Ferron逐时络合比色法测定水体系中羟基聚合铝形态的问题评析

Ferron(7-碘-8-羟基喹啉-5-磺酸)逐时络合比色法是目前各领域对羟基聚合铝形态开展研究的一项关键技术。全面分析该方法在测定水体系中羟基聚合铝形态研究进展的基础上,主要从Ferron逐时络合比色法测定不同羟基聚合铝形态的原理,Al-Ferron显色体系的摩尔吸光系数(ε)及其与羟基聚合铝形态测定的关系,Al-Ferron络合显色的影响因素以及其测定结果的分析,综合评述了目前Ferron逐时络合比色法在实际应用中存在的亟待澄清的问题。以期为研究者提供有借鉴意义的参考。     

铝盐水解聚合及其形态转化过程的电位滴定曲线研究

通过对中等滴碱速度下强制铝盐水解聚合过程中的电位滴定曲线分析,提出了临界点的概念。临界点是铝盐水解聚合电位滴定曲线的特征点,它与实验条件有关,临界点的变化反映了实验条件对铝盐水解聚合过程和羟基铝形态转化的影响．按照OH与Al摩尔比的大小,利用铝盐水解聚合电位滴定曲线的3个临界特征点,可以将铝的形态变化定量地划分为4个区：即水解单核铝区（包括Al^3 和单核铝Ala);低／中聚合铝区(主要包括Al2～Al12形态);高聚合铝区(主要包括AL13～AL54形态)和溶胶／凝胶区(Ale即Al(OH)3形态);溶胶／凝胶溶解区主要形态为Al(OH)4^-),从而为研究铝的水解聚合过程提供了定量基础。同时考察了铝浓度、温度、卤素离子、硅酸根、有机酸根等多种凶素对铝溶液碱滴定pH～n曲线及其划分铝形态临界点的影响,探讨了这些凶素对铝盐水解聚合过程及其形态转化的影响规律,为研究各种凶素对铝的水解聚合过程的影响提供了一种新思路。     

高效液相色谱法研究铝形态的可靠性

高效液相色谱法在铝形态的研究中发挥着举足轻重的作用,而铝形态的易变性和复杂性要求色谱条件无侵入性和检测手段具有形态选择性。文中列举了若干实例说明高效液相色谱法在铝形态分析中的常用方法和注意事项。     

8-羟基喹啉动态有序介孔SiO_2涂层毛细管微萃取与ICP-MS在线联用分析天然水中铝的形态

本文采用溶胶-凝胶方法合成SiO_2溶胶,制备了8-羟基喹啉改性的有序介孔SiO_2涂层毛细管,建立了毛细管微萃取-电感耦合等离子体质谱(CME-ICP-MS)在线联用技术分析铝形态的新方法.选择游离态铝和Al-柠檬酸络合物为不同铝形态的代表物,详细探讨了不同实验参数对铝形态分离的影响.结果表明:8-羟基喹啉改性的有序介孔SiO_2涂层毛细管在pH为5.0～8.0的范围内可以有效地分离试样中的稳定态单核铝(柠檬酸铝)和非稳定态无机单核铝(游离态铝).方法的富集倍数为10,检出限为0.34 ng·mL~(-1).该法应用于湖水、池塘水和长江水中铝的组形态分析,所得结果与8-羟基喹啉负载硅胶微柱分离所得结果吻合很好.     

