新型SiO2/SiO2核壳型固定相的制备与评价

采用层层自组装的方法,以微米多孔硅胶小球为核,将硅胶纳米粒子多层包覆,制备了核壳型SiO2/SiO2硅胶小球.透射电子显微镜表明这种硅胶小球具有明显的核壳结构,氮气吸附实验证明该硅胶小球是典型的介孔材料,具有良好的介孔结构和窄的孔径分布.将其作为基质制备碳十八键合核壳型SiO2/SiO2色谱固定相,该固定相的碳含量与未...     

高分散性SiO_2/PMMA复合材料的制备与表征——稀释分散性

以高无机含量SiO2/聚甲基丙烯酸甲酯(PMMA)接枝复合材料为预分散母料,与PMMA树脂进行熔融共混,制得低无机含量的SiO2/PMMA复合材料.通过切片透射电镜(TEM)观察熔融共混过程中预分散母料内堆积SiO2粒子分散状态的演化.发现预分散母料接枝状态对其影响最为显著,不经接枝修饰的SiO2粒子经熔融共混后,不可避免地会在熔体中产生大量亚微米级的立体团聚体;复杂接枝预分散母料内构成以SiO2粒子为交联点的立体交联结构,其中的堆积SiO2粒子不能在剪切场中得到有效解离和释放;只有在使用简单接枝预分散母料时,基体高分子链才能不断地渗透扩散进入预分散母料内,而预分散母料可被不断地溶胀和撕裂,因而其中的堆积SiO2才可不断地向基体相迁移和扩散,并最终在整个复合材料内实现初级粒子形式的高度均匀稳定分散.     

SiO2胶体颗粒的三维有序自组装

由SiO2胶体颗粒的三维有序自组装可以得到面心立方三维结构,它具有折射率周期性变化的特点。它的制备涉及胶体化学、材料科学等学科的前沿领域。其自组装方法包括胶体颗粒的沉降自组装、胶体颗粒在物体限制下的自组装、胶体颗粒的连续对流自组装和利用胶体颗粒表面电性质的自组装。本文对这些组装方法进行了介绍。     

原位制备PEI/SiO2复合材料及其改性环氧树脂的研究

在N,N-二甲基乙酰胺/四氢呋喃(DMAc/THF)混合溶剂中,在正硅酸乙酯(TEOS)存在条件下,通过溶胶-凝胶法原位制备了聚醚酰亚胺(PEI)/SiO2复合材料.在该复合材料中,当SiO2含量低于20 wt％时,透射电镜(TEM)和扫描电镜(SEM)的观察表明,SiO2纳米粒子可以均匀分散,粒径可在80～300 n...     

Preparation of SiO2@polystyrene@polypyrrole sandwich composites and hollow polypyrrole capsules with movable SiO2 spheres inside

In this paper, we describe a flexible method for preparing conducting building blocks: SiO2@polystyrene@polypyrrole sandwich multilayer composites and hollow polypyrrole (PPy) capsules with movable SiO2 spheres inside. First, SiO2@polystyrene (PS) core/shell composites were synthesized, and then SiO2@PS@PPy sandwich multilayer composites were prepared by chemical polymerization of pyrrole monomer on the surface of SiO2@PS composites. Furthermore, hollow polypyrrole capsules with movable SiO2 spheres inside were obtained after removal of the middle PS layer. The diameter of sandwich multilayer composites could easily be controlled by adjusting the dosage of pyrrole monomer. The conductivities of composites increased with the increase of PPy content. After the insulating PS layer was selectively etched, the conductivities of hollow capsules with movable SiO2 spheres inside were much higher than those of the corresponding sandwich multilayer composites.     

Au和SiO2多壳结构的制备和表征

利用自组装技术和胶体还原化学, 制备出金纳米壳Au@SiO₂以及SiO₂包裹的金纳米壳SiO₂@Au@SiO₂; 去除SiO₂@Au@SiO₂颗粒中的金壳层, 获得含有可移动SiO₂核的空心壳H-SiO₂@M-SiO₂. 结果显示: SiO₂@Au@SiO₂复合颗粒表面光滑, 并保留了金壳的近红外吸收特性; 通过改变复合颗粒外层SiO₂厚度, 可以调节其等离激元共振峰的位置; 王水可以有效地去除SiO₂@Au@SiO₂中的金壳, 相应的等离激元共振峰消失.     

平衡溶胀法研究谷氨酸二硫代氨基甲酸镧对SBR/SiO2复合材料界面作用的影响

通过合成一种含有二硫代羧基,羧基和镧离子的新型稀土促进剂——谷氨酸二硫代氨基甲酸镧(简称La-GDTC),并利用平衡溶胀法研究了La-GDTC对丁苯橡胶(SBR)/SiO2复合材料界面作用的影响.交联密度测试表明,SiO2的加入能够有效提高SBR/La-GDTC/SiO2复合材料的交联密度;而SBR/La-GDTC/S...     

