Potentiometric study of the formation of hydroxo complexes of [Cu(terpy)]2+. Synthesis and crystal structure of [Cu(terpy) (H2O)](CF3SO3)2

Two complexes of formula [Cu(terpy)(H₂O)](CF₃SO₃)₂ (1) and [Cu(terpy)(OH)]BPh₄ (2) (terpy=2,2′∶6′,2″-terpyridine and BPh₄=tetraphenylborate anion) have been synthesized and characterized by spectroscopic techniques. The x-ray crystal structure of (1) has been determined by x-ray diffraction. The structure is made up of [Cu(terpy)(H₂O)]²⁺ mononuclear cations plus semi-coordinated CF₃SO₃ ⁻ anions. The coordination geometry around the copper atom is approximately elongated tetragonal octahedral. The oxygen atom of water and the three nitrogen atoms of terpy occupy the equatorial sites whereas the apical ones are filled by trifluoromethanesulphonate oxygen atoms. The formation of hydroxo complexes of [Cu(terpy)(H₂O)]²⁺ has been investigated by potentiometry in aqueous solutions and the constants of the Equilibria (1) and (2)      

Heteroorganic betaines

The [Ph₃P⁺−CMe₂−SiMe₂−SEt]Br⁻ salt was prepared by the reaction of betaine Ph₃P⁺−CMe₂SiMeR−S⁻ (1a: R=Me) with EtBr. Acetylation of betaine1a or Et₃P⁺−CHMeSiMe₂−S⁻ (2a) afforded 2,2,6-trimethyl-1,3-dioxa-2-silacyclohex-5-ene-4-thione      

UV photolysis of protonated ruthenium and osmium decamethylmetallocenes as a new method for synthesis of the metallonium cations

Decamethylmetallocenes Cp^* ₂M (M=Ru, Os) in the presence, of acids (CF₃CO₂H, CF₃SO₃H) give thepprotonation products [Cp^* ₂MH]⁺An⁻. Broad-band UV photolysis of their solutions results in the formation of the salts of onium cations . A preparative procedure for the synthesis of these salts has been developed. Hydrolysis of the salts gives the carbinol Cp^*MC₅Me₄CH₂OH. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 587–591. March, 1999.     

Reaction of Ru3(CO)12 with 1,3-diferrocenylprop-2-ene-1-one. Crystal and molecular structures of the complexes Ru3(CO)8(FcC=CHCOFc)2 and [Ru(CO)2Cl(FcC=CHCOFc)]2

The reaction of Ru₃(CO)₁₂ with 1,3-diferrocenylprop-2-en-1-one,trans-FcCH=CHCOFc (where Fc is ferrocenyl), in boiling hexane afforded the complex (2c), which was converted into (3c) upon further heating. These complexes gave the complex (4) containing two Cl-bridged oxaruthenacycles upon dissolution in CHCl₃ or CH₂Cl₂. The structures of complexes 3 and 4 were established by X-ray diffraction analysis. According to the data of¹H NMR spectroscopy, the Cl-bridged complex exists in solutions as a mixture of isomers along with the monomeric form resulting from the cleavage of the halide bridges. All interconversions of the isomers occur with the participation of the monomeric form. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1616–1623, September, 2000.     

Ab initio study of the complexes of first-row transition-metal ions with CH, CH2, and CH3

The geometries and bonding characteristics of the complexes of the first-row transition-metal ions with CH, CH₂ and CH₃ were investigated byab initio molecular orbital theory. MCH⁺ and MCH₂ ⁺ are linear and coplanar, respectively. Both of them are with obvious treble or double bond characteristics, but these multiple bonds are mostly “imperfect”. The calculated bond dissociation energies of , and are mostly close to the experimental values, and appear in similar periodic trends from Sc to Zn. Project supported by the National Natural Science Foundation of China (Grant No. 29170070).     

