The thermodynamic studies of the molecular interactions of methyltin(IV) tribromide with free base meso-tetraarylporphyrins

The thermodynamic parameters for the interactions of MeSnBr₃ with para- and meta-substituted meso-tetraphenylporphyrins (H₂T(4-X)PP; X=OCH₃, CH₃, H, Cl, NO₂ and H₂T(3-X)PP; X=CH₃, Cl) have been studied. The formation constants have been elucidated by using spectrophotometric titration and computer squad program data refinement. The adducts of composition 2:1 and 1:1 of MeSnBr₃ to H₂T(4-X)PP with stability constants K₁ and K₂ coexist in solution, but meta-substituted porphyrins form adducts of the composition 1:1 of MeSnBr₃ to H₂T(3-X)PP with stability constant K₁. Formation constants decrease with decreasing electron donation of para-substituted porphyrins as follow: H₂T(4-CH₃O)PP>H₂T(4-CH₃)PP>H₂TPP>H₂T(4-Cl)PP>H₂T(4-NO₂)PP. Despite the electron donation of the methyl group, H₂T(3-Cl)PP forms more stable adducts than H₂T(3-CH₃)PP with MeSnBr₃.     

Thermodynamic study of complex formation process of free base meso-tetraphenylporphyrins with dimethyl and dibutyltin(IV) dichloride: a new algorithm for a single thermometric titration

A novel, fast and easy single sample measurement has been developed based upon temperature dependence of equilibrium constant in order to determine the enthalpy and entropy changes of a complexation reaction using spectrophotometric temperature titration. The method can be used in determination of the formation constant and thermodynamic parameters of the solutions that there are difficulties in their titration where volatile compounds are studying. Knowledge of component spectra is not required for the analysis. The formation constants of the interactions of ß-di and tri-brominated meso-tetraphenylporphyrins, and meso-tetrakis(4-methylphenyl) and (4-methoxyphenyl) porphyrins with Me₂SnCl₂ and Bu₂SnCl₂, have been determined in range of 0–25 °C utilizing van’t Hoff relation, mass balance and equilibrium constant equations by an iterative least squares method with ΔH ⁰ as adjustable parameter. The outputs of analysis are the equilibrium constants, ligand and adduct spectral profiles, their concentrations as a function of temperature, the adjusted values of the standard enthalpy ΔH ⁰, and entropy ΔS ⁰ changes. The order of formation constants of the resulting 1:1 complexes decreased with increasing number of bromide substituents and increased with adding methyl and methoxy groups, and vary as H₂T(4-CH₃O)PP > H₂T(4-CH₃)PP > H₂TPP > H₂TPPBr₂ > H₂TPPBr₃ and Me₂SnCl₂ > Bu₂SnCl₂.     

Spectrophotometric studies of the thermodynamics of sitting-atop complexation between free base meso-tetraarylporphyrins and titanium(IV) chloride

Titanium(IV) chloride reacts with free base meso-tetraarylporphyrin and its ortho, meta and para-substituted derivatives (H₂T(X)PP; X: OCH₃, CH₃ and Cl) for formation of sitting-atop (SAT) complexes, [TiCl₄(H₂T(X)PP)]. The computer fitting of the variation of the absorbance versus mole ratio by KINFIT program was used for calculation of the formation constants of these complexes in chloroform. Thermodynamic parameters, ΔG°, ΔH°, ΔS°, have been determined and the influence of the temperature and the substituted aryl groups (electronic and steric effects) in the free base porphyrins on the stability of the SAT complexes was studied.     

Spectrophotometric Studies of the Thermodynamics of Molecular Complexation between Free Base Meso-Tetraarylporphyrins and Iodine(III) Chloride

A spectrophotometric method was used for the molecular complexation of ICl₃ with para-substituted meso-tetraarylporphyrins (H₂t(4-X)pp; X: OCH₃, CH(CH₃)₂, CH₃, H and Cl) in methanol/chloroform (2.5% v/v) solution. The equilibrium constants and the thermodynamic parameters were measured spectrophotometrically at various temperatures for 1:1 molecular complex formation of meso-tetraarylporphyrins as electron donors with ICl₃ as the electron acceptor. The formation constants for the molecular complexes change according to the following trend: [ICl₃(H₂t(4-OCH₃)pp)]>[ICl₃(H₂t(4-CH(CH₃)₂)pp)]>[ICl₃(H₂t(4-CH₃)pp)]>[ICl₃(H₂tpp)]>([ICl₃(H₂t(4-Cl)pp)]. Further, the thermodynamic parameters, ΔG ^o,ΔH ^o and ΔS ^o, for formation of the complexes were obtained.     

