Hybrid polymer-immobilized palladium nanoparticles: Preparation and catalytic properties

A new approach to the synthesis of mixed-type immobilized catalysts was developed: the frontal polymerization of a metal-containing monomer in the presence of a highly dispersed mineral support. The synthesis of an acrylamide complex of Pd(II) nitrate on the surface of SiO₂, Al₂O₃, or C and its subsequent polymerization and reduction resulted in the formation of an organic-inorganic composite that included nanosized Pd particles stabilized by a polymer matrix and an inorganic support. The resulting hybrid nanocomposites are efficient and selective catalysts for the hydrogenation reactions of cyclohexene and alkene and acetylene alcohols.     

One Step Preparation of Reduced Graphene Oxide/Pd–Fe3O4@Polypyrrole Composites and Their Application in Catalysis

The simple preparation of catalysts with superior catalytic activity and good reusability is highly desirable. Herein, we report a novel strategy to construct reduced graphene oxide (rGO)/Pd–Fe₃O₄@polypyrrole (PPy) catalysts with Pd and Fe₃O₄ nanoparticles anchored on a rGO nanosheet surface and wrapped in a PPy shell. The synthesis and assembly of both the Pd and Fe₃O₄ nanoparticles, the preparation of the PPy layer, and the reduction of graphene oxide nanosheets were finished in one step. In the system, the PPy layer not only prevented aggregation of Pd and Fe₃O₄ nanoparticles, but also generated a synergistic effect with precursor Pd²⁺ ions, which led to a high dispersity of as‐prepared Pd nanoparticles. Although the procedure was simplified to one step, the catalytic activity and reusability were not sacrificed. In the reduction of 4‐nitrophenol, their catalytic performance was better than that in recent reports. Moreover, the catalysts showed good reusability owing to their magnetic properties.     

One‐Pot Synthesis of Carbon‐Supported Dendritic Pd‐Au Nanoalloys for Electrocatalytic Ethanol Oxidation

One‐pot synthesis of carbon‐supported Pd‐Au alloy nanoparticles with well‐defined dendritic shape (Pd‐Au_den/C) was achieved by co‐reduction of K₂PdCl₄/HAuCl₄ mixtures in a molar ratio of 1:1 with hydrazine in the presence of Vulcan XC‐72R. The prepared Pd‐Au_den/C exhibited significantly enhanced performance in the electrocatalytic oxidation of ethanol compared with dendritic Pd nanoparticles and a commercial Pd/C catalyst. Pd‐Au_den/C even showed higher durability in electro‐oxidation of ethanol than the supported catalyst prepared by the deposition of presynthesized dendritic Pd‐Au nanoparticles on the carbon support. The experimental results clearly indicate that enhanced interaction between nanoparticle catalysts and carbon support through the one‐pot synthesis protocol can improve the durability of the electrocatalysts.     

碳纳米管上原位沉积钯-钴-镍纳米颗粒及其对乙醇氧化的电活性

以水合肼为还原剂,在水和乙醇的混合溶液中制备多壁碳纳米管(MWCNT)负载的纳米镍(Ni/MWCNT)和纳米镍钴(Ni-Co/MWCNT)颗粒,然后将它们分别与氯化钯溶液反应,形成的钯纳米颗粒原位沉积在MWCNT表面,从而得到MWCNT负载的Pd-Ni/MWCNT和Pd-Ni-Co/MWCNT催化剂。SEM和TEM图像显示,MWCNT上的催化剂颗粒是由5~10 nm的小颗粒团聚而成的30~100 nm的大颗粒,三金属催化剂的粒径比双金属的粒径小,在MWCNT上的分散度更高。ICP和EDS分析显示,Pd直接还原并包覆在纳米镍和纳米镍钴表面;采用循环伏安和计时电流技术,研究了催化剂在碱性溶液中对乙醇氧化的电催化活性,结果表明,Pd-Ni-Co/MWCNT催化剂对乙醇氧化具有强的电催化活性,乙醇氧化对应的峰电流密度达101.8 mA·cm^-2,并且催化剂催化活性稳定。     

