MgB2 coated superconducting tapes with high critical current densities fabricated by hybrid physical-chemical vapor deposition

The MgB₂ coated superconducting tapes have been fabricated on textured Cu (0 0 1) and polycrystalline Hastelloy tapes using coated conductor technique, which has been developed for the second generation high temperature superconducting wires. The MgB₂/Cu tapes were fabricated over a wide temperature range of 460-520 °C by using hybrid physical-chemical vapor deposition (HPCVD) technique. The tapes exhibited the critical temperatures (T_c) ranging between 36 and 38 K with superconducting transition width (ΔT_c) of about 0.3-0.6 K. The highest critical current density (J_c) of 1.34 × 10⁵ A/cm² at 5 K under 3 T is obtained for the MgB₂/Cu tape grown at 460 °C. To further improve the flux pinning property of MgB₂ tapes, SiC is coated as an impurity layer on the Cu tape. In contrast to pure MgB₂/Cu tapes, the MgB₂ on SiC-coated Cu tapes exhibited opposite trend in the dependence of J_c with growth temperature. The improved flux pinning by the additional defects created by SiC-impurity layer along with the MgB₂ grain boundaries lead to strong improvement in J_c for the MgB₂/SiC/Cu tapes. The MgB₂/Hastelloy superconducting tapes fabricated at a temperature of 520 °C showed the critical temperatures ranging between 38.5 and 39.6 K. We obtained much higher J_c values over the wide field range for MgB₂/Hastelloy tapes than the previously reported data on other metallic substrates, such as Cu, SS, and Nb. The J_c values of J_c(20 K, 0 T) ∼5.8 × 10⁶ A/cm² and J_c(20 K, 1.5 T) ∼2.4 × 10⁵ A/cm² is obtained for the 2-μm-thick MgB₂/Hastelloy tape. This paper will review the merits of coated conductor approach along with the HPCVD technique to fabricate MgB₂ conductors with high T_c and J_c values which are useful for large scale applications.     

Effects of nano-carbon doping and sintering temperature on microstructure and properties of MgB2

We fabricated nano-carbon (NC) doped MgB₂ bulks using an in situ process in order to improve the critical current density (J_c) under a high magnetic field and evaluated the correlated effects of the doped carbon content and sintering temperature on the phase formation, microstructure and critical properties. MgB_2−xC_x bulks with x = 0 and 0.05 were fabricated by pressing the powder into pellets and sintering at 800 °C, 900 °C, or 1000 °C for 30 min.We observed that NC was an effective dopant for MgB₂ and that part of it was incorporated into the MgB₂ while the other part remained (undoped), which reduced the grain size. The actual C content was estimated to be 68–90% of the nominal content. The NC doped samples exhibited lower T_c values and better J_c(B) behavior than the undoped samples. The doped sample sintered at 900 °C showed the highest J_c value due to its high doping level, small amount of second phase, and fine grains. On the other hand, the J_c was decreased at a sintering temperature of 1000 °C as a result of the formation of MgB₄ phase.     

MgB2 coated conductors directly grown on flexible metallic Hastelloy tapes by hybrid physical–chemical vapor deposition

MgB₂ coated conductors (CCs), which can avoid the low packing density problem of powder-in-tube (PIT) processed wires, can be a realistic solution for practical engineering applications. Here we report on the superior superconducting properties of MgB₂ CCs grown directly on the flexible metallic Hastelloy tapes without any buffer layer at various deposition temperatures from 520 to 600 °C by using hybrid physical–chemical vapor deposition (HPCVD) technique. The superconducting transition temperatures (T_c) are in the range of 38.5–39.4 K, comparable to bulk samples and high quality thin films. Clear (101) and (002) reflection peaks of MgB₂ are observed in the X-ray diffraction patterns without any indication of chemical reaction between MgB₂ and Hastelloy tapes. From scanning electron microscopy, it was found that connection between MgB₂ grains and voids strongly depend on the growth temperature. A systematic increase in the flux pinning force density and thereby the critical current density with decreasing growth temperature was observed for the MgB₂ CCs. The critical current density (J_c) of J_c(5 K, 0 T) ～10⁷ A/cm² and J_c(5 K, 2.5 T) ～10⁵ A/cm² has been obtained for the sample fabricated at a low growth temperature of 520 °C. The enhanced J_c (H) behavior can be understood on the basis of the variation in the microstructure of MgB₂ CCs with growth temperature.     

