MHD boundary layer flow of Casson fluid passing through an exponentially stretching permeable surface with thermal radiation

This article numerically examines the boundary layer flow due to an exponentially stretching surface in the presence of an applied magnetic field. Casson fluid model is used to characterize the non-Newtonian fluid behavior. The flow is subjected to suction/blowing at the surface. Analysis is carded out in presence of thermal radiation and prescribed surface heat flux. In this study, an exponential order stretching velocity and prescribed exponential order surface heat flux are accorded with each other. The governing partial differential equations are first converted into nonlinear ordinary differential equations by using appropriate transformations and then solved numerically. The effect of increasing values of the Casson parameter is to suppress the velocity field. However the temperature is enhanced when Casson parameter increases. It is found that the skin-friction coefficient increases with increasing values of suction parameter. Temperature also increases for large values of power index n in both suction and blowing cases at the boundary. It is observed that the thermal radiation enhances the effective thermal diffusivity and hence the temperature rises.     

Casson fluid flow: Free convective heat and mass transfer over an unsteady permeable stretching surface considering viscous dissipation

The present study investigates a Casson fluid flow in the presence of free convection of combined heat and mass transfer toward an unsteady permeable stretching sheet with thermal radiation, viscous dissipation and chemical reaction. The governing partial differential equations are reduced to a system of nonlinear ordinary differential equations and then solved by an efficient Runge–Kutta–Fehlberg method. The dimensionless velocity is decreased by increasing values of the chemical reaction and magnetic parameter while fluid temperature is significantly reduced by increasing values of the Prandtl number. The heat transfer rate is reduced with increasing values of thermal radiation and magnetic parameters.     

Influences of Marangoni convection and variable magnetic field on hybrid nanofluid thin-film flow past a stretching surface

Investigations on thin-film flow play a vital role in the field of optoelectronics and magnetic devices. Thin films are reasonably hard and thermally stable but quite fragile. The thermal stability of a thin film can be further improved by incorporating the effects of nanoparticles. In the current work, a stretchable surface is considered upon which hybrid nanofluid thin-film flow is taken into account. The idea of augmenting heat transmission by making use of a hybrid nanofluid is a focus of the current work. The flow is affected by variations in the viscous forces, along with viscous dissipation effects and Marangoni convection. A time-constrained magnetic field is applied in the normal direction to the flow system. The equations governing the flow system are shifted to a non-dimensional form by applying similarity variables. The homotopy analysis method is employed to find the solution to the resultant equations. It is noticed in this study that the flow characteristics decline with augmentation of magnetic, viscosity and unsteadiness parameters while they increase with enhanced values of thin-film parameters. Thermal characteristics are supported by increasing values of the Eckert number and the unsteadiness parameter and opposed by the viscosity parameter and Prandtl number. The numerical impact of different emerging parameters upon skin friction and the Nusselt number is calculated in tabular form. A comparison of current work with established results is carried out, with good agreement.     

Partial slip effect on non-aligned stagnation point nanofluid over a stretching convective surface

The present study inspects the non-aligned stagnation point nano fluid over a convective surface in the presence of partial slip.Two types of base fluids namely water and kerosene are selected with Cu nanoparticles.The governing physical problem is presented and transformed into a system of coupled nonlinear differential equations using suitable similarity transformations.These equations are then solved numerically using midpoint integration scheme along with Richardson extrapolation via Maple.Impact of relevant physical parameters on the dimensionless velocity and temperature profiles are portrayed through graphs.Physical quantities such as local skin frictions co-efficient and Nusselt numbers are tabularized.It is detected from numerical computations that kerosene-based nano fluids have better heat transfer capability compared with water-based nanofluids.Moreover it is found that water-based nanofluids offer less resistance in terms of skin friction than kerosene-based fluid.In order to authenticate our present study,the calculated results are compared with the prevailing literature and a considerable agreement is perceived for the limiting case.     

