Pd diffusion on MgO(1 0 0): The role of defects and small cluster mobility

Density functional theory is used to explore the energy landscape of Pd atoms adsorbed on the terrace of MgO(1 0 0) and at oxygen vacancy sites. Saddle point finding methods reveal that small Pd clusters diffuse on the terrace in interesting ways. The monomer and dimer diffuse via single atom hops between oxygen sites with barriers of 0.34 eV and 0.43 eV respectively. The trimer and tetramer, however, form 3D clusters by overcoming a 2D-3D transition barrier of less than 60 meV. The trimer diffuses along the surface either by a walking or flipping motion, with comparable barriers of ca. 0.5 eV. The tetramer rolls along the terrace with a lower barrier of 0.42 eV. Soft rotational modes at the saddle point lead to an anomalously high prefactor of 1.3 × 10¹⁴ s⁻¹ for tetramer diffusion. This prefactor is two order of magnitude higher than for monomer diffusion, making the tetramer the fastest diffusing species on the terrace at all temperatures for which diffusion is active (above 200 K). Neutral oxygen vacancy sites are found to bind Pd monomers with a 2.63 eV stronger binding energy than the terrace. A second Pd atom, however, binds to this trapped monomer with a smaller energy of 0.56 eV, so that dimers at defects dissociate on a time scale of milliseconds at room temperature. Larger clusters bind more strongly at defects. Trimers and tetramers dissociate from monomer-bound-defects at elevated temperatures of ca. 600 K. These species are also mobile on the terrace, suggesting they are important for the ripening observed at ?600 K during Pd vapor deposition on MgO(1 0 0) by Haas et al. [G. Haas, A. Menck, H. Brune, J.V. Barth, J.A. Venables, K. Kern, Phys. Rev. B 61 (2000) 11105].     

Adsorption, ordering, and chemistry of nitrobenzene on Si(1 0 0)-2 × 1

Surface chemistry of nitrobenzene on Si(1 0 0)-2 × 1 has been investigated using multiple internal reflection Fourier-transform infrared spectroscopy (MIR-FTIR), Auger electron spectroscopy (AES) and thermal desorption mass spectrometry. Molecular adsorption of nitrobenzene at submonolayer coverages is dominating at cryogenic temperatures (100 K). As the surface temperature is increased to 160 K, chemical reaction involving nitro group occurs, while the phenyl entity remains intact. Thus, a barrier of approximately 40.8 kJ/mol is established for the interaction of the nitro group of nitrobenzene with the Si(1 0 0)-2 × 1 surface. Further annealing of the silicon surface leads to the decomposition of nitrobenzene. The concentration of nitrogen and oxygen remains constant on a surface within the temperature interval studied here. AES studies also suggest that the majority of carbon-containing products remain bound to the surface at temperatures as high as 1000 K. The only chemical reaction leading to the release of the gaseous products is benzene formation around 670 K. The amount of benzene accounts only for a few percent of the surface species, while the rest of the phenyl groups connected to the silicon surface via a nitrogen linker remain stable even at elevated temperatures, opening an opportunity for stable surface coatings.     

Luminescence and defects creation under photoexcitation of CsI : Tl crystals in Tl-related absorption bands

Characteristics of the defects created at 4.2 K by the UV-irradiation of CsI : Tl crystals in the Tl⁺-related absorption bands (by photons of 5.8-4.8 eV energy) have been studied. The dependences of the intensities of the thermally stimulated luminescence peaks appearing near 60, 90 and 125 K and of the recombination luminescence photostimulation bands peaking at 2.35, 1.92, 1.33 and 0.89 eV on the irradiation energy and duration, uniaxial stress and thallium concentration have been examined. The mechanisms of the processes, responsible for the appearance of the intense visible (2.55 and 2.25 eV) luminescence of excitons localized near Tl⁺ ions and creation of defects pairs of the type of Tl⁰-V_K and Tl⁺-V_K with various distances between the components, have been discussed.     