Graphene-supported small-sized palladium nanoparticles made by facile photochemical approaches

To achieve small-sized and well-dispersed palladium (Pd) nanoparticles, we make use of effective photochemical approaches to synthesis of clean Pd nanoparticles on the surface of graphene at room temperature. By modulating the photochemical reaction conditions, the size and dispersion of graphene–Pd composites can be well controlled, where PdCl₄²⁻ and graphene oxide (GO) are the reaction precursors, Hantzsch 1,4-dihydropyridine (HEH) is used as an electron donor and an amine-type ligand to stabilize small Pd nanoparticles on the surface of graphene. As a result, the easy and effective photochemical approaches to the graphene–Pd composites with well-dispersed, small-sized Pd nanoparticles and highly conductive reduced GO, are established. Good to excellent yields have also been achieved with the graphene-supported Pd nanoparticles catalysts for the Suzuki coupling reaction.     

Highly Selective Pd–Cu/α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts for Liquid-Phase Hydrogenation: The Influence of the Pd: Cu Ratio on the Structure and Catalytic Characteristics

The structure and catalytic characteristics of a series of Pd–Cu/α-Al₂O₃ catalysts with Pd: Cu ratio varied from Pd₁–Cu_0.5 to Pd₁–Cu₄ were studied. The use of α-Al₂O₃ with a small surface area (S_sp = 8 m²/g) as a support made it possible to minimize the effect of diffusion on the catalytic characteristics and to study the structure of Pd–Cu nanoparticles by X-ray diffraction (XRD) analysis. The XRD analysis and transmission electron microscopy (TEM) data indicated the formation of uniform bimetallic Pd–Cu nanoparticles (d = 20–60 nm), whose composition corresponded to a ratio between the metals in the catalyst, and also the absence of monometallic Pd⁰ and Cu⁰ nanoparticles. The study of catalytic properties in the liquid-phase hydrogenation of diphenylacetylene (DPA) showed that the activity of the catalysts rapidly decreased with the Cu content increase; however, in this case, the yield of a desired alkene compound significantly increased. The selectivity of alkene formation on the catalysts with the ratios Pd: Cu = 1: 3 and 1: 4 was superior to the commercial Lindlar catalyst.     

Influence of the thermal treatment conditions and composition of bimetallic catalysts Fe—Pd/SiO2 on the catalytic properties in phenylacetylene hydrogenation

The supported bimetallic Fe—Pd/SiO₂ catalysts with the different Fe (0.025—8 mass.%) and Pd (0.05—3.2 mass.%) loadings were synthesized by the incipient wetness impregnation of support. The samples were heat-treated under different conditions (calcination in air at 240—350 °C or reduction in an H₂ flow at 400 °C). The X-ray phase analysis revealed the formation of Pd⁰, α-Fe₂O₃ and Fe₃O₄ phases after calcination of the samples at 240—260 °C. The reduction of the calcined Fe—Pd samples in an H₂ flow at 400 °C enables the formation of Fe⁰ nanoparticles of size 17—20 nm. The synthesized catalytic systems were studied in the selective hydrogenation of phenylacetylene at room temperature and atmospheric pressure in a solvent (ethanol, propanol). The catalytic properties of the Fe—Pd catalysts depend on the nature of solvent, catalyst composition, and thermal treatment conditions. The application of the Fe—Pd bimetallic catalysts with a low Pd loading of 0.05—0.1 mass.% made it possible to reach the high activity and selectivity to styrene (91%) at the complete conversion of phenylacetylene.     

