激光剥蚀电感耦合等离子体质谱鉴别蓝色圆珠笔色痕

建立了法庭科学中蓝色圆珠笔色痕的激光剥蚀电感耦合等离子体质谱鉴别方法。对95种不同来源的蓝色圆珠笔进行了分析,依据所含金属元素种类的差别将95种圆珠笔分为34类,其中26类圆珠笔根据元素种类的差别可直接区分,其余8类依据元素间响应值之比进行区分,对字痕载体纸张的考察结果表明了纸张对检测结果无影响。实验结果表明方法重现性良好,精密度10%,与传统分析技术相比,本方法可获得更好的鉴别结果,95种蓝色圆珠笔中有88种可使用该方法有效鉴别。该方法简便快速、精密度良好、对样本宏观无损,适合法庭科学对蓝色圆珠笔鉴定的需要。     

激光剥蚀-电感耦合等离子体质谱测定植物样品中的元素

采用193 nm准分子激光剥蚀-电感耦合等离子体质谱(LA-ICP-MS)对标准植物粉末样品(GBW07602-GBW07603灌木枝叶、GBW07604杨树叶、GBW07605茶叶、GBW08514烟草)中13种元素(Li,B,Na,Mg,Al,K,Ca,Cr,Mn,Fe,Ni,Cu,Ba)进行定量测试.向植物粉末样...     

Trace element determinations in uranium by total reflection X‐ray fluorescence spectrometry using polychromatic X‐ray excitation

Suitability of polychromatic X‐rays has been assessed for the total reflection X‐ray fluorescence (TXRF) trace elemental determinations in aqueous solutions as well as uranium oxide certified reference materials. The method involves total reflection of X‐rays below a certain energy level on the TXRF sample support and exciting the analytes present in ng amount on these supports, measuring the TXRF spectra, processing the spectra, and finally determining the elemental concentrations. For uranium‐based samples, the samples were dissolved, main matrix uranium was separated from these solutions using solvent extraction, and trace elements were determined using aqueous phase following above approach. The method is simple and easier to implement compared with the monochromatic excitation but has similar or in some cases better detection limits compared with those obtained using monochromatic excitation. The details of the methodology, quality of analytical results, and detection limits are described and compared with those obtained using monochromatic excitation. Copyright © 2017 John Wiley & Sons, Ltd.     

Investigation of heavy-metal accumulation in selected plant samples using laser induced breakdown spectroscopy and laser ablation inductively coupled plasma mass spectrometry

Single-pulse Laser-Induced Breakdown Spectroscopy (LIBS) and Laser-Ablation Inductively Coupled Plasma Mass-Spectrometry (LA-ICP-MS) were applied for mapping the silver and copper distribution in Helianthus Annuus L. samples treated with contaminant in controlled conditions. For Ag and Cu detection the 328.07 nm Ag(I) and 324.75 nm Cu(I) lines were used, respectively. The LIBS experimental conditions (mainly the laser energy and the observation window) were optimized in order to avoid self-absorption effect in the measured spectra. In the LA-ICP-MS analysis the Ag 107 and Cu 63 isotopes were detected. The capability of these two analytical techniques for high-resolution mapping of selected trace chemical elements was demonstrated.     

X‐ray fluorescence spectrometry in Dar es Salaam

Energy‐dispersive x‐ray fluorescence (EDXRF) analysis has been established at the University of Dar es Salaam, Faculty of Science, Department of Physics. Calibration was conducted using thin films from Micromatter (USA) for secondary target XRF. We report on the performance of the spectrometer including the detection limits attained, which range from 0.01 to 10 ng cm^?2 using collimators of 6 and 8 mm diameter under excitation conditions of 50 kV, 35 mA. The accuracy of the measurements was checked using IAEA SOIL‐7 and NIST 3087a Certified Reference Materials. The experimental values differed by <5% from the certified values. The total reflection x‐ray fluorescence (TXRF) facility added as a module to the existing XRF system provides detection limits between 0.1 and 100 pg for most of the elements measured. Copyright © 2005 John Wiley & Sons, Ltd.     

