Polymeric dressing formulations containing water-soluble fullerene derivatives

The effect of small additions of water-soluble fullerene C₆₀ derivatives on the strength properties of polyvinyl alcohol films was examined. Solutions of polyvinyl alcohol and fullerenol were tested as polymeric dressing formulations for glass-reinforced plastics based on a thermoplastic polyethylene or polyamide matrix.     

Induced phase separation in cellulose nanocrystal suspensions containing ionic dye species

Suspensions of negatively charged cellulose nanocrystal are obtained by sulfuric acid hydrolysis of cotton cellulose. Within a specific concentration range, the suspensions spontaneously phase separate to give isotropic and chiral nematic phases. Added anionic dyes of varying charge cause separation of an isotropic phase from the highly concentrated, completely anisotropic suspensions; these dyes have a much greater effect on the suspensions than the equivalent ionic strength of a simple 1:1 electrolyte (sodium chloride). Neutral, cationic and cellulose-binding anionic dyes do not cause phase separation in the anisotropic cellulose suspensions.     

阳离子表面活性剂体系中纳米TiO2的合成及表征

在阳离子表面活性剂双十八烷基二甲基氯化铵(D1821)的水溶液中,以钛酸四丁酯为钛源,在室温下合成了具有日光催化性能的纳米TiO2,考察了合成条件(反应温度、pH值、焙烧温度)对产物结构的影响。通过x射线衍射、透射电镜对所合成的样品进行表征,并对非离子表面活性剂壬基酚聚氧乙烯醚(NPE-10)进行了光催化降解性能研究。结果表明:反应温度为20℃,pH=7,焙烧温度为500℃时所合成的样品颗粒分散均匀,晶型完整,而且形成了锐钛矿和金红石的混晶结构。日光照射下,这种纳米TiO2对NPE-10表现出了较好的光催化性能,3h的降解率达到了80%。     

Thermal characterization of lovastatin in pharmaceutical formulations

Thermogravimetry (TG) and differential scanning calorimetry (DSC) are useful techniques that have been successfully applied in the pharmaceutical industry to reveal important information regarding the physicochemical properties of drug and excipient molecules such as polymorphism, stability, purity, and formulation compatibility among others. In this study, lovastatin was studied by TG, DSC, and other techniques such as Fourier transform infrared spectroscopy, optical microscopy, X-ray diffraction, chromatography, and mass spectrometry. Lovastatin showed melting point at 445 K and thermal stability up to 535 K. It presented morphological polymorphism, which in the drug has the same unit cell, but with different crystal habits. Preservative excipient butylhydroxyanisole (BHA) causes amorphization of lovastatin crystallites and, therefore is incompatible with lovastatin. Degradation by hydrolysis was observed under neutral, acid, and basic conditions. The active degradation product, lovastatin hydroxyacid, was obtained after neutral and basic hydrolysis.     

Estimation of berberine in ayurvedic formulations containing Berberis aristata

A sensitive, simple, rapid, and efficient high-performance thin-layer chromatographic (HPTLC) method has been developed and validated for the analysis of berberine in marketed Ayurvedic formulations containing Berberis aristata DC for regulatory purposes. Chromatography of methanolic extracts of these formulations was performed on silica gel 60 F254 aluminum-backed TLC plates of 0.2 mm layer thickness. The plate was developed up to 66 mm with the ternary-mobile phase butanol-acetic acid-water (8 + 1 + 1, v/v/v) at 33 +/- 5 degrees C with 5 min of tank saturation. The marker, berberine, was quantified at its maximum absorbance of 350 nm. The limit of detection and limit of quantitation values were found to be 5 and 10 ng/spot. The linear regression analysis data for the calibration plot showed a good linear relationship with correlation coefficient = 0.9994 in the concentration range of 10 to 50 ng/spot for berberine with respect to peak area. The instrumental precision was found to be 0.49% coefficient of variation (CV), and repeatability of the method was 0.73% CV. Recovery values from 98.27 to 99.11% indicate excellent accuracy of the method. The developed HPTLC method is very accurate, precise, and cost-effective, and it has been successfully applied to the assay of marketed formulations containing B. aristata for determination of berberine.     

Development and validation of a stability-indicating micellar electrokinetic chromatography method for the determination of ezetimibe in pharmaceutical formulations.

