Selective preparation of oxygen-rich [60]fullerene derivatives by stepwise addition of tert-butylperoxy radical and further functionalization of the fullerene mixed peroxides

tert-Butylperoxy radicals add to C(60) selectively to form multi-adducts C(60)(O)(m)(OO(t)Bu)(n) (m = 0, n = 2, 4, 6; m = 1, n = 0, 2, 4, 6) in moderate yields under various conditions. Visible light irradiation favors epoxide formation. High concentration of tert-butylperoxy radicals mainly produces the hexa-homoadduct C(60)(OO(t)Bu)(6) 6; low concentration and long reaction time favor the epoxy-containing C(60)(O)(OO(t)Bu)(4) 7. The reaction can be stopped at the bis-adducts with limited TBHP. A stepwise addition mechanism is discussed involving mono-, allyl-, and cyclopentadienyl C(60) radical intermediates. m-CPBA reacts with the 1,4-bis-adduct to form C(60)(O)(OO(t)Bu)(2) and C(60)(O)(3)(OO(t)Bu)(2). The C-O bond of the epoxy ring in 7 can be cleaved with HNO(3) and CF(3)COOH. Nucleophilic addition of NaOMe to 7 follows the S(N)1 and extended S(N)2' mechanism, from which four products are isolated with the general formula C(60)(O)(a)(OH)(b)(OMe)(c)(OO(t)Bu)(d). Visible light irradiation of the hexa-adduct 6 results in partial cleavage of both the C-O and O-O bonds of peroxide moieties and formation of the cage-opened compound C(60)(O)(O)(2)(OO(t)Bu)(4). All the fullerene derivatives are characterized by spectroscopic data. A single-crystal structure has been obtained for an isomer of C(60)(O)(OH)(2)(OMe)(4)(OO(t)Bu)(2).     

Head-to-Tail and Back-to-Back Dimerization of an Open-Cage Fullerene Derivative through π-π Interaction-Based Self-Assembly

Open-cage fullerene derivative 2, C(59)(O)(4)(NAr)(2) (Ar = p-tBuC(6)H(4)), was prepared from 1, C(60)(O)(4)(OH)(2)(NAr)(2), through processes involving decarbonylation and elimination of the two hydroxyl groups. The phenyl groups in compound 2 act as chelating ligands for the fullerene cage and induce partial dimerization of 2 in solution. The single crystal X-ray structure of 2 shows strong intradimer π-π interactions and also weaker interdimer CH-π and π-π interactions.     

Acylation of 2,5-dimethoxycarbonyl[60]fulleropyrrolidine and synthesis of its multifullerene derivatives

2,5-Dimethoxycarbonyl[60]fulleropyrrolidine (1) is acylated with various chlorocarbonyl compounds to give fullerene derivatives with the general formula C(60)(MeOOCCH)(2)NC(O)R, R = (CH(2))(5)Br, (CH(2))(8)C(O)Cl (3), (CH(2))(4)C(O)Cl, or cis-C(6)H(4)(C(O)Cl. The monoacylated sebacoyl derivative 3 readily reacts with alcohols and amines such as methanol, diethylamine, glycine methyl ester, and aza-18-crown-6 through the remaining chlorocarbonyl group. Chromatography of 3 on silica gel converts it into the corresponding acid C(60)(MeOOCCH)(2)NC(O)(CH(2))(8)COOH (4). Treating 4 with PCl(5) regenerates the precursor 3 quantitatively. Piperazine reacts with 4 in the presence of DCC and BtOH to form a bisfullerene derivative in which two sebacoyl chains and the piperazine act as the bridge between two molecules of 1. Other molecules with multifunctional groups react with 4 similarly to form multifullerene derivatives. NMR data indicate that the rotation of the relatively bulky phthaloyl group is hindered around the amide bond N [bond] C(O), the rotation barrier of which is 15.06 kcal/mol. The relative stereochemistry of the 2,5-dimethoxycarbonyl groups is established by (1)H NMR spectra and further confirmed by resolution of the enantiomeric 2,5-trans-isomer of the starting material 1.     