Methanol adsorption on Pd(1 1 0) and Ag/Pd(1 1 0) studied by high-resolution photoelectron spectroscopy

Adsorption of methanol on clean Pd(1 1 0) and on an alloyed Ag/Pd(1 1 0) surface has been studied by high-resolution photoelectron spectroscopy. On Pd(1 1 0) two different chemisorbed methanol species were observed for temperatures up to 200 K, with the one at lower binding energy remaining at low coverage. These species were attributed to methanol adsorbed in two different adsorption sites on the Pd(1 1 0) surface. As is well established for this system, heating to 250 K resulted in decomposition of methanol into CO. The adsorption and decomposition behaviour of methanol on the Ag/Pd(1 1 0) surface alloy formed by depositing Ag on Pd(1 1 0) at elevated temperature was similar to that of the pure Pd(1 1 0) surface. This suggests that the amount of Ag present in the Pd(1 1 0) surface in this study does not affect the decomposition behaviour of methanol as compared to pure Pd(1 1 0). Complementary density functional theory calculations also show little influence of Ag on the binding of methanol to Pd. These calculations predict an on-top adsorption site for low methanol coverages.     

Growth and morphology of Cobalt thin films on Pd(1 1 1)

We report on the growth of thin Co films on Pd(1 1 1) at three different temperatures 180 K, 300 K, and 550 K. The structure and morphology was determined by scanning tunneling microscopy and low energy electron diffraction. The growth mode was found to vary with temperature. For 180 K and 300 K, we observed a tendency to double layer growth for the initial layers while at elevated temperatures, the initial film grows in single layer. For most conditions, non-ideal three-dimensional growth was observed. Two-dimensional growth was only found for growth temperature of 550 K and coverages above 5 ML. Depending on temperature, the Co islands at low coverages exhibit three principally different shapes: dendritic at 180 K, hexagonal at 300 K and triangular at 550 K. For growth at 550 K and coverages above 5 ML, the islands changed to an irregular shape. This transition is most likely responsible for the transition to 2D growth. Further, the large strain is relaxed by the creation of a dislocation network with mixed fcc and hcp stacking. Depending on the temperature and coverage, a hexagonal or a triangular network was observed. Finally, we have investigated the effect of annealing Co films prepared at 180 K and 300 K. Heating to 490 K leads to coarsening and intermixing.     

Carbon films grown on Pt(1 1 1) as supports for model gold catalysts

Carbon films were grown on a Pt(1 1 1) single crystal by ethylene decomposition at elevated temperatures (1000-1300 K). Depending on the preparation conditions, different carbon structures formed on the metal surface such as flat and curved graphitic layers, carbon particles and carbon nanowires. Although these carbon films exhibited a high density of surface defects, gold interacted only weakly with the carbon surface. CO adsorption on the Au/carbon systems was very similar to that observed for various Au/oxide systems previously studied. This finding strongly indicates that CO adsorption on gold is essentially independent of the nature of support.     

Oxygen-induced p(3 × 1) reconstruction of the W(1 0 0) surface

The oxidation of the W(1 0 0) surface at elevated temperatures has been studied using room temperature STM and LEED. High exposure of the clean surface to O₂ at 1500 K followed by flash-annealing to 2300 K in UHV results in the formation of a novel p(3 × 1) reconstruction, which is imaged by STM as a missing-row structure on the surface. Upon further annealing in UHV, this surface develops a floreted LEED pattern characteristic of twinned microdomains of monoclinic WO_x, while maintaining the p(3 × 1) missing-row structure. Atomically resolved STM images of this surface show a complex domain structure with single and double W〈0 1 0〉 rows coexisting on the surface in different domains.     

STM studies of the reconstructed Au(1 1 1) thin-film at elevated temperatures

High temperature scanning tunneling microscope (HT-STM) was used to investigate a reconstructed Au(1 1 1) film evaporated on mica. The experiment was carried out at elevated temperatures in the range of 300-500 K. A herringbone reconstruction was observed at a wide range of temperatures. However, at the highest temperatures studied a break down of the reconstruction long range order was noticed. Finally, the presence of a triangular-like reconstruction was reported. Changes in the reconstruction were explained in terms of the change in surface stress arising as a result of the tension at the gold-mica interface.     

