共查询到9条相似文献,搜索用时 78 毫秒
1.
提出一种用于有机电致发光器件(OLED)的双面对称矩形金属光栅电极,采用时域有限差分方法(FDTD)模拟研究了OLED中表面等离子体激元的激发和耦合传输的物理规律和物理机制,详细计算和分析了该光栅结构的周期、槽宽、光栅高度、槽底厚度、入射光的入射角与电极透射效率的关系,并由此优化了结构的几何参数,使金属电极的光导出效率相对于通常的金属银层电极增强了1.77倍,为基于表面等离子体激元的高效光导出器件的优化设计提供了理论依据。 相似文献
2.
采用时域有限差分法(FDTD)研究了带金属尖四棱锥小孔光探针光斑近场分布特性,分析了金属尖的长度、尖端半径及距离小孔位置等因素对近场电场分布的影响.讨论了该类光探针的电磁波通过等离子体激元方式从小孔传输到金属尖的机理.Taminiau等人用不同方法获得的计算结果在本文的计算结果中得到了印证.在此基础上,本文重点分析、讨论了Pohl等人在1984—1986年获得20—25nm高分辨率图像的原由,讨论了该实验系统的成像机理和类型的归属.计算结果表明:Pohl等人的实验系统成像机理已离开小孔径扫描近场光学显微镜类型,报告认为应归属金属尖散射扫描近场光学显微镜一类.本结果对设计性能优良的光探针具有参考意义. 相似文献
3.
研究场追迹数值模拟技术在超小自聚焦光纤探头设计与分析中的应用方法.首先,论述场追迹的概念及其基本原理;其次,论述场追迹在VirtualLab软件中的实现方法;最后,研究超小自聚焦光纤探头在基于场追迹的物理光学软件VirtualLab中的建模与分析方法,并进行仿真结果与实验结果的比较分析.结果显示,如设无芯光纤的长度为0.36 mm,自聚焦光纤透镜的长度分别为0.10,0.11和0.12 mm,计算所得的工作距离分别为0.75,0.63和0.51 mm,光斑尺寸分别为32,24和19 μm.理论计算结果与实验结果符合,表明基于场追迹的数值模拟技术是研究超小自聚焦光纤探头设计与分析方法的一个有效手段. 相似文献
4.
5.
We demonstrate high-resolution fluorescence imaging of single molecules using near-field scanning optical microscopy (NSOM)
with a tiny aperture probe for two different wavelengths in visible range in the illumination mode of operation. The spatial
resolutions obtained at both excitation wavelengths were almost the same and the highest resolution realized was about 10
nm. To discuss the achievable resolution in aperture NSOM, we also employed a computer simulation by the finite-difference
time-domain method for various aperture sizes and wavelengths. The resolution of 10 nm is predicted to be contributed by the
single peak of localized near-field light around the rim of the aperture. 相似文献
6.
7.
Hongxing Zheng Lihui Jiang 《International Journal of Infrared and Millimeter Waves》2004,25(5):855-864
This paper deals with the two dimensional (2-D) infrared photonic crystal slab with an air-bridge structure featuring defect waveguides in which the optical propagation properties were obtained by measurements of transmission spectra. 3-D finite-difference time-domain (FDTD) simulations have revealed the appearance of four defect propagation modes for the band structure and transmission spectra in the air-bridge slab. These defect modes were experimentally identified in the measured transmission spectra. 相似文献
8.
An-xue Zhang Hui Wu Chen Guo Yan-sheng Jiang 《International Journal of Infrared and Millimeter Waves》2008,29(10):946-952
For resolving the essential problem that the beam is too narrow in the application of the high-power UWB (Ultra-Wideband)
antenna with single-source, a novel wide-beam high-power parabolic antenna with dual-source has been designed, and the edge
of the paraboloid was cut in order to reduce the size of the antenna. Radiation properties of this proposed antenna are studied
with finite-difference time-domain (FDTD) numerical method. The radiation properties of the proposed antenna can be improved
by changing the structure of the parabolic antenna and adjusting the angle between the source and the axis of the antenna.
The result shows that the beam-width has been improved significantly under the precondition of maintaining the peak power,
and also the size of the antenna was minished by cutting the edge of the paraboloid. 相似文献