Thermally stable perfluoroalkylfullerenes with the skew-pentagonal-pyramid pattern: C60(C2F5)4O, C60(CF3)4O, and C60(CF3)6

Reaction of C(60) with CF(3)I at 550 degrees C, which is known to produce a single isomer of C(60)(CF(3))(2,4,6) and multiple isomers of C(60)(CF(3))(8,10), has now been found to produce an isomer of C(60)(CF(3))(6) with the C(s)-C(60)X(6) skew-pentagonal-pyramid (SPP) addition pattern and an epoxide with the C(s)-C(60)X(4)O variation of the SPP addition pattern, C(s)-C(60)(CF(3))(4)O. The structurally similar epoxide C(s)-C(60)(C(2)F(5))(4)O is one of the products of the reaction of C(60) with C(2)F(5)I at 430 degrees C. The three compounds have been characterized by mass spectrometry, DFT quantum chemical calculations, Raman, visible, and (19)F NMR spectroscopy, and, in the case of the two epoxides, single-crystal X-ray diffraction. The compound C(s)-C(60)(CF(3))(6) is the first [60]fullerene derivative with adjacent R(f) groups that are sufficiently sterically hindered to cause the (DFT-predicted) lengthening of the cage (CF(3))C-C(CF(3)) bond to 1.60 A as well as to give rise to a rare, non-fast-exchange-limit (19)F NMR spectrum at 20 degrees C. The compounds C(s)-C(60)(CF(3))(4)O and C(s)-C(60)(C(2)F(5))(4)O are the first poly(perfluoroalkyl)fullerene derivatives with a non-fluorine-containing exohedral substituent and the first fullerene epoxides known to be stable at elevated temperatures. All three compounds demonstrate that the SPP addition pattern is at least kinetically stable, if not thermodynamically stable, at temperatures exceeding 400 degrees C. The high-temperature synthesis of the two epoxides also indicates that perfluoroalkyl substituents can enhance the thermal stability of fullerene derivatives with other substituents.     

Fullerenes as a tert-butylperoxy radical trap,metal catalyzed reaction of tert-butyl hydroperoxide with fullerenes,and formation of the first fullerene mixed peroxides C(60)(O)(OO(t)Bu)(4) and C(70)(OO(Bu)(10)

tert-Butylperoxy radicals generated by TBHP and Ru(PPh3)3Cl2 or other catalysts adds to C60 and C70 to form stable multiadducts, C60(O)(OOtBu)4 and C70(OOtBu)10. The four tert-butylperoxy groups in the C60 mixed peroxide are located around a pentagon, and the epoxy O occupies the remaining 6,6-bond connected to the same pentagon. The C70 decaadduct shows an unprecedented C2 symmetry with the 10 tert-butylperoxy groups added around the central part of C70 by consecutive 1,4-addition. The compounds are fully characterized by spectroscopic data.     

Reactivity of fullerene epoxide: preparation of fullerene-fused thiirane, tetrahydrothiazolidin-2-one, and 1,3-dioxolane

The epoxide moiety in the fullerene-mixed peroxide C60(O)(OOtBu)4 1 reacts readily with aryl isocyanates ArNCS (Ar = Ph, Naph) to form both the thiirane derivative C60(S)(OOtBu)4 and fullerene-fused tetrahydrothiazolidin-2-one. The reaction of 1 with trimethylsilyl isothiocyanate TMSNCS yields the isothiocyanate derivative C60(NCS)(OH)(OOtBu)4, the isothiocyanate and hydroxyl moieties of which could be converted to a fullerene-fused tetrahydrothiazolidin-2-one ring with alumina quantitatively. Treating 1 with BF3.Et2O yields the fullerene-fused [1,3,2]-dioxoborolane derivative C60(O2BOH)(OOtBu)4. In the presence of aldehyde or acetone, BF3.Et2O catalyzes the conversion of epoxide to fullerene-fused 1,3-dioxolane derivatives. The products are characterized by spectroscopic data. Two of the compounds are also characterized by single-crystal X-ray analysis.     