A new type of polarographic catalytic wave of organic compound

The polamgraphic behavior and catalytic wave mechanism of medroprogestemne acetate (MPA) were studied in both aqueous and DMF media. In 0.2 mol/L acetic acid-sodium acetate (pH 5.0) buffer solution, the bond of MPA first undergoes le, lH⁺ reduction to form protonated free radical HMPA, the further reduction of HMPA in le,1H⁺ process is simultaneous with the dimerization reaction between HMPA and neutral molecular MPA. In DMF media containing 0.1 mol/L tetrabutylammonium tetrafluoborate (TBA.BF₄), the bond of MPA shows two le, 1H⁺reduction waves, which are ascribed to the reduction of MPA and free radical MPA.^-, respectively. Here, no dimerization reaction occurs. These processes produce the reduction wave of MPA. In the presence of oxidant KIO₃,a polamgraphic catalytic wave of MPA is observable due to a chemical reaction between HMPA. or MPA.^- and KIO₃ as well as its intermediate species to regenerate MPA. The catalytic wave, which is caused by the reduction of organic compound itself and the chemical reaction between oxidant and organic intermediate free radical to regenerate original organic compound, is a new-type wave of organic compound. Under optimum experimental conditions, the sensitivity of MPA catalytic wave in the presence of KIO₃ is an order of magnitude higher than that of its reduction wave. The catalytic wave can be used for analytical purpose. The calculated rate constant of catalytic reaction is 1.7 × 10³ mol·L^-1·s^-1. Project supported by the National Natural Science Foundation of China (Grant No. 29875017).     

Ruthenium(III) catalysis in the reaction of hexacyanoferrate(III) and iodide ions in perchloric acid medium

RuCl₃ can further catalyze the reaction between hexacyanoferrate(III) and iodide ions, which is already catalyzed by the hydrogen ions obtained from perchloric acid. Rate, when the reaction is catalyzed only by the hydrogen ions, was separated graphically from the rate when ruthenium(III) and H⁺ ions both catalyze the reaction. Reactions studied separately in the presence as well as in the absence of RuCl₃ under similar conditions were found to follow second order kinetics w.r.t. [I⁻]. While the rate showed direct proportionality w.r.t. [Fe(CN)₆]³⁻ and [RuCl₃]. At low concentrations the reaction shows direct proportionality with respect to [H⁺] which tends to become proportional to the square of hydrogen ion concentrations. External addition of [Fe(CN)₆]⁴⁻ ions retards the reaction velocity while change in ionic strength of the medium has no effect on the rate. With the help of the intercept of the catalyst graph, extent of the reaction, which takes place without adding ruthenium(III) was calculated and it was in accordance with the values obtained from the separately studied reaction in which only H⁺ ions catalyze the reaction. It is proposed that ruthenium forms a complex, which slowly disproportionates into the rate-determining step. Arrhenius parameters at four different temperatures were also calculated.      

Heteroorganic betaines

Photolysis and thermal decomposition of betaines R₃P−CR¹R²−SiR³R⁴−S⁻ (1) follows two main pathways: (a) a Corey—Chaykovsky type reaction with elimination of Ph₃P and generation of silathiirane (2) and (b) a retro-Wittig type reaction accompanied by elimination of R₃P=CR¹R² and generation of silanethione R³R⁴Si=S (3). Highly reactive compounds2 and3 undergo subsequent transformations to give derivatives of tetrahydro-1,4-dithia-2,5-disilin, 1,3-dithia-2,4-disilolane, and phosphonium salts ofsymm-tetraorganodisilthiane dithiolates [Ph₃P⁺CHR¹R²]₂[(R³R⁴SiS⁻)₂S]. The structures of the compounds obtained were established by X-ray diffraction analysis and multinuclear NMR spectroscopy. For part 3, see Ref. 1. The betaines Et₃P⁺CHMeSiMe₂S⁻ and Et₃P⁺CHMeSiPh₂S⁻ with alkyl groups at the phosphorus atom are distinguished by high thermal stability; their spectral characteristics do not change during storage of solutions of these compounds in pyridine-d₅ or metastable solutions in benzene-d₆ for 1–2 years at −20°C in sealed evacuated tubes or on heating (150°C) for 15 h. Published inIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1594–1603, September, 2000.     

