Density functional theory calculation of platinum surface segregation energy in Pt3Ni (111) surface doped with a third transition metal

We have used density functional theory method to calculate the Pt surface segregation energy in the Pt₃Ni (111) surface doped with a third transition metal M and thus investigated the influence of component M on the extent of Pt segregation to the outermost layer of these Pt₃Ni/M (111) surface. As a third component in the Pt₃Ni/M (111) surface, V, Fe, Co, Mo, Tc, Ru, W, Re, Os, and Ir were predicted to lead to even more negative Pt surface segregation energies than that in the based Pt₃Ni (111) surface; Ti, Cr, Mn, Cu, Zr, Nb, Rh, Hf, and Ta would still retain the preference of Pt segregation to the surface but with less extent than the replaced Ni, while Pd, Ag, and Au would completely suppress the Pt segregation to the Pt₃Ni/M (111) surfaces. Furthermore, we examined the relation between the Pt surface segregation energy in the Pt₃Ni/M (111) surfaces and the material properties (lattice parameter, heat of solution, and Pt surface segregation energy) of binary alloys Pt₃M. It was found that the surface energy effect, strain effect, and heat of solution effect induced by the doped element M would collectively affect the Pt surface segregation energy in the Pt₃Ni/M (111) surfaces.     

Influence of the substrate structure on the bonding of chemisorbed acetylene to transition metal surfaces

The electronic spectrum of acetylene adsorbed on various transition metals has been measured by ultraviolet photoemission spectroscopy in various laboratories. At low temperatures (T < 150 K), all measurements concur in finding an electron spectrum that differs only moderately from the gas phase spectrum of acetylene. At room temperature, the electron spectrum of acetylene is reported to be similar to the low-temperature form on Ir(100) and Pt(100), but acetylene is reported to form an olefinic surface complex on Pd(111) and Pt(111) surfaces. In order to examine whether the surface structure of the substrate is responsible for the difference, we have measured the electronic spectrum of acetylene adsorbed on the Pd(100) and Ru(0001) surfaces. At 120 K, the spectrum of adsorbed acetylene is again a distorted gas phase spectrum on both surfaces. At 330 K, we find the acetylenic form (with a splitting of 2.5 eV of the σ-orbitals) on Pd(100) and an olefinic form on the basal plane of Ru. We conclude that the olefinic complex is proper to the threefold symmetry of the (111) and (0001) surfaces and the gas-like form is favored on the (100) surfaces of the fcc crystals.     

Liénard-type chemical oscillator

Using first-principles calculation, we have studied the properties of a series of M _x Co_1?x /Co(0001) (M = Pd, Pt) bimetallic surface alloys with atom M ratios from 0.25 to 1.0, then the effect of alloyed M metal on the properties of S adsorbed on these surfaces are discussed. Our calculations show that the alloying of metal Pd, Pt on Co(0001) weakens the S-M (M = Pd, Pt, Co) bond strength compared to monometallic surfaces and the site preference of sulfur atom is dependent on the alloyed metal M and its surface concentration. Moreover, bimetallic surface electronic structure modifications with and without sulfur are analyzed in comparison with clean Co(0001), and the correlation between the sulfur adsorption energy and the bimetallic surface d-band center is presented.     

Properties of the Ce–Pd–Pt(111) overlayer system

The Pd–Pt(111) and the Ce–Pd–Pt(111) overlayer systems were studied by X-ray photoelectron spectroscopy and low-energy electron diffraction (LEED). Variations in the work function were measured by ultraviolet photoelectron spectroscopy. The Pd overlayer thicknesses were in the range of 1 to 4 monolayers (MLs). The Ce overlayer thicknesses were in the range is of 0.5 to 1.5 MLs. The interfaces were studied for annealing temperatures up to 700°C. Surface alloying or intermixing of Ce, Pd and Pt was observed. Upon deposition at ambient temperatures, Ce forms an overlayer. During annealing, both Pd and Ce were found to dissolve into the Pt substrate. For a Pd coverage of about 1 ML, the Ce–Pd–Pt(111) system was found to be Pt, terminated after annealing to 700°C. For Pd coverage above 1 ML, both Pd and Pt were found to be present at the surface. Cerium was found to be absent from the top surface layer in both cases.     

