Combined slit and plate–plate magnetorheometry of a magnetorheological fluid (MRF) and parameterization using the Casson model

We describe a magneto-slit die of 0.34 mm height and 4.25 mm width attached to a commercial piston capillary rheometer, enabling the measurement of apparent flow curves of a magnetorheological fluid (MRF) in the high shear rate regime (apparent shear rates 276 up to 20,700 s^???1, magnetic flux density up to 300 mT). The pressure gradient in the magnetized slit is measured via two pressure holes. While the flux density versus coil current without MRF could directly be measured by means of a Hall probe, the flux density with MRF was investigated by finite element simulations using Maxwell® 2D. The true shear stress versus shear rate is obtained by means of the Weissenberg–Rabinowitsch correction. The slit die results are compared to plate–plate measurements performed in a shear rate regime of 0.46 up to 210 s^???1. It is shown that the Casson model yields a pertinent fit of the true shear stress versus shear rate data from plate–plate geometry. Finally, a joint fit of the slit and plate–plate data covering a shear rate range of 1 up to 50,000 s^???1 is presented, again using the Casson model. The parameterization of the MRF behavior over the full shear rate regime investigated is of relevance for the design of MR devices, like, e.g., automotive dampers. In the Appendix, we demonstrate the drawbacks of the Bingham model in describing the same data. We also show the parameterization of the flow curves by applying the Herschel–Bulkley model.     

Computational analysis of the SARS-CoV-2 and other viruses based on the Kolmogorov’s complexity and Shannon’s information theories

Nonlinear Dynamics - This paper tackles the information of 133 RNA viruses available in public databases under the light of several mathematical and computational tools. First, the formal concepts...     

Finite element analysis of the piezocone test in cohesive soils using an elastoplastic–viscoplastic model and updated Lagrangian formulation

In this research, the finite element analysis of piezocone penetration has been conducted using the elastoplastic–viscoplastic bounding surface model in the updated Lagrangian reference frame. A finite element formulation has been performed considering the viscoplastic contribution of the model and the theory of mixtures has been incorporated to explain the behavior of the soil. The formulated model has been implemented into a finite element program, EPVPCS-S (elastoplastic–viscoplastic coupled system-soil), to analyze the mechanism of piezocone penetration. The results of the finite element analysis have been compared and investigated with the experimental results from the piezocone penetration and dissipation tests conducted using LSU/CALCHAS (Louisiana State University Calibration Chamber System).     

Radial basis functions collocation and a unified formulation for bending,vibration and buckling analysis of laminated plates,according to a variation of Murakami’s zig-zag theory

In this paper, we propose a variation of the use of Murakami’s zig-zag theory for the analysis of laminated plates. The new theory accounts for through-the-thickness deformation, by considering a quadratic evolution of the transverse displacement with the thickness coordinate. The equations of motion and the boundary conditions are obtained by the Carrera’s Unified Formulation, and further interpolated by collocation with radial basis functions. This paper considers the analysis of static deformations, free vibrations and buckling loads on laminated composite plates.