Effect of the matrix in mass spectrometry using an inductively coupled plasma

Using different types of devices, we have performed an experimental study of matrix ionization effects manifesting themselves in the method of mass spectrometry with an inductively coupled plasma. Basic laws governing these effects have been established. The composition of the analytical zone of the plasma and possible attenuation of the signal from the analyte on introduction of a matrix element due to processes occurring in the plasma and in the ion beam have been determined theoretically. A high degree of coincidence between experimental and calculated results is shown. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 5, pp. 768–774, September–October, 1998.     

Medieval glass from the Cathedral in Paderborn: a comparative study using X-ray absorption spectroscopy, X-ray fluorescence, and inductively coupled laser ablation mass spectrometry

We have investigated four stained glass samples recovered from an archaeological excavation at the Cathedral in Paderborn (Germany) between 1978 and 1980. On two of the samples there are parts of paintings. Concentrations of major elements were determined using two independent techniques: LA–ICP–MS (a UV laser ablation microsampler combined with an inductively coupled plasma mass spectrometer) and synchrotron radiation X-ray excited X-ray fluorescence (SR-XRF). The SR-XRF data were quantified by using the program package PyMCA developed by the software group of the ESRF in Grenoble. Significant differences were found between the concentrations determined by the two techniques that can be explained by concentration gradients near the surface of the glasses caused, for example, by corrosion/leaching processes and the different surface sensitivities of the applied techniques. For several of the elements that were detected in the glass and in the colour pigments used for the paintings X-ray absorption near edge structure (XANES) spectra were recorded in order to determine the chemical speciation of the elements of interest. As was expected, most elements in the glass were found as oxides in their most stable form. Two notable exceptions were observed: titanium was not found as rutile—the most stable form of TiO₂—but in the form of anatase, and lead was not found in one defined chemical state but as a complex mixture of oxide, sulphate, and other compounds.     

Identification of mineral inclusions in archaeological ceramics using microbeam X‐ray fluorescence spectrometry

Archaeological ceramics are subjected to chemical and geochemical analyses in order to ascertain production techniques and provenance. Many analytical techniques are currently available for the determination of qualitative and quantitative characteristics pertaining to clay composition and structure. Microbeam XRF is utilised in this report to analyse mineral inclusions present in Mleiha ceramics in order to establish better provenance data. A total of 67 mineral inclusions of different sizes and colours were analysed. The majority of the sampled inclusions (94%) were silicates, and only 6% were calcites. A total of 35 inclusions from the former group were olivine minerals composed of a mixture of Mg, Si, and Fe oxides constituting 87–99% of the inclusions' mass, in addition to 13 inclusions composed mainly of Al, Si, and Ca oxides with sum concentrations ranging from 80% to 98%. Copyright © 2014 John Wiley & Sons, Ltd.     

Microdistribution of lead in human teeth using microbeam synchrotron radiation X‐ray fluorescence (μ‐SRXRF)

Lead (Pb) exposure is known to be associated with adverse effects on human health, especially during the prenatal period and early childhood. The Pb content in teeth has been suggested as a useful biomarker for the evaluation of cumulative Pb exposure. This study was designed to employ the microbeam synchrotron radiation X‐ray fluorescence technique to determine the microdistribution of Pb within the tooth to evaluate the reliability of the technique and the effectiveness of tooth Pb as a biomarker of Pb exposure. The results showed that in the incisor sample, Pb primarily deposited in secondary dentine region close to the pulp and secondarily at enamel exterior. In addition, Pb colocalised with Zn, indicating a positive correlation between Pb and Zn. By contrast, in the two molar samples, Pb accumulated principally in the pulp, and secondarily in the enamel. At the same time, Pb in these two molar samples colocalised with Ca instead of Zn as was observed in the incisor sample. Several batches of line scans further confirmed the conclusions. The feasibility of using microbeam synchrotron radiation X‐ray fluorescence to determine the microdistribution of Pb in teeth and of using the tooth Pb, especially in dentine, as a biomarker was discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