Thermodynamic studies of sitting-atop (SAT) complexation of uranyl and free base meso -tetraarylporphyrins

The interaction of uranyl with meso-tetraphenylporphyrin and its para-substituted derivatives (H₂t(4-X)pp, X : H, Br, Cl, CH(CH₃)₂, OCH₃, CH₃) in chloroform produced 1 : 1 sitting-atop (SAT) complexes ((uranyl)H₂t(4-X)pp). Formation constants were calculated by computer fitting of complex absorbance versus mole ratio data to appropriate equations and found to decrease with temperature increase. Thermodynamic parameters, ΔG ⁰, ΔH ⁰ and ΔS ⁰ were obtained. The formation constants vary with changing of the substituent on the aryl rings of H₂t(4-X)pp in the following order: (uranyl)H₂t(4-OCH₃)pp?>?(uranyl)H₂t(4-CH₃)pp?>?(uranyl)H₂t(4-CH(CH₃)₂)pp?>?(uranyl)H₂tpp?>?(uranyl)H₂t(4-Br)pp?>?(uranyl)H₂t(4-Cl)pp.     

Thermodynamic studies of sitting-atop complexation between free base meso-tetraarylporphyrins and antimony(III) chloride in chloroform

Interaction of para, meta and ortho-substituted meso-tetraarylporphyrins, (H₂t(X)pp, X: OMe, Me, H and Cl) with SbCl₃ in chloroform solution afforded 1 : 1 sitting-atop (SAT) complexes ([(SbCl₃)(H₂t(X)pp)]). The formation constants were calculated by KINFIT and found to decrease with increasing temperature. The thermodynamic parameters, ΔH°, ΔS° and ΔG°, were obtained. Formation constants of these complexes change with changing substituent (X) on the aryl rings of H₂t(X)pp in the following order: (SbCl₃)H₂t(4-OMe)pp >?(SbCl₃)H₂t(4-Me)pp >?(SbCl₃)H₂tpp >?(SbCl₃)H₂t(4-Cl)pp >?(SbCl₃)H₂t(3-OMe)pp >?(SbCl₃)H₂t(3-Me)pp> (SbCl₃)H₂t(2-OMe)pp >?(SbCl₃)H₂t(2-Me)pp.     

Novel Copolymers of 4-Fluorostyrene. 9. Some Ring-Disubstituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-disubstituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₃CH=C(CN)₂ (where R = 3-Br-4-CH₃O, 5-Br-2-CH₃O, 2-F-5-CH₃, 2-F-6-CH₃, 3-F-2-CH₃, 3-F-4-CH₃, 4-F-2-CH₃, 4-F-3-CH₃) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3-F-4-CH₃(1.64) > 5-Br-2-CH₃O (1.62) > 3-Br-4-CH₃O (1.36) > 4-F-2-CH₃(1.3) > 4-F-3-CH₃(1.26) > 3-F-2-CH₃(1.11) > 2-F-5-CH₃ (0.98) > 2-F-6-CH₃ (0.97). High T_g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 290–400°C range with residue, which then decomposed in 400–800°C range.     

Synthesis, structural characterization of some germanium substituted chiral diethyltin derivatives

Some new bimetallic carboxylates of tin and germanium with general formula where R¹ = m-CH₃C₆H₄, p-CH₃C₆H₄, C₆H₅, R² = o-CH₃C₆H₄, p-CH₃C₆H₄, o-CH₃OC₆H₄, C₆H₅, CH₃, have been prepared by the condensation reaction of diethyltin oxide and triarygermyl(substituted)propanoic acid in 1:2 mole ratio, respectively, and characterized by multinuclear (¹H, ¹³C, ¹¹⁹Sn) NMR, ^119mSn Mössbauer and IR spectroscopy. The X-ray crystal structure of the ligand I₄ [(C₆H₅)₃GeCH(o-CH₃OC₆H₄)CH₂COOH] delineate four coordinated germanium atom with a peculiarity of having a molecule of solvent (CHCl₃). The chiral center in the synthesized compounds was identified on the basis of ¹H NMR data and measurements of angle of rotations.     

