Characterization of mesogen-jacketed liquid crystalline polymers by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

For synthetic polymers, a proper sample preparation method is essential for successful characterization by matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. In this work, six synthetic mesogen-jacketed liquid crystalline polymers (MJLCPs) with different main-chain, spacer and mesogenic units were investigated by MALDI-TOF mass spectrometry. Several factors that affect the analysis of these polymers were examined. These factors include matrices used, cationization salts used, the concentration of polymers, and the ratio of sample to matrix. After testing different conditions, we found a suitable sample preparation method for these six polymers. The number average molecular weight (M(n)), weight average molecular weight (M(w)) and polydispersity (PD) were calculated using data obtained in the linear mode. The end groups of the polymers were proposed using data obtained in reflectron mode. Copyright 2000 John Wiley & Sons, Ltd.     

Characterization of tetrathiofulvalene compounds using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Tetrathiofulvalene compounds are important components of charge-transfer complexes, which may be applied in various fields of scientific research and practical applications. Some of these compounds cannot be characterized by mass spectrometry. Here, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry was used for the characterization of tetrathiofulvalenes. The samples could be easily desorbed and ionized to form singly charged ions, and mass spectra with isotopic resolution readily obtained. The mass spectrometric results for 26 compounds have shown that MALDI-TOF is more effective and convenient than other mass spectrometry methods, and resolves the problem of mass spectrometric characterization of tetrathiofulvalene compounds.     

A 2,5-dihydroxybenzoic acid/N,N-dimethylaniline matrix for the analysis of oligosaccharides by matrix-assisted laser desorption/ionization mass spectrometry

The use of a novel 2,5-dihydroxybenzoic acid/N,N-dimethylaniline (DHB/DMA) matrix-assisted laser desorption/ionization (MALDI) matrix for detection and quantitative analysis of native N-linked oligosaccharides was investigated in this study. Substantial improvements in sensitivity were observed relative to the signals obtained with a traditional DHB matrix. Moreover, the morphology of the matrix crystal layer was very uniform, unlike that of DHB. This resulted in highly homogeneous sample distribution throughout the spot, allowing reproducible and consistent mass spectra to be obtained without spot-to-spot variations in signal. Here, we also demonstrate an approach for performing sensitive and accurate quantitative analysis of native N-linked glycans with this novel matrix using an internal standard method.     

Characterization of humic substances by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) and laser desorption/ionization (LDI-)TOFMS have been used to characterize Suwannee River humic substances, obtained from the International Humic Substances Society (IHSS), and Armadale soil fulvic acid (ASFA). An array of MALDI matrices were tested for use with humic substances, including alpha-cyano-4-hydroxycinammic acid (CHCA), 2-(4-hydroxyphenylazo)benzoic acid (HABA), 2,5-dihydroxybenzoic acid (DHBA), sinapinic acid, dithranol and norharmane. DHBA yielded the best results, exhibiting superior ionization efficiency, low noise, broad applicability to the analytes of interest, and most importantly producing an abundance of high mass ions, the highest observed being m/z 1848. A number of sample preparation modes were investigated; the overlayer method improved sample/matrix homogeneity and hence shot-to-shot reproducibility. The choice of the matrix, mass ratio of analyte to matrix, and the sample preparation protocol, were found to be the most critical factors governing the quality of the mass spectra. Matrix suppression was greatly enhanced by ensuring good mixing of matrix and analyte in the solid phase, proper optimization of the matrix/analyte ratio, and optimizing delayed extraction to ensure complete matrix-analyte reaction in the plume before ions are moved to the flight tube. A number of common features, in particular specific ions which could not be attributed to the matrices or to contaminants, were present in the spectra of all the humic substances, regardless of origin or operational definition. Additionally, a prominent repeating pattern of peaks separated by 55, 114 and 169 Da was clearly observed in both LDI and MALDI, suggesting that the humic compounds studied here may have quasi-polymeric or oligomeric features.     

Small molecule matrix-assisted laser desorption/ionization time-of-flight mass spectrometry using a polymer matrix

We have employed a light-absorbing electrically conductive polymer as a matrix to determine the molecular mass of small organic molecules using matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry. This method, which is in contrast to the usual MALDI strategy for matrix selection in which a small molecule matrix is used with a high molecular mass analyte, addresses the problem of matrix interference which limits the usefulness of MALDI-TOF for small molecule analysis. Use of negative ion mode offers advantages for this application. Using this approach, we have obtained clean molecular ion mass spectra of small organic molecules in the mass range 100-300 Da.     