Structural transformations during the gas chromatography of carbamates

Summary There is no apparent paucity of examples illustrative of the structural changes observed during the gas chromatography of diverse carbamates and thiocarbamates. In many cases the resultat thermal degradation products observed are analogous in some measure to the three possible modes of decomposition reported in nonchromatographic thermal studies for N-phenyl carbamates [4, 35, 36], e.g., Dyer andWright [35] have shown that when R is a primary or secondary alkyl group, all three modes of decomposition can occur when the reaction is carried out in the absence of solvents. If the amine and isocyanate products are allowed to remain in the formation mixture, diphenyl urea is also formed, viz., As has been shown, the thermal and hydrolytic stabilities of carbamates exhibit a marked dependence upon the degree and type of N-substitution. Disubstituted carbamates are quite resistant to thermal decomposition (as well as hydrolysis). Monosubstituted carbamates readily undergo thermal decomposition at elevated temperatures to yield primarily the respective isocyanate while unsubstituted carbamates have been reported to decompose to allophanates, cyanuric acid, and alcohol [37]. The thermal decomposition of unsubstituted carbamates is accelerated appreciably in the presence of eventrace amounts of metal salts, giving rise to the formation of cyamelide. The degradative scheme for the diol dicarbamates (as typified by the medicinal carbamates, meprobamate and soma) is more difficult to interpret.Paquin [38] reported that the pyrolysis of the dicarbamate of 1,3-butylene glycol (I), yielded an oxazolidone (II) and a cyclic urea (III) as follows: The further degradation of compounds II and III under pyrolytic conditions remains a distinct possibility.

---

Strukturumwandlungen w?hrend der Gas-Chromatographie von Carbamaten

Zusammenfassung Es besteht offenbar kein Mangel an Beispielen für Strukturumwandlungen w?hrend der Gas-Chromatographie verschiedener Carbamate und Thiocarbamate. In vielen F?llen entsprechen die beobachteten resultierenden thermischen Abbauprodukte in gewissem Ma?e den drei m?glichen Abbauformen, über die in nichtchromatographischen thermischen Untersuchungen von N-Phenylcarbamaten berichtet wird [4, 35, 36], z.B. Dyer Wright [35] haben gezeigt, da?, wenn R eine prim?re oder sekund?re Alkylgruppe ist, alle drei Abbauformen vorkommen k?nnen, wenn die Reaktion in Abwesenheit von L?sungsmitteln stattfindet. Wenn die Amin- und Isocyanat-Produkte in der Mischung belassen werden, bildet sich auch Diphenylharnstoff, n?mlich: Wie gezeigt wurde, besitzt die thermische und hydrolytische Stabilit?t von Carbamaten eine starke Abh?ngigkeit von Grad und Art der N-Substitution. Disubstituierte Carbamate sind ziemlich resistent gegen therm?sche Zersetzung (wie auch gegen Hydrolyse). Monosubstitutierte Carbamate lassen sich bei h?heren Temperaturen leicht thermisch zersetzen, wobei haupts?chlich das entsprechende Isocyanat entsteht, w?hrend sich unsubstituierte Carbamate nach [37] in Allophanate, Cyanurs?ure und Alkohol zersetzen. Der thermische Abbau unsubstituierter Carbamate wird durch Anwesenheit selbst geringer Spuren von Metallsalzen nennenswert beschleunigt, wobei Cyamelid entsteht. Das Abbauschema für die Diol-Dicarbamate (typische Beispiele: medizinische Carbamate, Meprobamat und Soma) ist schwieriger zu interpretieren.Paquin [38] berichtet, da? bei der Pyrolyse des Dicarbamats von 1,3-Butylenglycol (I) ein Oxazolidon (II) und ein cyclischer Harnstoff (III) in der folgenden Weise entstanden: Der weitere Abbau der Verbindungen II und III unter Pyrolysebedingungen ist nicht auszuschlie?en.

