快速溶剂萃取-在线净化-GCMS联用分析纺织品中10种芳香胺

利用在线净化-快速溶剂萃取结合气相色谱-质谱联用技术,建立了一种快速、高效的多种致癌芳香胺类成分的样品前处理及分析方法。纺织样品中的偶氮染料在萃取池内高温和高压条件下进行氧化-还原裂解反应,裂解芳香胺产物萃取后,经池内硅藻土填料实现在线净化。10种芳香胺类物质在0.5~90 mg/L的范围内与峰面积呈线性,检测限在1.2~4.6 mg/kg之间,快速溶剂萃取处理所得10种致癌芳香胺成分的回收率在82.6%~96.3%之间,RSD范围在1.8%~4.7%之间。     

Determination of primary aromatic amines in water food simulant using solid-phase analytical derivatization followed by gas chromatography coupled with mass spectrometry

Solid phase analytical derivatization with trifluoroacetic anhydride has been introduced as sample preparation for the determination of primary aromatic amines in water by gas chromatography coupled with mass spectrometry. Water was used as a food simulant for testing migration from laminated flexible food packaging materials. The method was evaluated for 8 primary aromatic amines in 200 ml water samples, which resulted in detection limits in the 0.1-0.4 microg/l range, relative standard deviations in the 4-17% range and acceptable linearity (R2 = 0.997-1.000). Detectable levels of 2,4-diaminotoluene, 2,6-diaminotoluene and 4,4'-methylenedianiline were found in water food simulant from some of the investigated food packaging materials.     

Electrochemical detection of aniline: an electrochemically initiated reaction pathway

The electrochemically initiated reaction of aromatic amines with catechol has been examined as a facile route to the electrochemical determination of the former. The effects of the different structural isomers of sulfanilic acid on the analytical system has been studied and appraised. The report illustrates how by varying oxidation times of the catechol species or by increasing the number of repetitive voltammetric scans from one to four the analytical parameters (linear range and limit of detection) can be improved. The results provide a linear detection range of 2-40 muM for aniline with a corresponding limit of detection of 1.4 muM. The efficacy of the approach has been shown by a 99.5% (RSD=5.5%, N=5) recovery of 2.47 muM spiked aniline in river water.     

A sweeping-micellar electrokinetic chromatography method for direct detection of some aromatic amines in water samples

A simple and rapid sweeping method for the online improvement of detection limit of some aromatic amines has been developed in this work. The optimum sweeping and separation conditions for 4-methylaniline, 3,4-dichloroaniline, 4-chloroaniline, and 4-aminophenyl were investigated in detail. Under the optimum conditions, the detection limits of these four aromatic amines ranged from 5.4 x 10(-10) to 4.6 x 10(-8)mol/L (S/N = 3), which was about 80-1090-folds lower than those of conventional sample injections. Linear response range were in the range of 2.5 x 10(-8)-2.0 x 10(-6)mol/L with the correlation coefficient between 0.9965 and 0.9994. Baseline separation was achieved within 10 min. After validation, the developed method was applied to determine 4-methylaniline, 3,4-dichloroaniline, 4-chloroaniline, and 4-aminophenyl in river water sample with average recoveries of 79.6-88.7%.     

Simultaneous determination of aliphatic and aromatic amines in water and sediment samples by ion-pair extraction and gas chromatography-mass spectrometry

A gas chromatography-mass spectrometry (GC-MS) method has been proposed for the determination of aliphatic and aromatic amines in a variety of environmental samples including wastewater, river water, sea water and sediment samples. The method includes ion-pair extraction with bis-2-ethylhexylphosphate (BEHPA), derivatisation of compounds with isobutyl chloroformate (IBCF) and their GC-MS analysis. Aliphatic and aromatic amines were isolated from aqueous samples using BEHPA as ion-pair reagent and derivatised with IBCF for their chromatographic analysis. Solid-liquid extraction of aliphatic and aromatic amines in sediment samples were performed in Soxhlet apparatus with acidic MeOH and ion-pair extraction with BEHPA were carried out for the isolation of amines followed by derivatisation with IBCF. Aliphatic and aromatic amines were then analysed with GC-MS in both electron impact (EI) and positive and negative ion chemical ionisation (PNICI) mode as their isobutyloxycarbonyl (isoBOC) derivatives. The obtained recoveries ranged from 81.0 to 98.0% and the precision of this method, as indicated by the relative standard deviations (RSDs) was within the range of 0.5 and 4.3%. The detection limits obtained from calculations by using GC-MS results based on S/N = 3 were within the range from 0.07 to 0.50 ng/l.     