Effects of thermal stratification on transient free convective flow of a nanofluid past a vertical plate

An analysis of thermal stratification in a transient free convection of nanofluids past an isothermal vertical plate is performed. Nanofluids containing nanoparticles of aluminium oxide, copper, titanium oxide and silver having volume fraction of the nanoparticles less than or equal to 0.04 with water as the base fluid are considered. The governing boundary layer equations are solved numerically. Thermal stratification effects and volume fraction of the nanoparticles on the velocity and temperature are represented graphically. It is observed that an increase in the thermal stratification parameter decreases the velocity and temperature profiles of nanofluids. An increase in the volume fraction of the nanoparticles enhances the temperature and reduces the velocity of nanofluids. Also, the influence of thermal stratification parameter and the volume fraction of the nanoparticles of local as well as average skin friction and the rate of heat transfer of nanofluids are discussed and represented graphically. The results are found to be in good agreement with the existing results in literature.     

Hybrid nanofluid flow induced by an exponentially shrinking sheet

The flow and heat transfer induced by an exponentially shrinking sheet with hybrid nanoparticles is investigated in this paper. The alumina (Al₂O₃) and copper (Cu) nanoparticles are suspended in water to form Al₂O₃–Cu/water hybrid nanofluid. In addition, the effects of magnetohydrodynamic (MHD) and radiation are also taken into account. The similarity equations are gained from the governing equations using similarity transformation, and their solutions are obtained by the aid of the bvp4c solver available in Matlab software. Results elucidate that dual solutions exist for suction strength S > S_c and shrinking strength λ > λ_c. The critical values S_c and λ_c for the existence of the dual solutions decrease with the rising of the solid volume fractions of Cu, φ₂ and the magnetic parameter, M. Besides, the skin friction and the heat transfer rate increase with the increasing of φ₂ and M for the upper branch solutions. The increasing of radiation, R leads to reduce the surface temperature gradient which implies to the reduction of the heat transfer rate for both branches when λ < 0 (shrinking sheet). The stability of the dual solutions is determined by the temporal stability analysis, and it is discovered that only one of them is stable and physically applicable.     

MHD flow of nanofluids over an exponentially stretching sheet in a porous medium with convective boundary conditions

This article concentrates on the steady magnetohydrodynamic(MHD) flow of viscous nanofluid. The flow is caused by a permeable exponentially stretching surface. An incompressible fluid fills the porous space. A comparative study is made for the nanoparticles namely Copper(Cu), Silver(Ag), Alumina(Al2O3) and Titanium Oxide(TiO2). Water is treated as a base fluid. Convective type boundary conditions are employed in modeling the heat transfer process. The non-linear partial differential equations governing the flow are reduced to an ordinary differential equation by similarity transformations. The obtained equations are then solved for the development of series solutions. Convergence of the obtained series solutions is explicitly discussed. The effects of different parameters on the velocity and temperature profiles are shown and analyzed through graphs.     

Flow and heat transfer of a hybrid nanofluid past a permeable moving surface

A steady flow and heat transfer of a hybrid nanofluid past a permeable moving surface is investigated. In this study, 0.1 solid volume fraction of alumina (Al₂O₃) is fixed, then consequently, various solid volume fractions of copper (Cu) are added into the mixture with water as the base fluid to form Cu-Al₂O₃/water hybrid nanofluid. The similarity equations are obtained by converting the governing equations of the hybrid nanofluid using the technique of similarity transformation. The bvp4c function available in Matlab software is used to solve the similarity equations numerically. The numerical results are obtained for selected parameters and discussed in detail. It is found that hybrid nanofluid enhances the heat transfer rate compared to the regular nanofluid. The results show that two solutions exist up to a certain value of the moving parameter and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions increase. The temporal stability analysis is conducted in determining the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.     