Synthetic and structural studies on new diiron azadithiolate (ADT)-type model compounds for active site of [FeFe]hydrogenases

A series of new diiron azadithiolate (ADT) complexes (1-8), which could be regarded as the active site models of [FeFe]hydrogenases, have been synthesized starting from parent complex [(μ-SCH(2))(2)NCH(2)CH(2)OH]Fe(2)(CO)(6) (A). Treatment of A with ethyl malonyl chloride or malonyl dichloride in the presence of pyridine afforded the malonyl-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(6) (1) and [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (2). Further treatment of 1 and 2 with PPh(3) under different conditions produced the PPh(3)-substituted complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (3), [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CCH(2)CO(2)Et]Fe(2)(CO)(4)(PPh(3))(2) (4), and [Fe(2)(CO)(5)(PPh(3))(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)CH(2) (5). More interestingly, complexes 1-3 could react with C(60) in the presence of CBr(4) and 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) via Bingel-Hirsch reaction to give the C(60)-containing complexes [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(6) (6), [Fe(2)(CO)(6)(μ-SCH(2))(2)NCH(2)CH(2)O(2)C](2)C(C(60)) (7), and [(μ-SCH(2))(2)NCH(2)CH(2)O(2)CC(C(60))CO(2)Et]Fe(2)(CO)(5)(PPh(3)) (8). The new ADT-type models 1-8 were characterized by elemental analysis and spectroscopy, whereas 2-4 were further studied by X-ray crystallography and 6-8 investigated in detail by DFT methods.     

Lewis acid promoted preparation of isomerically pure fullerenols from fullerene peroxides C60(OOt-Bu)6 and C60(O)(OOt-Bu)6

Fullerene mixed peroxides C60(t-BuOO)6 and C60(O)(t-BuOO)6 react with Lewis acids to form various fullerenols through the partial fragmentation of t-BuOO groups. Two monohydroxyl fullerenols with the general formula C60(OH)(t-BuOO)5 and six monohydroxyl fullerenols with the general formula C60(O)(OH)(t-BuOO)5 were prepared, which are essentially the same except the location of the OH group. An additional reaction of the monohydroxyl fullerenols gave bis- and trishydroxyl fullerenols. Single-crystal X-ray structures have been obtained for the two monohydroxyl fullerenols. Other compounds are characterized by chemical correlation and their spectroscopic data. Cuprous bromide could protect the most reactive t-BuOO group from being attacked by stronger Lewis acids. The proposed mechanism mainly involves Lewis acid induced heterolysis of the peroxo O-O bond.     

Synthesis of 18-membered open-cage fullerenes through controlled stepwise fullerene skeleton bond cleavage processes and substituent-mediated tuning of the redox potential of open-cage fullerenes

Oxidation of the fullerenediol C(60)(OH)(2)(O)(OAc)(OOtBu)(3) with PhI(OAc)(2) yields the open-cage fullerene derivative C(60)(O)(2)(O)(OAc)(OOtBu)(3)2 with an 11-membered orifice. Compound 2 reacts with aniline to form a new open-cage derivative with a 14-membered orifice, which yields an 18-membered open-cage fullerene derivative upon addition of another molecule of aniline. Two different types of aniline derivatives with either electron-donating or electron-withdrawing substituents can be added sequentially, affording an unsymmetrical moiety in the open-cage structure. Reduction potentials of the 18-membered open-cage fullerene derivatives can be fine-tuned by changing the substituents on the aniline. The results provide new insights about the mechanism of open-cage reactions of fullerene-mixed peroxide.     

Photo-induced reactive oxygen species generation by different water-soluble fullerenes (C) and their cytotoxicity in human keratinocytes