Regioselectively N-methylated azacalix[8]arene octamethyl ether prepared by catalytic aryl amination reaction using a temporal N-silylation protocol

[Structure: see text] A temporal N-silylation protocol in the catalytic aryl amination reaction has been devised to prepare nitrogen-bridged calixarene analogues. The protocol involves a smooth in situ N-silylation before aryl amination reaction, followed by spontaneous cleavage of the N-Si bond in the usual workup process, to furnish secondary aromatic amines as the cross-coupled product with no silyl group on the nitrogen atom. A successful application to the preparation of regioselectively N-methylated azacalix[8]arene is described, together with the crystallographic analysis.     

Quantitative determination of 22 primary aromatic amines by cation-exchange solid-phase extraction and liquid chromatography–mass spectrometry

Primary aromatic amines (PAAs) have been broadly studied due to their high toxicity. In this work a method for the analysis of 22 PAAs in aqueous simulants has been developed. The method is based on a solid-phase extraction step using cation-exchange cartridges and the subsequent analysis of the extracts by ultra-high-performance liquid chromatography with mass spectrometric detection. The recoveries obtained for all the amines analyzed ranged between 81 and 109%, linear range was between 0.03 and 75 μg L⁻¹, with the RSD values between 4.5 and 13.4% and an average value of 7.5% and limits of detection at μg L⁻¹ level. The method has been applied to two real samples obtained from migration experiments of polyurethane based laminates to simulant B (water with 3% (w/v) acetic acid) which represents the worst case for the migration of aromatic amines. The main amines found in both samples were methylenedianiline isomers, obtained from the corresponding residual diisocyanates used during polyurethane adhesive polymerization. The total amine concentration found was 26 and 6.3 μg of aniline equivalents per kg of food simulant.     

Tandem regioselective synthesis of tetrazoles and related heterocycles using iodine

A one-pot, tandem process has been developed for the synthesis of a library of tetrazoles from aryl isothiocyanates. Condensation of aryl isothiocyanates with ammonia, and aryl amines (R-NH(2)) provided mono, 1,3-disubstituted symmetrical and unsymmetrical thioureas, which on desulfurization with molecular iodine (I(2)) led to formation of the corresponding heterocumulene (cyanamides or carbodiimides). The in situ generated heterocumulene on subsequent treatment with sodium azide at room temperature gave corresponding tetrazoles. The product regioselectivity for unsymmetrical 1,3-disubstituted thioureas was found to be correlated with the basicities (pK(a)'s) of the parent amines attached to the thiourea. Aryl-sec-alkyl unsymmetrical thioureas gave thioamido guanidino products rather than the 5-aminotetrazoles produced by HgCl(2) mediation of the reaction. Bis-thioureas derived from aryl isothiocyanates and hydrazine gave thiadiazoles exclusively.     

Fast separation and sensitive detection of carcinogenic aromatic amines by reversed-phase micro-liquid chromatography coupled with electrochemical detection

A micro-LC method was developed for the fast and sensitive analysis of aromatic amines by electrochemical detection. The chromatographic separation of nine carcinogenic aromatic amines was performed on an ABZ + PLUS column with detection limits up to pM L(-1) levels. Mobile phase comprised of methanol-acetate buffer of pH 5 (45:55, v/v) used at a flow rate of 0.2 ml min(-1). The detection was performed with a 6 mm glassy carbon electrode at an applied potential of 0.8 V versus Ag/AgCl. An intraday RSD for retention time and peak area were between 0.22% and 0.73% and 1.86% and 4.03%, respectively. The interdays RSD for retention time and peak area were between 0.47% and 1.35% and 2.04% and 4.42%, respectively. The applicability of the assay has been demonstrated by analyzing these aromatic amines in lake water and synthetic food colour additives. A comparison is given between electrochemical and UV detection.     

Conversion to isothiocyanates via dithiocarbamates for the determination of aromatic primary amines by headspace-solid phase microextraction and gas chromatography

A novel and highly selective method has been developed for the determination of aromatic primary amines by their conversion to dithiocarbamates by reaction with carbon disulphide, and then to isothiocyanates, which are volatile, by heating in the presence of a heavy metal ion. Zinc(II) was selected owing to its low toxicity and optimum yield of isothiocyanates. The latter were sampled by headspace-solid phase microextraction (HS-SPME) on divinylbenzene-carboxen-polydimethylsiloxane fibre, 50/30 μm. The HS-SPME procedure was optimized to provide adequate limits of detection in the analysis of aromatic amines in their real samples by gas chromatography with mass spectrometry (GC–MS) or flame ionization detection (GC–FID). The method gave rectilinear calibration graph, correlation coefficient and limit of detection, respectively, over the range 0.08–100 μg L⁻¹, 0.9950–0.9990 and 25–240 ng L⁻¹ in gas chromatography–mass spectrometry, and 0.01–10 mg L⁻¹, 0.9910–0.9991 and 0.8–3.0 μg L⁻¹ in gas chromatography–flame ionization detection. At two different levels, 10 and 40 μg L⁻¹, the range of intra-day RSD was 3.7–8.5% (GC–MS) and 3.3–9.2% (GC–FID), respectively. The proposed method is simple and rapid, and has been applied to determine aromatic primary amines in the environmental waters, food samples of ice cream powder and soft drinks concentrate, and food colours. The intra-day RSD in the analysis of real samples by GC–MS was in the range 3.6–6.2%. The food/colour samples were found to contain elevated levels of aniline and 2-toluidine.     

