Improved Initial Charging Capacity of Na-poor Na0.44MnO2 via Chemical Presodiation Strategy for Low-cost Sodium-ion Batteries

Sodium-ion batteries(SIBs)are promising for grid-scale energy storage applications due to the natural abundance and low cost of sodium.Among various Na insertion cathode materials,Na0.44MnO2 has attracted the most attention because of its cost effectiveness and structural stability.However,the low initial charge capacity for Na-poor Na0.44MnO2 hinders its practical applications.Herein,we developed a facile chemical presodiated method using sodiated biphenly to transform Na-poor Na0.44MnO2 into Na-rich Na0.66MnO2.After presodiation,the initial charge capacity of Na0.44MnO2 is greatly enhanced from 56.5 mA·h/g to 115.7 mA·h/g at 0.1 C(1 C=121 mA/g)and the excellent cycling stability(the capacity retention of 94.1%over 200 cycles at 2 C)is achieved.This presodiation strategy would open a new avenue for promoting the practical applications of Na-poor cathode materials in sodium-ion batteries.     

Ascorbic Acid‐Assisted Synthesis of Mesoporous Sodium Vanadium Phosphate Nanoparticles with Highly sp2‐Coordinated Carbon Coatings as Efficient Cathode Materials for Rechargeable Sodium‐Ion Batteries

Herein, mesoporous sodium vanadium phosphate nanoparticles with highly sp²‐coordinated carbon coatings (meso‐Na₃V₂(PO₄)₃/C) were successfully synthesized as efficient cathode material for rechargeable sodium‐ion batteries by using ascorbic acid as both the reductant and carbon source, followed by calcination at 750 °C in an argon atmosphere. Their crystalline structure, morphology, surface area, chemical composition, carbon nature and amount were systematically explored. Following electrochemical measurements, the resultant meso‐Na₃V₂(PO₄)₃/C not only delivered good reversible capacity (98 mAh g^?1 at 0.1 A g^?1) and superior rate capability (63 mAh g^?1 at 1 A g^?1) but also exhibited comparable cycling performance (capacity retention: ≈74 % at 450 cycles at 0.4 A g^?1). Moreover, the symmetrical sodium‐ion full cell with excellent reversibility and cycling stability was also achieved (capacity retention: 92.2 % at 0.1 A g^?1 with 99.5 % coulombic efficiency after 100 cycles). These attributes are ascribed to the distinctive mesostructure for facile sodium‐ion insertion/extraction and their continuous sp²‐coordinated carbon coatings, which facilitate electronic conduction.     

Phosphorus-Doping-Induced Surface Vacancies of 3D Na2Ti3O7 Nanowire Arrays Enabling High-Rate and Long-Life Sodium Storage

Sodium-ion batteries have attracted interest as an alternative to lithium-ion batteries because of the abundance and cost effectiveness of sodium. However, suitable anode materials with high-rate and stable cycling performance are still needed to promote their practical application. Herein, three-dimensional Na₂Ti₃O₇ nanowire arrays with enriched surface vacancies endowed by phosphorus doping are reported. As anodes for sodium-ion batteries, they deliver a high specific capacity of 290 mA h g⁻¹at 0.2 C, good rate capability (50 mA h g⁻¹at 20 C), and stable cycling capability (98 % capacity retention over 3100 cycles at 20 C). The superior electrochemical performance is attributed to the synergistic effects of the nanowire arrays and phosphorus doping. The rational structure can provide convenient channels to facilitate ion/electron transport and improve the capacitive contributions. Moreover, the phosphorus-doping-induced surface vacancies not only provide more active sites but also improve the intrinsic electrical conductivity of Na₂Ti₃O₇, which will enable electrode materials with excellent sodium storage performance. This work may provide an effective strategy for the synthesis of other anode materials with fast electrochemical reaction kinetics and good sodium storage performance.     

Improving Na+ transport kinetics and Na+ storage of hierarchical rhenium-nickel sulfide (ReS2@NiS2) hollow architecture by assembling layered 2D-3D heterostructures

Mixed metal sulfides have been widely used as anode material of sodium-ion batteries (SIBs) because of their excellent conductivity and sodium ion storage performance. Herein, ReS₂@NiS₂ heterostructures have been triumphantly designed and prepared through anchoring ReS₂ nanosheet arrays on the surface of NiS₂ hollow nanosphere. Specifically, the carbon nanospheres was used as hard template to synthesize NiS₂ hollow spheres as the substrate and then the ultrathin two-dimensional ReS₂ nanosheet arrays were uniformly grown on the surface of NiS₂. The internal hollow property provides sufficient space to relieve the volume expansion, and the outer two-dimensional nanosheet realizes the rapid electron transport and insertion/extraction of Na⁺. Owing to the great improvement of the transport kinetics of Na⁺, NiS₂@ReS₂ heterostructure electrode can achieve a high specific capacity of 400 mAh/g at the high current density of 1 A/g and still maintain a stable cycle stability even after 220 cycles. This hard template method not only paves a new way for the design and construct binary metal sulfide heterostructure electrode materials with outstanding electrochemical performance for Na⁺ batteries but also open up the potential applications of anode materials of SIBs.     

