Influence of the Time Scale on the Reaction Mechanism of CO Oxidation over a Au/TiO2 Catalyst

Knowledge of the reaction mechanism is key for rational catalyst improvement. Traditionally mechanistic studies focus on structure and the reaction conditions like temperature, pH, pressure, etc., whereas the time dimension is often overlooked. Here, we demonstrate the influence of time on the mechanism of a catalytic reaction. A dual catalytic mechanism was identified for the CO oxidation over Au/TiO₂ by time-resolved infrared spectroscopy coupled with modulation excitation spectroscopy. During the first seconds, CO on the gold particles is the only reactive species. As the reaction proceeds, the redox properties of TiO₂ dominate the catalytic activity through electronic metal-support interaction (EMSI). CO induces the reduction and reconstruction of TiO₂ whereas oxygen leads to its oxidation. The activity of the catalyst follows the spectroscopic signature of the EMSI. These findings demonstrate the power of studying short-time kinetics for mechanistic studies.     

Single-Atom Rh on High-Index CeO2 Facet for Highly Enhanced Catalytic CO Oxidation

Reducible oxide-supported noble metal nanoparticles exhibit high activity in catalyzing many important oxidation reactions. However, atom migration under harsh reaction conditions leads to deactivation of the catalyst. Meanwhile, single-atom catalysts demonstrate enhanced stability, but often suffer from poor catalytic activity owing to the ionized surface states. In this work, we simultaneously address the poor activity and stability issues by synthesizing highly active and durable rhodium (Rh) single-atom catalysts through a “wrap-bake-peel” process. The pre-coated SiO₂ layer during synthesis of catalyst plays a crucial role in not only protecting CeO₂ support against sintering, but also donating electron to weaken the Ce−O bond, producing highly loaded Rh single atoms on the CeO₂ support exposed with high-index {210} facets. Benefiting from the unique electronic structure of CeO₂ {210} facets, more oxygen vacancies are generated along with the deposition of more electropositive Rh single atoms, leading to remarkably improved catalytic performance in CO oxidation.     

Boosting the Activity of Pd Single Atoms by Tuning Their Local Environment on Ceria for Methane Combustion

Supported Pd single atom catalysts (SACs) have triggered great research interest in methane combustion yet with contradicting views on their activity and stability. Here, we show that the Pd SAs can take different electronic structure and atomic geometry on ceria support, resulting in different catalytic properties. By a simple thermal pretreatment to ceria prior to Pd deposition, a unique anchoring site is created. The Pd SA, taking this site, can be activated to Pd^δ+ (0<δ<2) that has greatly enhanced activity for methane oxidation: T₅₀ lowered by up to 130 °C and almost 10 times higher turnover frequency compared to the untreated catalyst. The enhanced activity of Pd^δ+ site is related to its oxygen-deficient local structure and elongated interacting distance with ceria, leading to enhanced capability in delivering reactive oxygen species and decomposing reaction intermediates. This work provides insights into designing highly efficient Pd SACs for oxidation reactions.     

Stabilizing Low-Valence Single Atoms by Constructing Metalloid Tungsten Carbide Supports for Efficient Hydrogen Oxidation and Evolution

Designing novel single-atom catalysts (SACs) supports to modulate the electronic structure is crucial to optimize the catalytic activity, but rather challenging. Herein, a general strategy is proposed to utilize the metalloid properties of supports to trap and stabilize single-atoms with low-valence states. A series of single-atoms supported on the surface of tungsten carbide (M-WC_x, M=Ru, Ir, Pd) are rationally developed through a facile pyrolysis method. Benefiting from the metalloid properties of WC_x, the single-atoms exhibit weak coordination with surface W and C atoms, resulting in the formation of low-valence active centers similar to metals. The unique metal-metal interaction effectively stabilizes the low-valence single atoms on the WC_x surface and improves the electronic orbital energy level distribution of the active sites. As expected, the representative Ru-WC_x exhibits superior mass activities of 7.84 and 62.52 A mg_Ru⁻¹ for the hydrogen oxidation and evolution reactions (HOR/HER), respectively. In-depth mechanistic analysis demonstrates that an ideal dual-sites cooperative mechanism achieves a suitable adsorption balance of H_ad and OH_ad, resulting in an energetically favorable Volmer step. This work offers new guidance for the precise construction of highly active SACs.     

Controlling the Oxidation State of Pt Single Atoms for Maximizing Catalytic Activity

Single-atom catalysts (SACs) have emerged as promising materials in heterogeneous catalysis. Previous studies reported controversial results about the relative level in activity for SACs and nanoparticles (NPs). These works have focused on the effect of metal atom arrangement, without considering the oxidation state of the SACs. Here, we immobilized Pt single atoms on defective ceria and controlled the oxidation state of Pt SACs, from highly oxidized (Pt⁰: 16.6 at %) to highly metallic states (Pt⁰: 83.8 at %). The Pt SACs with controlled oxidation states were then employed for oxidation of CO, CH₄, or NO, and their activities compared with those of Pt NPs. The highly oxidized Pt SACs presented poorer activities than Pt NPs, whereas metallic Pt SACs showed higher activities. The Pt SAC reduced at 300 °C showed the highest activity for all the oxidations. The Pt SACs with controlled oxidation states revealed a crucial missing link between activity and SACs.     