Development of Palladium Surface‐Enriched Heteronuclear Au–Pd Nanoparticle Dehalogenation Catalysts in an Ionic Liquid

Heteronuclear Au–Pd nanoparticles were prepared and immobilized in the functionalized ionic liquid [C₂OHmim][NTf₂]. The structural and electronic properties of the nanoparticles were characterized by a range of techniques and the surface of the nanoparticles was found to be enriched in Pd. Moreover, the extent of Pd enrichment is easily controlled by varying the ratio of Au and Pd salts used in the synthesis. The heteronuclear nanoparticles were found to be effective catalysts in dehalogenation reactions with no activity observed for the pure Au nanoparticles and only limited activity for the pure Pd nanoparticles. The activity of the heteronuclear nanoparticles may be attributed to charge transfer from Pd to Au and consequently to more efficient reductive elimination.     

Dehydrogenation of cyclohexane over supported Pd catalysts, II. Influence of the support and reduction temperature

We have studied the activity of Pd/sepiolite and Pd/SiO₂–AlPO₄ catalysts in cyclohexane aromatization. The catalysts were characterized by H₂ chemisorption measurements. The influence of support and reduction temperature on the metal surface properties and activity of the catalysts is discussed.     

碳纳米管上原位沉积钯-钴-镍纳米颗粒及其对乙醇氧化的电活性

以水合肼为还原剂,在水和乙醇的混合溶液中制备多壁碳纳米管(MWCNT)负载的纳米镍(Ni/MWCNT)和纳米镍钴(Ni-Co/MWCNT)颗粒,然后将它们分别与氯化钯溶液反应,形成的钯纳米颗粒原位沉积在MWCNT表面,从而得到MWCNT负载的PdNi/MWCNT和Pd-Ni-Co/MWCNT催化剂。SEM和TEM图像显示,MWCNT上的催化剂颗粒是由5~10 nm的小颗粒团聚而成的30~100 nm的大颗粒,三金属催化剂的粒径比双金属的粒径小,在MWCNT上的分散度更高。ICP和EDS分析显示,Pd直接还原并包覆在纳米镍和纳米镍钴表面;采用循环伏安和计时电流技术,研究了催化剂在碱性溶液中对乙醇氧化的电催化活性,结果表明,Pd-Ni-Co/MWCNT催化剂对乙醇氧化具有强的电催化活性,乙醇氧化对应的峰电流密度达101.8 m A·cm~(-2),并且催化剂催化活性稳定。     

Preparation of microporous polymer-encapsulated Pd nanoparticles and their catalytic performance for hydrogenation and oxidation

Palladium nanoparticles (Pd NPs) encapsulated by conjugated microporous polymers (CMPs) were prepared by the Pd-catalyzed polymerization followed by a thermal treatment with N₂ or H₂. The Pd catalysts were embedded in the porous network during polymerization and used as a precursor for the generation of Pd NPs in CMP. Although no Pd NPs were formed in the as-synthesized Pd/CMPs, Pd NPs with 1.6–3.5 nm size were formed after the thermal treatment. The obtained Pd/CMP-N₂ and -H₂ catalysts were highly selective in the hydrogenation of 4-nitrostyrene to 4-ethylnitrobenzene, whereas Pd NPs supported on carbon (Ketjen black) gave a fully reduced product, 4-ethylaniline. Substituents in CMP framework could change the catalytic activity of Pd NPs; hydroxy-substituted CMP encapsulated Pd NPs showed higher catalytic activity than Pd/CMP-H₂ for benzyl alcohol oxidation.     

A facile preparation of carbon-supported Pd nanoparticles for electrocatalytic oxidation of formic acid

A low temperature approach via the complexing of PdCl₂ with EDTA followed by NaBH₄ reduction has been used to prepare Vulcan XC-72 carbon-supported Pd nanoparticles (Pd/C). The mean particle size of the Pd/C catalysts is found to increase from 3.3 to 9.2 nm with heat-treated temperature. TEM images demonstrated that the Pd nanoparticles are well dispersed on the support with a relatively narrow particle size distribution. A correlation between the electrocatalytic activity of formic acid oxidation and particle size of the Pd/C catalysts indicates that the highest activity of formic acid oxidation is found with a Pd mean particle size of ca. 4.7 nm. The preparation method used here is cost-effective and should be easily scaled for industrial production.     