Novel Copolymers of Styrene. 8. Some Ring-Disubstituted Ethyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, ring-disubstituted ethyl 2-cyano-3-phenyl-2-propenoates, RPhCH?C(CN)CO₂C₂H₅ (where R is 3-Br-4-CH₃O, 5-Br-2-CH₃O, 3-F-2- CH₃, 3-F-4-CH₃, 4-F-2-CH₃, 4-F-3-CH₃, 5-F-2-CH₃, 2-Cl-5-NO₂, 2-Cl-6-NO₂, 4-Cl-3- NO₂) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-disubstituted benzaldehydes and ethyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 5-Br-2-CH₃O (1.02) > 4-Cl-3-NO₂ (0.93) > 3-F-4-CH₃ (0.81) > 2-Cl-6-NO₂ (0.77) > 2-Cl-5-NO₂ (0.71) > 3-Br-4-CH₃O (0.66) > 4-F-3-CH₃ (0.60) > 3-F-2-CH₃ (0.38) > 4-F-2-CH₃ (0.31) > 5-F-2-CH₃ (0.16). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 250–500°C range with residue (2–26% wt.), which then decomposed in the 500–800°C range.     

Kinetics and mechanism of zinc(II), cadmium(II), and mercury(II) incorporation into meso tetrameta-tolueneporphyrin

The kinetics of Zn(II), Cd(II), and Hg(II) incorporation into meso tetrameta-tolueneporphyri n (H₂T(m-CH₃)PP) in acetone have been studied by means of stopped-flow method. A unified reaction mechanism was proposed and the kinetic parameters were obtained by nonlinear least-square methods. The effect of ionic strength (I) on Cd(II)/H₂T(m-CH₃)PP was investigated. It has been found that there is a negative kinetic salt effect and the relationship of rate constants with ionic strength was obtained. Some solvent effects have also been investigated in this article. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 277–283, 1998.     

Pulsed fourier transform NMR of substituted aryltrimethyltin derivatives : II. (119Sn-13C) coupling constants and 13C chemical shifts of meta- and para-derivatives

Carbon-13 NMR data are reported for thirteen para- and meta-substituted phenyltrimethyltin compounds, RC₆H₄Sn(CH₃)₃, where R = para-N(CH₃)₂, para-OCH₃, para-OC₂H₅, para-CH₃, meta-CH₃, -H, para-F, meta-OCH₃, para-Cl, para-Br, meta-F, meta-Cl and para-Sn(CH₃)₃. In the para-derivatives, correlation coefficients with Hammet σ-constants of greater than ca. 0.9 are obtained with the tin-carbon couplings to methyl, C₁ and C₄ carbons, and with the carbon-13 chemical shifts δ(C(1)). In the meta-derivatives, the couplings |J(Sn-CH₃)|:, |:J(Sn-C(1))|:, |:J(Sn-C(3))|: and |:J(Sn-C(6))|:, and the shifts δ(C(1)) and δ(C(5)) correlate well with Hammett σ. In the para-derivatives, sensitivity to change in substituent falls off C(4) > C(3, 5) > C(1) > C(2, 6) > CH₃ as registered by the δ(C), while in the meta-derivatives δ(C) changes decrease C(3) > C(2), C(4) > C(1) > C(5), C(6) > CH₃. The magnitudes of the tin coupling constants decrease C(1) > CH₃ > C(3, 5) > C(2, 6) > C(4) in the para-derivatives, while in the meta-series the order is C(1) > CH₃ > C(3), C(5) > C(2) > C(6) > C(4). The two sets of one-bond |:J(Sn-CH₃)|: and |:J(Sn-C(1)|: values correspond closely to the 0.25/0.33 ratio of coefficients in the LCAO approach, and are interpreted in terms of s-electron redistributions at the tin atom with change in substituent.     

Novel Copolymers of Styrene. 3. Some Ring-Substituted Butyl 2-Cyano-3-Phenyl-2-Propenoates

Novel trisubstituted ethylenes, ring-substituted butyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂C₄H₉ (where R is 2-C₆H₅CH₂O, 3-C₆H₅CH₂O, 4-C₆H₅CH₂O, 4-CH₃COO, 3-CH₃CO, 4-CH₃CO, 4-CH₃CONH, 2-CN, 3-CN, 4-CN, 4-(CH₃)₂N, 4-(C₂H₅)₂N) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and butyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 4-C₆H₅CH₂O (6.39) > 2-C₆H₅CH₂O (2.06) > 3-CH₃CO (1.86) > 3-C₆H₅CH₂O (1.78) > 4-CH₃COO (1.58) > 3-CN (1.47) > 4-CN (1.21) > 4-(C₂H₅)₂N (1.19) > 4-(CH₃)₂N (1.18) > 2-CN (1.04) > 4-CH₃CO (0.71) > 4-CH₃CONH (0.63). Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3.6–9.5% wt), which then decomposed in the 500–800°C range.     