Preparation and electrical properties of a pyrochlore-related Ce2Zr2O8−x phase

A pyrochlore-related Ce₂Zr₂O_8−x phase has been prepared in a reduction reoxidation process from Ce_0.5Zr_0.5O₂ powders. Ce₂Zr₂O_8−x, based on a cubic symmetry with a=1.053 nm, decomposes in nitrogen at 800 °C, but remains stable up to 900 °C in air. It shows mixed oxygen ionic and electronic conductivity. The bulk conductivity at 700 °C is 4×10⁻⁴ S cm⁻¹ in air and 1×10⁻² S cm⁻¹ in nitrogen, and the activation energy is 1.27 eV in air. In nitrogen, the Arrhenius law is not obeyed, and a curved plot was obtained from 400 to 700 °C; then, the conductivity decreased rapidly due to the thermal decomposition of Ce₂Zr₂O_8−x.     

Pyroelectric properties in three phases coexistence Pb[(Mn0.33Nb0.67)0.5(Mn0.33Sb0.67)0.5]0.08(ZrxTi1−x)0.92O3 lead ceramics

The bulk dense Pb[(Mn_0.33Nb_0.67)_0.5(Mn_0.33Sb_0.67)_0.5]_0.08(Zr_xTi_1−x)_0.92O₃ pyroelectric ceramics have been successfully prepared by the conventional solid method. The effect of three phases coexistence in the ceramics is studied. When x = 0.95 and 0.85 in the ceramics, the maximum pyroelectric coefficient peaks appear at 23 °C and 45 °C, and the maximum values are 26.5 × 10⁻⁴ C/m² °C and 25.5 × 10⁻⁴ C/m² °C, respectively. The maximum pyroelectric coefficient appears large while the peaks widths are small. When the two kinds of ceramic powders mixed with the mol ratio of 2:1, the pyroelectric coefficient of the ceramics is above 10.0 × 10⁻⁴ C/m² °C in a broad temperature range from 20 °C to 55 °C. The possible physical mechanism of the temperature broadened phenomenon is briefly discussed.     

Electrical conductivity of Ag/Na ion-exchanged titanosilicate glasses

The Ag₂O–TiO₂–SiO₂ glasses were prepared by Ag⁺/Na⁺ ion-exchange method from Na₂O–TiO₂–SiO₂ glasses at 380–450 °C below their glass transition temperatures (T_g), and their electrical conductivities were investigated as functions of TiO₂ content and the ion-exchange ratio (Ag/(Ag+Na)). In a series of glasses 20R₂O·xTiO₂·(80−x)SiO₂ with x=10, 20, 30 and 40 in mol%, the electrical conductivities at 200 °C of the fully ion-exchanged glasses of R=Ag were in the order of 10⁻⁵ or 10⁻⁴ S cm⁻¹ and were 1 or 2 orders of magnitude higher than those of the initial glasses of R=Na. The glass of x=30 exhibited the highest increase of conductivity from 3.8×10⁻⁷ to 1.3×10⁻⁴ S cm⁻¹ at 200 °C by Ag⁺/Na⁺ ion exchange among them. When the ion-exchange ratio was changed in 20R₂O·30TiO₂·50SiO₂ system, the electrical conductivity at 200 °C exhibited a minimum value of 7.6×10⁻⁸ S cm⁻¹ around Ag/(Ag+Na)=0.3 and increased steeply in the region of Ag/(Ag+Na)=0.5–1.0. When the ion-exchange temperature was changed from 450 to 400 °C, the conductivity of the ion-exchanged glass of x=30 decreased. The infrared spectroscopy measurement revealed that the ion-exchange temperature of 450 °C induced a structural change in the glass of x=30. The T_g of the fully ion-exchanged glass of x=30 was 498 °C. It was suggested that the incorporated silver ions changed the average coordination number of titanium ions to form higher ion-conducting pathway and resulted in high conductivity in the titanosilicate glasses.     