Thermal stability of styrene butadiene rubber (SBR) composites filled with kaolinite/silica hybrid filler

Styrene butadiene rubber (SBR) composites filled with fillers, such as modified kaolinite (MK), precipitated silica (PS), and the hybrid fillers containing MK and PS, were prepared by melt blending. The kaolinite sheets were finely dispersed in the SBR matrix around 20–80 nm in thickness and reached the nano-scale. The SBR composites with fillers exhibited excellent thermal stability compared to the pure SBR. The thermal stability of SBR composites was improved with the increasing of MK mass fraction. When MK hybridized with PS, kaolinite sheets were covered by the fine silica particles and the interface between filler particles and rubber matrix became more indistinct. SBR composite filled by hybrid fillers containing 40 phr MK and 10 phr PS became more difficult in decomposition and was better than that of 50 phr PS/SBR and 50 phr MK/SBR in thermal stability. Therefore, the hybridization of the fine silica particles with the kaolinite particles can effectively improve the thermal stability of SBR composites.     

MWCNTs与疏水纳米SiO_2填充PMMA/PS共混物的导电与动态流变行为

以多壁碳纳米管(MWCNTs)为导电填料、疏水纳米二氧化硅(SiO2)为非导电填料,填充不相容聚甲基丙烯酸甲酯(PMMA)/聚苯乙烯(PS)(1/1,V/V)共混物,制备(PMMA/SiO2)/(PS/MWCNTs)四元导电高分子复合材料(CPC),研究其导电逾渗与动态流变行为,并与PMMA/(PS/MWCNTs)三元CPC进行对比.发现三元、四元CPC具有类似的导电逾渗行为,且逾渗阈值显著低于PS/MWCNTs二元CPC.在四元CPC中,SiO2粒子可细化相区尺寸,提高熔体模量,但不影响熔体热处理过程中的依时性动态导电逾渗行为.MWCNTs与SiO2均显著影响熔体热处理中的依时性模量逾渗行为,分别缩短、延长四元CPC相粗化起始时间,但均延长相粗化时间区间.     

Modified micro-space using self-organized nanoparticles for reduction of methylene blue

By using silica layers bound to the surface of the inner wall of the microchannel via a self-assembly technique which relies on capillary forces to organize the colloids, TiO2 particles were attached to the inner surface of a microcapillary. The reduction rate of methylene blue increased by more than 150 times in the SiO2/TiO2 modified micro-space compared to that in a batch system.     

Direct formation of thermally stabilized amorphous mesoporous Fe2O3/SiO2 nanocomposites by hydrolysis of aqueous iron III nitrate in sols of spherical silica particles

Nanocomposite materials containing 10% and 20% iron oxide/silica, Fe2O3/SiO2 (w/w), were prepared by direct hydrolysis of aqueous iron III nitrate solution in sols of freshly prepared spherical silica particles (St?ber particles) present in their mother liquors. This was followed by aging, drying, calcination up to 600 degrees C through two different ramp rates, and then isothermal calcinations at 600 degrees C for 3 h. The calcined and the uncalcined (dried at 120 degrees C) composites were characterized by thermogravimetric analysis, differential scanning calorimetry, Fourier transform infrared spectroscopy, X-ray diffraction (XRD), N2 adsorption/desorption techniques, and scanning electron microscopy as required. XRD patterns of the calcined composites showed no line broadening at any d-spacing positions of iron oxide phases, thereby reflecting the amorphous nature of Fe2O3 in the composite. The calcined composites showed nitrogen adsorption isotherms characterizing type IV isotherms with high surface area. Moreover, surface area increased with the increasing of the iron oxide ratio and lowering of the calcination ramp rate. Results indicated that iron oxide particles were dispersed on the exterior of silica particles as isolated and/or aggregated nanoparticles. The formation of the title composite was discussed in terms of the hydrolysis and condensation mechanisms of the inorganic FeIII precursor in the silica sols. Thereby, fast nucleation and limited growth of hydrous iron oxide led to the formation of nanoparticles that spread interactively on the hydroxylated surface of spherical silica particles. Therefore, a nanostructured composite of amorphous nanoparticles of iron oxide (as a shell) spreading on the surface of silica particles (as a core) was formed. This morphology limited the aggregation of Fe2O3 nanoparticles, prevented silica particle coalescence at high temperatures, and enhanced thermal stability.     