---

Transformations de structure pendant la chromatographie en phase gazeuse de carbamates

Sommaire On ne manque pas d'exemples qui illustrent les transformations de structure observées pendant la chromatographie en phase gazeuse de divers carbamates et thiocarbamates. Souvent les produits de dégradation thermiques obtenus sont analogues, dans une certaine mesure, a ceux formés par décomposition thermique selon un des schémas probable signalé ci-après, procédés qui furent decrits pour des carbamates N-phényliques [4, 35, 36] dans des études de stabilité thermique non-chromatographiques, par exemple: Dyer etWright [35] ont démontré, si R est un groupe alkyle primaire ou secondaire, les trois modes de décomposition peuvent avoir lieu si la réaction se produit en l'absence de solvants. Si les amines et les isocyanates sont laissés dans le mélange, il y a aussi formation de diphénylurée, c'est-à-dire Il a été montré que la stabilité thermique et hydrolytique de carbamates dépend fortement du degré et type de la N-substitution. Des carbamates disubstitués sont assez résistants à la décomposition thermique (ainsi qu'à l'hydrolyse). Les carbamates monosubstitutés sont facilement sujets à la décomposition thermique à des températures élevées, produisant surtout l'isocyanate correspondant, tandis que, selon la littérature, des carbamates non-substitués sont décomposés en formant des allophanates, acide cyanurique, et alcool [37]. La décomposition thermique de carbamates non-substitués est accélérée sensiblement par la présence de sels métalliques, même à l'état de trace, provoquant la formation de cyamélide. Le schéma de dégradation des diol-dicarbamates (exemples typiques: carbamates médicinaux, méprobamate, soma) est plus difficile à interpréter.Paquin [38] a trouvé que la pyrolyse du dicarbamate de 1,3-butylène glycol (I) produit un oxazolidone (II) et une urée cyclique (III) d'après le schéma suivant: La dégradation ultérieure des composés II et III sous des conditions pyrolytiques n'est pas à exclure.

     

Methyl- and methoxysalicylatocopper complexes with 2-pyridylmethanol: Synthesis,spectral properties,structure and EPR characterization in solid-state and in solution

The syntheses and characterizations of salicylatocopper(II) complexes of the formula Cu(X-sal)₂(2-pyme)₂ (X = 3-MeO (1), 4-MeO (2), 3-Me (3), 4-Me (4) and 5-Me (5), where 3-MeOsal⁻ = 3-methoxysalicylate, 4-MeOsal⁻ = 4-methoxysalicylate, 3-Mesal⁻ = 3-methylsalicylate, 4-Mesal⁻ = 4-methylsalicylate, 5-Mesal⁻ = 5-methylsalicylate anion, and 2-pyme = 2-pyridylmethanol) are reported. The composition was determined by elemental analysis, and ligand coordination modes have been determined by spectroscopic methods (IR, UV-VIS). The crystal structure determination of [Cu(3-MeOsal)₂(2-pyme)₂] (1) and [Cu(5-Mesal)₂(2-pyme)₂] (5) have confirmed conclusions originally based on spectral data. EPR measurements of frozen water/methanol solutions containing different copper(II): 2-pyme molar ratios have indicated presence of complexes with only two nitrogen donor atoms bonded to each central atom.      