Exchange of organometallic compounds with mercury metal : VI. Substituted diarylthallium cations; evidence for intermediate ArTl+HgAr species

Substituted diphenylthallium chlorides, (XC₆H₄)₂T1C1 (X = p-OCH₃, p-CH₃, m-CH₃, H, p-Cl, p-CH₃COO) have been prepared. Polarography and chronopotentiometry were used for study of electrochemical reduction and interaction of these compounds with mercury metal. Intermetallic cations, ArTl⁺HgAr, were shown to be intermediates in the transmetallation reaction between Ar₂Tl⁺ and mercury metal:

     

Novel Copolymers of Styrene. 15. Phenoxy Ring-Substituted Methyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, phenoxy ring-substituted methyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂CH₃, where R is 4-(4-BrC₆H₅O), 2-(4-ClC₆H₅O), 3-(4-ClC₆H₅O), 4-(3-ClC₆H₅O), 4-(4-ClC₆H₅O), 4-(4-FC₆H₅O), 2-(3-CH₃OC₆H₅O), 2-(4-CH₃OC₆H₅O), 3-(4-CH₃OC₆H₅O), 4-(4-CH₃OC₆H₅O), 3-(4-CH₃C₆H₅O) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of phenoxy ring-substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 4-(4-CH₃OC₆H₅O) (6.07) > 3-(4-ClC₆H₅O) (3.38) > 3-(4-CH₃OC₆H₅O) (2.78) > 4-(3-ClC₆H₅O) (2.77) > 2-(4-ClC₆H₅O) (2.29) > 3-(4-CH₃C₆H₅O) (1.98) > 4-(4-FC₆H₅O) (1.92) > 4-(4-ClC₆H₅O) (1.89) > 2-(3-CH₃OC₆H₅O) (1.39) > 2-(4-CH₃OC₆H₅O) (0.90) > 4-(4-BrC₆H₅O) (0.77). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200-500°C range with residue (2.5-8.0% wt), which then decomposed in the 500-800°C range.     

Synthesis, crystal structures and in vitro antitumor activities of some arylantimony derivatives of analogues of demethylcantharimide

A series of novel arylantimony derivatives of analogues of demethylcantharimide with the formulae Ar_nSbL_(5−n) and Ar_nSbL^′_(5−n)(LH=N-hydroxy-demethyldehydrogencantharimide, L^′H=N-hydroxy-demethylcantharimide, n=3, 4; ArC₆H₅, 4-CH₃C₆H₄, 3-CH₃C₆H₄, 2-CH₃C₆H₄, 4-ClC₆H₄, 4-FC₆H₄) were synthesized and characterized by elemental analysis, IR, ¹H NMR and mass spectroscopy. The crystal structures of (C₆H₅)₄SbL, (4-CH₃C₆H₄)₃SbL₂ and (3-CH₃C₆H₄)₃SbL^′₂ were determined by X-ray diffraction. The in vitro antitumor activities of all compounds against six cancer cells are reported.     

Substitution effects at α-position of divalent five-membered ring XC4H3M (M = C, Si and Ge)

Full geometry optimizations were carried out on singlet and triplet states of α-substitued divalent five-membered rings XC₄H₃M (X = -NH₂, -OH, -CH₃ -H, -CH₃, -Br, -Cl, -F, -CF₃ and -NO₂; M = C, Si and Ge) by B3LYP method using 6-311++G** basis set. Thermal energy gaps, ΔE_s-t; enthalpy gaps, ΔH_s-t; Gibbs free energy gaps, ΔG_s-t, between singlet (s) and triplet (t) states of above structures were calculated using the GAUSSIAN 03 program. The ΔG_s-t of XC₄H₃C was changed in the order: X = -Cl > -Br > -CH₃ > -H > -CF₃ > -F > -NO₂ > -OH > -NH₂. The changes of ΔG_s-t for XC₄H₃Si and XC₄H₃Ge were in the order: X = -NH₂ > OH > F > Cl > Br > CH₃ > H > CF₃ > NO₂. The relationship between all the parameters such as different energy types, geometry parameters, natural bonding orbital (NBO) charge at atoms, HOMO and LUMO energies, chemical hardness (η), chemical potential (μ), dipole Moment (D), electrophilicity (ω) and the maximum amount of electronic charge, ΔN_max, was presented and discussed.     