单分散SiO2/PS复合粒子的制备

聚合物包覆无机物的核一壳结构复合粒子研究长期以来受到关注,源于其应用广泛．根据表面性质要求对无机相或者有机相表面进行功能化,可使得到的复合粒子与不同的应用体系相匹配．这类聚合物包覆无机物的有机／无机复合粒子,已在光学器件、分离、药品、农业、涂料等很多领域有广泛和潜在应用．本文制备这类复合粒子用于石油工业模型催化剂和助剂．     

Preparation of organic/inorganic hybrid and hollow particles by catalytic deposition of silica onto core/shell heterocoagulates modified with poly[2-(N,N-dimethylamino)ethyl methacrylate

The organic/inorganic hybrid particles PSt/P(St-CPEM)(θ)-g-PDMAEMA/SiO(2) were prepared by catalytic hydrolysis and subsequent polycondensation of tetraethoxysilane in the poly[2-(N,N-dimethylamino)ethyl methacrylate] (PDMAEMA) layers grafted on the PSt/P(St-CPEM)(θ) core/shell heterocoagulates. The micron-sized PSt core and the submicron-sized P(St-CPEM) shell particles bearing ATRP initiating groups were synthesized by dispersion polymerization of styrene (St) and emulsifier-free emulsion polymerization of St with 2-chloropropionyloxyethyl methacrylate (CPEM), respectively. The raspberry-shaped PSt/P(St-CPEM)(θ) heterocoagulates with a controlled surface coverage (θ=0.51, 0.81) were prepared by hydrophobic coagulation between the core and the shell particles in an aqueous NaCl solution near the T(g) of P(St-CPEM). Surface modification of heterocoagulates was carried out by ATRP of DMAEMA from the shell particles adsorbed on the core particles. Silica deposition was performed by simply adding tetraethoxysilane to a water/methanol dispersion of PSt/P(St-CPEM)(θ)-g-PDMAEMA. The SEM and TGA revealed that the resulting PSt/P(St-CPEM)(θ)-g-PDMAEMA/SiO(2) composites maintain a raspberry-like morphology after deposition of silica onto the PDMAEMA layer grafted on heterocoagulates. The micron-sized, raspberry-shaped or the submicron-sized, hole-structured silica hollow particles were obtained selectively by thermal decomposition of the PSt/P(St-CPEM)(θ)-g-PDMAEMA/SiO(2). The oriented particle array was fabricated by dropping anisotropically perforated silica particles onto a glass substrate settled at the bottom of a bottle filled with chloroform.     

Facile preparation method of SiO2/PS/TiO2 multilayer core-shell hybrid microspheres

Organic-inorganic hybrid particles have many potential applications, but almost all of this research was focused on the hybrid particles containing one kind of inorganic nanoparticles. This paper presented a facile preparation method for SiO2/PS/TiO2 multilayer core-shell hybrid microspheres. In this approach, positively charged SiO2/PS core-shell hybrid particles were first synthesized by miniemulsion polymerization using cationic initiator and emulsifier. These positively charged SiO2/PS hybrid particles were mixed with tetra-n-butyl titanate for sol-gel reaction to directly form SiO2/PS/TiO2 multilayer core-shell hybrid microspheres. Some influencing parameters such as surfactant concentration, tetra-n-butyl titanate amount, and glacial acetic acid amount were investigated. TEM, TGA, and EDX analyses indicated that titania layers were successfully coated onto the surfaces of hybrid microspheres.     

基于Au/SiO2纳米粒子的结晶紫表面增强拉曼特性研究

采用自组装-化学镀法制备了以SiO2为核,Au为壳层的核壳结构纳米粒子(Au/SiO2),以生物染色剂结晶紫为探针分子,研究了Au/SiO2的表面增强拉曼散射(SERS)效应,并考察了Cl-对SERS增强效应的影响。实验表明,Cl-对SERS有明显的增强效果,这主要是由于Cl-的加入使得Au/SiO2发生团聚,产生大量"热点",从而使SERS增强效果进一步加强。以Au/SiO2(5×1010 mL-1)为活性基底,KCl(0.01 mol/L)为额外增强剂,在水溶液中实现了对结晶紫(CV)的痕量检出,最低检测浓度可达到5×10-10mol/L。     

几种聚合物改性硅胶对苯胺的吸附性能研究

研究了聚乙烯基吡啶改性硅胶(PVP/SiO2)、聚苯乙烯改性硅胶(PS/SiO2)、胺化聚苯乙烯改性硅胶(PS-NH2/SiO2)等3种有机-无机复合材料吸附剂对苯胺的吸附行为。吸附动力学研究表明,3种吸附剂对苯胺的吸附均符合准二级动力学方程。对其粒内扩散模型模拟的结果表明,在3种吸附过程中液膜扩散为主要速率控制步骤。用Langmuir等温吸附方程式和Freundlich等温吸附方程式对其吸附等温线进行了拟合,结果表明,PVP/SiO2、PS/SiO2对苯胺的吸附符合Freundlich等温吸附方程式。     