水解聚合铝溶液中Al_(30)形态的研究

水解聚合铝形态一直是分析、催化、土壤、地球化学、新材料、环境科学和生物毒理学等众多领域研究的前沿和热点。Keggin结构的Al30形态是迄今为止发现的电荷最高的水解铝聚合阳离子,具有独特的分子结构和纳米分子尺寸,它对催化化学、新型功能材料、高效絮凝剂的开发以及铝的水解聚合转化规律研究具有重要意义。本文主要论述了Al30形态的形成、形态分析方法、结构模型以及形成机理等方面的最新研究进展,并对水解聚合铝溶液的研究发展趋势进行了展望。     

水解聚合铝溶液中Al30形态的研究*

水解聚合铝形态一直是分析、催化、土壤、地球化学、新材料、环境科学和生物毒理学等众多领域研究的前沿和热点。Keggin 结构的Al₃₀ 形态是迄今为止发现的电荷最高的水解铝聚合阳离子,具有独特的分子结构和纳米分子尺寸,它对催化化学、新型功能材料、高效絮凝剂的开发以及铝的水解聚合转化规律研究具有重要意义。本文主要论述了Al₃₀形态的形成、形态分析方法、结构模型以及形成机理等方面的最新研究进展,并对水解聚合铝溶液的研究发展趋势进行了展望。     

环境与生物体系中铝形态分析技术的新进展

铝的形态分析是研究环境和生物体系中铝的毒性、生物有效性和传输机理的关键。从IUPAC2000，72，1453和Analyst2001，126(2)对元素形态概念的最新定义，在过去20年来，形态分析都是依据操作手段来进行“组形态”(group species)分析。然而，随着近5年来分析技术的发展，对铝的形态分析逐步达到了“单形态”(individual species)分析的水平。从以下两个方面对该领域的最新进展进行了评述，即：(1)组形态分析(fractionation)：离子交换、电化学分析和流动注射；(2)单形态分析(speciation)：联用技术、核磁共振和计算机拟合。     

水解聚合铝溶液中Al30形态的研究

水解聚合铝形态一直是分析、催化、土壤、地球化学、新材料、环境科学和生物毒理学等众多领域研究的前沿和热点。Keggin 结构的Al₃₀ 形态是迄今为止发现的电荷最高的水解铝聚合阳离子,具有独特的分子结构和纳米分子尺寸,它对催化化学、新型功能材料、高效絮凝剂的开发以及铝的水解聚合转化规律研究具有重要意义。本文主要论述了Al₃₀形态的形成、形态分析方法、结构模型以及形成机理等方面的最新研究进展,并对水解聚合铝溶液的研究发展趋势进行了展望。     

利用27Al NMR研究茶多酚与铝形成配合物的形态

采用27Al NMR技术,研究了不同茶叶中茶多酚与铝形成配合物的形态。考察了在不同pH值和配体/金属(L/M)下铝的存在形态,系统地研究了焦性没食子酸、儿茶酚等官能团模拟化合物与铝的配位体系中铝的形态,探讨了配体取代基的个数与焦性没食子酸-铝配合物的δ27Al的关系,获得了非常有意义的规律,并确定了茶多酚与铝配合物的结构。     

酸性媒染紫—示波计时电位法测定天然水不同形态铝

本文报道酸性媒染紫（SVRS）一示波计时电位法测定天然水中不同形态铝。对24个实际水样分别在酸性pH5.2测定了无机单核铝Ali和碱性pH8.8底液中测定总单核铝Ala,有机单核铝Al0-Ala-Alio同时还应用该法测定了酸化水样中总铝AlT,酸溶态铝AlT=AlT-Ala,从而实现了水样中五种形态铝的电化学测定,测定值与Driscoll方法进行了比较对照,结果基本一致。本法特点为：简便快捷,灵敏准确,可以直接测定与铝毒性密切相关的无机单核铝Ali,无需分离步骤,水样用量小,适用于大批量天然水样中Al形态的快速分析。     

阳离子交换树脂分离-铝试剂分光光度法测定土壤中铝形态

研究了铝试剂光度法测定土壤溶液中铝的最佳条件,着重探讨了共存离子,特别是土壤溶液中的无机离子和有机阴离子对测定铝的影响。采用阳离子交换树脂分离,建立了测定土壤溶液及天然水中铝形态方法。用该法可测定总反应性铝、总单核铝和稳定性单核铝。由总反应性铝减去总单核铝求得酸溶性铝。由总单核铝减去稳定单核铝求得不稳定单核铝。与阳离子树脂交换分离-邻苯二酚紫光度法进行了比较。结果表明：邻苯二酚紫光度法灵敏度较高,但铁的干扰较大。铝试剂光度法灵敏度略低,但铁的干扰较少。阳离子树脂交换分离-铝试剂光度法更适合于测定含铁量比较高的土壤溶液中的铝形态。     