Modulation of luciferase activity using high intensity focused ultrasound in combination with bioluminescence imaging, magnetic resonance imaging and histological analysis in muscle tissue

This study investigates the effect of high intensity focused ultrasound (HIFU) to muscle tissue transfected with a luciferase reporter gene under the control of a CMV-promoter. HIFU was applied to the transfected muscle tissue using a dual HIFU system. In a first group four different intensities (802 W/cm², 1401 W/cm², 2117 W/cm², 3067 W/cm²) of continuous HIFU were applied 20 s every other week for four times. In a second group two different intensities (802 W/cm², 1401 W/cm²) were applied 20 s every fourth day for 20 times. The luciferase activity was determined by bioluminescence imaging. The effect of HIFU to the muscle tissue was assessed by T1-weighted ± Gd-DTPA, T2-weighted and a diffusion-weighted STEAM sequence obtained on a 1.5-T GE-MRI scanner. Histology of the treated tissue was done at the end. In the first group the photon emission was at 3067.6 W/cm² 1.28 × 10⁷ ± 3.1 × 10⁶ photon/s (5.5 ± 1.2-fold), of 2157.9 W/cm² 8.1 ± 2.7 × 10⁶ photon/s (3.2 ± 1.1-fold), of 1401.9 W/cm² 9.3 ± 1.3 × 10⁶ photon/s (4.9 ± 0.4-fold) and of 802.0 W/cm² 8.6x ± 1.2 × 10⁶ photon/s (4.5 ± 0.6-fold) compared to baseline. In the second group the photon emission was at 1401.9 W/cm² and 802.0 W/cm² 14.1 ± 3.6 × 10⁶ photon/s (6.1 ± 1.5-fold), respectively, 5.1 ± 4.7 × 10⁶ photon/s (6.5 ± 2.0-fold). HIFU can enhance the luciferase activity controlled by a CMV-promoter.     

Ion-beam irradiation effect on solid-phase growth of β-FeSi2

Effects of Ar⁺ ion-beam irradiation on solid-phase growth of β-FeSi₂ have been investigated. Fe (10 nm)/Si structures were irradiated with 25 keV Ar⁺ (5.0×10¹⁵ cm⁻²) at a temperature of 25°C (sample A) or 400°C (sample B), and subsequently annealed at 800°C. A reference was obtained after annealing without irradiation (sample C). X-ray diffraction results indicated that β-FeSi₂ was formed after annealing at 800°C for 5 h, and the formation rate was the fastest for sample A and the slowest for sample C, i.e., A>BC. However, Auger electron spectroscopy measurements showed that atomic mixing at Fe/Si interface before annealing was B>AC. These results suggested that amorphization of Si substrate, in addition to atomic mixing, enhanced the solid-phase growth of β-FeSi₂, which was confirmed experimentally. Moreover, a direct band gap of 0.89 eV was observed for the sample with pre-amorphization by the Fourier-transform infrared (FT-IR) spectroscopy measurements. These enhancement effects were attributed to that the phase transition to β-FeSi₂ was accelerated by atomic arrangement induced during annihilation of excess vacancies. These enhancement effects can be utilized for nano-fabrication of β-FeSi₂ by using focused ion-beam irradiation.     

Pore formation in in situ processed MgB2 superconductors

MgB₂ bulks were prepared by an in situ process which utilizes the reaction between boron and magnesium powder. The reaction time was fixed at 0.5 h and the temperature was changed from 600 °C to 1000 °C. The density decrease due to pore formation and mass (mainly magnesium) loss during the formation reaction of MgB₂ was observed in all samples. In addition to the pore formation, a pellet expansion which can be explained by the outgrowth of MgB₂ grains was also observed. Two different mechanisms were adopted to explain the pore formation; Kirkendall pores formed at a temperature below the melting point (m.p.) of magnesium by a difference in the diffusivity between magnesium and boron, and the pores formed at a temperature above the m.p. by melting of magnesium and a capillary movement. The density, T_c and J_c results suggest that the current carrying capacity can be improved by a careful control of the process parameters regarding a pore evolution.     