A comparative study on the total reflection X‐ray fluorescence determination of low Z elements using X‐ray tube and synchrotron radiation as excitation sources

Detailed total reflection X‐ray fluorescence (TXRF) studies for the detection and quantification of low atomic number elements were carried out by using a laboratory dual source TXRF spectrometer equipped with a vacuum chamber and at the International Atomic Energy Agency multi‐purpose end‐station facility, operated at the XRF beamline of Elettra Sincrotrone Trieste, Italy. Multi‐elemental standard aqueous solutions of low Z elements (F, Na, Al, S, K, Sc, and Ti) with different elemental concentrations of 2, 10, 20, and 30 µg/ml were prepared and measured in both setups. The measurements at the synchrotron setup were performed in a scanning mode across the sample residue and perpendicular to the incident beam in order to account properly for a possible non‐uniform deposition of certain elements. The accuracy and the detection limits obtained from the TXRF measurements in both setups were determined and comparatively evaluated and assessed. Significant improvement in the TXRF detection limits at the synchrotron beamline end‐station was obtained for the elements with Z ≤ 13 (Al). Copyright © 2017 John Wiley & Sons, Ltd.     

凝胶电泳与激光剥蚀-电感耦合等离子体质谱联用测定蛋白质中微量元素的应用进展

介绍了凝胶电泳(GE)和激光剥蚀-电感耦合等离子体质谱(LA-ICP-MS)联用测定蛋白质中微量元素的方法,对蛋白质分离、凝胶处理,包括染色及干燥,和检测过程中的定量校正等技术问题做了详述,并综述了LA-ICP-MS在硒蛋白、磷酸化蛋白及金属蛋白分析中的应用,指出了这种方法在蛋白质中微量元素检测中存在的问题和发展方向。     

Spectroscopic investigations on kidney stones using Fourier transform infrared and X‐ray fluorescence spectrometry

Kidney stone is the most painful and prevalent urological disorder of the urinary system throughout the world. Thus, analysis of kidney stones is an integral part in the evaluation of patents having stone disease. Spectroscopic investigations of stones provide an idea about the pathogenesis of stones for its better cure and treatment. Hence, the present work targets multispectroscopic investigations on kidney stones using Fourier transform infrared (FTIR) and wave dispersive X‐ray fluorescence (WD‐XRF) spectroscopy which are the most useful analytical methods for the purpose of bio‐medical diagnostics. In the present study, FTIR spectral method is used to investigate the chemical composition and classification of kidney stones. The multicomponents of kidney stones such as calcium oxalate, hydroxyl apatite, phosphates, carbonates, and struvite were investigated and studied. Qualitative and quantitative determination of major and trace elements present in the kidney stones was performed employing WD‐XRF spectroscopy. The wide range of elements determined in the kidney stones were calcium (Ca), magnesium (Mg), phosphorous (P), sodium (Na), potassium (K), chlorine (Cl), sulfur (S), silicon (Si), iodine (I), titanium (Ti), iron (Fe), ruthenium (Ru), zinc (Zn), aluminum (Al), strontium (Sr), nickel (Ni), copper (Cu), and bromine (Br). For the first time, ruthenium was detected in kidney stone samples employing WD‐XRF in very low concentration. Our results revealed that the presence and relative concentrations of trace elements in different kinds of stones are different and depend on the stone types. From the experiments carried out on kidney stones for trace elemental detection, it was found that WD‐XRF is a robust analytical tool that can be useful for the diagnosis of urological disorders. We have also compared our findings with the results reported using XRF technique. The results obtained in the present paper show interesting prospects for FTIR and WD‐XRF spectrometry in nephrolithiasis. Copyright © 2017 John Wiley & Sons, Ltd.     