Studies on thermochemical properties of ionic liquids based on transition metal

A brown and transparent ionic liquid (IL), [C₄mim][FeCl₄], was prepared by mixing anhydrous FeCl₃ with 1-butyl-3-methylimidazolium chloride ([C₄mim][Cl]), with molar ratio 1/1 under stirring in a glove box filled with dry argon. The molar enthalpies of solution, Δ_s H _m, of [C₄mim][FeCl₄], in water with various molalities were determined by a solution-reaction isoperibol calorimeter at 298.15 K. Considering the hydrolyzation of anion [FeCl₄]⁻ in dissolution process of the IL, a new method of determining the standard molar enthalpy of solution, Δ_s H _m⁰, was put forward on the bases of Pitzer solution theory of mixed electrolytes. The values of Δ_s H _m⁰ and the sum of Pitzer parameters: and were obtained, respectively. In terms of thermodynamic cycle and the lattice energy of IL calculated by Glasser’s lattice energy theory of ILs, the dissociation enthalpy of anion [FeCl₄]⁻, ΔH _dis≈5650 kJ mol⁻¹, for the reaction: [FeCl₄]⁻(g)→Fe³⁺(g)+4Cl⁻(g), was estimated. It is shown that large hydration enthalpies of ions have been compensated by large the dissociation enthalpy of [FeCl₄]⁻ anion, Δ_d H _m, in dissolution process of the IL.     

Determination of ultra-trace amounts of inorganic selenium species in natural water by ion chromatography-inductively coupled plasma-mass spectrometry coupled with nano-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> solid phase extraction

This work presents a nano-Al₂O₃ solid phase extraction technique for the determination of ultra-trace amounts of inorganic selenium species in aqueous systems using ion chromatography inductively coupled plasma-mass spectrometry (IC-ICP-MS). In this experiment, the inorganic selenium species were successfully extracted on a nano-Al₂O₃ solid phase column and then quantitative eluted with a 100 mmol L⁻¹ NaOH solution. Extraction conditions such as solvent identity, solvent concentration, solvent volume, solvent pH and salt addition were optimized. Under the optimum extraction conditions (elute solvent: 100 mmol L⁻¹ NaOH, solvent volume: 4 mL, pH: 7.0), low detection limits (Se (IV): 6 ng L⁻¹, Se (VI): 11 ng L⁻¹; RSD<5.0%) and good linear range (0.5–100 ng mL⁻¹, R² > 0.999) were obtained for all of the analytes. Good spiked recoveries over the range of 80–98% were obtained by applying the proposed method on real environmental water samples. These results indicated that this method is very sensitive and reliable when monitoring trace levels of inorganic selenium species in aqueous samples.      

Preparation of SAMS-CMC-CS bipolar membrane and its application in electro-generating FeO 4 2−

The preparation of SAMS-CMC-CS bipolar membrane grafted onto CMC by SAMS was reported. The cross-section view of SAMS-CMC-CS BM were studied by SEM. FT-IR spectrum indicated that SAMS-CMC-CS BM contained-SO ₃ ⁻ ,-COO⁻ and −N=CHR functional groups. Compared with CMC-CS BM, SAMS-CMC-CS BM appears to have better mechanical strength and chemical stability in alkali solution at [OH⁻]≥9.5 mol/L, with a swelling of 55 %. The electrochemical properties of SAMS-CMC-CS BM were also studied. SAMS-CS-CMC BM not only effectively prevented FeO ₄ ²⁻ from diffusing into the cathode chamber, but also played an important role in the supply of OH⁻ consumed during the electro-generated FeO ₄ ²⁻ process.      

Benzidine and diphenylamine radical formation on the surface of NaY-zeolite and γ-alumina with and without V2O5

Solutions of benzidine and diphenylamine in benzene produce cation radicals on the surface of zeolite, -alumina and V₂O₅ doped alumina and zeolite. The sequence of the electron acceptor site strength on the surface is as follows:     

A new zinc complex of 1-propyl-1H-benzo[d] imidazole: synthesis, characterization and electrocatalysis