Characterization of Aspergillus spores by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The intact fungal spores of several strains of four Aspergillus species, Aspergillus flavus, A. oryzae, A. parasiticus, and A. sojae, were directly analyzed by matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectrometry. Very simple MALDI mass spectra are obtained by directly mixing spores with a matrix such as alpha-cyano-4-hydroxycinnamic acid or sinapinic acid. The mass spectra are obtained from the ablation of cell walls of spores owing to the acidity of the matrix solution. The MALDI results show that aflatoxigenic strains and non-aflatoxigenic strains have different mass peak profiles. Furthermore, the MALDI results of non-aflatoxigenic A. flavus and A. parasiticus spores resemble those of the closely related A. oryzae and A. sojae spores, respectively.     

Identification of isoenzymes using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

The identification of isoforms is one of the great challenges in proteomics due to the large number of identical amino acids preventing their separations by two-dimensional electrophoresis. Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) has become a rapid and sensitive tool in proteomics, notably with the new instrumental improvements. In this study, we used several acquisition modes of MALDI-TOFMS to identify isoforms of porcine glutathiones S-transferase. The use of multiple proteases coupled to the different acquisition modes of MALDI-TOFMS (linear, reflectron, post-source decay (PSD) and in-source decay, positive and negative modes) allowed the identification of two sequences. Moreover, a third sequence is pointed out from a PSD study of a tryptic ion revealing the modification of the amino acid tyrosine 146 to phenylalanine.     

A binary matrix of 2,5-dihydroxybenzoic acid and glycerol produces homogenous sample preparations for matrix-assisted laser desorption/ionization mass spectrometry

We introduce a two-component matrix for ultraviolet matrix-assisted laser desorption/ionization mass spectrometry (UV-MALDI-MS) that consists of 2,5-dihydroxybenzoic acid (DHB) and glycerol. Upon slow evaporation of residual water/methanol solvents in a pre-vacuum chamber sample preparations are obtained that exhibit a homogeneous morphology with analyte-matrix crystals evenly distributed over the whole sample spot. At a molar DHB/glycerol ratio of approximately 1:5, the crystals range in length from approximately 100 to 300 microm and are about 15-30 microm wide. Mass spectra of peptides, proteins, and an oligosaccharide are presented and compared with those recorded from standard dried-droplet DHB matrix. The ion signals show a reproducibility of the order of 10-15% when scanning the surface of an individual sample or even different samples that contain the same amount of peptide, A close to linear relationship between peptide concentration and the corresponding peptide ion signal is found over three orders of magnitude of sample prepared. However, when a fixed position is irradiated with a large number of laser pulses, a monotonous decay of peptide ion signal with time is observed. Potentially, the binary matrix will be especially useful for the analysis of samples that are stabilized in buffered aqueous glycerol solution and preliminary results addressing this aspect are shown.     

Matrix-assisted laser desorption/ionization mass spectrometry with additives to 2,5-dihydroxybenzoic acid

Selected benzoic acid derivatives and related substances were used as additives to 2,5-dihydroxybenzoic acid (2,5DHB) and the performance of the mixtures in matrix-assisted laser desorption/ionization mass spectrometry was investigated. Using benzoic acid derivatives substituted at position 2 and/or 5 or related substances as a co-matrix in the 1–10% range with 2,5DHB results in improved ion yields and signal-to-noise ratio of analyte molecules, especially for the high-mass range. The enhanced performance is prominent for 2-hydroxy-5-methoxybenzoic acid and exists for both proteins and oligosaccharides. It is suggested that the improvement is caused by a disorder in the 2,5DHB crystal lattice allowing ‘softer’ desorption. Charge transfer from matrix ions to additive molecules at the expense of analyte ionization gives a simple explanation for the deteriorating effects of some tested additives.     

Matrix-assisted laser desorption/ionization mass spectrometry with re-engineered 2,5-dihydroxybenzoic acid derivative

Dihydroxybenzoic acid was modified to three analogues (M2, M4 and M6). The analogues exhibited specific properties that resulted in enhancement of analyte signal intensity with or without addition of iodine compared to the underivatized parent. Addition of iodine to M2, an ester of dihydroxybenzoic acid that had a terminal double bond in the alkyl chain, resulted in peak intensities comparable to the parent, indicating that iodine interaction across the double bond resulted in enhancement although the exact mechanism is not fully understood. No enhancement on addition of iodine was observed for M4, which had a long alkyl chain that contained no double bonds. The alkyl chain allowed micelle formation in solution, which in turn allowed more uniform analyte-to-matrix mixing. The final analogue combined the long alkyl chain of M4 with the double bond of M2 and exhibited either similar peak intensities to that of dihydroxybenzoic acid or better. Micelle formation in solution was examined using spectroscopy and in the solid by reflective microscopy. The standard deviation from spot to spot was considerably lower relative to dihydroxybenzoic acid (RSD 3.4%vs. 14.2%). Unlike dihydroxybenzoic acid, the novel matrix M6 was able to yield characteristic peaks for analytes such as ubiquitin.     