Determination of heterocyclic aromatic amines in meat extracts by liquid chromatography-ion-trap atmospheric pressure chemical ionization mass spectrometry

When protein-rich foods are processed under normal cooking conditions, heterocyclic aromatic amines (HAAs) can be generated at a few parts per billion level. In this work, we have analyzed the HAAs present in a lyophilized meat extract by means of a simplified solid-phase extraction procedure. All the analytes were collected in a single extract with recoveries in the range of 45.6-75.2%, so the analysis time has been greatly reduced. Problems derived from the less exhaustive purification of the extract have been solved by using MS(ion trap) detection. The RSD for quantification ranged from 2.1% to 5.1% for run-to-run precision and from 5.2% to 11% for day-to-day precision. The limits of detection for standard solutions ranged from 20 to 150 pg injected. For the meat extract analyzed limits of detection from 0.9 to 11.2 ng g(-1) were obtained. Results of the quantification are in agreement with those obtained using different clean-up procedures.     

A simple test to monitor aromatic amine clearance in occupational workers

A simple, quick and sensitive procedure is described to monitor urinary clearance of aromatic amines in industrial workers. Estimation is based on the measurement of coloured Schiff's bases developed with 4-dimethylaminocinnamaldehyde-organic acid reagent. Extraction of amines in water saturated butanol ensured 89-97% recovery from biological samples with a coefficient of variation of less than 8%. Regression analyses of the absorbance-concentration curves with different aromatic amines showed excellent correlation coefficient and a high molar absorptivity with the lowest detection limits ranging between 0.05-0.12 microgram ml-1. The proposed reagent has additional use as a spray reagent to detect amine spots on chromatograms. Low final acidity ensures estimates of free amines without causing hydrolysis of conjugated amines.     

Facile N‐Alkylation/N′‐Arylation Process: A Direct Approach to Aromatic Aminoalkyl Amines

An intriguing C?N transformation involving a catalyst‐free N‐alkylation/N′‐arylation process in a multicomponent reaction with secondary amines, cyclic tertiary amines and electron‐deficient aryl halides has been described. In this case, the N‐alkylation of secondary amines, utilizing cyclic tertiary amines as alkyl group sources, is enabled by a facile C?N cleavage. Such an operationally simple method could facilitate access to aromatic aminoalkyl amines, nitrogen‐containing bioactive molecules, in good to excellent yields.     

Liquid-phase microextraction and GC for the determination of primary, secondary and tertiary aromatic amines as their iodo-derivatives

Presence of iodine in aromatic amines, introduced by their reaction with iodine, and other electron withdrawing substituents such as chlorine and nitro, has been found to afford excellent liquid-phase microextraction (LPME) in toluene and separation by gas chromatography in the determination of primary, secondary and tertiary aromatic amines. The effect is due to decreased basic nature of amines when electronegative substituents are present. Single drop microextraction (SDME) of the amines in 2 μl of toluene and injection of the whole extract into GC, or LPME into 50 μl of toluene and injection of 2 μl of extract, were used. LPME has been found more robust and to give better extraction in shorter period than SDME. In SDME-GC-FID, the average correlation coefficient was 0.9939 and average limit of detection 25 μg l⁻¹ (range 12-61 μg l⁻¹) whereas the corresponding values in LPME-GC-MS were, respectively, 0.9953 and 33 ng l⁻¹ (range 18-60 ng l⁻¹). The method has been applied to determine aromatic amines in river water, dye factory effluents and food dye stuffs. The LPME was found as robust, rugged and simple extraction method.     

Solid-phase extraction-gas chromatography and solid-phase extraction-gas chromatography-mass spectrometry determination of corrosion inhibiting long-chain primary alkyl amines in chemical treatment of boiler water in water-steam systems of power plants

Gas chromatography with simultaneous flame-ionization detection (FID) and a nitrogen-phosphorus detection (NPD) as well as gas chromatography-mass spectrometry (GC/MS) has been used to characterize long-chain primary alkyl amines after derivatization with trifluoroacetic anhydride (TFAA). Electron impact ionization- (EI) and negative chemical ionization (NCI) mass spectra of trifluoroacetylated derivatives of the identified tert-octadecylamines are presented for the first time. The corrosion inhibiting alkyl amines were applied in a water-steam circuit of energy systems in the power industry. Solid-phase extraction (SPE) with octadecyl bonded silica (C18) sorbents followed by gas chromatography were used for quantification of the investigated tert-octadecylamines in boiler water, superheated steam and condensate samples from the power plant. The estimated values were: 89 microg l(-1)(n = 5, RSD = 7.8%), 45 microg l(-1) (n = 5, RSD = 5.4%) and 37 microg l(-1)(n = 5, RSD = 2.3%), respectively.     