The present work reports the synthesis, characterization and performance of a new zinc(II) complex of [Zn(C₃H₇-bim)₂Br₂] (bim = benzimidazole) as electrocatalyst for trichloroacetic acid and bromate reduction. Its structure was characterized by X-ray crystallography, IR spectroscopy and elemental analysis. The zinc atom adopts a distorted tetrahedral geometry by coordinating to two bromine atoms and two nitrogen atoms from two 1-propyl-1H-benzo[d]imidazole ligands. The electrochemical behavior and electrocatalysis of the zinc complex bulk-modified carbon paste electrode (Zn-CPE) have been studied by cyclic voltammetry. The Zn-CPE shows good electrocatalytic activities toward the reduction of trichloroacetic acid and bromate. The detection limit and the sensitivity are 0.05 μM, 67.43 μA μM⁻¹ for trichloroacetic acid detection, and 0.02 μM, 69.94 μA μM⁻¹ for bromate detection, respectively. This modified electrode shows good reproducibility, high stability, low detection limit, technical simplicity and possibility of rapid preparation, which is important for practical applications.      

Fourier Transform and Multi Dimensional EPR Spectroscopy for the Characterization of Sol-Gel Derived Hydroxyapatite

Calcium hydroxyapatite powder was prepared by sol-gel method using calcium acetate and PO(OC₂H₅)₃ as initial compounds, and alcohol (methyl, ethyl, and propyl-alcohol) as solvent. Homogeneous solution and gels were prepared using a molar ratio of Ca/P=1.67. The evolution of the structure was detected by X-ray diffraction, IR, and FT-n(=1,2,3)D-EPR spectroscopy. The dried gels exhibit a signal characterized by a central line and two satellites. The 2D spectrum (ESEEM vs. field sweep) showed the same modulation for the central line. The FT-EPR spectrum vs. field sweep 2D-spectrum indicated that the satellites are due to an hfs splitting with water. The central region of this 2D spectrum is influenced by P and H in a concentration ratio of [H]/[P]=2.5. The ESEEM spectrum was simulated assuming the equation V_mod=V_mod(P)^mV_mod(H)ⁿ for two spin systems S=1/2 and I=1/2. This simulation gave form andn the values of 2 and 5, respectively. This finding suggests the structure: for the unpaired state. It appears that one ethyl group does not hydrolyse in the gelation process. The ESEEM spectra of hydroxyapatite exhibit a modulation generated by P, H and Ca atoms.     

Determination of cobalt in water samples by atomic absorption spectrometry after pre-concentration with a simple ionic liquid-based dispersive liquid-liquid micro-extraction methodology

A rapid dispersive liquid-liquid micro-extraction (DLLME) methodology based on the application of 1-hexylpyridinium hexafluorophosphate [C₆py][PF₆] ionic liquid (IL) as an extractant solvent was applied for the pre-concentration of trace levels of cobalt prior to determination by flame atomic absorption spectrometry (FAAS). 1-Phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) was employed as a chelator forming a Co-PMBP complex to extract cobalt ions from aqueous solution into the fine droplets of [C₆py][PF₆]. Some effective factors that influence the micro-extraction efficiency include the pH, the PMBP concentration, the amount of ionic liquid, the ionic strength, the temperature and the centrifugation time which were investigated and optimized. In the optimum experimental conditions, the limit of detection (3s) and the enrichment factor were 0.70 μg L⁻¹ and 60, respectively. The relative standard deviation (RSD) for six replicate determinations of 50 μg L⁻¹ Co was 2.36%. The calibration graph using the pre-concentration system was linear at levels 2–166 μg L⁻¹ with a correlation coefficient of 0.9982. The applicability of the proposed method was evaluated by the determination of trace amounts of cobalt in several water samples.      