Bulk MgB2 superconductor with high critical current density synthesized by self-propagating high-temperature synthesis method

Pure MgBMgB2 超导体 临界密度 自我传播 预热温度 超导电性SHS method, bulk MgB₂ superconductor, superconductivityProject supported by the Natural Science Foundation of Gansu province of China (Grant No ZS032-B25-019).2005-03-187/2/2005 12:00:00 AMPure MgB2 bulk samples are successfully synthesized by self-propagatlng hlgh-temperature synthesis （SHS） method. The experiments show that the best preheating temperature is 250℃, the highest Jc values of the prepared MgB2 reach 1.5×10^6A/cm^2 （10K, 0.5T） and 1.7×10^6A/cm^2 （20K, 0T）, and the MgB2 particle sizes range from 2 to 5μm. The advantages of this method are that it is simple, economical and suitable for the manufacture of bulk MgB2 materials on industrial scale.     

Effect of fast neutron irradiation on magnetic properties of fullerene superconductor Rb3C60

Effects of fast neutron irradiation and post-annealing on magnetic properties of Rb₃C₆₀ were studied through the dc magnetization measurement. Rb₃C₆₀ powder samples were prepared in an evacuated quartz glass tube, and the temperature and the magnetic field dependences of dc magnetization were measured before and after irradiation and after post-annealing. The neutron fluences were 1.0, 1.8 and 3.3 × 10¹⁶ n/cm², and the post-annealing was made at a temperature of 473 K for 3 h. Magnetic hysteresis of the samples irradiated at the fluence of 1.8 and 3.3 × 10¹⁶ n/cm² disappeared, and the hysteresis curves hardly changed at the fluence of 1.0 × 10¹⁶ n/cm². As for the post-annealing effect, the hysteresis curves of the sample irradiated at the fluence of 1.8 × 10¹⁶ n/cm² were completely recovered after annealing, while those of the other samples, which had a magnetic background before irradiation, were not recovered. In this study, it was found that the loss of superconductivity in Rb₃C₆₀ powder is observed when the neutron irradiation fluence exceeds 1.0 × 10¹⁶ n/cm², and the lost superconductivity is completely recovered by the post-annealing at 473 K for 3 h.     

Rotational absorption spectrum of methylene fluoride in the 20–100 cm region

The pure rotational spectrum of CH₂F₂ was recorded in the 20–100 cm⁻¹ spectral range and analyzed to obtain rotation and centrifugal distortion constants. Analysis of the data yielded rotation constants: A = 1.6392173 ± 0.0000015, B = 0.3537342 ± 0.00000033, C = 0.3085387 ± 0.00000027, τ_aaaa = −(7.64 ± 0.46) × 10⁻⁵, τ_bbbb = −(2.076 ± 0.016) × 10⁻⁶, τ_cccc = −(9.29 ± 0.12) × 10⁻⁷, T₁ = (4.89 ± 0.20) × 10⁻⁶, and T₂ = −(1.281 ± 0.016) × 10⁻⁶cm⁻¹.     

Characterization of InN epilayers grown on Si(1 1 1) substrates at various temperatures by MBE

InN films have been grown by plasma-assisted molecular beam epitaxy (PAMBE) and characterized by various technologies. It was found that the structural, optical and electrical properties can be drastically improved by raising growth temperature from 440 to 525 °C. Grainy morphology was found in the grain size was found in atomic force microscope images. The large grain size was about 360 nm for a film grown at 525 °C. These films exhibited Wurtzite structure with a c/a ratio ranging from 1.59 to 1.609. The dislocation densities estimated by X-ray diffraction techniques closely agreed with those analyzed by plan-view transmission electron microscopy. Photoluminescence (PL) studies confirmed near band-to-band transitions and the narrowest low-temperature PL peak width was found to be 24 meV at 0.666 eV. Carrier concentrations decreased from 1.44×10¹⁹ to 1.66×10¹⁸ cm⁻³ and Hall mobility increased from 226 to 946 cm² V⁻¹ s⁻¹ as the growth temperature is progressively increased from 440 to 525 °C. Raman spectra also indicated improved crystal quality as the growth temperature was raised.     