Sn Anodes Protected by Intermetallic FeSn2 Layers for Long-lifespan Sodium-ion Batteries with High Initial Coulombic Efficiency of 93.8 %

With a theoretical capacity of 847 mAh g⁻¹, Sn has emerged as promising anode material for sodium-ion batteries (SIBs). However, enormous volume expansion and agglomeration of nano Sn lead to low Coulombic efficiency and poor cycling stability. Herein, an intermetallic FeSn₂ layer is designed via thermal reduction of polymer-Fe₂O₃ coated hollow SnO₂ spheres to construct a yolk-shell structured Sn/FeSn₂@C. The FeSn₂ layer can relieve internal stress, avoid the agglomeration of Sn to accelerate the Na⁺ transport, and enable fast electronic conduction, which endows quick electrochemical dynamics and long-term stability. As a result, the Sn/FeSn₂@C anode exhibits high initial Coulombic efficiency (ICE=93.8 %) and a high reversible capacity of 409 mAh g⁻¹ at 1 A g⁻¹ after 1500 cycles, corresponding to an 80 % capacity retention. In addition, NVP//Sn/FeSn₂@C sodium-ion full cell shows outstanding cycle stability (capacity retaining rate of 89.7 % after 200 cycles at 1 C).     

Synthesis and electrode performance of carbon coated Na2FePO4F for rechargeable Na batteries

Carbon-coated Na₂FePO₄F is synthesized by a simple solid-state method with ascorbic acid as carbon source. Structural characterization of Na₂FePO₄F by synchrotron X-ray diffraction, scanning/transmission electron microscopy, and Raman spectroscopy reveals that ascorbic acid effectively suppresses the particle growth of Na₂FePO₄F, forming the nano-sized carbon coated materials. Electrode performance of Na₂FePO₄F for rechargeable sodium batteries is also examined. The carbon-coated Na₂FePO₄F sample (1.3 wt% carbon) delivers initial discharge capacity of 110 mAh g^-1 at a rate of 1/20 C (6.2 mA g^-1) with well-defined voltage plateaus at 3.06 and 2.91 V vs. Na metal. The sample also shows acceptable capacity retention and rate capability as the positive electrode materials for rechargeable Na batteries, which is operable at room temperature.     

Single-Ion Conducting Polymer Electrolyte for Superior Sodium-Metal Batteries

Sodium-metal batteries (SMBs) are considered a potential alternative to high-energy lithium-metal batteries (LMBs). However, the high reactivity of metallic sodium towards common liquid organic electrolytes renders such battery technology particularly challenging. Herein, we propose a multi-block single-ion conducting polymer electrolyte (SIPE) doped with ethylene carbonate as suitable electrolyte system for SMBs. This novel SIPE provides a very high ionic conductivity (2.6 mS cm⁻¹) and an electrochemical stability window of about 4.1 V at 40 °C, enabling stable sodium stripping and plating and excellent rate capability of Na||Na₃V₂(PO₄)₃ cells up to 2 C. Remarkably, such cells provide a capacity retention of about 85 % after 1,000 cycles at 0.2 C thanks to the very high Coulombic efficiency (99.9 %), resulting from an excellent interfacial stability towards sodium metal and the Na₃V₂(PO₄)₃ cathode.     

Carbon black: a promising electrode material for sodium-ion batteries

The reactions of sodium with non-porous carbon blacks have been studied. These materials show a high reversible capacity in sodium-ion batteries. The presence of disordered layers and the low density of the carbon black materials favor the reversibility of the process. A maximum amount of 0.0155 mole of sodium by cm³ of carbon is achieved. The performance of a sodium-ion cell using Na_0.7CoO₂ as the positive electrode and carbon black as the negative is described.     

