相的生成, 通过水洗可脱除KF. 使用X射线衍射仪(XRD), 扫描电子显微镜(SEM)和紫外-可见(UV-Vis)漫散射光谱仪对不同温度下制备的产物进行了表征. 结果表明, 各个温度下制备的产物均是由粒径在10~30 nm范围内的粒子聚集成的大颗粒; 500, 600和800℃制备的产物带隙分别为3.68, 3.63和3.54 eV. 进一步考察其它碱金属卤化物对产物结构的影响发现, LiF, NaF和KF的作用相同; 当添加碱金属氯化物时, 主要产物分别是钽酸锂、 钽酸钠和烧绿石结构的钽酸钾.     

NMR spectroscopy of bismuth fluoride glasses with alkali cations

Results of the ⁷Li, ¹⁹F, and ²³Na NMR studies of ionic mobility in bismuth fluoride glasses in the systems BiF₃-LiF and BiF₃-MF-ZrF₄ (M = Li, Na, K, Cs) are summarized. Analysis of the ⁷Li, ¹⁹F, and ²³Na NMR spectra made it possible to reveal changes in the nature of ion motions in the fluoride, lithium and sodium sublattices of glasses upon temperature variation and to determine their types. The temperature ranges were found where main types of ion motions in the tested glasses are represented by diffusion of lithium ions, reorientations of fluorine-containing groups constituting the glass network, and diffusion of fluorine ions. The role of alkali cations in the formation of ionic mobility in bismuth fluorozirconate glasses is considered.     

Low-temperature heat capacity of hydrophilic ionic liquids [BMIM][CF3COO] and [BMIM][CH3COO] and a correlation scheme for estimation of heat capacity of ionic liquids

Heat capacity for 1-butyl-3-methylimidazolium trifluoroacetate [bmim][CF₃COO] and acetate [bmim][CH₃COO] in the temperature range of (5 to 370) K has been measured by adiabatic calorimetry. Temperatures and enthalpies of phase transitions in [bmim][CF₃COO] have been determined. Thermodynamic functions for the compounds in the condensed state have been calculated. Physicochemical properties for the studied ionic liquids and alkali acetate salts have been compared. The correlation scheme for estimation of C_p of ionic liquids in a range of (190 to 370) K has been developed.     

Single-ionic gel polymer electrolyte based on polyvinylidene fluoride and fluorine-containing ionomer

The novel single-ionic conductive gel polymer electrolyte was prepared from polyvinylidene fluoride (PVDF), propylene glycol carbonate (PC) and a new fluorine-containing ionomer. Cation-carbonyl interaction behavior, morphology and ionic conductive properties of this gel polymer electrolyte were studied by infrared spectra analysis (IR), nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), scanning electron microscopy (SEM) and complex impedance analysis. The results showed that the fluorine-containing ionomer was miscible with both PVDF and PC, and that the carbonyl groups in the ionomer and PC could bond competitively with the cation. Both the content of fluorine-containing ionomer and the content of PC had a great effect on morphology and ionic conductive properties of the samples. For this new gel polymer electrolyte, an ionic conductivity of above 10⁻⁴ S cm⁻¹ at room temperature could be reached, and this electrolyte system was a single-ionic kind gel polymer electrolyte with the transport number of the sodium ion exceed 0.99 (t₊>0.99).