A micellar electrokinetic chromatography (MEKC) method was validated for the analysis of ezetimibe. The method was carried out on a fused-silica capillary (50 microm i.d.; effective length, 40 cm). The background electrolyte consisted of a 25 mM borate buffer and 25 mM anionic detergent SDS (pH 9.75)/methanol (90:10, v/v). The capillary temperature was maintained at 35 degrees C, the applied voltage was 30 kV; the injection was performed using a pressure mode at 50 mbar for 5 s, with detection at 232 nm. The method was linear in the range of 2-150 microg/mL (R2=0.9999). The specificity and the stability-indicating capability were proven through degradation studies, which also showed that there was no interference of the excipients. The limits of quantitation and detection were 2 and 0.41 microg/mL, respectively. The method was applied for the analysis of ezetimibe pharmaceutical formulations, and the results were compared to those of the liquid-chromatography method.     

Induced phase separation in low-ionic-strength cellulose nanocrystal suspensions containing high-molecular-weight blue dextrans

Spontaneous entropic phase separation phenomena occur in a wide range of systems containing highly anisotropic colloidal particles. Among these are aqueous suspensions of negatively charged cellulose I nanocrystals produced by sulfuric acid hydrolysis of native cellulose, which phase separate into isotropic and chiral nematic liquid-crystalline phases. Phase separation of an isotropic phase from a completely ordered nanocrystal suspension may be induced by the addition of salts or nonadsorbing macromolecules. In previous work (Edgar, C. D.; Gray, D. G. Macromolecules 2002, 35, 7400-7406), an isotropic phase was found to form over a period of several days when blue dextran (a sulfonated triazine dye, Cibacron blue 3G-A, covalently attached to high-molecular-weight dextran chains) was added to initially ordered suspensions. Here we report work showing that the observed phase separation was associated with the charged dye molecules attached to the dextran. The Cibacron blue 3G-A dye attached to blue dextran was found to induce greater phase separation than free (unbound) dye; at increasing ionic strength, depletion attractions due to the blue dextran increasingly contribute to the phase separation.     

Synthesis and characterization of Co2+: MgAl2O4 nanocrystal

Nanocrystalline Co²⁺-doped magnesium aluminate spinel (MgAl₂O₄) has been synthesized for the first time from aqueous solution of metal nitrates containing citric acid as chelating agent by a sol-gel method. The gel was heat-treated at temperatures ranging from 710°C to 1000°C. The heated powder samples were characterized by X-ray diffraction analysis (XRD), transmission electron microscope (TEM), infrared (IR) and absorption spectroscopy. The results showed that the homogeneous nanocrystalline Co²⁺: MgAl₂O₄ could be obtained at the low temperature of 710°C. The optimal temperature is about 900°C and the average size of the powder grains is 50 nm or so. In the absorption spectrum, a broad absorption band from 1200 nm to 1600 nm was found, which indicated the existence of Co²⁺ in the tetrahedral sites because of the ⁴A₂(⁴F) → ⁴T(⁴F) transition of Co²⁺.     

Quantum-efficiency enhancement and mechanical responsiveness of solid-state photoluminescent flexible materials containing uniaxial cellulose nanocrystal arrays

Cellulose - Assembling cellulose nanocrystals (CNCs) can induce solid-state photoluminescence based on Stokes scattering. Such photoluminescent materials are free of photo-quenching and show great...     

In situ polymerization and characterization of elastomeric polyurethane-cellulose nanocrystal nanocomposites. Cell response evaluation

Polyurethane/Cellulose nanocrystal (CNC) nanocomposites have been prepared by means of in situ polymerization using CNCs as precursors of polyurethane chains. Thermal, mechanical and morphological characterization has been analyzed to study the effect of CNC on the micro/nanostructure, which consisted of individualized nanocellulose crystallites covalently bonded to hard and soft segments of polyurethane. The incorporation of low CNC content led to a tough material whereas higher amount of CNC provoked an increase in soft and hard segments crystallization phenomenon. Moreover, from the viewpoint of polyurethane and polyurethane nanocomposites applications focused on biomedical devices, biocompatibility studies can be considered necessary to evaluate the influence of CNC on the biological behaviour. SEM micrographs obtained from cells seeded on top of the materials showed that L-929 fibroblasts massively colonized the materials surface giving rise to good substrates for cell adhesion and proliferation and useful as potential materials for biomedical applications.     

slow release rubber formulations containing ZnSO4

Styrene butadiene (SBR) and natural rubber (NR) can be used as binding matrices to control the release of zinc (Zn) which is a micro-nutrient for plants. The leaching rate of zinc in an aqueous medium depends on the concentration of zinc sulphate loaded in the two types of rubber used, the temperature of the surrounding environment and the pH of the aqueous medium. Water uptake was increased with increasing concentration of ZnSO₄. The sustained release of zinc ions from the investigated formulations was prolonged for over five months. The mechanical properties of the vulcanizates were affected as the concentration of zinc sulphate changed.     