CoPt alloy grown on the WSe2(0 0 0 1) van der Waals surface

The structural and magnetic properties of 3-nm-thick CoPt alloys grown on WSe₂(0 0 0 1) at various temperature are investigated. Deposition at room temperature leads to the formation of a chemically disordered fcc CoPt alloy with [1 1 1] orientation. Growth at elevated temperatures induces L1₀ chemical order starting at 470 K accompanied with an increase in grain size and a change in grain morphology. As a consequence of the [1 1 1] growth direction, the CoPt grains can adopt one of the three possible variants of the L1₀ phase with tetragonal c-axis tilted from the normal to the film plane direction at 54°. The average long-range order parameter is found to be 0.35(±0.05) and does not change with the increase in the deposition temperature from 570 to 730 K. This behavior might be related to Se segregation towards the growing facets and surface disorder effects promoted by a high surface-to-volume ratio. Magnetic studies reveal a superparamagnetic behavior for the films grown at 570 and 730 K in agreement with the film morphology and degree of chemical order. The measurements at 10 K reveal the orientation of the easy axis of the magnetization lying basically in the film plane.     

Nanowedge island formation on Mo(1 1 0)

The deposition of ultrathin Fe films on the Mo(1 1 0) surface at elevated temperatures results in the formation of distinctive nanowedge islands. The model of island formation presented in this work is based on both experiment and DFT calculations of Fe adatom hopping barriers. Also, a number of classical molecular dynamics simulations were carried out to illustrate fragments of the model. The islands are formed during a transition from a nanostripe morphology at around 2 ML coverage through a Bales-Zangwill type instability. Islands nucleate when the meandering step fronts are sufficiently roughened to produce a substantial overlap between adjacent steps. The islands propagate along the substrate [0 0 1] direction due to anisotropic diffusion/capture processes along the island edges. It was found that the substrate steps limit adatom diffusion and provide heterogeneous nucleation sites, resulting in a higher density of islands on a vicinal surface. As the islands can be several layers thick at their thinnest end, we propose that adatoms entering the islands undertake a so-called “vertical climb” along the sides of the island. This is facilitated by the presence of mismatch-induced dislocations that thread to the sides of the islands and produce local maxima of compressive strain. Dislocation lines also trigger initial nucleation on the surface with 2-3 ML Fe coverage. The sides of the nanowedge islands typically form along low-index crystallographic directions but can also form along dislocation lines or the substrate miscut direction.     

Photoelectron spectroscopy study of the K-covered ZnO(1 0 1̄ 0) surface; annealing-induced changes in the electronic structure and the chemical composition

The electronic structure and the chemical composition of the K-covered ZnO(1 0 1̄ 0) surface at temperatures between 300 and 1200 K are investigated by X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy. Adsorption of K on ZnO(1 0 1̄ 0) at room temperature results in the formation of a two-dimensional disordered K overlayer and induces 0.2 eV downward bending of the substrate’s bands going from the bulk to the surface. Upon annealing the K-covered surface, initial downward bending turns to upward bending with maximum bending of 0.5 eV at 700-800 K. The thermally induced migration of the bulk O atoms and the resultant increase in the number of the O atoms on the surface is responsible for upward bending on the annealed surface. The accumulated O atoms interact with the predeposited K atoms on the surface to form non-stoichiometric K-O complexes with the O/K atomic ratio being 1.6-1.8 in the temperature range between 600 and 1000 K.     

Vibrational entropy-driven dealloying of Mo(1 0 0) and W(1 0 0) surface alloys

The formation and stability of Cu, Ag and Au-induced c(2 × 2) alloys at the Mo(1 0 0) and W(1 0 0) surfaces have been investigated with low-energy electron microscopy and diffraction. The ordered alloys transform to disordered overlayer structures at elevated temperature. Comparison of the transformation temperatures with energetics obtained from first principles calculations reveals the vibrational entropic contribution to the system free energy that defines alloy thermal stability. Effective Debye temperatures for metal adatoms are determined that exhibit the expected mass and bond strength dependence.     