Abstract In this study we report the phototoxicity toward HaCaT keratinocytes that results from the photogeneration of superoxide and singlet oxygen ((1)O(2)) by four different "water-soluble" fullerene (C(60)) preparations-monomeric (gamma-CyD)(2)/C(60) (gamma-cyclodextrin bicapped C(60)) and three aggregated forms-THF/nC(60) (prepared by solvent exchange from THF solution); Son/nC(60) (prepared by sonication of a toluene/water mixture); and gamma-CyD/nC(60) (prepared by heating the [gamma-CyD](2)/C(60) aqueous solution). Our results demonstrate that all four C(60) preparations photogenerate (1)O(2) efficiently. However, the properties of C(60)-generated (1)O(2), including its availability for reactions in solution, are markedly different for the monomeric and aggregated forms. (1)O(2) produced by monomeric (gamma-CyD)(2)/C(60) is quenchable by NaN(3) and its quantum yield in D(2)O, which is only weakly dependent on oxygen concentration, is as high as C(60) in toluene. In contrast, (1)O(2) generated from aggregated C(60) is not quenchable by NaN(3), exhibits a solvent-independent short-lived lifetime (ca 2.9 mus), is highly sensitive to oxygen concentration while its phosphorescence is redshifted. All these features indicate that (1)O(2) is sequestered inside the C(60) aggregates, which may explain why these preparations were not phototoxic toward HaCaT cells. Electron paramagnetic resonance studies demonstrated the generation of the C(60) anion radical (C(60)(*-)) when (gamma-CyD)(2)/C(60) was irradiated (lambda > 300 nm) in the presence of a reducing agent (NADH); spin trapping experiments (lambda > 400 nm) with 5,5-dimethyl-1-pyrroline N-oxide clearly showed the generation of superoxide resulting from the reaction of C(60)(*-) with oxygen. In vitro tests with HaCaT keratinocytes provided evidence that (gamma-CyD)(2)/C(60) phototoxicity is mainly mediated by (1)O(2) (Type II mechanism) with only a minor contribution from free radicals (Type I mechanism).     

Modified polyoxometalates: Hydrothermal syntheses and crystal structures of three novel reduced and capped Keggin derivatives decorated by transition metal complexes

Three novel polyoxometalate derivatives decorated by transition metal complexes have been hydrothermally synthesized. Compound 1 consists of [PMo(VI)(6)Mo(V)(2)V(IV)(8)O(44)[Co (2,2'-bipy)(2)(H(2)O)](4)](3+) polyoxocations and [PMo(VI)(4-)Mo(V)(4)V(IV)(8)O(44)[Co(2,2'-bipy)(2)(H(2)O)](2)](3-) polyoxoanions, which are both built on mixed-metal tetracapped [PMo(8)V(8)O(44)] subunits covalently bonded to four or two [Co(2,2'-bpy)(2)(H(2)O)](2+) clusters via terminal oxo groups of the capping V atoms. Compound 2 is built on [PMo(VI)(8)V(IV)(6)O(42)[Cu(I)(phen)](2)](5-) clusters constructed from mixed-metal bicapped [PMo(VI)(8)V(IV)(6)O(42)](7-) subunits covalently bonded to two [Cu(phen)](+) fragments in the similar way to 1. The structure of 3 is composed of [PMo(VI)(9)Mo(V)(3)O(40)](6-) units capped by two divalent Ni atoms via four bridging oxo groups. The crystal data for these are the following: C(120)H(126)Co(6)Mo(16)N(24)O(103)P(2)V(16) (1), triclinic P1, a = 15.6727(2) A, b = 17.3155(3) A, c = 19.5445(2) A, alpha = 86.1520(1) degrees, beta = 81.2010(1) degrees, gamma = 63.5970(1) degrees, Z = 1; C(120)H(85)Cu(6-)Mo(8)N(20)O(44)PV(6) (2), triclinic P1, a = 14.565(4) A, b = 15.899(3) A, c = 16.246(4) A, alpha = 116.289(2) degrees, beta = 103.084(2) degrees, gamma = 94.796(2) degrees, Z = 1; C(60)H(40)Mo(12)N(10)Ni(3)O(40)P (3), monoclinic P2(1)/c, a = 14.804(3) A, b = 22.137(4) A, c = 25.162(5) A, alpha = 90 degrees, beta = 98.59(3) degrees, gamma = 90 degrees, Z = 4.     