Influence of the preparation conditions of Pd‐ZrO2 and AuPd‐ZrO2 nanoparticle–decorated functionalised MWCNTs: Electron spectroscopy study aided with the QUASES

The Pd, AuPd, and ZrO₂ nanoparticle–decorated functionalised multiwalled carbon nanotubes (f‐MWCNTs) were reported as efficient catalysts of formic acid (FA) electro‐oxidation. Different preparation conditions influence their chemical and structural properties analysed by X‐ray photoelectron spectroscopy aided with the quantitative analysis of surfaces by electron spectroscopy. Different reduction procedures such as NaBH₄, a polyol microwave‐assisted method (PMWA), and a high pressure microwave reactor (HPMWR) were applied for decorating ZrO₂/f‐MWCNTs with Pd and AuPd nanoparticles. The ZrO₂ nanoparticles are attached through oxygen groups to the surface of f‐MWCNTs. In NaBH₄ and HPMWR procedures, Pd nanoparticles precipitate predominantly on ZrO₂ of nearly nominal stoichiometry, whereas in PMWA procedure, Pd and AuPd nanoparticles precipitate predominantly on the surface of f‐MWCNTs, bridging with oxygen groups and ZrO_x (x < 2) and leading to Pd‐O‐Zr phase formation. Strong reducing procedures (NaBH₄ and FA) led to smaller Pd nanoparticle size, Pd oxide content, and PdO_x overlayer thickness in contrary to weak reduction procedures (HPMWR and PMWA). The highest content of Pd‐O‐Zr phase appeared for Pd predominant precipitation on ZrO₂ nanoparticles (HPMWR) in contrary to Pd and AuPd predominant precipitation on surface of f‐MWCNTs (NaBH₄ ~ FA > PMWA). Larger content of Pd‐O‐Zr phase in AuPd‐decorated ZrO₂/f‐MWCNTs in contrary to Pd‐decorated sample (PMWA) could be justified by different electronic properties of nanoparticles. The FA treatment of Pd and AuPd‐ZrO₂/f‐MWCNTs samples provided decreasing Pd oxide content, overlayer thickness, nanoparticle size, increasing nanoparticle surface coverage and density, amount of Pd‐O‐Zr, what results from reduction of oxygen groups bridging with Pd and ZrO_x nanoparticles, also through Pd‐O‐Zr phase.     

Remediation of azo-dyes based toxicity by agro-waste cotton boll peels mediated palladium nanoparticles

The present study reports an environmental benign route for the synthesis of palladium nanoparticles (Pd NPs) using agro-waste empty cotton boll peels aqueous extract for the first time. Surface Plasmon Resonance (SPR) band in absorption spectrum of Pd NPs at 275 nm confirmed the formation of Pd NPs by using UV–Vis spectroscopy. Crystalline nature of Pd NPs was confirmed by powder XRD analysis. Size and morphology was studied by transmission electron microscopy (TEM). The cotton peels extract acted as a source of phytochemicals which primarily reduced Pd⁺² to Pd⁰ nanoparticles (Pd NPs) and imparted stability of Pd NPs by surface capping. The characteristic functional groups of phytochemicals in extract and capped Pd NPs surfaces were identified by FT-IR analysis. Catalytic activity of the synthesised Pd NPs was checked against reduction of hazardous azo-dyes such as Congo red, Methyl orange, Sunset yellow and Tartrazine with NaBH₄ as electron donors. Pd NPs catalysed reduction of all azo-dyes by NaBH₄ in aqueous medium was monitored by UV–visible spectroscopy where Pd NPs mediated transfer of electrons from NaBH₄ to azo-dyes as carrier. The synthesized Pd NPs acted as a good catalyst and could be a promising material in degrading toxic azo-dyes from industrial effluents and wastewater.     