Strain induced epitaxial relationships of Cr on Co/Pd(111)

The growth and structure of Co ultra-thin films on Pd(111) and Cr on Co/Pd(111) have been analyzed by grazing incidence X-ray diffraction and low energy electron diffraction. It is shown that the in-plane lattice constant of the epitaxial Co film depends on the growth temperature. Although the strain decreases as a function of the Co film thickness, it persists for 20 monolayer (ML) films or even thicker. When Cr is deposited at room temperature on a strained Co film (10 to 20 ML thick) a Kurdjumov–Sachs epitaxial relationship is observed, whereas when Cr is deposited on a Co(0001) single-crystal or on a very thick Co film on Pd(111), a Nishyama–Wassermann orientation is obtained.     

Charging of metal adatoms on ultrathin oxide films: Au and Pd on FeO/Pt(111)

We present a combined experimental (STM/scanning tunneling spectroscopy) and theoretical (density functional theory) study on the deposition of Au and Pd metal atoms on FeO/Pt(111) ultrathin films. We show that while the Pd atoms are only slightly oxidized, the Au atoms form positive ions upon deposition, at variance to a charge transfer into the Au atoms as observed for MgO/Ag(100). The modulation of the adsorption properties within the surface Moiré cell and the charging induce the formation a self-assembled array of gold adatoms on FeO/Pt(111), whereas Pd atoms are randomly distributed.     

Deposition of metal clusters on single-layer graphene/Ru(0001): Factors that govern cluster growth

Fabrication of nanoclusters on a substrate is of great interest in studies of model catalysts. The key factors that govern the growth and distribution of metal on graphene have been studied by scanning tunneling microscopy (STM) based on different behaviors of five transition metals, namely Pt, Rh, Pd, Co, and Au supported on the template of a graphene moiré pattern formed on Ru(0001). Our experimental findings show that Pt and Rh form finely dispersed small clusters located at fcc sites on graphene while Pd and Co form large clusters at similar coverages. These results, coupled with previous findings that Ir forms the best finely dispersed clusters, suggest that both metal–carbon (M–C) bond strength and metal cohesive energies play significant roles in the cluster formation process and that the M–C bond strength is the most important factor that affects the morphology of clusters at the initial stages of growth. Furthermore, experimental results show Au behaves differently and forms a single-layer film on graphene, indicating other factors such as the effect of substrate metals and lattice match should also be considered. In addition, the effect of annealing Rh on graphene has been studied and its high thermal stability is rationalized in terms of a strong interaction between Rh and graphene as well as sintering via Ostwald ripening.     

Synthesis of bimetallic systems using replacement reactions

Series of bimetallic systems were prepared by replacement reactions and characterized by XRD and XPS. The results suggest that the ad-metals are monolayer dispersed on the surface of sub-metal in Pd(Pt, Cu)/Co(Ni) systems, while in Pd(Pt, Au)/Cu systems surface solid solution is formed. In Ag(Au)/Co(Ni) and Ag/Cu systems no interaction between the metals is observed just as in the simple mixture of the respective crystallites. The outermost electronic configurations, the atomic radius of the metals, and the low-preparation temperature seem to be important factors for the different states of these bimetallic catalysts.     

Methanol decomposition on platinum (111)

The interaction of methanol with clean and oxygen-covered Pt(111) surfaces has been examined with high resolution electron loss spectroscopy (EELS) and thermal desorption spectroscopy (TDS). On the clean Pt(111) surface, methanol dehydrogenated above 140 K to form adsorbed carbon monoxide and hydrogen. On a Pt(111)-p(2 × 2)O surface, methanol formed a methoxy species (CH₃O) and adsorbed water. The methoxy species was unstable above 170 K and decomposed to form adsorbed CO and hydrogen. Above room temperature, hydrogen and carbon monoxide desorbed near 360 and 470 K, respectively. The instability of methanol and methoxy groups on the Pt surface is in agreement with the dehydrogenation reaction observed on W, Ru, Pd and Ni surfaces at low pressures. This is in contrast with the higher stability of methoxy groups on silver and copper surfaces, where decomposition to formaldehyde and hydrogen occurs. The hypothesis is proposed that metals with low heats of adsorption of CO and H₂ (Ag, Cu) may selectively form formaldehyde via the methoxy intermediate, whereas other metals with high CO and H₂ chemisorption heats rapidly dehydrogenate methoxy species below room temperature.     