High-temperature electrical properties of magnesiowustite Mg1 − xFexO and spinel Fe3 − x − yMgxCryO4 ceramics

Phase relationships, thermal expansion and electrical properties of Mg_1 − xFe_xO (x = 0.1-0.45) cubic solid solutions and Fe_{3 − x − y}Mg_xCr_yO_4 ± δ (x = 0.7-0.95; y = 0 or 0.5) spinels were studied at 300-1770 K in the oxygen partial pressure range from 10 Pa to 21 kPa. Increasing iron content enlarges the spinel phase stability domain at reduced oxygen pressures and elevated temperatures. The total conductivity of the spinel ceramics is predominantly n-type electronic and is essentially p(O₂)-independent within the stability domain. The computer simulations using molecular dynamics technique confirmed that overall level of ion diffusion remains low even at high temperatures close to the melting point. Temperature dependencies of the total conductivity in air exhibit a complex behavior associated with changing the dominant defect-chemistry mechanism from prevailing formation of the interstitial cations above 1370-1470 K to the generation of cation vacancies at lower temperatures, and with kinetically frozen cation redistribution in spinel lattice below 700-800 K. The average thermal expansion coefficients of the spinel ceramics calculated from dilatometric data in air vary in the range (9.6-10.0) × 10^− 6 K^− 1 at 300-500 K and (13.2-16.1) × 10^− 6 K^− 1 at 1050-1370 K. Mg_1 − xFe_xO solid solutions undergo partial decomposition on heating under oxidizing and mildly reducing conditions, resulting in the segregation of spinel phase and conductivity decrease.     

Morphology and defect structure of the CeO2(1 1 1) films grown on Ru(0 0 0 1) as studied by scanning tunneling microscopy

The morphology of ceria films grown on a Ru(0 0 0 1) substrate was studied by scanning tunneling microscopy in combination with low-energy electron diffraction and Auger electron spectroscopy. The preparation conditions were determined for the growth of nm-thick, well-ordered CeO₂(1 1 1) films covering the entire surface. The recipe has been adopted from the one suggested by Mullins et al. [D.R. Mullins, P.V. Radulovic, S.H. Overbury, Surf. Sci. 429 (1999) 186] and modified in that significantly higher oxidation temperatures are required to form atomically flat terraces, up to 500 Å in width, with a low density of the point defects assigned to oxygen vacancies. The terraces often consist of several rotational domains. A circular shape of terraces suggest a large variety of undercoordinated sites at the step edges which preferentially nucleate gold particles deposited onto these films. The results show that reactivity studies over ceria and metal/ceria surfaces should be complemented with STM studies, which provide direct information on the film morphology and surface defects, which are usually considered as active sites for catalysis over ceria.     

Change in work function during phase transition of Sc-O/W(1 0 0) system at high temperatures

The change in work function during the phase transition of a Sc-O/W(1 0 0) system at high temperatures of 1500-1700 K was investigated in order to elucidate the mechanism of the decrease in the work function of a (1 × 1)-Sc-O/W(1 0 0) surface. For the measurement of the work function using a secondary electron method at high temperatures, a sample holder was uniquely designed in order to suppress contributions of a large number of thermionic electrons emitted from a low-work-function surface. The obtained work function revealed that the change in work function strongly correlates with the coverage of Sc-O complexes, the stoichiometry of which is Sc₁O₁. The higher the coverage of ScO is, the lower the work function is, suggesting that the work function of the (1 × 1)-Sc-O/W(1 0 0) surface is reduced by the formation of ScO electric dipoles. Furthermore, the decrease in work function was modeled in combination with a previously reported kinetic model describing surface phenomena, i.e., the oxidation, oxygen desorption, diffusion and surface segregation of Sc-O complexes, during the phase transition of the Sc-O/W(1 0 0) surface at high temperatures. It was confirmed that the proposed model can explain the experimentally obtained change in work function very well. The value of the dipole moment of a ScO electric dipole was determined to be 2.7 × 10⁻³⁰ C m.     

Growth and thermal evolution of submonolayer Pt films on Ru(0 0 0 1) studied by STM

The growth of submonolayer Pt on Ru(0 0 0 1) has been studied with scanning tunneling microscopy. We focus on the island evolution depending on Pt coverage θ_Pt, growth temperature T_G and post-growth annealing temperature T_A. Dendritic trigonal Pt islands with atomically rough borders are observed at room temperature and moderate deposition rates of about 5 × 10⁻⁴ ML/s. Two types of orientation, rotated by 180° and strongly influenced by minute amounts of oxygen are observed which is ascribed to nucleation starting at either hcp or fcc hollow sites. The preference for fcc sites changes to hcp in the presence of about one percent of oxygen. At lower growth temperatures Pt islands show a more fractal shape. Generally, atomically rough island borders smooth down at elevated growth temperatures higher than 300 K, or equivalent annealing temperatures. Dendritic Pt islands, for example, transform into compact, almost hexagonal islands, indicating similar step energies of A- and B-type of steps. Depending on the Pt coverage the thermal evolution differs somewhat: While regular islands on Ru(0 0 0 1) are formed at low coverages, vacancy islands are observed close to completion of the Pt layer.     