Layer-Structured Ti Doped O3-Na1-xCr1-xTixO2(x=0, 0.03, 0.05) with Excellent Electrochemical Performance as Cathode Materials for Sodium Ion Batteries

Layer-structured O3 type cathode materials Na_1-xCr_1-xTi_xO₂(x=0, 0.03, 0.05) are fabricated by a thermo-polymerization method. The structures and morphologies are characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) respectively. It has been found that the appropriate Ti doping effectively leads to the formation of uniform morphology. As a cathode, the x=0.03 sample delivers a quite high discharge capacity of 110 mAh/g at 32 C in the voltage range from 2.0 V to 3.6 V (vs. Na/Na⁺) and with a capacity retention of 96% after 100 cycles at 0.2 C. The Na//Na_0.97Cr_0.97Ti_0.03O₂ cell exhibits very high coulombic e ciency (above 96%). All these results suggest that Na_0.97Cr_0.97Ti_0.03O₂ is very promising for high-rate sodium ion batteries.     

Designing Solvated Double-Layer Polymer Electrolytes with Molecular Interactions Mediated Stable Interfaces for Sodium Ion Batteries

Unstable cathode-electrolyte and/or anode-electrolyte interface in polymer-based sodium-ion batteries (SIBs) will deteriorate their cycle performance. Herein, a unique solvated double-layer quasi-solid polymer electrolyte (SDL-QSPE) with high Na⁺ ion conductivity is designed to simultaneously improve stability on both cathode and anode sides. Different functional fillers are solvated with plasticizers to improve Na⁺ conductivity and thermal stability. The SDL-QSPE is laminated by cathode- and anode-facing polymer electrolyte to meet the independent interfacial requirements of the two electrodes. The interfacial evolution is elucidated by theoretical calculations and 3D X-ray microtomography analysis. The Na_0.67Mn_2/3Ni_1/3O₂|SDL-QSPE|Na batteries exhibit 80.4 mAh g⁻¹ after 400 cycles at 1 C with the Coulombic efficiency close to 100 %, which significantly outperforms those batteries using the monolayer-structured QSPE.     

Fabricating multi-porous carbon anode with remarkable initial coulombic efficiency and enhanced rate capability for sodium-ion batteries

Due to the abundant sodium reserves and high safety, sodium ion batteries (SIBs) are foreseen a promising future. While, hard carbon materials are very suitable for the anode of SIBs owing to their structure and cost advantages. However, the unsatisfactory initial coulombic efficiency (ICE) is one of the crucial blemishes of hard carbon materials and the slow sodium storage kinetics also hinders their wide application. Herein, with spherical nano SiO₂ as pore-forming agent, gelatin and polytetrafluoroethylene as carbon sources, a multi-porous carbon (MPC) material can be easily obtained via a co-pyrolysis method, by which carbonization and template removal can be achieved synchronously without the assistance of strong acids or strong bases. As a result, the MPC anode exhibited remarkable ICE of 83% and a high rate capability (208 mAh/g at 5 A/g) when used in sodium-ion half cells. Additionally, coupling with Na₃V₂(PO₄)₃ as the cathode to assemble full cells, the as-fabricated MPC//NVP full cell delivered a good rate capability (146 mAh/g at 5 A/g) as well, implying a good application prospect the MPC anode has     

Na2FePO4F/Biocarbon Nanocomposite Hollow Microspheres Derived from Biological Cell Template as High-Performance Cathode Material for Sodium-Ion Batteries

We have successfully synthesized Na₂FePO₄F/biocarbon nanocomposite hollow microspheres from Fe^III precursor as cathodes for sodium-ion batteries through self-assembly of yeast cell biotemplate and sol-gel technology. The carbon coating on the nanoparticle surface with a mesoporous structure enhances electron diffusion into Na₂FePO₄F crystal particles. The improved electrochemical performance of Na₂FePO₄F/biocarbon nanocomposites is attributed to the larger electrode−electrolyte contact area and more active sites for Na⁺ on the surface of hollow microspheres compared with those of Na₂FePO₄F/C. The Na₂FePO₄F/biocarbon nanocomposite exhibits a high initial discharge capacity of 114.3 mAh g⁻¹ at 0.1 C, long-cycle stability with a capacity retention of 74.3 % after 500 cycles at 5 C, and excellent rate capability (70.2 mAh g⁻¹ at 5 C) compared with Na₂FePO₄F/C. This novel nanocomposite hollow microsphere structure is suitable for improving the property of other cathode materials for high-power batteries.     