Control and enhancement of structural and magnetic properties of Co/Pd multilayer by seeded epitaxy

Effects of Co seed layer on the structural and magnetic properties of Co/Pd multilayers have been studied. Reflection high-energy electron diffraction measurements showed a possible control of the crystal orientation of Pd buffer layer from polycrystalline to face-centered cubic (111) orientation when using Co seed layer. Additionally, atomic force microscopy observations confirmed the ability of Co seed layer to flatten the Pd buffer layer drastically. In fact, the usage of Co seed layer has decreased the root-mean-square roughness from 2.3 to 0.23 nm. As for controlling the structural properties of Pd buffer layer, the effective perpendicular magnetic anisotropy constant was enhanced, mainly by the improvement of surface anisotropy. Electronic states of α-Al₂O₃(0001)/metal interface obtained by electron energy loss spectroscopy proved that these differences were the fruit of the interaction between the metal layer and oxygen atoms on the Al₂O₃(0001) surface.     

Monte Carlo simulation of surface segregation phenomena in extended and nanoparticle surfaces of Pt-Pd alloys

The surface segregation phenomena in the extended and nanoparticle surfaces of Pt-Pd alloys have been studied using the Monte Carlo (MC) simulation method and the modified embedded-atom method (MEAM) potentials developed for Pt-Pd alloys. The MEAM potentials were fitted to reproduce the experimental values of the lattice parameters, cohesive energies and surface energies of pure Pt and Pd metals, as well as the density functional theory calculation results of the lattice parameters and heat of formation of L1(2) Pt(3)Pd, L1(0) PtPd and L1(2) PtPd(3) crystal. Using the MC method and the developed MEAM potentials, we calculated the Pt concentrations in the outermost three layers of the equilibrium (111), (100) and (110) extended surfaces as well as the outermost surfaces of the equilibrium cubo-octahedral nanoparticles of Pt-Pd alloys. Our simulation results showed that the Pd atoms would segregate into the outermost layers of the extended surfaces and the Pt concentration would increase monotonically from the extended surfaces into the bulk. The equilibrium Pt-Pd nanoparticles were found to have Pd-enriched shells and Pt-enriched cores. In the shell of the Pt-Pd nanoparticles, the Pd atoms were predicted to preferably segregate to the (100) facets rather than the (111) facets.     

Adsorption of Xe atoms on metal surfaces: new insights from first-principles calculations

The adsorption of rare gases on metal surfaces serves as the paradigm of weak adsorption where it is typically assumed that the adsorbate occupies maximally coordinated hollow sites. Density-functional theory calculations using the full-potential linearized augmented plane wave method for Xe adatoms on Mg(0001), Al(111), Ti(0001), Cu(111), Pd(111), and Pt(111), show, however, that Xe prefers low coordination on-top sites in all cases. We identify the importance of polarization and a site-dependent Pauli repulsion in actuating the site preference and the principle nature of the rare-gas atom-metal surface interaction.     

Cu-Co双金属团簇结构演化及其性质的分子动力学模拟

采用分子动力学结合嵌入原子方法对比研究了Co分布于Cu-Co团簇不同层的结构和性质.研究表明:Co原子分层掺杂可对团簇的结构转变点和熔点进行诱导控制;分层掺杂的Cu-Co团簇第一相变是一种扩散度较小的由立方八面体转变为二十面体的相变;Co原子易于向低能态团簇的亚表层(111)面偏析,从而诱导团簇结构紊乱,造成其熔点差异.     

Cu-Co双金属团簇结构演化及其性质的分子动力学模拟

采用分子动力学结合嵌入原子方法对比研究了Co分布于Cu-Co团簇不同层的结构和性质. 研究表明：Co原子分层掺杂可对团簇的结构转变点和熔点进行诱导控制;分层掺杂的Cu-Co团簇第一相变是一种扩散度较小的由立方八面体转变为二十面体的相变;Co原子易于向低能态团簇的亚表层（111）面偏析, 从而诱导团簇结构紊乱, 造成其熔点差异.     

Adsorptions and diffusions of carbon atoms on the surface and in the subsurface of Co （200）： A first-principles density-functional study

First-principles calculations based on density functional theory are used to investigate the adsorptions and diffusions of carbon atoms on the surface and in the subsurface of Co(200). The preferred site for the carbon atom on the surface is the hollow site, and the preferred site in the subsurface is the octahedral site. There is charge transfer from the surface to the adsorbed carbon atom, and for the most favorable adsorbed structure the charge transfer is largest. Moreover, the energy barriers for the diffusions of carbon atoms on the surface and from the surface into the subsurface and then back to the surface are calculated in detail. The results indicate that the energy barrier for the diffusion of carbon atoms on the surface is comparable to that from the subsurface to the surface. The results imply that both the direct surface nucleation and the surface segregation from Co bulk can be observed in the chemical vapor deposition growth of graphene on Co(200)substrate, which can gain a new insight into the growth mechanism of graphene.     

