White light-emitting Mg0.1Sr1.9SiO4:Eu phosphors

Divalent europium-activated strontium orthosilicate Sr₂SiO₄:Eu²⁺ and Mg_0.1Sr_1.9SiO₄:Eu²⁺ phosphors were synthesized through the solid-state reaction technique. Their luminescent properties under ultraviolet excitation were investigated. The X-ray diffraction (XRD) results show that these phosphors are of α′-Sr₂SiO₄ phase with a trace of β-Sr₂SiO₄. Doping of Eu²⁺ ion into the crystal lattice results in the lattice constant being expended, while Mg²⁺ makes the lattice constant shrinking. A solid solution with the same crystal structure is formed when Eu²⁺ or Mg²⁺ substitutes part of Sr²⁺ ions and occupies the same lattice sites. The Sr₂SiO₄:Eu²⁺ phosphors show two emission spectra peaked at 535 and 473 nm originated from the 5d-4f transition of Eu²⁺ ion doped in two different Sr²⁺ sites in the host lattice. By substitution of 0.1 mol of Sr²⁺ with Mg²⁺, these two emission bands are tuned to be in the blue and yellow region (459 and 564 nm for Mg_0.1Sr_1.88SiO₄:Eu_0.02), respectively. The tuning effect is discussed. With a combination of the blue and yellow emission bands the phosphors show white color, indicating that these phosphors may become promising phosphor candidates for white light-emitting diodes (LEDs).     

A novel red-emitting phosphor Ca9Bi(PO4)7:Eu3+ for near ultraviolet white light-emitting diodes

Red phosphors Ca₉Bi_1-x(PO₄)₇:xEu³⁺ (x = 0.06, 0.10, 0.20, 0.30, 0.40, 0.50, 0.60, 0.70, 0.80 and 1.00) were synthesized by a conventional solid-state reaction (SSR) route. The X-ray diffraction patterns, photoluminescence spectra, ultraviolet–visible reflection spectroscopy, decay time and the International Commission on Illumination (CIE) chromaticity coordinates of these compounds were characterized and analyzed. The Eu-doped Ca₉Bi(PO₄)₇ phosphors exhibited strong red luminescence which peaks located at 615 nm due to the ⁵D₀→⁷F₂ electric dipole transition of Eu³⁺ ions after excitation at 393 nm. Ultraviolet–visible spectra indicated that the band-gap of Ca₉Bi_0.30(PO₄)₇:0.70Eu³⁺ is larger than that of Ca₉Bi(PO₄)₇. The results indicate that the phosphor Ca₉Bi_0.30(PO₄)₇:0.70Eu³⁺ can be a suitable red-emitting phosphor candidate for LEDs.     

Luminescent properties of Eu-activated Sr3B2SiO8: A red-emitting phosphor for white light-emitting diodes

Single-phased Sr₃B₂SiO₈:Eu³⁺ phosphor was prepared by a solid-state method at 1020 °C. The luminescence spectra showed that Sr₃B₂SiO₈:Eu³⁺ phosphor can be effectively excited by near ultraviolet light (393 nm) and blue light (464 nm). When excited at 393 or 464 nm Sr₃B₂SiO₈:Eu³⁺ exhibited the main emission peaks at 611 and 620 nm, which resulted from the supersensitive ⁵D₀→⁷F₂ transition of Eu³⁺. The luminescence intensity of Sr₃B₂SiO₈:Eu³⁺ at 611 and 620 nm reached the maximum when the doping content of Eu³⁺ was 4.5 mol%. Its chromaticity coordinates (0.646, 0.354) were very close to the NTSC standard values (0.67, 0.33). Thus, Sr₃B₂SiO₈:Eu³⁺ is considered to be an efficient red-emitting phosphor for long-UV InGaN-based light-emitting diodes.     

Eu-Mn energy transfer in white-light-emitting T-phase (Ba,Ca)2SiO4:Eu, Mn phosphor

White-light-emitting T-phase Eu²⁺/Mn²⁺-codoped (Ba, Ca)₂SiO₄ phosphors are achieved in terms of the energy transfer between Eu²⁺ and Mn²⁺ ions. All spectra consist of the relatively broad green and the red emission bands, which thus result in a warm-white color with a color temperature of ∼4000 K. With increasing Eu²⁺ ions at fixed Mn²⁺ concentrations, a strong correlation between the luminescence and the electron paramagnetic resonance spectra is observed. This demonstrates that Eu²⁺ doping causes a perturbation of Mn²⁺ sites and the violation of their selection rules that enhances Mn²⁺-related emissions.     