Low temperature carbon monoxide catalytic oxidation at the Pd/Ce–Zr–Al–Ox catalyst

The homogeneous chemical composition ceria–zirconia–alumina (Ce–Zr–Al–O_x) nano-alloy were successfully synthesized by surfactant-assisted parallel flow co-precipitation method and applied as supports for low temperature CO oxidation. The experiment conditions were studied in detailed. At 0.92 wt% Pd loading, 30,000 ppm CO could be completely oxidized to CO₂ at 30 °C at a WHSV of 4,380 ml g^?1 h^?1 over the Pd/Ce–Zr–Al–O_x (n_Ce:n_Zr = 3:1) catalyst. Pd/Ce–Zr–Al–O_x catalysts were systematical studied by mean of BET, XRD and TEM analysis. XRD characterization showed that zirconium element entered into cubic structure of ceria and leaded to structure distortion. Addition of aluminum increased specific surface area of ceria–zirconia solid solution substantially. The average pore diameter of Ce–Zr–Al–O_x support palladium catalysts were the key impact factor for CO oxidation. When the Pd/Ce–Zr–Al–O_x catalysts had highly dispersed palladium nanoparticles, large average pore diameter, suitable surface area and pore volume, the activity of CO oxidation was the best.     

A General and High‐Yield Galvanic Displacement Approach to Au?M (M=Au,Pd, and Pt) Core–Shell Nanostructures with Porous Shells and Enhanced Electrocatalytic Performances

In this work, we utilize the galvanic displacement synthesis and make it a general and efficient method for the preparation of Au? M (M=Au, Pd, and Pt) core–shell nanostructures with porous shells, which consist of multilayer nanoparticles. The method is generally applicable to the preparation of Au? Au, Au? Pd, and Au? Pt core–shell nanostructures with typical porous shells. Moreover, the Au? Au isomeric core–shell nanostructure is reported for the first time. The lower oxidation states of Au^I, Pd^II, and Pt^II are supposed to contribute to the formation of porous core–shell nanostructures instead of yolk‐shell nanostructures. The electrocatalytic ethanol oxidation and oxygen reduction reaction (ORR) performance of porous Au? Pd core–shell nanostructures are assessed as a typical example for the investigation of the advantages of the obtained core–shell nanostructures. As expected, the Au? Pd core–shell nanostructure indeed exhibits a significantly reduced overpotential (the peak potential is shifted in the positive direction by 44 mV and 32 mV), a much improved CO tolerance (I_f/I_b is 3.6 and 1.63 times higher), and an enhanced catalytic stability in comparison with Pd nanoparticles and Pt/C catalysts. Thus, porous Au? M (M=Au, Pd, and Pt) core–shell nanostructures may provide many opportunities in the fields of organic catalysis, direct alcohol fuel cells, surface‐enhanced Raman scattering, and so forth.     

Catalytic Hydrodechlorination of 1,2,4,5‐Tetrachlorobenzene over Various Supports Loaded Palladium Catalysts

Water pollution by polychlorinated aromatic hydrocarbons has always been a global issue. In this work, we reported a synthesis of supported palladium catalysts Pd/C, Pd/CeO₂, Pd/SBA‐15, Pd/ZrO₂,Pd/SiO₂, and Pd/Al₂O₃ as well as their catalytic activities on hydrodechlorination (HDC) of 1,2,4,5‐tetrachlorobenzene (TeCB). These Pd catalysts were characterized by Brunauer‐Emmett‐Teller (BET) specific surface area, Transmission electron microscopy (TEM), X‐ray diffraction (XRD), energy Dispersive X‐ray Fluorescence (EDXRF), CO‐chemisorption, and H2‐temperature programmed reduction (H2‐TPR) analysis. Pd/C, Pd/CeO₂ and Pd/SBA‐15 catalysts showed relatively high catalytic activities. The catalytic activities were associated with dispersion of Pd, metal surface area, and reaction temperature, etc.     