Synthesis of New Hybrid Organic-Inorganic Alumina Gels by the Sol-Gel Method

New hybrid organic-inorganic alumina gels have been prepared by reacting aluminum sec-butoxide and propane-1,2-diol, in CCl₄ as solvent. This reaction occurred without water addition and without the use of any catalyst, leading to the formation of transparent and monolithic gels. IR,²⁷Al and¹³CNMR show that an interchange reaction between OBu ^s alkoxide groups and diol groups occurred, leading to the hybrid gels. Samples heat treated at different temperatures under argon are weakly porous and have a small specific surface area. XRD indicates the presence of pure α-alumina at 1450°C.     

Extraction-spectrophotometric investigations on two ternary ion-association complexes of gallium(III)

Complex formation and liquid-liquid extraction were studied in systems containing Ga(III), azoderivative of resorcinol {4-(2-pyridylazo)resorcinol (PAR) or 4-(2-thiazolylazo)resorcinol (TAR)}, 2,3,5-triphenyltetrazolium chloride (TTC), water and chloroform. The optimum conditions w.r.t. pH, extraction time, concentration of ADR and concentration of TTC for the extraction of Ga(III) as an ion-associate complex were found.. The composition of the extracted complexes, (TT⁺)[Ga(PAR)₂] (I), (TT⁺)[Ga(TAR)₂] (II) or (TT⁺)₂[Ga(OH)(TAR)₂] (III), and the constants of association (β) between 2,3,5-triphenyltetrazolium cation (TT⁺) with corresponding anionic chelates were established by several methods. The constants of distribution (K_D) and extraction (K_ex) of the principal species I and III were determined as well. The apparent molar absorptivities of the chloroform extract at the optimum extraction-spectrophotometric conditions were ɛ′₅₁₀=9.5×10⁴ L mol⁻¹ cm⁻¹ (I) and ɛ′₅₃₀=4.6×10⁴ L mol⁻¹ cm⁻¹ (III). The validity of Beer’s law was checked and analytical characteristics that were calculated are reported herein.      

Kinetic study of reaction of [ReN(H2O)(CN)4]2− with quinoline-2-carboxylate and pyridine-2,3-dicarboxylate anions

The kinetics of the reaction between [ReN(H₂O)-(CN)₄]²⁻ with different κ² N,O-donor ligands (quin⁻ and 2,3-dipic⁻, respectively) have been studied in the pH 4–12 range in aqueous solution. Two consecutive reaction steps with the formation of the [ReN(η¹-quin)(CN)₄]³⁻ and [ReN(μ²-quin) (CN)₃]²⁻ complexes, respectively, were spectrophotometrically observed and kinetically investigated. The same reaction mechanism is proposed for these two ligands. The first fast reaction (for quin⁻) is attributed to the aqua substitution of [ReN(H₂O)(CN)₄]²⁻ with forward and reverse rate constants of 1.96(5) × 10⁻¹ M⁻¹ s⁻¹ and 5.6(3) × 10⁻² s⁻¹, while a rate of 2.64(3) M⁻¹ s⁻¹ was observed for the reaction between the conjugate base [ReN(OH)(CN)₄]³⁻ and quin⁻ at 40.2 °C. Due to small absorbance changes, it was difficult to obtain any good quality data for the fast reactions for 2,3-dipic⁻. The second, slower reaction is attributed to cyano substitution with rate constants (k ₃ K ₁) of 4.17(4) × 10⁻³ for quin⁻ and 4.68(7) × 10⁻³ M⁻¹ s⁻¹ for 2,3-dipic⁻, at 80.02 °C, respectively. The acid dissociation constant for the aqua complex was spectrophotometrically determined as 11.58(3) and 11.54(2) and kinetically as 11.51(8) and 11.41(1), at 80.4 °C, respectively. Negative values of −83.5(2) and −144.1(2) J K⁻¹ mol⁻¹ as well as the of 71.4(3) and 47.3(3) kJ mol⁻¹, for the slow quin⁻ and 2,3-dipic⁻ reactions, respectively, point to an ordered transition state where bond formation is responsible for the major driving force of the reaction. The and for the fast forward reaction of quin⁻ is indicative of expected associative activation in the transition state. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.