Synthesis and characterization of polybenzoxazine containing phosphorus

The novel benzoxazine monomer containing phosphorus has been synthesized based on multifunctional amine route from bis(4-aminophenyl)phenylphosphate,p-cresol and formaldehyde.Subsequently,the benzoxazine monomer was thermo-cured into polybenzoxazine containing phosphorus.The chemical structures were identified by nuclear magnetic resonance(NMR),Fourier transform infrared spectroscopy(FT-IR).The curing reaction was monitored by differential scanning calorimetry(DSC) and FT-IR.The thermal and flame-retardant properties of obtained polybenzoxazine were evaluated by dynamic mechanical thermal analysis(DMA),thermal gravimetric analysis(TGA) and oxygen index meter, respectively.The results show that the novel polybenzoxazine has high limiting oxygen index(38.1) and glass transition temperature(232℃).     

Design, synthesis and characterization of a Pt-Gd metal-organic framework containing potentially catalytically active sites

The heterobimetallic metal-organic framework {[(BPDC)PtCl(2)](3)(Gd(H(2)O)(3))(2)}.5H(2)O (BPDC = 2,2'-bipyridine-5,5'-dicarboxylate) has been designed and synthesized by hydrothermal methods. The new coordination polymer contains subunits of (BPDC)PtCl(2) (1) where both N atoms of the BPDC ligand are attached to a square-planar Pt(II) center. The two remaining cis coordination sites at Pt(II) are occupied by chloride ions. The final structure (2) of the polymeric network is obtained when Gd(III) ions link together the (BPDC)PtCl(2) units, which are organized in sheets, into larger blocks. These blocks are stacked along the crystallographic [010] direction and are held together by a hydrogen bonding scheme that involves carboxylate oxygen atoms and water molecules in the coordination sphere of Gd. The coordination polymer 2 can be obtained in a single-step reaction or in a two-step synthesis where the corresponding Pt complex (1) was first synthesized followed by reacting 1 with Gd(NO(3))(3).6H(2)O. In situ high temperature powder X-ray diffraction shows that the crystalline coordination polymer transforms into an anhydrous modification at 100 degrees C. This modification is stable to 350 degrees C, at which temperature the structure starts to decompose. The coordination sphere around platinum in the polymer closely resembles organometallic Pt complexes that have been previously found to catalytically or stoichiometrically activate and functionalize hydrocarbon C-H bonds in homogeneous systems.     

Ordered nanocrystal/silica particles self-assembled from nanocrystal micelles and silicate

Ordered gold nanocrystal/silica particles were synthesized through self-assembly of nanocrystal micelles and silicate. Depending on the use of surfactants, and the kinetic conditions of silica hydrolysis and condensation, well-shaped and irregularly-shaped silica particles were formed, inside which the nanocrystals self-organized in a face-centered cubic mesostructure.     

Comparison of analytical methods for quality control of pharmaceutical formulations containing glutathione

Summary The aim of this investigation was the study and development of analytical procedures suitable for the assay of glutathione (GSH) in pharmaceutical formulations. Two are based on isocratic HPLC with a 250 mm×4.6 mm i.d., 5 μm C₁₈ column and UV detection. In the first procedure sample solutions were injected without pretreatment whereas in the second the samples were injected after derivatization with Ellman’s reagent which forms an easily detectable adduct with GSH. Good linearity was obtained over the range 0.12–6.00×10⁻⁴M for the direct procedure and 0.25–3.00×10⁻⁴M for the derivatization procedure. The precision and rapidity of analysis were also good for both methods. The third method is based on capillary zone electrophoresis (CZE) in a 27 cm×75 μm i.d untreated fused silica capillary containing pH 7 phosphate buffer. All results are in good agreement with a spectrophotometric procedure used as reference method.     