An efficient and stable green phosphor SrBaSiO:Eu for light-emitting diodes

Eu²⁺-activated strontium–barium silicate, SrBaSiO₄:Eu²⁺, which is an intermediate phase between Sr₂SiO₄ and Ba₂SiO₄, was synthesized by a solid-state reaction. The synthesized phosphor was efficiently excited by a broad spectral range of near UV between 300 and 450 nm, and exhibited a strong and wide green emission. As the doped Eu²⁺ concentration increased from 0.005 to 0.18 (molar ratio), the emission wavelength shifted from 509 to 521 nm, and this red-shift phenomenon was discussed through a band-gap model. The concentration quenching mechanism was calculated to be a dipole–quadrupole interaction. It showed good thermal stability with T_1/2 of 170 °C and high internal quantum efficiency (78%). A green LED was fabricated with SrBaSiO₄:Eu²⁺and a 395 nm-emitting InGaN chip and it showed a superior current tolerant property. All the results indicate that this phosphor is a good candidate as green component in fabrication of phosphor-converted white LEDs.     

New red Y0.85Bi0.1Eu0.05V1−yMyO4 (M=Nb, P) phosphors for light-emitting diodes

The Y_0.85Bi_0.1Eu_0.05V_1−yM_yO₄ (M=Nb, P) as new near-ultraviolet excited phosphors were synthesized and their luminescence properties under 365 nm excitation were investigated in detail. It indicated that by doping small amount of P⁵⁺ into V⁵⁺ sites, the excitation intensity of charge transfer (CT) band of Bi–O (330–400 nm) was greatly improved. By substituting Nb⁵⁺ for V⁵⁺, both the CT bands of Bi–O and Eu–O (240–320 nm) were significantly enhanced. As a result, the emission intensity of Y_0.85Bi_0.1Eu_0.05V_1−yM_yO₄ (M=Nb, P) could be improved about 90% by doping 5 mol% P⁵⁺ and 110% by doping 5 mol% Nb⁵⁺. Comparing with the commercial Y₂O₂S:Eu³⁺ phosphors, the Y_0.85Bi_0.1Eu_0.05V_0.95M_0.05O₄ (M=Nb, P) phosphors exhibited excellent color purity and much higher brightness. The results showed that these Y_0.85Bi_0.1Eu_0.05V_1−yM_yO₄ (M=Nb, P) phosphors could be considered as promising red phosphors for application in LED.     

A potential reddish orange emitting phosphor Ca2BO3Cl:Eu for white light-emitting diodes

A series of phosphors Ca₂BO₃Cl:Eu³⁺ were synthesized by using a high-temperature solid-state reaction technique, and their UV–vis luminescence properties were investigated. The f–f transitions of Eu³⁺ in the host lattice were assigned and discussed. The excitation and emission spectra indicate that this phosphor can be effectively excited by ultraviolet (394 nm), and exhibit reddish orange emission corresponding to the ⁵D₀→⁷F_J (J=0, 1, 2) transitions of Eu³⁺. The influence of the doping concentration and charge compensators on the relative emission intensity of Eu³⁺ was investigated, and the optimum doping concentration is 0.04. The critical distance R_c was estimated to be 17.1 Å in terms of the concentration quenching data. The present study suggests that Ca₂BO₃Cl:Eu³⁺ can be a potential candidate as an UV-convertible phosphor for white light-emitting diodes (LEDs).     

Photoluminescence of Eu single doped and Eu/Dy codoped Sr2Al2SiO7 phosphors with long persistence

This paper reports the preparation of long persistent Sr₂Al₂SiO₇:Eu²⁺ and Sr₂Al₂SiO₇:Eu²⁺, Dy³⁺ phosphors and the comparison of their photoluminescent properties. The silicate phosphors prepared by solid-state reaction routine showed a broad blue emission peaking at 484 nm when activated by UV illumination. Such a bluish-green emission can be attributed to the intrinsic 4f-5d transitions of Eu²⁺. After the UV source was switched off, long persistent phosphorescence could be observed by naked eyes for both samples in darkness. Afterglow measurements revealed that Eu/Dy codoped phosphor possesses better afterglow properties than the Eu single doped one, since the maximum lifetime (τ_max=99 s) of the photons calculated from the decay profile is much larger than that of the Eu single doped phosphor (τ_max=82 s). TSL results suggested that the difference in afterglow properties was caused by the difference in the electron traps within the crystal lattice. For Eu/Dy codoped phosphor, the doping of Dy ions produced electron traps with trap depth of 0.52 eV, which is suitable and therefore leads to good persistence. However, in the case of Eu single doped phosphor, the trap depth is 0.88 eV, which is really too deep an energy barrier to overcome, and therefore a poor persistence was observed in the experiment.     