Gel Polymer Electrolytes with Talc as a Natural Mineral Filler and a Biodegradable Polymer Matrix in Sodium-Ion Batteries

A gel polymer electrolyte based on poly(vinyl alcohol) (PVA) is used in sodium-ion batteries (SIBs). The use of biodegradable and water-soluble polymer potentially reduces the negative environmental impact. The other components include sodium salt (NaPF₆), sulfolane (TMS) as a plasticizer and talc. For the first time, natural and abundant talc has been used as an inert filler in a gel polymer electrolyte. The best results were obtained for moderate amounts of filler (1 and 3 wt%). Then, an increase in the conductivity, transference numbers, and thermal stability of the membranes was observed. Moreover, the presence of talc had a positive effect on the cyclability of the hard carbon electrode. The discharge capacity after 50 cycles of HC|1 % T_TMS|Na and HC|3 % T_TMS|Na was 243 and 225 mAh g⁻¹, respectively. The use of talc in gel polymer electrolytes containing sodium ions improves the safety and efficiency of SIBs.     

Realizing Complete Solid-Solution Reaction in High Sodium Content P2-Type Cathode for High-Performance Sodium-Ion Batteries

P2-type layered oxides suffer from an ordered Na⁺/vacancy arrangement and P2→O2/OP4 phase transitions, leading them to exhibit multiple voltage plateaus upon Na⁺ extraction/insertion. The deficient sodium in the P2-type cathode easily induces the bad structural stability at deep desodiation states and limited reversible capacity during Na⁺ de/insertion. These drawbacks cause poor rate capability and fast capacity decay in most P2-type layered oxides. To address these challenges, a novel high sodium content (0.85) and plateau-free P2-type cathode-Na_0.85Li_0.12Ni_0.22Mn_0.66O₂ (P2-NLNMO) was developed. The complete solid-solution reaction over a wide voltage range ensures both fast Na⁺ mobility (10⁻¹¹ to 10⁻¹⁰ cm² s⁻¹) and small volume variation (1.7 %). The high sodium content P2-NLNMO exhibits a higher reversible capacity of 123.4 mA h g⁻¹, superior rate capability of 79.3 mA h g⁻¹ at 20 C, and 85.4 % capacity retention after 500 cycles at 5 C. The sufficient Na and complete solid-solution reaction are critical to realizing high-performance P2-type cathodes for sodium-ion batteries.     

Towards Highly Stable Storage of Sodium Ions: A Porous Na3V2(PO4)3/C Cathode Material for Sodium‐Ion Batteries

A porous Na₃V₂(PO₄)₃ cathode material coated uniformly with a layer of approximately 6 nm carbon has been synthesized by the sol–gel method combined with a freeze‐drying process. The special porous morphology and structure significantly increases the specific surface area of the material, which greatly enlarges the contact area between the electrode and electrolyte, and consequently supplies more active sites for sodium ions. When employed as a cathode material of sodium‐ion batteries, this porous Na₃V₂(PO₄)₃/C exhibits excellent rate performance and cycling stability; for instance, it shows quite a flat potential plateau at 3.4 V in the potential window of 2.7–4.0 V versus Na⁺/Na and delivers an initial capacity as high as 118.9 and 98.0 mA h g^?1 at current rates of 0.05 and 0.5 C, respectively, and after 50 cycles, a good capacity retention of 92.7 and 93.6 % are maintained. Moreover, even when the discharge current density is increased to 5 C (590 mA g^?1), an initial capacity of 97.6 mA h g^?1 can still be achieved, and an exciting capacity retention of 88.6 % is obtained after 100 cycles. The good cycle performance, excellent rate capability, and moreover, the low cost of Na₃V₂(PO₄)₃/C suggest that this material is a promising cathode for large‐scale sodium‐ion rechargeable batteries.     

Facile Synthesis of Ultra-Small Few-Layer Nanostructured MoSe2 Embedded on N,P Co-Doped Bio-Carbon for High-Performance Half/Full Sodium-Ion and Potassium-Ion Batteries

Sodium/potassium-ion batteries (SIBs/PIBs) arouse intensive interest on account of the natural abundance of sodium/potassium resources, the competitive cost and appropriate redox potential. Nevertheless, the huge challenge for SIBs/PIBs lies in the scarcity of an anode material with high capacity and stable structure, which are capable of accommodating large-size ions during cycling. Furthermore, using sustainable natural biomass to fabricate electrodes for energy storage applications is a hot topic. Herein, an ultra-small few-layer nanostructured MoSe₂ embedded on N, P co-doped bio-carbon is reported, which is synthesized by using chlorella as the adsorbent and precursor. As a consequence, the MoSe₂/NP-C-2 composite represents exceedingly impressive electrochemical performance for both sodium-ion batteries (SIBs) and potassium-ion batteries (PIBs). It displays a promising reversible capacity (523 mAh g⁻¹ at 100 mA g⁻¹ after 100 cycles) and impressive long-term cycling performance (192 mAh g⁻¹ at 5 A g⁻¹ even after 1000 cycles) in SIBs, which are some of the best properties of MoSe₂-based anode materials for SIBs to date. To further probe the great potential applications, full SIBs pairing the MoSe₂/NP-C-2 composite anode with a Na₃V₂(PO₄)₃ cathode also exhibits a satisfactory capacity of 215 mAh g⁻¹ at 500 mA g⁻¹ after 100 cycles. Moreover, it also delivers a decent reversible capacity of 131 mAh g⁻¹ at 1 A g⁻¹ even after 250 cycles for PIBs.     