Synthesis and structural characterization of some new porphyrin-fullerene dyads and their application in photoinduced H2 evolution

The [3 + 2] cycloaddition reaction of C(60) with ethyl isonicotinoylacetate in the presence of piperidine in PhCl at room temperature or in the presence of Mn(OAc)(3) in refluxing PhCl gave the pyridyl-containing dihydrofuran-fused C(60) derivative (4-C(5)H(4)N)C(O)═C(C(60))CO(2)Et (1), whereas the phenyl-containing C(60) derivative PhC(O)═C(C(60))CO(2)Et (2) was similarly prepared by [3 + 2] cycloaddition reaction of C(60) with ethyl benzoylacetate in the presence of piperidine or Mn(OAc)(3). More interestingly, one of the new porphyrin-fullerene dyads, i.e., [4-C(5)H(4)NC(O)═C(C(60))CO(2)Et]·ZnTPPH (3, ZnTPPH = tetraphenylporphyrinozinc), could be prepared by coordination reaction of the pyridyl-containing C(60) derivative 1 with equimolar ZnTPPH in CS(2)/hexane at room temperature. In addition, the β-keto ester-substituted porphyrin derivative H(2)TPPC(O)CH(2)CO(2)Et (4) was prepared by a sequential reaction of HO(2)CCH(2)CO(2)Et with n-BuLi in 1:2 molar ratio followed by treatment with H(2)TPPC(O)Cl in the presence of Et(3)N and then hydrolysis with diluted HCl, whereas the porphyrinozinc derivative ZnTPPC(O)CH(2)CO(2)Et (5) could be prepared by coordination reaction of 4 with Zn(OAc)(2) in refluxing CHCl(3)/MeOH. Particularly interesting is that the second new porphyrin-fullerene dyad H(2)TPPC(O)═C(C(60))CO(2)Et (6) could be prepared by [3 + 2] cycloaddition reaction of 4 with C(60) in the presence of piperidine in PhCl at room temperature. In addition, treatment of 6 with Zn(OAc)(2) in refluxing CHCl(3)/MeOH afforded the third new dyad ZnTPPC(O)═C(C(60))CO(2)Et (7). All the new compounds 1-7 were characterized by elemental analysis and various spectroscopic methods and particularly for 2, 3, and 5 by X-ray crystallography. The five-component system consisting of an electron donor EDTA, dyad 3, an electron mediator methylviologen (MV(2+)), the catalyst colloidal Pt, and a proton source HOAc was proved to be effective for photoinduced H(2) evolution. A possible pathway for such a type of H(2) evolution was proposed.     

Synthesis of a green [60]fullerene derivative through cage-opening reactions

Open-cage derivative C(60)(O)(4)(OH)(2)(NC(6)H(4)(t)Bu)(2) reacts with ICl to form a Baeyer-Villiger type product, which yields an intense green product upon treatment with HI.     

Super-highly hydroxylated fullerene derivative protects human keratinocytes from UV-induced cell injuries together with the decreases in intracellular ROS generation and DNA damages

Polyhydroxylated fullerenes (fullerenols: C(60)(OH)(n)) are known as the major water-soluble fullerene derivatives which possess particular significance as free radical scavengers or antioxidants in biological systems. Recently, the novel polyhydroxylated fullerene (C(60) (OH)(44)·8H(2)O: SHH-F) was successfully synthesized. In the present study, we investigated the radical-scavenging effects and cytoprotective effects of three types of fullerenols (C(60)(OH)(6-12): LH-F, C(60) (OH)(32-34)·7H(2)O: HH-F, and C(60) (OH)(44)·8H(2)O: SHH-F) on UV-irradiation-induced cell injuries. HH-F and SHH-F exerted hydroxyl-radical scavenging activities as shown by DMPO-spin trap/ESR method, more markedly than LH-F. UVA or UVB irradiation-induced injuries in human skin keratinocytes HaCaT were significantly suppressed by HH-F and SHH-F, but scarcely by LF-H. The cytoprotective effects of SHH-F had a tendency to be superior to that of HH-F. And the cytoprotective effects of SHH-F against UVB-induced injuries were more effective than those of UVA. Irradiation with UVB to HaCaT cells was shown to cause rapid increases in cell-injury-associated symptoms such as intracellular oxidative stress levels, the formation of cyclobutane pyrimidine dimers and chromatin condensation, all of which were repressed by SHH-F. Thus, UVB-induced diverse harmful effects could be prevented by SHH-F, which was suggested to exert the cytoprotective effects through intracellular reactive oxygen species-scavenging in the keratinocytes.     