Novel Copolymers of Styrene and Some Ring-substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₄CH = C(CN)2 (where R is 2-F, 2-CN, 3-CN, 4-CN, 3-C₆H₅O, 4-C₆H₅O, 2-C₆H₅CH₂O, 3-C₆H₅CH₂O, 4-C₆H₅CH₂O, 4-CH₃CO₂, 4-CH₃CONH, 4-(CH₃)₂N) and styrene were prepared by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 4-(CH₃)₂N (3.35) > 4-C₆H₅CH₂O (3.1) > 2-C₆H₅CH₂O (1.77) > 3-C₆H₅CH₂O (1.72) > 4-C₆H₅O (1.70) > 4-CH₃CO₂ (1.58) > 2-F (1.11) > 3-C₆H₅O (0.90) > 3-CN (0.88) > 2-CN (0.86) > 4-CH₃CONH (0.84) > 4-CN (0.76). Relatively high T_g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (1–10% wt), which then decomposed in the 500–800°C range.     

Novel Copolymers of 4-Fluorostyrene. 10. Some Ring-substituted 2-Phenyl-1,1-dicyanoethylenes

Novel copolymers of trisubstituted ethylene monomers, ring-substituted 2-phenyl-1,1-dicyanoethylenes, RC₆H₂CH=C(CN)₂ (where R is 4-C₆H₅O, 2-C₆H₅CH₂O, 3,4-(C₆H₅CH₂O)₂, 2-C₆H₅CH₂O-3-CH₃O, 3-C₆H₅CH₂O-4-CH₃O, 2-Cl-6-NO₂, 4-Cl-3-NO₂, 5-Cl-2-NO₂) and 4-fluorostyrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (ABCN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 3,4-(C₆H₅CH₂O)₂(31.0) > 2-C₆H₅CH₂O-3-CH₃O (24.8) > 3-C₆H₅CH₂O-4-CH₃O (15.2) > 4-C₆H₅O (3.1) > 4-Cl-3-NO₂ (1.9) > 2-Cl-6-NO₂ (1.6) > 5-Cl-2-NO₂ (1.5) > 2-C₆H₅CH₂O (1.4). High T_g of the copolymers, in comparison with that of poly(4-fluorostyrene) indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 270-400°C range with residue, which then decomposition in 400–800°C range.     

Advantages of the Ns group in the reactions of N-SO2R inosines with benzylamine and with NH3

The reactivity of N¹-alkylsulfonyl- and N¹-arylsulfonyl-2′,3′,5′-tri-O-acetylinosine with benzylamine and with ¹⁵NH₃, regarding the attack on C2, has been shown to be in the order CF₃SO₂ (Tf) > 2,4-(NO₂)₂C₆H₃SO₂ (DNs) ? 4-NO₂C₆H₄SO₂ (pNs) ≈ C₆F₅SO₂ (PFBs) > 2-NO₂C₆H₄SO₂ (Ns) ? CH₃SO₂ (Ms) > 4-CH₃C₆H₄SO₂ (Ts) > 2,4,6-(CH₃)₃C₆H₂SO₂ (Mts). In spite of its intermediate reactivity, the Ns group is the most appropriate, since in this case the formation of by-products is minimised during the ring-opening and ring-closing steps of the process. Another advantage of the Ns group is thus disclosed.     

Novel Copolymers of Styrene. 12. Halogen Ring-Substituted Methyl 2-Cyano-3-Phenyl-2-Propenoates

Electrophilic trisubstituted ethylenes, halogen ring-substituted methyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂CH₃ (where R is 3-Br-4-CH₃O, 5-Br-2-CH₃O, 2-F-5-CH₃, 2-F-6-CH₃, 4-F-3-CH₃, 4-F-3-PhO, 2-F-5-I, 2-F-6-I, 2-F₃C, 4-F₃C) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r ₁) for the monomers is 2-F-5-CH₃ (6.4) > 4-F-3-PhO (5.6) > 4-F₃C (4.8) > 3-Br-4-CH₃O (3.7) > 2-F-5-I (3.6) > 2-F₃C (2.2) > 2-F-6-I (2.1) > 5-Br-2-CH₃O (1.9) > 4-F-3-CH₃ (1.8) > 2-F-6-CH₃ (1.2). Relatively high T _g of the copolymers in comparison with that of polystyrene indicates a decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200-500°C range with residue (2–21% wt), which then decomposed in the 500–800°C range.