首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 15 毫秒
1.
Cobalt molybdenum compounds are important catalytic materials in many processes, e.g. in splitting of ammonia to form CO free hydrogen fuel. We here report on deposition of such cobalt molybdenum oxides by atomic layer deposition (ALD) using different types of metal precursors CoCp(2) (Cp = cyclopentadienyl), Co(thd)(2) (Hthd = 2,2,6,6-tetramethylheptan-3,5-dione), Mo(CO)(6) and oxygen precursors O(3), H(2)O, and (O(3) + H(2)O). The growth dynamics have been investigated using quartz crystal microbalance (QCM) methods. It is evident that mixing of the different precursor chemistries affect the growth patterns. When water is introduced to the reactions, a surface controlled mechanism takes place which guides the deposited stoichiometry towards the CoMoO(4) phase over a wide range of cobalt rich pulsed compositions. This is a rare example of how surface chemistry can control stoichiometry of depositions in ALD. The deposited films have been investigated by X-ray diffraction, Raman spectroscopy and atomic force microscopy. The catalytic activity of selected films have been characterized by temperature programmed ammonia decomposition, proving the films to be catalytically active and lowering the decomposition temperature by some 200 °C.  相似文献   

2.
This overview describes the results of our recent study of the application of electrochemical nanotechnology to the fabrication of magnetic recording materials, interconnects in ultra-large-scale integrated (ULSI) devices, energy storage materials, and on-chip biosensors. It is important to note that electrochemical processes play significant roles in developing and fabrication such sophisticated materials and devices. In the field of magnetic recording, electrodeposition methods for preparing CoNiFe and CoFe soft magnetic thin films with a high saturation magnetic flux density were newly developed, and the significant issues for obtaining those films are highlighted. In the area of ULSI interconnects, we developed a technique using a self-assembled monolayer (SAM) for direct bonding of the interconnect layer to SiO2, and proposed a novel electroless deposition method for fabricating a diffusion barrier layer. In the field of batteries, electrodeposited SnNi alloy was proposed as a future anode material for Li batteries, and electrochemical MEMS processes were shown to be useful for fabricating micro-sized direct methanol fuel cells (DMFCs) as portable batteries for electronics applications. In the area of chemical sensors, we developed a new process for fabricating field effect transistors (FETs) modified with SAMs for on-chip biosensing applications.  相似文献   

3.
Cathodic electrophoretic deposition (EPD) method has been developed for the deposition of manganese dioxide films. It was shown that phosphate ester (PE) is an effective charging additive, which provides stabilization of manganese dioxide nanoparticles in suspensions. The influence of PE concentration and deposition voltage on the deposition efficiency has been studied. EPD has been utilized for the fabrication of porous nanostructured films with thickness in the range of 0.5–20 μm for application in electrochemical supercapacitors (ES). Cyclic voltammetry and chronopotentiometry data for the films tested in the 0.1 M Na2SO4 solutions showed capacitive behavior in the voltage window of 1 V. The highest specific capacitance (SC) of 377 F g−1 was obtained at a scan rate of 2 mV s−1. The SC decreased with increasing film thickness and increasing scan rate in the range of 2–100 mV s−1. The deposition mechanism, kinetics of deposition and charge storage properties of the films are discussed.  相似文献   

4.
5.
6.
We have immobilized DNA on a glassy carbon electrode (GCE) modified with graphene oxide (GO) to develop an electrochemical biosensor for catechol. Compared to carbon nanotubes, the use of GO dramatically improved the electrooxidative current of the guanine and adenine moieties in DNA but retained the low background current of unmodified GCEs. Factors such as DNA adsorption time, DNA concentration and pH of solution were investigated to optimize experimental conditions. In the presence of catechol, the voltammetric response to DNA was inhibited due to the interaction between DNA and catechol. The response to adenine is linearly proportional to the concentration of catechol in the range from 1.0?×?10?6 to 1.0?×?10?4 mol·L?1. If catechol is degraded by the combined action of UV light and hydrogen peroxide, the response to DNA is restored. Thus, the modified electrode can act as an efficient biosensor for monitoring the degradation of catechol.
Figure
GO dramatically improved the electrooxidative current of the guanine and adenine moieties in DNA but retained the low background current of unmodified GCEs. While the DNA/GO-modified electrode was applied to monitor catechol, it showed sensitive response to catechol before and after photodegradation treatment.  相似文献   

7.
In this article, we report a bioinspired approach to preparing stable, functional multilayer films by the integration of mussel-inspired catechol oxidative chemistry into a layer-by-layer (LbL) assembly. A polyanion of poly(acrylic acid-g-dopamine) (PAA-dopamine) bearing catechol groups, a mussel adhesive protein-mimetic polymer, was synthesized as the building block for LbL assembly with poly(allylamine hydrochloride) (PAH). The oxidization of the incorporated catechol group under mild oxidative condition yields o-quinone, which exhibits high reactivity with amine and catechol, thus endowing the chemical covalence and retaining the assembled morphology of multilayer films. The cross-linked films showed excellent stability even in extremely acidic, basic, and highly concentrated aqueous salt solutions. The efficient chemical cross-linking allows for the production of intact free-standing films without using a sacrificial layer. Moreover, thiol-modified multilayer films with good stability were exploited by a combination of thiols-catechol addition and then oxidative cross-linking. The outstanding stability under harsh conditions and the facile functionalization of the PAA-dopamine/PAH multilayer films make them attractive for barriers, separation, and biomedical devices.  相似文献   