MHD mixed convection stagnation point flow of a hybrid nanofluid past a vertical flat plate with convective boundary condition

The steady magnetohydrodynamics (MHD) mixed convection stagnation point flow of a hybrid nanofluid past a vertical flat plate with convective boundary condition is investigated in this study. By choosing appropriate similarity variables, the partial differential equations are transformed into a system of linear equations which are solved afterwards by using the boundary value problem solver, namely bvp4c in Matlab software. The solutions of the ordinary differential equations are proven to have two branches which are upper and lower solutions in a certain range of the mixed convection parameter. This leads to the execution of a stability analysis that verifies the achievable solution of the upper branch which is considered stable while the lower branch is unstable. The findings exposed that the fluid velocity increases with the increasing value of the magnetic parameter while the fluid temperature is decreased contradictory.     

Magnetohydrodynamics (MHD) axisymmetric flow and heat transfer of a hybrid nanofluid past a radially permeable stretching/shrinking sheet with Joule heating

The main interest of the present work is to fundamentally investigate the flow characteristics and heat transfer of a hybrid Cu-Al₂O₃/water nanofluid due to a radially stretching/shrinking surface with the mutual effects of MHD, suction and Joule heating. The surface is permeable to physically allow the wall mass fluid suction. Tiwari and Das model of nanofluid is used with the new thermophysical properties of hybrid nanofluid to represent the problem. A similarity transformation is adopted to convert the governing model (PDEs) into a nonlinear set of ordinary differential equations (ODEs). A bvp4c solver in MATLAB software is employed to numerically compute the transformed system. The numerical results are discussed and graphically manifested in velocity and temperature profiles, as well as the skin friction coefficient and heat transfer rate with the pertinent values of the dimensionless parameters namely magnetic, Cu volume fraction, suction and Eckert number. The Eckert number has no impact on the boundary layer separation while the higher value of the suction parameter may affect the heat transfer performance. The presence of dual solutions (first and second) is seen on all the profiles within a limited range of the physical parameters. The stability analysis is executed, and it is validated that the first solution is the real solution.     

Non-similar mixed convection analysis for magnetic flow of second-grade nanofluid over a vertically stretching sheet

The aspiration of this research is to explore the impact of non-similar modeling for mixed convection in magnetized second-grade nanofluid flow. The flow is initiated by the stretching of a sheet at an exponential rate in the upward vertical direction. The buoyancy effects in terms of temperature and concentration differences are inserted in the $x$-momentum equation. The aspects of heat and mass transfer are studied using dimensionless thermophoresis, Schmidt and Brownian motion parameters. The governing coupled partial differential system (PDEs) is remodeled into coupled non-similar nonlinear PDEs by introducing non-similar transformations. The numerical analysis for the dimensionless non-similar partial differential system is performed using a local non-similarity method via bvp4c. Finally, the quantitative effects of emerging dimensionless quantities on the non-dimensional velocity, temperature and mass concentration in the boundary layer are conferred graphically, and inferences are drawn that important quantities of interest are substantially affected by these parameters. It is concluded that non-similar modeling, in contrast to similar models, is more general and more accurate in convection studies in the presence of buoyancy effects for second-grade non-Newtonian fluids.     

Entropy analysis on unsteady MHD biviscosity nanofluid flow with convective heat transfer in a permeable radiative stretchable rotating disk

We examine the entropy analysis in three-dimensional hydromagnetic flow and convective heat transport of a biviscosity nanofluid over a rotating porous disk with a time-dependent stretching rate in the direction of the radius of the circular disk. We also examine the influence of thermal radiation and viscous dissipation due to nanoparticles and applied magnetic field. We invoked suitable self-similar transformations to covert the modeled coupled nonlinear PDEs into a set of nonlinear ODEs. The transformed system of equations is then worked out numerically by a well-known shooting technique and the fourth-order Runge–Kutta–Fehlberge method. The rotating phenomenon yields an additional parameter known as a rotation parameter, which controls the disk’s rotation. The study shows that the fluid motion is accelerated along the radial and cross-radial directions with an increase in the rotation of the disk. The skin-friction and the heat transfer rate at the disk strongly depend on the rotation of the disk, permeability of the porous medium, thermal radiation, and nanoparticle size. The Bejan number quantifies the entropy production of the system. It has a considerable impact on the magnetic field, rotation of the disk, thermal radiation, and Biot number. The efficient performance of the system is possible by a suitable choice of the physical parameters discussed in this article.     