A nanoindentation study of the mechanical properties of ZnO thin films on (0 0 0 1) sapphire

The mechanical properties of epitaxial ZnO thin films grown on (0 0 0 1) sapphire substrate were investigated by nanoindentation with a Berkovich tip and compared with that of bulk ZnO single crystal. In all indents on ZnO film a single discontinuity (‘pop-in’) in the load versus indentation depth data was observed at a specific depth of between 13 and 16 nm. In bulk ZnO, however only 65% of indents showed pop-in event at a specific depth of between 12 and 20 nm. The mechanism responsible for the ‘pop-in’ event in the epitaxial ZnO thin films as well as in bulk ZnO was attributed to the sudden propagation of dislocations, which had been pinned down by pre-existing defects, along the pyramidal and basal {0 0 0 1} planes (cross slip). The elastic modulus and hardness of the epitaxial ZnO thin films were determined to be 154 ± 5 and 8.7 ± 0.2 GPa, respectively, at an indentation depth of 30 nm.     

The influence of the oxygen exposure on the thermal faceting of W[1 1 1] tip

The oxygen induced faceting of the macroscopic W[1 1 1] tip has been studied for oxygen exposures in the range 0.5-31 L and annealing temperatures 800-1800 K using the field ion microscopy (FIM) technique. After annealing at temperatures lower than 800 K, higher than 1850 K or for exposures lower than 0.5 L faceting was not observed. For exposures 0.5-1.9 L and annealing temperatures 800-1600 K well developed {1 1 2} facets with sharp edges formed. For exposures higher than 2.0 L edges of the {1 1 2} facets were broadening and disappearing, what has been attributed to the formation of three-dimensional tungsten oxides. The oxides could be easily removed by annealing the tip at 1700 K, what leads to formation of sharp facet edges. On the basis of these results a modified procedure of the ultrasharp tip fabrication has been proposed.     

Oxygen-induced nano-faceting of Ir(2 1 0)

The adsorption of oxygen and the nanometer-scale faceting induced by oxygen have been studied on Ir(2 1 0). Oxygen is found to chemisorb dissociatively on Ir(2 1 0) at room temperature. The molecular desorption process is complex, as revealed by a detailed kinetic analysis of desorption spectra. Pyramid-shaped facets with {3 1 1} and (1 1 0) orientations are formed on the oxygen-covered Ir(2 1 0) surface when annealed to T?600 K. The surface remains faceted for substrate temperatures T<850 K. For T>850 K, the substrate structure reverts to the oxygen-covered (2 1 0) planar state and does so reversibly, provided that oxygen is not lost due to desorption or via chemical reactions upon which the planar (2 1 0) structure remains. A clean faceted surface was prepared through the use of low temperature surface cleaning methods: using CO oxidation, or reaction of H₂ to form H₂O, oxygen can be removed from the surface while preserving (“freezing”) the faceted structure. The resulting clean faceted surface remains stable for T<600 K. For temperatures above this value, the surface irreversibly relaxes to the planar state.     

Surface structure and phase transition of Ge(1 1 1)-3 × 3-Pb studied by reflection high-energy positron diffraction

We studied the structures and the phase transition of Pb/Ge(1 1 1) surface by using the reflection high-energy positron diffraction. The surface structures at 60 K and 293 K have the 3 × 3 and √3 × √3 periodicities, respectively. The rocking curves measured at both temperatures are nearly the same. This indicates that the equilibrium positions of the surface atoms do not change according to the phase transition. From the analysis of the rocking curve based on the dynamical diffraction theory, we found that at both temperatures the surface structures are composed of the so-called one-up and two-down model. The 3 × 3-√3 × √3 phase transition for the Pb/Ge(1 1 1) surface is interpreted in terms of order-disorder transition.