8.
Catechol and spiropyran functional groups were conjugated to a polymer backbone, allowing immobilization on polystyrene beads (PS beads). The final product was capable of stably reproducing the optical properties of spiropyran. Through the outstanding surface adhesion properties of the catechol functional group, spiropyran was immobilized on PS beads. Switchable photoluminescence in the spiropyran coated PS bead surfaces was observed depending on irradiation with either UV or visible light. The surfaces of the PS beads were morphologically examined by field emission scanning electron microscopy and X‐ray photoelectron spectroscopy was used for characterization of the constituent atoms. Furthermore, UV–Vis and fluorescence spectroscopy were used to confirm conversion between the spiropyran (SP) and merocyanine (MC) forms through UV or visible light irradiation on SP, while fluorescent images for both SP and MC were studied using confocal laser scanning microscopy. The confocal images of the SP‐PS beads system onto MDAMB‐231 cells under UV and visible light indicate the cellular uptake by emerging color within the cytoplasm. Advancing study, the remaining catechol groups can confers adhesive properties, given by contact angle data of various coated surfaces film. These stimuli‐responsive coatings are compatible as drawing switchable photochromic material on versatile substrate shown in confocal images of propylene film. Overall, this great water solubility and biocompatibility PS beads system also showed potential as cell bio‐imaging light stimuli responsive material, and the benefits of this system can also possibly address coat able advanced material for a wide range of surface light sensor applications. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

9.
Polyaniline-iron oxide magnetic nanohybrid was synthesized and characterized using various spectroscopic, microstructural and electrochemical techniques. The smart integration of Fe3O4 nanoparticles within the polyaniline (PANI) matrix yielded a mesoporous nanohybrid (Fe3O4@PANI) with high surface area (94 m2 g−1) and average pore width of 12.8 nm. Catechol is quasi-reversibly oxidized to o-quinone and reduced at the Fe3O4@PANI modified electrodes. The amperometric current response toward catechol was evaluated using the nanohybrid and the sensitivity and detection limit were found to be 312 μA μL−1 and 0.2 nM, respectively. The results from electrochemical impedance spectroscopy (EIS) indicated that the increased solution resistance (Rs) was due to elevated adsorption of catechol on the modified electrodes. Photoluminescence spectra showed ligand-to-metal charge transfer (LMCT) between p-π orbitals of the phenolate oxygen in catechol and the d-σ* metal orbital of Fe3O4@PANI nanohybrid. Potential dependent spectroelectrochemical behavior of Fe3O4@PANI nanohybrid toward catechol was studied using UV/vis/NIR spectroscopy. The binding activity of the biomagnetic particles to catechol through Brownian relaxation was evident from AC susceptibility measurements. The proposed sensor was used for successful recovery of catechol in tap water samples.  相似文献   

10.
A 6-μm-thick, dense, and uniform yttria-stabilized zirconia (YSZ) thin-film electrolyte for solid oxide fuel cell was able to be formed, via aqueous electrophoretic deposition, onto a porous Ni-YSZ cermet anode, which was made via attrition mill, pressure casting, and pressureless sintering. Nonconductive yet suitably porous substrates could be used for electrophoretic deposition, with the help of an auxiliary electrode. Ni/YSZ cermet presintered at 1,200 °C and reduced at 700 °C, on the other hand, behaved like a metal electrode and required no more the use of such an auxiliary electrode. It was also found that the deposition rate increased with increasing current density and with decreasing NH4-polyacrylate concentration.  相似文献   

11.
12.
The controlled electrophoretic deposition of polystyrene/divinylbenzene (PS/DVB) star polymer films from a colloidal suspension is reported. Liquid suspensions, containing the PS/DVB star polymer, were prepared by injecting a dichloromethane (DCM) solution of the star polymer into a stratified liquid combination of hexane and DCM. A variety of hexane/DCM volume ratios were examined to identify the optimal solution conditions for electrophoretic deposition; thin films were produced from both unmixed and well-mixed hexane/DCM suspensions. Unmixed suspensions yielded spatially separated thin films, deposited in a controlled fashion, that were dependent on the polarity of the corresponding electrode. Films on the positive electrode differed in thickness, microstructure, and appearance from those formed on the negative electrode. In contrast, films produced from well-mixed hexane/DCM suspensions deposited uniformly across only the negative electrode. Atomic force microscopy studies revealed nanostructured surface morphologies that were unique to each of these films. Additionally, these microscopy studies shed light on the possible conformations of star polymers adsorbed on a surface. By controlling the composition and the mixing state of the solution and by controlling the bias of electrodes, we achieved controlled deposition of star polymer films with a specific nanostructure. These nanostructured films may have broad use in optical and biological device applications.  相似文献   