Induced magnetic field stagnation point flow of nanofluid past convectively heated stretching sheet with Buoyancy effects

This paper presents the buoyancy effects on the magneto-hydrodynamics stagnation point flow of an incompressible,viscous,and electrically conducting nanofluid over a vertically stretching sheet.The impacts of an induced magnetic field and viscous dissipation are taken into account.Both assisting and opposing flows are considered.The overseeing nonlinear partial differential equations with the associated boundary conditions are reduced to an arrangement of coupled nonlinear ordinary differential equations utilizing similarity transformations and are then illuminated analytically by using the optimal homotopy investigation strategy(OHAM).Graphs are introduced and examined for different parameters of the velocity,temperature,and concentration profile.Additionally,numerical estimations of the skin friction,local Nusselt number,and local Sherwood number are explored using numerical values.     

Boundary layer flow and heat transfer of a nanofluid over a permeable unsteady stretching sheet with viscous dissipation

A numerical study of the boundary layer flow past unsteady stretching surface in nanofluid under the effects of suction and viscous dissipation is investigated. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. A similarity solution is presented, which depends on the unsteadiness parameter A, Eckert number Ec, ζ suction or injection parameter, Prandtl number Pr, Lewis number Le, Brownian motion number Nb, and thermophoresis number Nt. The governing partial differential equations were converted to nonlinear ordinary differential equations by using a suitable similarity transformation, which are solved numerically using the Nactsheim-Swigert shooting technique together with Runge-Kutta six-order iteration scheme. The accuracy of the numerical method is tested by performing various comparisons with the previously published work, and the results are found to be in excellent agreement. Numerical results are presented both in tabular and graphical forms illustrating the effects of these parameters on thermal and nanoparticle volume fraction boundary layers. The thermal boundary layer thickens with a rise in the local temperature as the Brownianmotion, thermophoresis, and convective heating each intensify.     

MHD mixed convection flow near the stagnation-point on a vertical permeable surface

The steady magnetohydrodynamic (MHD) mixed convection boundary layer flow of a viscous and electrically conducting fluid near the stagnation-point on a vertical permeable surface is investigated in this study. The velocity of the external flow and the temperature of the plate surface are assumed to vary linearly with the distance from the stagnation-point. The governing partial differential equations are first transformed into ordinary differential equations, before being solved numerically by a finite-difference method. The features of the flow and heat transfer characteristics for different values of the governing parameters are analyzed and discussed. Both assisting and opposing flows are considered. It is found that dual solutions exist for both cases, and the range of the mixed convection parameter for which the solution exists increases with suction.     

Effects of partial slip on axisymmetric flow of an electrically conducting viscoelastic fluid past a stretching sheet

The entrained flow of an electrically conducting non-Newtonian, viscoelastic second grade fluid due to an axisymmetric stretching surface with partial slip is considered. The partial slip is controlled by a dimensionless slip factor, which varies between zero (total adhesion) and infinity (full slip). Suitable similarity transformations are used to reduce the resulting highly nonlinear partial differential equation into an ordinary differential equation. The issue of paucity of boundary conditions is addressed, and an effective numerical scheme has been adopted to solve the obtained differential equation even without augmenting the boundary conditions. The important findings in this communication are the combined effects of the partial slip, magnetic interaction parameter and the second grade fluid parameter on the velocity and skin friction coefficient. It is observed that in presence of slip, the velocity decreases with an increase in the magnetic parameter. That is, the Lorentz force which opposes the flow leads to enhanced deceleration of the flow. Moreover, it is interesting to find that as slip increases in magnitude, permitting more fluid to slip past the sheet, the skin friction coefficient decreases in magnitude and approaches zero for higher values of the slip parameter, i.e., the fluid behaves as though it were inviscid.