Simultaneous determination of hydroxylamine and cyanide in formulations containing pralidoxime salts by flow injection

A flow injection method is described for the simultaneous determination of cyanide and hydroxylamine which are known decomposition products of formulations containing pralidoxime salts used in the treatment of anticholinesterase poisoning. By using the diffusion of HCN from the carrier stream followed by amperometric detection, high selectivity and sensitivity and a wide dynamic range can be achieved. Hydroxylamine is determined by its oxidation with iodine to nitrite which can then be determined colorimetrically. The gas diffusion unit effectively acts as a stream splitter for the two analytes allowing their simultaneous determination from a single sample injection. The performance of the system and its applicability to thermally stressed pralidoxime solutions are described.     

Quantitation and characterization of phospholipids in pharmaceutical formulations by liquid chromatography-mass spectrometry

A simple and fast method for phospholipid analysis was developed using high-performance liquid chromatography-mass spectrometry with an atmospheric pressure ionization interface. Separation of the phospholipid molecular species was achieved using a linear gradient of a mixture of chloroform-10 mM ammonium acetate-methanol (30:5:65) on a silica column. Optimization of the mass spectrometer conditions has allowed the method to separate and detect the phospholipids mainly as protonated molecular species. In comparison to existing LC-MS methods, improvement in the total analysis time and sensitivity were achieved. Separation of all major phospholipid molecular classes was achieved in less than 6 min. Marked improvement was observed in the linearity of the response of the phospholipids studied providing a linear response over three orders of magnitude. Data supporting the validation of this method for the characterization of major phospholipids molecular species are also presented.     

Determination of fosinopril in pharmaceutical formulations containing hydrochlorothiazide by multiwavelength UV spectrophotometry

A sensitive, simple, rapid and precise method for the simultaneous determination of fosinopril (FOS) and hydrochlorothiazide (HCT) in pharmaceutical formulations is presented. These active ingredients are extracted in aqueous solution and measured by multiwavelength UV spectrophotometry using the program QUEST. HCT acts as an internal standard to verify the accuracy of the analysis. Some aspects of the chemical, spectroscopic and thermoanalytical behaviour of FOS are also reported.     

Formation and characterization of microemulsions containing polymeric silicone

We have prepared microemulsions consisting of water/[40 wt % polyoxyethylene (20 mol) glycerin isostearate (abbreviated as POE-GIS) + 60 wt % random copolymer of polyoxyethylene (POE, 38 mol)/polyoxypropylene (POP, 10 mol) pentaerythritol tetramethyl ether {abbreviated as PEPTME (38/10)}]/[polyoxyethylene (POE, 19 mol)/polyoxypropylene (POP, 19 mol) polydimethylsiloxane copolymer (abbreviated as POE/POP-PDMS)] and water/[40 wt % POE-GIS + 60 wt % PEPTME (38/10)]/[95 wt % POE/POP-PDMS + 5 wt % oleic acid (abbreviated as OA)] systems and characterized them with optical observation, rheometry, and freeze-fracture transmission electron microscopy (FF-TEM) images. Bicontinuous and droplet-type O/W (oil-in-water) microemulsions are formed depending on the volume fraction of water. The bicontinuous structure observed in the oil-rich region, upon successive dilution with water, is transformed into a droplet-type microemulsion without phase separation.The prepared droplet-type microemulsion containing polymeric silicone and random copolymer PEPTME (38/10) as a cosurfactant in the water-rich region has potential applications in cosmetics.     

含硅二烃基锡(Ⅳ)邻菲咯啉配合物的合成及结构表征

1980年,Crowe等人首次报道了六配位有机锡(Ⅳ)配合物R2SnX2L2(R=烷基或苯基;X=F,C l,Br,I或NCS;L为含O或N的有机配体)对P388淋巴白血病细胞有抑制活性[1]。以后人们合成许多二烃基锡配合物,并对基作了广泛的研究[2,3]。结果表明,二烃基锡化合物的抗肿瘤活性主要取决于烃基,混合二烃基锡化合物毒性较高,使它们的应用受到一定的限制。在药物分子中,某个碳原子被硅取代,称为硅药(Sila-drug),其特点是能降低毒性,有时也能提高药效[6]。因此,开展对含硅有机锡化合物进行研究,对于探讨分子中引入硅原子后对有机锡化合物性质的影响有一定的…