Nanowire of WP as a High-Performance Anode Material for Sodium-Ion Batteries

The design and development of electrode materials with high specific capacity and long cycling life for sodium-ion batteries (SIBs) is still a critical challenge. In this communication, we report the development of tungsten phosphide (WP) nanowire on carbon cloth (WP/CC) as an anode for SIBs. The WP/CC exhibits superior sodium storage capability with 502 mA h g⁻¹ at 0.1 A g⁻¹. Moreover, this anode is capable of delivering a long lifespan at 2 A g⁻¹ with an excellent capacity retention of 99 % after 1000 cycles.     

高比能钠离子电池预钠化技术研究进展

钠离子电池有望取代锂离子电池实现大规模储能应用。然而,储钠负极材料具有较低的初始库伦效率,制约了高比能钠离子电池的开发。预钠化技术被认为是补偿负极活性钠损失、提升电池能量密度的最直接有效的方法,对于钠离子电池的商业化应用具有重要意义。本文全面总结近年来预钠化技术的最新研究进展,包括短接法预钠化、电化学预钠化、钠金属物理预钠化、化学预钠化和正极补钠添加剂等,并从反应原理、安全性、可操作性、处理效率和可放大性等角度分析讨论现有各技术方案的优势及面临的挑战;着重介绍化学预钠化和正极补钠添加剂,这两类最具应用前景的预钠化技术的最新成果,进而从实用化角度深入探讨仍待解决的科学问题和技术难点。本文可为预钠化技术的进一步优化和高比能钠离子电池的开发提供思路。     

An Ultrastable Anode for Long‐Life Room‐Temperature Sodium‐Ion Batteries

Sodium‐ion batteries are important alternative energy storage devices that have recently come again into focus for the development of large‐scale energy storage devices because sodium is an abundant and low‐cost material. However, the development of electrode materials with long‐term stability has remained a great challenge. A novel negative‐electrode material, a P2‐type layered oxide with the chemical composition Na_2/3Co_1/3Ti_2/3O₂, exhibits outstanding cycle stability (ca. 84.84 % capacity retention for 3000 cycles, very small decrease in the volume (0.046 %) after 500 cycles), good rate capability (ca. 41 % capacity retention at a discharge/charge rate of 10 C), and a usable reversible capacity of about 90 mAh g^?1 with a safe average storage voltage of approximately 0.7 V in the sodium half‐cell. This P2‐type layered oxide is a promising anode material for sodium‐ion batteries with a long cycle life and should greatly promote the development of room‐temperature sodium‐ion batteries.     

NiSe2 nanoparticles encapsulated in CNTs covered and N-doped TiN/carbon nanofibers as a binder-free anode for advanced sodium-ion batteries

Metal selenides are promising anodes for sodium-ion batteries (SIBs) due to the high theoretical capacity through conversion reaction mechanism. However, developing metal selenides with superior electrochemical sodium-ion storage performance is still a great challenge. In this work, a novel composite material of free-standing NiSe₂ nanoparticles encapsulated in N-doped TiN/carbon composite nanofibers with carbon nanotubes (CNTs) in-situ grown on the surface (NiSe₂@N-TCF/CNTs) is prepared by electrospinning and pyrolysis technique. In this composite materials, NiSe₂ nanoparticles on the surface of carbon nanofibers were encapsulated into CNTs, thus avoiding aggregation. The in-situ grown CNTs not only improve the conductivity but also act as a buffer to accommodate the volume expansion. TiN inside the nanofibers further enhances the conductivity and structural stability of carbon-based nanofibers. When directly used as anode for SIBs, the NiSe₂@N-TCF/CNT electrode delivered a reversible capacity of 392.1 mAh/g after 1000 cycles and still maintained 334.4 mAh/g even at a high rate of 2 A/g. The excellent sodium-ion storage performance can be attributed to the fast Na⁺ diffusion and transfer rate and the pseudocapacitance dominated charge storage mechanism, as is evidenced by kinetic analysis. The work provides a novel approach to the fabrication of high-performance anode materials for other batteries.