Concentration quenching of Eu in SrO·Al2O3:Eu phosphor

The luminescence of Eu²⁺ in alkaline earth aluminates of the type SrO·Al₂O₃ has been studied. In SrO·Al₂O₃:Eu²⁺ phosphor, green Eu²⁺ luminescence is observed from Eu²⁺ on the two different strontium sites present in the lattice. Their concentration quenching processes of the two inequivalent Eu²⁺ ions are investigated, respectively, and the corresponding concentration quenching mechanism is verified as dipole-dipole interaction. The value of the critical transfer distance is calculated.     

Highly luminescent red light phosphor CaTiO3:Eu under near-ultraviolet excitation

The Eu-doped CaTiO₃ particles with a good crystallinity were prepared via sol-gel method. The phosphors showed a strong red emission corresponding to ⁵D₀→⁷F₂ (618 nm) of Eu³⁺ under the near-ultraviolet excitation (400 nm). X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), photoluminescent (PL) analysis and Brunauer-Emmett-Teller (BET) specific surface area measurement were utilized to characterize the CaTiO₃:Eu³⁺ particles. The concentration quenching and thermal quenching of the samples were discussed as well. The optimal concentration and the calcination temperature were 16 mol% of Eu³⁺ and 1400 °C for these phosphors, and the possible reason was discussed as well. CaTiO₃:Eu³⁺ is a promising red phosphor under near-ultraviolet excitation for various applications.     

白光发光二极管用SrGdLiTeO_6:Eu~(3+)红色荧光粉的浓度猝灭和温度猝灭行为

采用高温固相法成功合成出双钙钛矿结构SrGd_(1-x)LiTeO_6:xEu~(3+)(x=0.1-1.0)红色荧光粉,并采用X-射线衍射、漫反射光谱、光致发光光谱、电致发光光谱等测试手段对粉体的结构、光致发光特性以及发光二极管器件的光色电特性进行了系统研究.激发光谱、发射光谱和荧光衰减曲线测试结果表明Eu~(3+)的最佳掺杂浓度为x=0.6,更大的掺杂量会引起浓度猝灭.基于van Uitert浓度猝灭公式,提出一种更准确的表达形式用于拟合、分析能量传递类型,揭示出电偶极-电偶极作用导致浓度猝灭.Judd-Ofelt理论计算得出较高的跃迁强度参数和量子效率,说明高度畸变的非心C_1晶体场促使高效的超灵敏跃迁红光发射.在423 K时积分发光强度达到室温时的85.2%,热激活能经计算为0.2941 eV.基于此样品的发光二极管能够发出明亮的红光.综上所述,该类荧光粉表现出良好的发光效率、色纯度以及发光热稳定性,是一种潜在的近紫外激发白光发光二极管用红色荧光粉.     

Double emitting phosphor NaSr4(BO3)3:Ce, Tb for near-UV light-emitting diodes

Blue and green double emitting phosphor, Ce³⁺ and Tb³⁺ co-doped NaSr₄(BO₃)₃, was synthesized in a weak reducing atmosphere by a conventional high temperature solid-state reaction technique. For comparison, Ce³⁺ or Tb³⁺ singly doped NaSr₄(BO₃)₃ was also prepared. The emission and excitation spectra of all samples have been investigated. NaSr₄(BO₃)₃:Tb³⁺ excitation includes a strong absorption at about 240 nm and some weak sharp lines in near-ultraviolet (n-UV) spectral region. The excitation of Ce³⁺ and Tb³⁺ co-doped NaSr₄(BO₃)₃ shows a strong broad band absorption in the n-UV region from the contribution of Ce³⁺, which makes it suitable for excitation by a n-UV LED chip. The emission of NaSr₄(BO₃)₃:Ce³⁺,Tb³⁺ consists of a blue emission band from Ce³⁺ and a green emission from Tb³⁺ under the excitation of n-UV light. Energy transfer between Ce³⁺ and Tb³⁺ is also discussed, and the relative intensity of blue emission and green emission could be tuned by adjusting the concentration of Ce³⁺ and Tb³⁺. The phosphor NaSr₄(BO₃)₃:Ce³⁺,Tb³⁺ could be considered as a double emission phosphor for n-UV excited white light-emitting diodes.     