Supported Pd–Cu Bimetallic Nanoparticles That Have High Activity for the Electrochemical Oxidation of Methanol

Monodisperse bimetallic Pd–Cu nanoparticles with controllable size and composition were synthesized by a one‐step multiphase ethylene glycol (EG) method. Adjusting the stoichiometric ratio of the Pd and Cu precursors afforded nanoparticles with different compositions, such as Pd₈₅–Cu₁₅, Pd₅₆–Cu₄₄, and Pd₃₉–Cu₆₁. The nanoparticles were separated from the solution mixture by extraction with non‐polar solvents, such as n‐hexane. Monodisperse bimetallic Pd–Cu nanoparticles with narrow size‐distribution were obtained without the need for a size‐selection process. Capping ligands that were bound to the surface of the particles were removed through heat treatment when the as‐prepared nanoparticles were loaded onto a Vulcan XC‐72 carbon support. Supported bimetallic Pd–Cu nanoparticles showed enhanced electrocatalytic activity towards methanol oxidation compared with supported Pd nanoparticles that were fabricated according to the same EG method. For a bimetallic Pd–Cu catalyst that contained 15 % Cu, the activity was even comparable to the state‐of‐the‐art commercially available Pt/C catalysts. A STEM‐HAADF study indicated that the formation of random solid‐solution alloy structures in the bimetallic Pd₈₅–Cu₁₅/C catalysts played a key role in improving the electrochemical activity.     

Knitting N‐doped Hierarchical Porous Polymers to Stabilize Ultra‐small Pd Nanoparticles for Solvent‐Free Catalysis

Hierarchical porous polymers with more than one pore size distributions can effectively support noble metal catalysts and circumvent the limitation of the diffusion of the reactants, and thus exhibit both excellent catalytic activity and superior diffusive properties. Herein, we report a simple one‐step Friedel–Crafts reaction to knit a series of benzene heterocycle monomers, such as indane, indoline, indole and tetrahydronaphthalene to obtain hierarchical porous polymers with high surface areas and/or abundant N sites. These polymers can be directly used to immobilize Pd ions, and stabilize Pd nanoparticles during the thermal reduction process to obtain Pd/polymer catalysts. In particular, indoline‐ and indole‐based polymers with high N content up to 7 wt % exhibit outstanding ability to stabilize uniform ultrasmall Pd nanoparticles. The obtained Pd‐polymers exhibit excellent catalytic activity in the solvent‐free oxidation of benzyl alcohol with O₂.     

Low-Temperature Fast Production of Carbon and Acetic Acid Dual-Promoted Pd/C Catalysts

The Pd/C catalysts are widely used in synthesis of fine chemicals in industry, but their production suffers from a complicated two-step process involving impregnation and reduction, and requires large amounts of solvents and reductant, which would lead to a series of issues such as time consumption, resource waste and environmental pollution. Herein, ultra-small Pd nanoparticles uniformly anchored on carbon nanotubes (Pd/CNTs) were synthesized by using a one-pot and low-temperature reduction strategy. The present process/technology is very sensitive to and controlled by the supports and solvents, and the carbon support and acetic acid synergistically play crucial and decisive roles in the fast production of Pd/C catalysts. Also, the used solvents can be recycled and reutilized, which meets the requirements of sustainable chemistry and green economy. When the as-obtained Pd/CNTs catalyst was used to catalyze the oxidation of benzyl alcohol to benzaldehyde, it achieved a conversion efficiency as high as 99.3 % and a high selectivity up to >99.9 %. The simple, scalable and environmentally friendly strategy can be extended to anchor Pd nanoparticles on various carbon substrates, which sheds a new light on the synthesis of Pd/C catalysts.