Electrochemical characterization of poly(vinylidenefluoride)-zinc triflate gel polymer electrolyte and its application in solid-state zinc batteries

Gel polymer electrolyte (GPE) films comprising of poly(vinylidenefluoride), propylene carbonate, ethylene carbonate and zinc trifluoromethane sulfonate are prepared and characterized. The composition of GPE is optimized to contain minimum liquid components with a maximum specific conductivity of 3.94×10⁻³ S cm⁻¹ at (25±1) °C. A detailed investigation on the properties such as ionic conductivity, transport number, electrochemical stability window, reversibility of Zn/Zn²⁺ couple and Zn/gel electrolyte interfacial stability have been carried out. The ionic conductivity follows a VTF behaviour with an activation energy of about 0.0014 eV. Cationic transport number varies from 0.51 at 25 °C to 0.18 at 70 °C. Several cells have been assembled with GPE as the electrolyte, zinc as the anode, γ-MnO₂ as the cathode and their charge–discharge behaviour followed. Capacity values of 105, 82, 64 and 37 mAh/g of MnO₂ have been achieved at 10, 50, 100 and 200 μA/cm² discharge current densities, respectively. The discharge capacity values are almost constant for about 55 cycles for all values of current densities. Cyclic voltammetric study of MnO₂ electrode in Zn/GPE/MnO₂ cell clearly shows intercalation/deintercalation of Zn²⁺.     

Elementary reactions of formyl (HCO) radical studied by laser photolysis—transient absorption spectroscopy

Several elementary reactions of formyl radical of combustion importance were studied using pulsed laser photolysis coupled to transient UV–Vis absorption spectroscopy: HCO → H + CO (1), HCO + HCO → products (2), and HCO + CH₃ → products (3). One-pass UV absorption, multi-pass UV absorption as well as cavity ring-down spectroscopy in the red spectral region were used to monitor temporal profiles of HCO radical. Reaction (1) was studied over the buffer gas (He) pressure range 0.8–100 bar and the temperature range 498–769 K. Reactions (2a), (2b), (2c), (3a) and (3b) as well as the UV absorption spectrum of HCO, were studied at 298 and 588 K, and the buffer gas (He) pressure of 1 bar. Pulsed laser photolysis (308, 320, and 193 nm) of acetaldehyde, propionaldehyde, and acetone was used to prepare mixtures of free radicals. The second-order rate constant of reaction (1) obtained from the data at 1 bar is: k₁(He) = (0.8 ± 0.4) × 10⁻¹⁰exp(−(66.0 ± 3.4) kJ mol⁻¹/RT) cm³ molecule⁻¹ s⁻¹. The HCO dissociation rate constants measured in this work are lower than those reported in the previous direct work. The difference is a factor of 2.2 at the highest temperature of the experiments and a factor of 3.5 at the low end. The experimental data indicate pressure dependence of the rate constant of dissociation of formyl radical 1, which was attributed to the early pressure fall-off expected based on the theory of isolated resonances. The UV absorption spectrum of HCO was revised. The maximum absorption cross-section of HCO is (7.3 ± 1.2) × 10⁻¹⁸ cm² molecule⁻¹ at 230 nm (temperature independent within the experimental error). The measured rate constants for reactions (2a), (2b), (2c), (3a) and (3b) are: k₂ = (3.6 ± 0.8) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹ (298 K); k₃ = (9.3 ± 2.3) × 10⁻¹¹ cm³ molecule⁻¹ s⁻¹(298 and 588 K).     

Spectral characterization and energy levels of Cr:Sc2(MoO4)3 crystal

This paper reports the spectral properties and energy levels of Cr³⁺:Sc₂(MoO₄)₃ crystal. The crystal field strength Dq, Racah parameter B and C were calculated to be 1408 cm⁻¹, 608 cm⁻¹ and 3054 cm⁻¹, respectively. The absorption cross sections σ_α of ⁴A₂→⁴T₁ and ⁴A₂→⁴T₂ transitions were 3.74×10⁻¹⁹ cm² at 499 nm and 3.21×10⁻¹⁹ cm² at 710 nm, respectively. The emission cross section σ_e was 375×10⁻²⁰ cm² at 880 nm. Cr³⁺:Sc₂(MoO₄)₃ crystal has a broad emission band with a broad FWHM of 176 nm (2179 cm⁻¹). Therefore, Cr³⁺:Sc₂(MoO₄)₃ crystal may be regarded as a potential tunable laser gain medium.     