Novel green-emitting Na2CaPO4F:Eu phosphors for near-ultraviolet white light-emitting diodes

In this study, green-emitting Na₂CaPO₄F:Eu²⁺ phosphors were synthesized by solid-state reactions. The excitation spectra of the phosphors showed a broad hump between 250 and 450 nm; the spectra match well with the near-ultraviolet (NUV) emission spectra of light-emitting diodes (LEDs). The emission spectrum showed an intense broad emission band centered at 506 nm. White LEDs were fabricated by integrating a 390 nm NUV chip comprising blue-emitting BaMgAl₁₀O₁₇:Eu²⁺, green-emitting Na₂CaPO₄F:0.02 Eu²⁺, and red-emitting CaAlSiN₃:Eu²⁺ phosphors into a single package; the white LEDs exhibited white light with a correlated color temperature of 5540 K, a color-rendering index of 90.75, and color coordinates (0.332, 0.365) close to those of ideal white light.     

Investigation on Eu doped Sr2MgSi2O7 red-emitting phosphors for white-light-emitting diodes

In this work, we report the high temperature solid-state synthesis of red phosphors Sr₂MgSi₂O₇: Eu³⁺ with various Eu³⁺ concentrations. Their luminescent properties at room temperature are investigated. The X-ray diffraction patterns indicate that the red phosphors powder conforms to the tetragonal Sr₂MgSi₂O₇. Impurity structure appears when more than 20% Eu³⁺ is doped. The samples show a strong emission line at 615 nm and the intensity increases with the increase of Eu³⁺ concentration until concentration quenching occurs. Charge compensation assists in the reduction of the impurity structure and vacancies; hence the luminescent intensity is enhanced. The decay measurement indicates that the lifetime of Eu³⁺ emission is about 2-3 ms. Some of the Eu³⁺ can be reduced to Eu²⁺; this is also discussed.     

A potential red phosphor LiGd(MoO4)2:Eu for light-emitting diode application

Eu³⁺-doped LiGd(MoO₄)₂ red phosphor was synthesized by solid-state reaction, and its photoluminescent properties were measured. The effect of Eu³⁺ doping concentration on PL intensity was investigated, and the optimum concentration of Eu³⁺ doped in LiGd(MoO₄)₂ was found to be 30 mol%. Compared with Y₂O₂S:0.05Eu³⁺, Na_0.5Gd_0.5MoO₄:Eu³⁺ and KGd(MoO₄)₂:Eu³⁺, the LiGd(MoO₄)₂:Eu³⁺ phosphor showed a stronger excitation band around 395 nm and a higher intensity red emission of Eu³⁺ under 395 nm light excitation. For the first time, intensive red light-emitting diodes (LEDs) were fabricated by combining phosphor and a 395 nm InGaN chip, confirming that the LiGd(MoO₄)₂:Eu³⁺ phosphor is a good candidate for LED applications.     

Structure and luminescence of Ca2Si5N8：Eu^2＋ phosphor for warm white light-emitting diodes

We have synthesized Ca 2 Si 5 N 8:Eu 2+ phosphor through a solid-state reaction and investigated its structural and luminescent properties.Our Rietveld refinement of the crystal structure of Ca 1.9 Eu 0.1 Si 5 N 8 reveals that Eu atoms substituting for Ca atoms occupy two crystallographic positions.Between 10 K and 300 K,Ca 2 Si 5 N 8:Eu 2+ phosphor shows a broad red emission band centred at ～1.97 eV-2.01 eV.The gravity centre of the excitation band is located at 3.0 eV-3.31 eV.The centroid shift of the 5d levels of Eu 2+ is determined to be ～1.17 eV,and the red-shift of the lowest absorption band to be ～ 0.54 eV due to the crystal field splitting.We have analysed the temperature dependence of PL by using a configuration coordinate model.The Huang-Rhys parameter S=6.0,the phonon energy ν=52 meV,and the Stokes shift S=0.57 eV are obtained.The emission intensity maximum occurring at ～200 K can be explained by a trapping effect.Both photoluminescence (PL) emission intensity and decay time decrease with temperature increasing beyond 200 K due to the non-radiative process.     