Characterization of an insoluble polyimide oligomer by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

In the past two years, papers have appeared in the literature which demonstrate that matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectra can be obtained from matrix-analyte preparations which have been produced by grinding the two materials together until a powder of small particle size is obtained. In the present study that methodology was modified and applied to an insoluble polyimide oligomer, poly(4,4'-oxydiphenylenepyromellitimide) (POPM). Two matrix materials were employed in this analysis, 1,8 dihydroxyanthrone (dithranol) and 3-aminoquinoline, with and without an additional cationizing agent. The spectra obtained by this method are shown to be sensitive to the matrix employed in the analysis as well as the quantity of cationizing agent combined with the matrix.     

Characterization of recombinant human serum albumin using matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Chromatographically purified recombinant human serum albumin (rHSA), produced in genetically transformed yeast cells, was characterized using matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) MS techniques. The molecular mass of the intact protein was determined to be 66671, in good agreement with that of purified HSA which was used as a standard. The identity of rHSA to its natural counterpart was established with high precision using peptide mass fingerprinting of tryptic peptides. Partial amino acid sequence data for rHSA were obtained using Ettan CAF MALDI Sequencing Kit and post-source decay on the tryptic peptides. The results achieved provide strong evidence that MALDI-TOF-MS is an important analytical technique for characterising gene products and for establishing the identity and bio-compatibility of recombinant proteins relative to their natural counterparts.     

Characterization of partially transesterified poly(beta-hydroxyalkanoate)s by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was used for the characterization of a partially transesterified poly(beta-hydroxyalkanoate) (PHA), a polymer produced by the bacterial strain Alcaligenes eutrophus with saponified vegetable oils as the sole carbon sources. The transesterification was carried out separately under acidic and basic conditions to obtain PHA oligomers weighing <10 kDa. The intact oligomers were detected in their cationized forms, [M + Na]+ and [M + K]+, by MALDI-TOFMS. A composition analysis, using the MALDI-TOF spectra, indicated that the oligomers obtained via acid catalysis contained a methyl 3-hydroxybutyrate end group, and those obtained by base catalysis had a methyl crotonate (olefinic) end group. In addition to hydroxybutyrate (HB), the oligomers were found to contain a small percentage of hydroxyvalerate, which was independently confirmed by gas chromatography/mass spectrometry. In comparison, analysis of a commercial PHA polymer, transesterified under identical conditions, showed only the presence of HB, i.e., a pure poly(HB) homopolymer.     

Characterization of silsesquioxanes by size-exclusion chromatography and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

Liquid chromatography in combination with spectroscopic methods like matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) or nuclear magnetic resonance (NMR) spectroscopy is a powerful method to characterize silsesquioxanes and silsesquioxane mixtures. As new examples, the formation of silsesquioxyl-substituted silsesquioxanes [(n-octyl)(7)(SiO(1.5))(8)](2)O and [(n-octyl)(7)(SiO(1.5))(8)O](2)[(n-octyl)(6)(SiO(1.5))(8)] as well as the cage rearrangement of octa-[(n-heptyl)silsesquioxane] to larger structures [(n-heptyl)SiO(1.5))](n) up to n=28 are shown.     

Characterization of phosphopeptides from protein digests using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and nanoelectrospray quadrupole time-of-flight mass spectrometry

A two-step mass spectrometric method for characterization of phosphopeptides from peptide mixtures is presented. In the first step, phosphopeptide candidates were identified by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) based on their higher relative intensities in negative ion MALDI spectra than in positive ion MALDI spectra. The detection limit for this step was found to be 18 femtomoles or lower in the case of unfractionated in-solution digests of a model phosphoprotein, beta-casein. In the second step, nanoelectrospray tandem mass (nES-MS/MS) spectra of doubly or triply charged precursor ions of these candidate phosphopeptides were obtained using a quadrupole time-of-flight (Q-TOF) mass spectrometer. This step provided information about the phosphorylated residues, and ruled out nonphosphorylated candidates, for these peptides. After [(32)P] labeling and reverse-phase high-performance liquid chromatography (RP-HPLC) to simplify the mixtures and to monitor the efficiency of phosphopeptide identification, we used this method to identify multiple autophosphorylation sites on the PKR-like endoplasmic reticulum kinase (PERK), a recently discovered mammalian stress-response protein.     