Reductive Molybdenum‐Catalyzed Direct Amination of Boronic Acids with Nitro Compounds

The synthesis of aromatic amines is of utmost importance in a wide range of chemical contexts. We report a direct amination of boronic acids with nitro compounds to yield (hetero)aryl amines. The novel combination of a dioxomolybdenum(VI) catalyst and triphenylphosphine as inexpensive reductant has revealed to be decisive to achieve this new C?N coupling. Our methodology has proven to be scalable, air and moisture tolerant, highly chemoselective and engages both aliphatic and aromatic nitro compounds. Moreover, this general and step‐economical synthesis of aromatic secondary amines showcases orthogonality to other aromatic amine syntheses as it tolerates aryl halides and carbonyl compounds.     

胺桥杯［4］芳烃固相微萃取探头的特性及其应用

采用溶胶-凝胶方法制备了25,27-二羟基-26,28-(1′,10′-二氧代-4′,7′-二氮杂-3′,8′-二氧代亚辛基)-对-特丁基-杯［4］芳烃/羟基硅油(胺桥杯［4］/OH-TSO)固相微萃取(SPME)探头,通过对脂肪胺和芳胺的分析研究了它的特性。该探头具有耐高温、抗溶剂冲洗、使用寿命长、重现性好等特点。杯环上极性胺桥的引入增强了涂层的极性,因而在不需衍生的情况下对脂肪胺和芳胺都具有很好的萃取能力,表现出对胺类化合物的特殊选择性。脂肪胺的检出限为0.19～39.51 μg/L,线性范围达3个数     

Parallel solid-phase synthesis of 2-arylamino-6H-pyrano[2,3-f]benzimidazole-6-ones

The parallel solid-phase synthesis of a hydrophilic psoralen analogue, 2-arylamino-6H-pyrano[2,3-f]benzimidazole-6-ones (2-arylaminoimidazocoumarins), has been developed. The resin-bound 7-fluoro-4-methyl-6-nitro-2-oxo-2H-1-benzopyran-3-carboxylic acid underwent aromatic substitution with primary amines, followed by reduction of the nitro group with tin(II) chloride. The cyclization of the o-dianilino intermediates was accomplished with aryl isothiocyanates in the presence of 1,3-diisopropylcarbodiimide (DIC). The final products were released from the resin with trifluoroacetic acid (TFA) and obtained in high purity and good isolated yield. The 2-arylaminoimidazocoumarins exhibit interesting spectral properties.     

Solid-phase synthesis of substituted guanidines using a novel acid labile linker

A novel acid labile linker for solid-phase synthesis of substituted guanidines has been developed. Its synthetic utility is exemplified by high-yielding pyrazole displacement with structurally and electronically diverse sets of aliphatic and aromatic amines. The final cleavage is achieved by treatment with 95:5 trifluoroacetic acid/water for 1 h. The corresponding guanidines were obtained in high purity (80-95%) and good isolated yields (50-95%). The scope and limitations of this linker were further demonstrated by the solid-phase synthesis of an 880-member library of individual trisubstituted arylguanidines employing pyrazole displacement with a set of 11 anilines and two subsequent Mitsunobu N-alkylations with sets of 10 and 8 alcohols, respectively.     

Determination of aliphatic amines by high-performance liquid chromatography-amperometric detection after derivatization with naphthalene-2,3-dicarboxaldehyde

A simple and sensitive liquid chromatographic method has been developed for the determination of low molecular weight aliphatic amines after their pre-column derivatization with naphthalene-2,3-dicarboxaldehyde (NDA). Derivatization conditions, including the NDA concentration, reaction pH and reaction time have been investigated for method optimization. The chromatographic separation of five amines was performed on ABZ PLUS column using mobile phase of methanol-water (80:20, v/v) at a flow rate of 0.2 mL min⁻¹. The detection was carried out with a 6 mm glassy carbon electrode at the applied potential of 0.7 V versus Ag/AgCl reference electrode. The detection limits were between 23.3 and 34.4 nmol L⁻¹ of amines with a sample injection volume of 2 μL. The present method was applied for the determination of aliphatic amines in lake water. The recovery ranged 52.2-127.9%. The RSD in analytes retention time was less than 0.3% and 2.4% for intra- and inter-day analyses, respectively. The RSD in peak area was below 5.8% for both intra-day and inter-day analyses. The total analysis was completed within 20 min.