Determination of effective atomic numbers and mass attenuation coefficients of samples using in‐situ energy‐dispersive X‐ray fluorescence analysis

The matrix effect has a major impact on energy‐dispersive X‐ray fluorescence analysis (EDXRFA) and is difficult to be evaluated due to that the contents of some low‐atomic‐number elements cannot be identified by in‐situ EDXRFA. Up to today, the fundamental parameter algorithm proposed by Rousseau has been widely applied to correct the matrix effect. Accordingly, determining the matrix and mass attenuation coefficient (μ/ρ) of sample is a key issue for the fundamental parameter algorithm. In present work, the method to deduce μ/ρ by effective atomic number (Z_eff) was studied. First, the relationship between Z_eff and coherence to Compton scatting ratio (R) of the incident X‐ray was determined by standard samples. Then, we deduce Z_eff and their μ/ρ. The value of μ/ρ deduced by our method is in good agreement with that calculated by WinXCOM, and the relative change (Δ) is less than 7%. We also deduced Z_eff and their μ/ρ of Chinese national standard soil samples employing our method and good agreement with the calculated values were also obtained. We found that the agreement between experimental values of μ/ρ with theoretical values by WinXCOM still exists when the energy of the incident X‐ray is greater than 4 keV, and the Δ is less than 10%. The result indicates that our method may be applied directly to in‐situ EDXRFA.     

Microfluidic sample preparation for elemental analysis in liquid samples using micro X‐ray fluorescence spectrometry

The integration of microfluidic devices with micro X‐ray fluorescence (micro‐XRF) spectrometry offers a new approach for the direct characterization of liquid materials. A sample presentation method based on use of small volumes (<5 µl) of liquid contained in an XRF‐compatible device has been developed. In this feasibility study, a prototype chip was constructed, and its suitability for XRF analysis of liquids was evaluated, along with that of a commercially produced microfluidic device. Each of the chips had an analytical chamber which contained approximately 1 µl of sample when the device was filled using a pipette. The performance of the chips was assessed using micro‐XRF and high resolution monochromatic wavelength dispersive X‐ray fluorescence, a method that provides highly selective and sensitive detection of actinides. The intended application of the device developed in this study is for measurement of Pu in spent nuclear fuel. Aqueous solutions and a synthetic spent fuel matrix were used to evaluate the devices. Sr, which has its Kα line energy close to the Pu Lα line at 14.2 keV, was utilized as a surrogate for Pu because of reduced handling risks. Between and within chip repeatability were studied, along with linearity of response and accuracy. The limit of detection for Sr determination in the chip is estimated at 5 ng/µl (ppm). This work demonstrates the applicability of microfluidic sample preparation to liquid characterization by XRF, and provides a basis for further development of this approach for elemental analysis within a range of sample types. Copyright © 2014 John Wiley & Sons, Ltd.     

Optimization of L‐shell X‐ray fluorescence detection of lead in bone phantoms using synchrotron radiation

Closely related toxicity and retention mechanisms of lead (Pb) in the human body involve the bone tissues where Pb can accumulate and reside on a time scale ranging from years to tens of years. In vivo measurements of bone Pb can, therefore, play an important role in a comprehensive health risk assessment of Pb exposure. In vivo L‐shell X‐ray fluorescence (LXRF) measurement of bone Pb was first demonstrated over 4 decades ago. Implementation of the method, however, encountered challenges associated with low sensitivity and calibration procedure. In this study, the LXRF measurement was optimized by varying the incident photon energy and the excitation‐detection geometry. The Canadian Light Source synchrotron radiation was used to compare 2 different excitation‐detection geometries of 90^° and 135^° using 3 different X‐ray photon energies: 15.8, 16.6, and 17.5 keV. These energies optimized excitation of the L₃ subshell of Pb and simulated the most intense K‐shell emissions of zirconium, niobium, and molybdenum, respectively. Five rectangular plaster‐of‐Paris bone phantoms with Pb concentrations of 0, 7, 17, 26, and 34 μg/g, and one rectangular 3.1‐mm‐thick resin phantom mimicked the X‐ray attenuation properties of human bone and soft tissue, respectively. Optimal LXRF detection was obtained by the 15.8‐keV energy and the 90^° and 135^° geometries for the bare bone and the bone and soft tissue phantoms, respectively.     