Bromination-mediated regioselective preparation of cyclopentadienyl-type [60]fullerene derivatives with alkoxy, peroxy, and bromo or hydro addends

Bromine reacts with the 1,2-bisadduct C(60)(OOtBu)(2) efficiently to form the cyclopentadienyl-type compound 4 (C(60)(OOtBu)(2)Br(4)). In the presence of AgClO(4), the four bromine atoms can be replaced regioselectively by methoxyl groups in a stepwise fashion to form C(60)(OOtBu)(2)Br(4-x)(OMe)(x). A second alcohol may be introduced by treating partially methoxylated compound 6 (C(60)(OOtBu)(2)Br(2)(OMe)(2)) with ROH/AgClO(4). Other related reactions have been investigated to explore the reactivity patterns. The structure of compound 6 was confirmed by single crystal X-ray analysis.     

Vanadate complexes bearing an imidazolidine-bridged bis(aryloxido) ligand: synthesis and solid state and solution structure

A new imidazolidine-bridged bis(aryloxido) ligand precursor (H(2)L) [H(2)L = 2,2'-(imidazolidine-1,3-diylbis(methylene))bis(4-(1,1,3,3-tetramethylbutyl-2-yl)phenol)] was prepared in a relatively high yield (～60%) via a single-step Mannich condensation of 4-(1,1,3,3-tetramethylbutyl)phenol, ethylenediamine and paraformaldehyde at 2:1:3 molar ratio and characterized by chemical and physical techniques including X-ray crystallography. Reactions of H(2)L with [VO(OEt)(3)] at 1:1 and 1:2 molar ratios in toluene afforded [V(L-κ(3)O,N,N,O)(O)(OEt)] (1) and [V(2)(μ-L-κ(4)O,N,N,O)(μ-OEt)(2)(O)(2)(OEt)(2)] (2), respectively. Alcoholysis of 1 with EtOH enables elimination of one molecule of H(2)L and the formation of 2. Compounds 1 and 2 were characterized by IR and NMR spectroscopy as well as ES-MS experiments. The definitive molecular structure of 2 was provided by a single-crystal analysis and revealed its dinuclear nature, featuring two octahedral vanadium centres bridged by both OEt groups and the L ligand. The (51)V, (1)H and (13)C NMR spectra as well as ES-MS showed that 2 does not stay intact in solution and undergoes dissociation to give 1 and [VO(OEt)(3)].     

Trinuclear, tetranuclear, and polymeric Cu(II) complexes from the first use of 2-pyridylcyanoxime in transition metal chemistry: synthetic, structural, and magnetic studies

The first use of 2-pyridylcyanoxime, (py)C(CN)NOH, in transition metal chemistry is described. Depending on the nature of the metal starting material and the reaction conditions employed, the Cu(II)/(py)C(CN)NOH system has provided access to complexes [Cu(3)O{(py)C(CN)NO}(3)(NO(3))(H(2)O)(2)(MeOH)] (1), [Cu(4)O{(py)C(CN)NO}(4)(O(2)CMe)(2)] (2), [Cu(4)(OH)(2){(py)C(CN)NO}(2)(O(2)CPh)(4)](2n)·n[Cu(4)(OH)(2){(py)C(CN)NO}(2)(O(2)CPh)(4)] (3), and [Cu{(py)C(CN)NO}(2)](n) (4). The molecule of 1 consists of three Cu(II) atoms in a strictly equilateral arrangement bridged by a central μ(3)-oxide group. The molecule of 2 consists of a tetrahedron of Cu(II) atoms held together by a central μ(4)-oxide ion, four η(1):η(1):η(1):μ-(py)C(CN)NO(-) ligands and two η(1):η(1):μ-MeCO(2)(-) groups. The crystal structure of 3 consists of [Cu(4)(OH)(2){(py)C(CN)NO}(2)(O(2)CPh)(4)](2n) double chains and discrete cluster [Cu(4)(OH)(2){(py)C(CN)NO}(2)(O(2)CPh)(4)] molecules. The crystal structure of 4 consists of neutral polymeric chains based on centrosymmetric mononuclear [Cu{(py)C(CN)NO}(2)] units. The Cu(II) atoms are doubly bridged by the oximate groups of two η(1):η(1):η(1):μ-(py)C(CN)NO(-) ligands. Variable-temperature, solid-state direct current (dc) magnetic susceptibility studies were carried out for 1-4. The data indicate very strong antiferromagnetic exchange interactions for 1-3. The obtained J values are discussed in depth on the basis of the structural parameters of the complexes, literature reports, and existing magnetostructural correlations.     