硫偏析在钼(111)表面上的有序结构

用AES和LEFD在700—800℃温度范围内研究了硫在钼(111)表面上的偏析动力学和表面结构。样品加热到800℃硫迅速地偏析到表面上并逐步地取代了表面上的碳。加热到700℃硫没有明显的表面偏析。硫的偏析主要受它的体扩散速率的控制,表面碳的存在也抑制了硫的表面偏析。不同温度下的偏析动力学实验后,分别进行了低能电子衍射实验,观察到钼(111)(3^1/2×3^1/2)R30°-硫和1/3(⁴⁴_-99)-硫两种表面结构的低能 关键词：     

Adhesion and bonding of Pt/Ni and Pt/Co overlayers: Density functional calculations

The electronic and energetic properties of bimetallic surfaces Pt/Ni(111) and Pt/Co(111) are examined using the FP-LAPW (Full-PotentialLinearized Augmented Plane Wave) method by means of spin-polarized and non-polarized calculations. We present both the results of the shifts in the d-band centers when one metal (Pt) is pseudomorfically deposited on another with smaller lattice constant (Ni, Co) and those corresponding to the surface and adhesion energies. The surface is modeled by a seven layer slab separated in z direction by a vacuum region of six substrate layers. The results obtained for pure Ni, Co and Pt surfaces are presented in order to compare with experimental and theoretical data reported in the literature     

A LEED study of the deposition of carbon on platinum crystal surfaces

The deposition of carbon is studied by LEED on four platinum crystal faces: two low-index surfaces Pt(100), Pt(111)and two stepped surfaces Pt(S) ? [5(100) × (111)], a vicinal of (100), Pt(S)?[6(111) × (100)], a vicinal of (111). Carbon, generated by flowing ethylene onto the hot platinum, causes the formation of a graphitic overlayer and surface rearrangements of the substrate. The threshold temperature for graphitization is the lowest on Pt(100). The overlayer exhibits a single preferred orientation on Pt(100), several orientations on Pt(111) and its vicinal. Ordered carbon structures can be detected on the vicinal of (111) for low carbon doses. The orientations found in spot patterns (perfect registry) or ring-like patterns (imperfect alignment) can be associated with a coincidence-site lattice condition at the Pt/C interface. Faceting is observed except on Pt(111); the vicinal of (100) is particularly unstable. The stepped array on the vicinal of (111) starts to disorder at 350°C and can be converted into a hill and valley configuration at higher temperatures and carbon doses. Implications for catalytic studies are discussed.     

Magnetic anisotropy of transition-metal interfaces from a local perspective: reorientation transitions and spin-canted phases in Pd capped Co films on Pd(111)

Layer-resolved self-consistent electronic calculations of magnetic anisotropy energy (MAE) provide new insight to the off-plane magnetization observed in Pd capped Co films on Pd(111). We demonstrate that the transition from perpendicular to in-plane phases with increasing film thickness involves an intermediate spin-canted phase. The interfaces responsible for the stability of the off-plane easy axes are characterized microscopically. A local analysis of the MAEs reveals an unexpected internal magnetic structure of the Co-Pd interfaces in which the magnetic moments and spin-orbit interactions at the Pd atoms play a crucial role.     

Substrate dependent sublimation kinetics of mesoscopic ice films

We have measured the sublimation kinetics of 2–30 nm thick ice layers deposited in ultra high vacuum at 100 K, on different surfaces; Pt(111) and graphite (0001) surfaces with and without various pre-adsorbed monolayers. The results reveal (i) a much more complex sublimation kinetics than expected for a simple molecular solid, and (ii) a strong influence of the underlying substrate on the kinetics. These features, which are reproduced by computer simulations, are due to (i) a phase transition from amorphous to crystalline ice during sublimation, and (ii) substrate dependent nucleation and growth of the ice layers, respectively. The results are correlated with the hydrophobicity-hydrophilicity of the surfaces, and suggest a new method to characterize the wetting properties of solid surfaces. It can be easily performed with state-of-the-art surface cleanliness control, contrary to conventional wetting methods. Applied to the present results, and those of Smith et al. in the preceding paper [Surf. Sci. 367 (1996) L13], this gives, in order of decreasing wetting of water; clean Pt(111)>cleanRu(001)>Cs covered graphite>clean graphite>octane covered Pt(111)⩾clean Au(111).