Size-Dependent Dispersion of Rhodium Clusters into Isolated Single Atoms at Low Temperature and the Consequences for CO Oxidation Activity

Understanding the dynamic structural evolution of supported metal clusters under reaction conditions is crucial to develop structure reactivity relations. Here, we followed the structure of different size Rh clusters supported on Al₂O₃ using in situ/operando spectroscopy and ex situ aberration-corrected electron microscopy. We report a dynamic evolution of rhodium clusters into thermally stable isolated single atoms upon exposure to oxygen and during CO oxidation. Rh clusters partially disperse into single atoms at room temperature and the extent of dispersion increases as the Rh size decreases and as the reaction temperature increases. A strong correlation is found between the extent of dispersion and the CO oxidation kinetics. More importantly, dispersing Rh clusters into single atoms increases the activity at room temperature by more than two orders of magnitude due to the much lower activation energy on single atoms (40 vs. 130 kJ/mol). This work demonstrates that the structure and reactivity of small Rh clusters are very sensitive to the reaction environment.     

制备条件对Au/LaCoO_3催化氧化CO性能的影响

采用溶胶-凝胶法制备了钙钛矿型复合氧化物LaCoO_3, 并用沉积-沉淀法(DP法)制备了Au/LaCoO_3催化剂. 考察了制备条件对催化剂催化氧化CO活性的影响. 结果表明, 制备过程中, 溶液pH、 pH调节顺序及催化剂焙烧温度对催化剂活性均有一定影响. Au/LaCoO_3催化剂的最佳制备条件为: 沉积过程中在HAuCl4溶液中先加入载体后, 再调节溶液pH=8, 得到的催化剂经250 ℃焙烧后可提高催化剂稳定性.     

Potential Dominates Structural Recombination of Single Atom Mn Sites for Promoting Oxygen Reduction Reaction

Single atom sites (SAS) often undergo structural recombination in oxygen reduction reaction (ORR), while the effect of valence state and reconstruction on active centers needs to be investigated thoroughly. Herein, the Mn-SAS catalyst with uniform and precise Mn-N₄ configuration is rationally designed. We utilize operando synchrotron radiation to track the dynamic evolution of active centers during ORR. Under the applied potential, the structural evolution of Mn-N₄ into Mn-N₃C and further into Mn-N₂C₂ configurations is clarified. Simultaneously, the valence states of Mn are increased from +3.0 to +3.8 and then decreased to +3.2. When the potential is removed, the catalyst returned to its initial Mn^+3.0-N₄ configuration. Such successive evolutions optimize the electronic and geometric structures of active centers as evidenced by theory calculations. The evolved Mn^+3.8-N₃C and Mn^+3.2-N₂C₂ configurations respectively adjust the O₂ adsorption and reduce the energy barrier of rate-determining step. Thus, it can achieve an onset potential of 0.99 V, superior stability over 10,000 cycles, and a high turnover frequency of 1.59 s⁻¹ at 0.85 VRHE. Our present work provides new insights into the construction of well-defined SAS catalysts by regulating the valence states and configurations of active centers.     

In situ Observation of Porosity Formation in Porous Single-crystalline TiO2 Monolith for Enhanced and Stable Catalytic CO Oxidation

Introducing pores in single crystals creates a new type of porous materials that incorporate porosity and structural coherence. Herein, we use in situ transmission electron microscopy to disclose the porosity formation by converting KTiOPO₄ (KTP) single crystals into porous single-crystalline (PSC) TiO₂ monoliths in a solid-solid transformation. The isolated crystalline nuclei of TiO₂ clusters with identical lattice orientation on KTP surface moves TiO₂/KTP interface toward mother phase for growing PSC TiO₂ monoliths. The relative density in PSC TiO₂ monoliths dominates porosity while the macroscopic dimensions remain unchanged in the transformation. The single-crystalline nature of porous architecture stabilizes oxygen vacancy to activate lattice oxygen while the three-dimensional percolation enhances species diffusion. PSC TiO₂ monoliths with deposited Pt clusters show enhanced and stable catalytic CO oxidation in air at ∼75 °C for 200 hours of operation.     

自发氧化还原法制备Co3O4/CeO2纳米复合材料及其CO催化氧化反应结构优化

采用简单的自发氧化还原法合成了Co3O4/CeO2纳米复合材料,采用透射电子显微镜(TEM)\,X射线衍射(XRD)及X射线光电子能谱(XPS)等分析手段对样品进行了表征,并探究了反应参数对其催化CO氧化反应活性的影响.结果表明,Co/Ce摩尔比、pH值、反应温度和煅烧温度均显著影响Co3O4/CeO2纳米复合材料的催化性能;性能最优的样品用于催化CO氧化反应在140℃时即可实现100%的转化率,并且在循环测试中其催化活性保持不变,显示出良好的稳定性.     

Central Doping of a Foreign Atom into the Silver Cluster for Catalytic Conversion of CO2 toward C−C Bond Formation

Clusters with an exact number of atoms are of particular interest in catalysis. Their catalytic behaviors can be potentially altered with the addition or removal of a single atom. Now the effects of doping with a single foreign atom (Au, Pd, and Pt) into the core of an Ag cluster with 25 atoms on the catalytic properties are explored, where the foreign atom is protected by 24 Ag atoms (Au@Ag₂₄, Pd@Ag₂₄, and Pt@Ag₂₄). The central doping of a single atom into the Ag₂₅ cluster has a substantial influence on the catalytic performance in the carboxylation reaction of CO₂ with terminal alkyne through C?C bond formation to produce propiolic acid. These studies reveal that the catalytic properties of the cluster catalysts can be dramatically changed with the subtle alteration by a single atom away from the active sites.