Thermal Stability of Sol-Gel Hydrotalcites

Sol-Gel Hydrotalcites were synthesized using magnesium ethoxide and variable aluminum sources: aluminum acetilacetonate, aluminum chloride, aluminum nitrate and aluminum sulfate; in all cases, the gelation was done at pH 10. X-ray diffraction studies show that the crystallinity depends on the aluminum precursor used. The crystallinity was found in the order aluminum acetylcetonate>aluminum chloride>aluminum nitrate>aluminum sulfate. The precursor determines the sintering behavior as well.     

Determination of aluminum oxide in and on high-purity aluminum by a phenol dissolution method

A simple rapid determination of aluminum oxide in aluminum is described. Aluminum reacts with phenol at 180°C forming aluminum phenoxide but aluminum oxide does not. After the reaction, the aluminum oxide is filtered off and brought into aqueous solution by fusion with potassium hydrogensulfate for determination by atomic absorption spectrometry or by the 8-quinolinol spectrophotometric method. The reaction between aluminum and phenol is stoichiometric. The procedure is applicable to the determination of aluminum oxide in commercial aluminum metals of various forms. The method is relatively rapid and appears to be superior to the conventional bromine—methanol method.     

The future of aluminum chemistry

This article represents a survey of current aluminum chemistry and some predictions regarding what type of aluminum chemistry will be conducted in the year 2000 and after. Because of the abundance and availability of aluminum in the earth, research incorporating this element will always be of importance to applications that impact on daily life. Indeed, applied chemistry is the primary goal of most aluminum research. It is likely that three broad areas of aluminum chemistry, catalysis, materials synthesis, and biological studies, will see substantial activity in the future. The use of aluminum in materials will continue in step with the growth of materials science, in general. In contrast, the use of aluminum compounds in catalysis and in effecting synthetic transformations will see a spectacular increase. This is a result of an increased understanding of the chemistry of aluminum, and the availability of a wide range of compounds containing aluminum which was been achieved over the past few decades during a period of increased attention to Main Group chemistry. In the coming years a clear understanding of the influence of aluminum on biological systems will almost certainly be obtained based upon the quality and amount of effort that has focused on this area in recent times.     

Hydrothermal Synthesis of Porous Al2O3/Al Metal Ceramics: II. Mechanism of Formation of a Porous Al(OH)3/Al Composite

The formation of a porous layer of aluminum hydroxide on the surface of aluminum particles and the aggregation of Al(OH)₃/Al composite particles were analyzed theoretically. It was found that the diffusion mass transfer of the hydroxo complexes of aluminum through the porous structure of a growing layer of aluminum hydroxide to the outer surface is a rate-limiting step in the synthesis of the porous composite. A model mechanism of formation of the porous composite was developed, and rate equations were derived for describing the growth of an aluminum hydroxide layer on the surface of an aluminum particle and changes in the degree of aluminum conversion and the contact radius between composite particles. Based on the developed mathematical model and experimental data, the diffusion coefficient of the hydroxo complexes of aluminum in the porous structure of aluminum hydroxide was calculated.     