Fabrication of cage-like particles via unstable seeded dispersion polymerization: A new concept in the polymerization-induced self-assembly

The formation mechanism of hollow micron-sized polystyrene (PS) particles having numerous dents on the surface, so-called cage-like particles, obtained from seeded dispersion polymerization (SDP) of 2-ethylhexyl methacrylate (EHMA) with low molecular weight (MW) PS particles stabilized by poly(vinyl alcohol) (PVA) in the presence of hexadecane droplets was investigated. It was found that association of poly(2-ethylhexyl methacrylate) (PEHMA)/hexadecane phases which occurs due to the instability of the obtained composite particles followed by a diffusion of PS ellipsoidal particles into each other is the main process responsible for the production of such unique morphology. Time course monitoring of the SDP showed that diffusion of hexadecane and/or PS and/or PEHMA phase into PS/PEHMA/hexadecane composite particles through PS shell which happens based on Ostwald ripening is the main phenomenon which results in the formation of the dents on the surface of final particles. Moreover, the experimental results revealed that in this reaction system, the polymerization develops in a faster manner rather than the SDP employing seed particles having higher MWs. Furthermore, it was observed that particles with different surface morphologies can be produced by using different hydrocarbons. The elimination of small particles which are produced in addition to the cage-like ones via decreasing the concentration of the stabilizer was another interesting finding of this research. The acquired results showed that unstable SDP is expected to be a new concept in polymerization-induced self-assembly (PISA) which employs instability of a dispersion for self-assembly of polymeric particles, and therefore, production of polymeric unique objects.     

Self-assembly patterning of silica colloidal crystals

We developed a self-assembly process of silica particles to fabricate desired patterns of colloidal crystals having high feature edge acuity and high regularity. A micropattern of colloidal methanol prepared on a self-assembled monolayer in hexane was used as a mold for particle patterning, and slow dissolution of methanol into hexane caused shrinkage of molds to form micropatterns of close-packed SiO2 particle assemblies. This result is a step toward the realization ofnano/micro periodic structures for next-generation photonic devices by a self-assembly process.     

亚氨二乙酸型复合材料IDAA-PGMA/SiO2对重金属及稀土离子的吸附行为与吸附热力学

将甲基丙烯酸缩水甘油酯(GMA)接枝于硅胶微粒表面,制得了接枝微粒PGMA/SiO₂; 使亚氨二乙酸(IDAA)与接枝PGMA的环氧基团发生开环反应, 从而将亚氨二乙酸基团引入接枝微粒表面, 制得了复合螯合微粒材料IDAA-PGMA/SiO₂. 本文研究了IDAA-PGMA/SiO₂对重金属及稀土离子的螯合吸附行为, 深入地研究了吸附机理与吸附热力学. 研究结果表明: 凭借亚氨二乙酸基团与重金属离子之间的静电作用与配位螯合作用的协同, 复合微粒材料IDAA-PGMA/SiO₂对重金属离子可产生强的螯合吸附作用, 尤其对Pb²⁺离子表现出很强的螯合吸附能力, 常温下吸附容量可达0.235 g·g^-1; IDAA-PGMA/SiO₂对重金属离子的吸附过程为一放热过程, 且为焓驱动的过程, 升高温度, 吸附容量降低; 对稀土离子的吸附过程则为熵驱动的过程; 在可抑制金属离子水解的pH范围内, 介质的pH值越高, IDAA-PGMA/SiO₂的螯合吸附能力越强; IDAA-PGMA/SiO₂对重金属离子的吸附容量远高于对稀土离子的吸附容量.     

Polystyrene‐Core–Silica‐Shell Hybrid Particles Containing Gold and Magnetic Nanoparticles

Polystyrene‐core–silica‐shell hybrid particles were synthesized by combining the self‐assembly of nanoparticles and the polymer with a silica coating strategy. The core–shell hybrid particles are composed of gold‐nanoparticle‐decorated polystyrene (PS‐AuNP) colloids as the core and silica particles as the shell. PS‐AuNP colloids were generated by the self‐assembly of the PS‐grafted AuNPs. The silica coating improved the thermal stability and dispersibility of the AuNPs. By removing the “free” PS of the core, hollow particles with a hydrophobic cage having a AuNP corona and an inert silica shell were obtained. Also, Fe₃O₄ nanoparticles were encapsulated in the core, which resulted in magnetic core–shell hybrid particles by the same strategy. These particles have potential applications in biomolecular separation and high‐temperature catalysis and as nanoreactors.