Importance of matrix: Analyte ratio for buffer tolerance using 2,5-dihydroxybenzoic acid as a matrix in matrix-assisted laser desorption/ionization-fourier transform mass spectrometry and matrix-assisted laser desorption/ionization-time of flight

Many biological samples destined for matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) contain buffers. The presence of these buffers often inhibits the ability to obtain spectra. Here, the results of a study of the effects of six different buffers on spectra of three representative small proteins are reported utilizing 2,5-dihydroxybenzoic acid as matrix. These proteins, bovine insulin, cytochrome c, and bovine albumin have masses from ～5000 to 66,000 Da. Three different sample preparation techniques were investigated: aerospray, dried-drop, and acetone redeposition. Both MALDI Fourier transform and time-of-flight mass spectrometry results show that buffer tolerance of MALDI-MS samples depends upon several factors, including the relative amount of the buffer in the MALDI matrix, as well as the identity of the specific buffer. Furthermore, the rate at which buffer tolerance decreases as buffer concentration is increased varies from buffer to buffer. The current results reveal that, at very high matrix:analyte ratios, buffer tolerance of MALDI is dramatically greater than concluded in previous literature reports.     

Covariance mapping in matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

A novel method for acquisition and numerical analysis of matrix-assisted laser desorption/ionization (MALDI) time-of-flight mass spectral data is described. The digitized ion current transient from each consecutive laser shot is first acquired and stored independently. Subsequently, statistical correlation parameters between all stored transients are computed. We illustrate the uses of this event-by-event analysis method for studies of sample surface heterogeneity as well as for elucidating the mechanisms of ion formation in MALDI. Other potential applications of the method are also outlined.     

Characterization of bacterial lipooligosaccharides by delayed extraction matrix-assisted laser desorption ionization time-of-flight mass spectrometry

Matrix-assisted laser desorption ionization (MALDI) with a time-of-flight analyzer has been used to analyze bacterial lipooligosaccharides (LOS). Crude LOS preparations from pathogenic strains of Haemophilus influenzae and Haemophilus ducreyi and a commercial preparation of lipopolysaccharide from Salmonella typhimurium were treated with hydrazine to remove O-linked fatty acids on the lipid A moiety. The resulting O-deacylated LOS forms were water soluble and more amenable to cocrystallization with standard MALDI matrices such as 2,5-dihydroxybenzoic acid and 1-hydroxyisoquinoline. Under continuous extraction conditions, O-deacylated LOS yielded broad peaks with abundant salt adducts as well as forming prompt fragments through β-elimination of phosphoric acid, that is, [M-H₃PO₄-H]. However, when a time delay was used between ionization and extraction (“delayed extraction”) a significant improvement was seen in both mass resolution and the stability of the molecular ions against β-elimination of phosphoric acid, especially in the negative-ion mode. Both an external two-point calibration and an internal single-point calibration were used to assign masses, the latter of which provided the highest degree of accuracy (better than 0.01% in most cases). At higher laser powers, the LOS molecules cleave readily between the oligosaccharide and lipid A moieties yielding a number of prompt fragments. Postsource decay (PSD) analysis of selected molecular ions provided a set of fragments similar to those seen in the linear spectra, although they were more limited in number because they were derived from a single LOS-glycoform. Both the prompt and PSD fragments provided important structural information, especially in assigning the phosphate and phosphoethanolamine substitution pattern of the lipid A and oligosaccharide portions of LOS. Last, with the addition of ethylenediaminetetraacetic acid followed by pulsed sonication, the relatively insoluble (and impure) LOS preparations yielded MALDI spectra similar to the O-deacylated LOS, although these intact LOS preparations required higher laser powers to ionize and were generally more affected by competing impurities.     

Accurate mass measurement of low molecular weight compounds by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We report the application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for the accurate measurement of mass of low molecular weight compounds (smaller than 1500 Da), a linear peptide, two types of cyclic depsipeptides, a polyhydroxy-macrocyclic lactone, and two prenylated flavonoids, with delayed extraction in the reflector mode. The performance of the MALDI-TOF instrument was less than those of fast atom bombardment and Fourier-transform ion cyclotron resonance mass spectrometry instruments and insufficient to give acceptable accuracy for literature reporting. Nevertheless, when combined with NMR spectrometry and/or amino acid analysis to give information on the numbers of carbon atoms and index of hydrogen deficiency, MALDI was useful for determination of the elemental composition of the low molecular weight compounds available in small quantities.