Syntheses, X-ray crystal structures, and optical, fluorescence, and nonlinear optical characterizations of diphenylphosphino-substituted bithiophenes

A series of bithiophene derivatives that are either symmetrically disubstituted with two Ph(2)(X)P groups (X = O, S, Se) or monosubstituted with one Ph(2)(X)P group (X = O, S, Se) and an organic functional group (H, CHO, CH(2)OH, CO(2)Me) have been synthesized. The X-ray crystal structures of Ph(2)(Se)P(C(4)H(2)S)(2)P(Se)Ph(2), Ph(2)(O)P(C(4)H(2)S)(2)H, Ph(2)(S)P(C(4)H(2)S)(2)H, and Ph(2)(O)P(C(4)H(2)S)(2)CH(2)OH exhibit very different solid-state structures depending on the type of intermolecular π-π interactions that occur. The compounds have been characterized by electronic absorption and fluorescence studies. Of particular interest is that the quantum yields of Ph(2)(O)P(C(4)H(2)S)(2)H, Ph(2)(O)P(C(4)H(2)S)(2)P(O)Ph(2), Ph(2)(O)P(C(4)H(2)S)(2)CO(2)Me, and Ph(2)(O)P(C(4)H(2)S)(2)CH(2)OH are significantly larger than that of bithiophene (factors of 13, 14, 14, and 22, respectively). This behavior is quite different from that of analogously substituted terthiophenes in which substitution results in only modest increases in the quantum yields over that of terthiophene (factors of 0.94, 2.7, 1.3, and 1.5, respectively). DFT studies of the emission process suggest that modifying the Ph(2)(X)P group affects both the fluorescence and nonradiative rate constants while modifications of the organic substituents primarily affect the nonradiative rate constants. The higher quantum yields of the substituted bithiophenes make them promising for application in organic light-emitting devices (OLED). The optical power limiting (OPL) performances of these Ph(2)(X)P-substituted bithiophenes were evaluated by nonlinear transmission measurements in the violet-blue spectral region (430-480 nm) with picosecond laser pulses. The OPL performances are enhanced by heavier X groups and when by higher solubilities. Saturated chloroform solutions of Ph(2)(O)P(C(4)H(2)S)(2)H and Ph(2)(S)P(C(4)H(2)S)(2)H exhibit significantly stronger nonlinear absorption than any previously reported compounds and are promising candidates for use in broadband optical power limiters.     

Arbuzov chemistry with chlorofullerene C(60)Cl(6): a powerful method for selective synthesis of highly functionalized [60]fullerene derivatives

We report Arbuzov-type reactions of chlorofullerene C(60)Cl(6) with trialkyl phosphites producing highly functionalized fullerene derivatives C(60)[P(O)(OR)(2)](5)H with high yields. The designed family of [60]fullerene phosphonic acids and their esters showed unusual properties which might find valuable material science applications.     

Active oxygen species generated from photoexcited fullerene (C60) as potential medicines: O2-* versus 1O2

To characterize fullerenes (C(60) and C(70)) as photosensitizers in biological systems, the generation of active oxygen species, through energy transfer (singlet oxygen (1)O(2)) and electron transfer (reduced active oxygen radicals such as superoxide anion radical O(2)(-)* and hydroxyl radical *OH), was studied by a combination of methods, including biochemical (DNA-cleavage assay in the presence of various scavengers of active oxygen species), physicochemical (EPR radical trapping and near-infrared spectrometry), and chemical methods (nitro blue tetrazolium (NBT) method). Whereas (1)O(2) was generated effectively by photoexcited C(60) in nonpolar solvents such as benzene and benzonitrile, we found that O(2)(-)* and *OH were produced instead of (1)O(2) in polar solvents such as water, especially in the presence of a physiological concentration of reductants including NADH. The above results, together with those of a DNA cleavage assay in the presence of various scavengers of specific active oxygen species, indicate that the active oxygen species primarily responsible for photoinduced DNA cleavage by C(60) under physiological conditions are reduced species such as O(2)(-)* and *OH.