Removal of phosphate by aluminum oxide hydroxide

The development and manufacture of an adsorbent to remove phosphate ion for the prevention of eutrophication in lakes are very important. The characteristics of phosphate adsorption onto aluminum oxide hydroxide were investigated to estimate the adsorption isotherms, the rate of adsorption, and the selectivity of adsorption. Phosphate was easily adsorbed onto aluminum oxide hydroxide, because of the hydroxyl groups. The adsorption of phosphate onto aluminum oxide hydroxide was influenced by pH in solution: the amount adsorbed was greatest at pH 4, ranging with pH from 2 to 9. The optimum pH for phosphate removal by aluminum oxide hydroxide is 4. The selectivity of phosphate adsorption onto aluminum oxide hydroxide was evaluated based on the amount of phosphate ion adsorbed onto aluminum oxide hydroxide from several anion complex solutions. It is phosphate that aluminum oxide hydroxide can selectively adsorb. The selectivity of phosphate onto aluminum oxide hydroxide was about 7000 times that of chloride. This result indicated that the hydroxyl groups on aluminum oxide hydroxide have selective adsorptivity for phosphate and could be used for the removal of phosphate from seawater.     

Preparation of Mullite Fibers by the Sol-Gel Method

Mullite fibers were synthesized from an aqueous solution of aluminum isopropoxide, aluminum nitrate and tetraethylorthosilicate by the Sol-Gel method. The starting solution was prepared by adding aluminum isopropoxide and tetraethylorthosilicate simultaneously to an aluminum nitrate aqueous solution. The spinnability of the starting solution was investigated by varying the molar ratio of aluminum isopropoxide/aluminum nitrate in the solution. Gel fibers were obtained from solutions in a composition range of aluminum isopropoxide/aluminum nitrate of 3 to 5. Gels obtained from spinnable solutions appeared to have high homogeneity in the mixing of the Al/Si components, leading to a sharp 980°C exothermic peak in the DTA curve and a mullitization temperature of 1000°C. However, in the case of gels obtained from unspinnable solutions, a small 980°C exothermic peak was detected, and the mullitization temperature was as high as 1200°C, probably due to greater heterogeneity in the mixing of the Al/Si components.     

Resolution of serum aluminum-binding proteins by size-exclusion chromatography: identification of a new carrier of aluminum in human serum.

We have examined the use of TSK-GEL HW 55S for determining the distribution of aluminum in human serum by size-exclusion chromatography (SEC). In comparison to other SEC matrices, this material has less affinity for ionized aluminum and separates serum proteins and their aluminum complexes with greater resolution. This enabled the identification of a previously unknown protein carrier, provisionally called albindin, that binds aluminum with great stability. Albindin appears to be distinct from the previously described aluminum carriers albumin and transferrin and may be important in the pathogenesis of disease secondary to hyperaluminemia.     

羟基聚合铝晶体研究进展

羟基聚合铝的研究在环境化学中具有重要作用。自然条件下存在的无机单核铝本身具有毒性,而多核铝是比单核铝更毒的铝形态,它们很容易进入人体和植物产生毒害作用。因此,水解聚合铝形态研究一直是环境化学、地球化学和材料催化等众多研究领域的前沿热点课题。本文综述了在新环境材料开发中羟基聚合铝晶体研究的进展,对已获得表征的典型羟基聚合铝的结构特点进行了对比与评述,讨论了不同羟基聚合铝晶体的科学意义和应用价值。     

铝合金表面改性对有机涂层附着力的影响及腐蚀防护性能研究

利用电化学阻抗（EIS）、扫描微参比技术（SRET）、接触角、粗糙度、附着力、盐雾等测试方法,研究了铝合金阳极氧化与贻贝黏附蛋白（MAP）/CeO₂/硅烷γ-APS（MCA）表面复合修饰的腐蚀防护性能以及对改性聚氨酯涂层附着力和耐蚀性的影响。结果表明,MCA复合膜可抑制铝合金的腐蚀,并具有一定的自修复功能;阳极氧化和MCA表面复合修饰可为铝合金提供有效的早期腐蚀防护作用,且能提高铝合金表面粗糙度和润湿性,显著提升改性聚氨酯涂层在铝合金表面的附着力和耐蚀性,因而结合改性聚氨酯涂层和表面复合修饰可实现对铝合金长期有效的腐蚀防护。