Influence of different mixing ratios of Mg and B powder on structural and superconducting properties in MgB2

We fabricated MgB₂ bulks by an in situ Mg diffusive reaction method from compacted B and compacted mixtures of Mg and B respectively. All samples were sintered at 1100 °C for 2 h. MgO impurity phase, density, and critical current density (J_c) were found to be dependent of the starting amount of mixing Mg powder. We also found that the MgO formation in MgB₂ matrix was not mainly attributed to the starting amount of additional Mg powder for Mg diffusive reaction. This indicates that MgO presented in the starting Mg powder is hardly diffused into compacted B.     

B4C in ex-situ spark plasma sintered MgB2

Powder mixtures of MgB₂ and B₄C with composition ((MgB₂) + (B₄C)_x, x = 0.005, 0.01, 0.03) were consolidated by Spark Plasma Sintering at 1150 °C for 3 min. The average particle size of B₄C raw powder was relatively high of 4 μm. Despite this, it is shown that processing processes are fast and, as in the case of the in-situ routes, for our ex-situ method carbon substitutes for the boron in the crystal lattice of MgB₂. Specifics of microstructure are discussed based on electron microscopy observations. Carbon substitution and microstructure contribute to enhancement of the critical current density J_c at high magnetic fields and of the irreversibility field H_irr. Samples are shown to be in the point pinning limit with some tendency toward the grain boundary pinning depending on B₄C doping amount and temperature. An optimum composition is found for x = 0.01: for this sample, at 20 K, a J_c of 100 A/cm² is obtained at 5.35 T. This value is higher than for the pristine MgB₂ sample and for an optimum ex-situ nano-SiC-doped sample obtained for the same SPS processing conditions.     

Effect of oxygen partial pressure on the structural and optical properties of dc reactive magnetron sputtered molybdenum oxide films

Molybdenum oxide films (MoO₃) were deposited on glass and crystalline silicon substrates by sputtering of molybdenum target under various oxygen partial pressures in the range 8 × 10⁻⁵–8 × 10⁻⁴ mbar and at a fixed substrate temperature of 473 K employing dc magnetron sputtering technique. The influence of oxygen partial pressure on the composition stoichiometry, chemical binding configuration, crystallographic structure and electrical and optical properties was systematically studied. X-ray photoelectron spectra of the films formed at 8 × 10⁻⁵ mbar showed the presence of Mo⁶⁺ and Mo⁵⁺ oxidation states of MoO₃ and MoO_3−x. The films deposited at oxygen partial pressure of 2 × 10⁻⁴ mbar showed Mo⁶⁺ oxidation state indicating the films were nearly stoichiometric. It was also confirmed by the Fourier transform infrared spectroscopic studies. X-ray diffraction studies revealed that the films formed at oxygen partial pressure of 2 × 10⁻⁴ mbar showed the presence of (0 k 0) reflections indicated the layered structure of α-phase MoO₃. The electrical conductivity of the films decreased from 3.6 × 10⁻⁵ to 1.6 × 10⁻⁶ Ω⁻¹ cm⁻¹, the optical band gap of the films increased from 2.93 to 3.26 eV and the refractive index increased from 2.02 to 2.13 with the increase of oxygen partial pressure from 8 × 10⁻⁵ to 8 × 10⁻⁴ mbar, respectively.     

利用电泳法在金属基底上制备MgB2超导厚膜

利用电泳技术在高熔点金属基底Ta，Mo和W上制备MgB₂超导厚膜.厚膜中的MgB2晶粒结合紧密，粒度小于1μm，呈随机取向生长.电阻测量表明沉积在Ta，Mo，W上的MgB₂厚膜的超导起始转变温度分别为36.5K，34.8K，33.4K，对应的转变宽度为0.3K，1.5K和2.0K.三种基底上制备的MgB₂厚膜的临界电流密度在不同温度下随外磁场的变化情况 基本相同，MgB₂/Mo厚膜的临界电流密 关键词： 2超导厚膜')" href="#">MgB₂超导厚膜 电泳 金属基底