Investigation of cadmium accumulation mechanism in hepatopancreas of Patinopecten yessoensis by synchrotron radiation X‐ray absorption fine structure and synchrotron radiation X‐ray fluorescence analyses

Chemical state of cadmium in a hepatopancreas of a scallop (Patinopecten yessoensis) was studied by means of synchrotron radiation‐based X‐ray analytical techniques. X‐ray absorption fine structure (XAFS) and X‐ray fluorescence (XRF) imaging were used to identify the chemical state and the distribution of cadmium in the hepatopancreas, respectively. The results of in vivo Cd K‐edge XAFS suggested that the neighboring atoms of the cadmium in the hepatopancreas are of sulfur. Therefore, we propose that cadmium was accumulated by a metalloprotein with sulfur. Micro XRF imaging of thin sections of the hepatopancreas showed that cadmium is distributed on the surface of intestinal epithelia and concentrated in the internal tissue of the hepatopancreas. These results indicated that scallops accumulate cadmium inside the hepatopancreas through the intestinal epithelium.     

Determination of residual metal concentration in metallurgical slag after acid extraction using total reflection X‐ray fluorescence spectrometry

Total reflection X‐ray fluorescence spectrometry (TXRF) was used to determine residual metal content in metallurgical slag after sulfuric acid extraction. A slag sample provided by a copper smelter industry and submitted to a recycling process with the aim of extracting valuable metals was analyzed. Slurry sampling was evaluated as a simple sample preparation procedure for the determination of major (Si, Fe, K, Ca) and trace elements (Ti, Ni, Cu, Zn, As, Pb, Sr, Rb, Mn) in two certified reference materials (lake and river sediments) to evaluate the accuracy of the procedure. Precision was evaluated as relative standard deviation (%) of three replicates, being usually lower than 10%. Detection limits were in the range of 1.1–1079 µg g^?1. Additionally, it was evaluated to use Si – a major component of the slag – as intrinsic reference to determine residual elements in the slag residues. A two‐element internal standard (Ga + P) was employed to determine all the elements. Ga was used as internal standard for the determination of elements from K to Pb, and P was required for the quantification of Si. The optimal procedure of slurry sampling was applied for the analysis of the original metallurgical slag and the solid residues. It was found that As and Pb are accumulated in the slag, whereas Cu, Zn, and Fe are extracted to a percentage >90% from the slag. This was confirmed by analysis of the sulfuric acid extracts of the metallurgical slag. Copyright © 2014 John Wiley & Sons, Ltd.     

A facile heating cell for in situ transmittance and fluorescence X‐ray absorption spectroscopy investigations

A facile heating cell has been designed for in situ transmittance and fluorescence X‐ray absorption spectroscopy (XAS) measurements up to 1273 K under vacuum or an inert atmosphere. These high temperatures are achieved using a tantalum heating element by ohmic heating. Because of the small specific heat capacity, the temperature can be changed in a matter of minutes from room temperature to high temperature. Furthermore, a commercial power controller was adapted to provide stable temperature control. The construction of the heat shielding system provides a novel approach to reducing the beam's path length and the cell's size. The cell is inexpensive and easy to build. Its performance was evaluated by in situ XAS measurements of the temperature‐dependent structure of ceria nanocrystals. Some preliminary results for the structural mechanism in ceria nanocrystal redox applications are given.     

Activities in the IAEA X‐ray fluorescence laboratory at Seibersdorf

This paper describes the specific philosophy behind the functioning of the IAEA XRF Laboratory at Seibersdorf and its role in the XRF community. Some examples of the research and development activities and the results obtained are given. They include methodological development and construction of XRF instruments in order to extend the applicability range of the XRF technique, particularly in support of applications of the analytical technique in developing IAEA member states. The contribution of the laboratory to the training in methodology and applications of XRF techniques and to development of QA/QC procedures is also emphasised. Copyright © 2006 John Wiley & Sons, Ltd.