13.
Thin films of PdO obtained by thermal oxidation of Pd films in air in the temperature range of 240–800°C were characterized using fast electron diffraction, transmission electron microscopy, and optical spectroscopy. The PdO films were found to be non-stoichiometric. With increasing oxidation temperature, the deviation of the PdO film composition from the stoichiometric component ratio becomes less pronounced. The resistivity response of PdO films to the presence of ozone in air was studied for the first time and good prospects for using this material for gas sensors are demonstrated.  相似文献   

14.
Seeman NC 《Chemistry & biology》2003,10(12):1151-1159
Structural DNA nanotechnology consists of combining unusual DNA motifs by specific structurally well-defined cohesive interactions (primarily sticky ends) to produce target materials with predictable 3D structures. This effort has generated DNA polyhedral catenanes, robust nanomechanical devices, and a variety of periodic arrays in two dimensions. The system has been used to produce specific patterns on the mesoscale through designing and combining specific DNA strands, which are then examined by atomic force microscopy. The combination of these constructions with other chemical components is expected to contribute to the development of nanoelectronics, nanorobotics, and smart materials. The organizational capabilities of structural DNA nanotechnology are just beginning to be explored, and the field is expected ultimately to be able to organize a variety of species that will lead to exciting and possibly revolutionary materials.  相似文献   

15.
16.
A substrate-independent method has been devised for ring formation at solid surfaces. This entails the aminolysis reaction of allylamine with maleic anhydride pulsed plasma polymer films to yield terminal alkene groups at the surface. Subsequent exposure to 1,3-cyclohexadiene leads to a Diels-Alder type (4 + 2) cycloaddition reaction to give a mixture of endo- and exo-bicyclo[2.2.2]oct-2-ene rings.  相似文献   

17.
Highly pure aluminum specimens (99.99%) after electropolishing and DC-etching were covered with SiO2 films by electrophoretic sol-gel coating and were anodized in neutral boric acid/borate solutions. Time-variations in cell voltage during electrophoretic sol-gel coating and in anode potential during anodizing were monitored. Structure and dielectric properties of the anodic oxide films were examined by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray (EDX), and electrochemical impedance spectroscopy (EIS). It was found that electrophoretic sol-gel coating forms uniform SiO2 films on the surface of both electropolished and DC-etched specimens. Anodizing of specimens after electrophoretic coating lead to the formation of anodic oxide films consisting of two layers: an inner alumina layer and an outer Al–Si composite oxide layer. The anodic oxide films formed, thus, had slightly higher capacitances than those formed on aluminum without any coating. Higher heating temperatures after electrophoretic deposition caused the increase in capacitance of anodic oxide films more effectively. Anodizing in a boric acid solution after SiO2 coating on DC-etched foil allowed the anode potential to reach a value higher than 1,000 V, resulting in 39% higher capacitances than those on specimens without SiO2 film. Dedicated to Professor Su-Il Pyun on the occasion of his 65th birthday.  相似文献   

18.
制备了用于测定邻苯二酚的单壁碳纳米管-氧化石墨烯复合修饰玻碳电极.用循环伏安法研究了邻苯二酚在该电极上的电化学行为.结果表明,该修饰电极对邻苯二酚具有良好的电催化性能.在最佳实验条件下,采用差分脉冲伏安法对邻苯二酚进行了测定,其氧化峰电流与邻苯二酚浓度在2×10~(-6)~1×10~(-4) mol/L范围内呈线性关系,相关系数为0.996 2,检出限为4×10~(-7) mol/L.该电极具有良好的重现性,用于模拟废水中邻苯二酚的测定结果令人满意.  相似文献   

19.
The surface chemistry of VP mixed oxides has been investigated by ESR, UV and Vis spectroscopy. The results are correlated with the yield of maleic anhydride in the oxidation of 1-butene. High yields of maleic anhydride are observed for catalysts that contain V5+ and V4+.
VP , . 1-. , V+5 V+4.


This work was sponsored by CNR Italy  相似文献   

20.
The elaboration of nanoparticles designed for technological applications in various fields such as catalysis, optics, magnetism, electronics… needs the strict control of their characteristics, especially chemical composition, crystalline structure, size, and shape. These characteristics bring the physical properties (color, magnetism, band gap…) of the material, and also the surface to volume ratio of particles which is of high importance when they are used as a chemically active or reactive support, in catalysis for instance. The nanoparticles may have also to be surface functionalized by various species, and/or dispersed in aqueous or non aqueous media. We will show that the aqueous chemistry of metal cations is a very versatile and attractive way for the design of oxide nanomaterials, allowing the control of size, shape, and crystalline structure for polymorphic materials. Aqueous surface chemistry, including adsorption of various species, may be used to modify the morphology of nanoparticles. In some cases, redox processes can be involved to control the morphology of nanoparticles. Technologically important nanomaterials such as titania, alumina, and iron oxides are studied.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号