Luminescent properties of R doped Sr2SiO4:Eu(R=Li, Na and K) red-emitting phosphors for white LEDs

Sr₂SiO₄:Eu³⁺ and Sr₂SiO₄:Eu³⁺ doped with R⁺(R⁺=Li⁺, Na⁺ and K⁺) phosphors were prepared by conventional solid-state reaction and investigated by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR) and photoluminescence spectroscopy. XRD patterns and SEM reveal that the optimal firing condition for Sr₂SiO₄:Eu³⁺ was 1300 °C for 4 h. The excitation and emission spectra indicate that the phosphor can be effectively excited by ultraviolet (395 nm) and blue (466 nm) light and emits intense red light peaked at around 614 nm corresponding to the ⁵D₀→⁷F₂ transitions of Eu³⁺. In the research work, the effect of R⁺ contents on luminescence property and the Eu³⁺ concentration quenching process have also been investigated. The Eu³⁺ concentration quenching mechanism was verified to be a multipole-multipole interaction and the critical energy-transfer distance was calculated to be around 14.6 Å. The dopant R⁺(R⁺=Li⁺, Na⁺ and K⁺) as charge compensator in Sr₂SiO₄:Eu³⁺ can further enhance luminescence intensity, and the emission intensity of Sr₂SiO₄:Eu³⁺ doping Li⁺ is higher than that of Na⁺ or K⁺.     

Eu2+激活的Ca3SiO5绿色荧光粉的制备和发光特性研究

研究了Eu²⁺激活的绿色发光材料Ca₃SiO₅的制备条件和发光性质. Eu²⁺中心形成主峰值为501 nm和次峰值为570 nm的特征宽带，两峰值叠加形成发射峰值为502nm的绿色发射光谱带. 利用这些光谱结果和Van Uitert 经验公式，确认Ca₃SiO₅:Eu²⁺中存在两种性质有差异的Eu²⁺发光中心，它们分别占据基质中八配位的Ca²⁺(Ⅰ)格位和四配位的Ca²⁺(Ⅱ)格位. 其激发光谱分布在250—450 nm的波长范围，峰值位于375 nm处，可以被InGaN管芯产生的350—410 nm辐射有效激发. 关键词： 发光 荧光粉 绿色荧光粉 3SiO₅')" href="#">Ca₃SiO₅ 2+')" href="#">Eu²⁺     

A red oxide phosphor, Sr2ScAlO5:Eu2+ with perovskite-type structure, for white light-emitting diodes

Sr2ScAlO5:Eu2+,a red oxide phosphor with a perovskite-type structure,has been synthesized through a solid-state reaction and its luminescence properties have been investigated.An absorption band centering at 450 nm is observed from the diffuse reflection spectra and the excitation spectra,indicating that the phosphor can match perfectly with the blue light of InGaN light-emitting diodes.A broad red emission band at 620 nm is found from the emission spectra,originating from the 4f 6 5d-4f 7 transition of the Eu 2+ ions.The best doping content of Eu in this material is about 5%.Sr2ScAlO5:Eu2+is a highly promising red phosphor for use in white light-emitting diodes.     

Green Eu-doped Ba3Si6O12N2 phosphor for white light-emitting diodes: Synthesis, characterization and theoretical simulation

The Eu²⁺-doped Ba₃Si₆O₁₂N₂ green phosphor (Eu_xBa_3−xSi₆O₁₂N₂) was synthesized by a conventional solid state reaction method. It could be efficiently excited by UV-blue light (250-470 nm) and shows a single intense broadband emission (480-580 nm). The phosphor has a concentration quenching effect at x=0.20 and a systematic red-shift in emission wavelength with increasing Eu²⁺ concentration. High quantum efficiency and suitable excitation range make it match well with the emission of near-UV LEDs or blue LEDs. First-principles calculations indicate that Ba₃Si₆O₁₂N₂:Eu²⁺ phosphor exhibits a direct band gap, and low band energy dispersion, leading to a high luminescence intensity. The origin of the experimental absorption peaks is clearly identified based on the analysis of the density of states (DOS) and absorption spectra. The photoluminescence properties are related to the transition between 4f levels of Eu and 5d levels of both Eu and Ba atoms. The 5d energy level of Ba plays an important role in the photoluminescence of Ba₃Si₆O₁₂N₂:Eu²⁺ phosphor. The high quantum efficiency and long-wavelength excitation are mainly attributed to the existence of Ba atoms. Our results give a new explanation of photoluminescence properties and could direct future designation of novel phosphors for white light LED.