Optimization of inductively coupled plasma deep etching of GaN and etching damage analysis

Inductively coupled plasma (ICP) etching of GaN with an etching depth up to 4 μm is systemically studied by varying ICP power, RF power and chamber pressure, respectively, which results in etch rates ranging from ∼370 nm/min to 900 nm/min. The surface morphology and damages of the etched surface are characterized by optical microscope, scanning electron microscope, atomic force microscopy, cathodoluminescence mapping and photoluminescence (PL) spectroscopy. Sub-micrometer-scale hexagonal pits and pillars originating from part of the structural defects within the original GaN layer are observed on the etched surface. The density of these surface features varies with etching conditions. Considerable reduction of PL band-edge emission from the etched GaN surface indicates that high-density non-radiative recombination centers are created by ICP etching. The density of these non-radiative recombination centers is found largely dependent on the degree of physical bombardments, which is a strong function of the RF power applied. Finally, a low-surface-damage etch recipe with high ICP power, low RF power, high chamber pressure is suggested.     

The influence of Ga source and substrate position on the growth of low dimensional GaN wires by chemical vapour deposition

This paper presents the investigation of low dimensional GaN structures synthesized from Ni-catalyzed chemical vapour deposition (CVD) method under two different conditions, i.e. Ga source and substrate position. Comparative studies based on the morphological, structural and optical characteristics of synthesized GaN wires were carried out in this work. The variations of morphological and dimensional aspects of the GaN wires were attributed to the position of Ga precursor and substrates. These factors were found to be able to influence the degree of supersaturation of gaseous reactants, which is essential in the growth of GaN wires by vapour-liquid-solid (VLS) mechanism. The synthesized GaN wires typically were found to have diameters ranging 35-80 nm (nanowires) and 0.4-1.3 μm (microwires), respectively, with length up to several ten of microns. X-ray diffraction (XRD) results indicated that the grown GaN wires were hexagonal wurzite phase. Ultraviolet (UV) and blue emissions were observed from photoluminescence (PL) measurements. Raman spectra displayed asymmetrical and broadened bands which could be ascribed to the size effect, surface disorder and internal strain of the synthesized GaN wires.     

Synthesis and characterization of GaN nanowires by ammoniating Ga2O3/Cr thin films deposited on Si(1 1 1) substrates

GaN nanowires have been successfully synthesized on Si(1 1 1) substrates by magnetron sputtering through ammoniating Ga₂O₃/Cr thin films at 950 °C. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), FT-IR spectrophotometer, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (TEM), and photoluminescence (PL) spectrum were carried out to characterize the microstructure, morphology, and optical properties of GaN samples. The results demonstrate that the nanowires are single-crystal GaN with hexagonal wurtzite structure and high-quality crystalline, have the size of 30-80 nm in diameter and several tens of microns in length with good emission properties. The growth direction of GaN nanowires is perpendicular to the fringe of (1 0 1) plane. The growth mechanism of GaN nanowires is also discussed in detail.     

Time-resolved spectroscopy of freestanding GaN layers grown by halide vapour phase epitaxy

Freestanding GaN layers of various thicknesses grown by HVPE have been studied by time-resolved spectroscopy combined with structural and electrical measurements. We have observed an increase of the PL lifetime with increasing layer thickness; however, a saturation of the recombination times has been detected for the GaN layers thicker than 400 μm. We explain the observed thickness-dependent behavior of the decay times by competition of two nonradiative mechanisms; namely, for layers with thickness less than 400 μm the main nonradiative channel is related to the structural defects, while in thicker layers the recombination decay time is limited by impurities and/or vacancies.     

Control of nucleation site density of GaN nanowires

The control of nucleation site size and density for Au catalyst-driven growth of GaN nanowires is reported. By using initial Au film thicknesses of 15-50 Å we have shown that annealing between 300 and 900 °C creates Au cluster size in the range 30-100 nm diameter with a cluster density from 300 to 3500 μm⁻².Conventional optical lithography to create parallel Au stripes shoes that a minimum separation of ∼15 μm is needed to avoid overlap of wires onto neighboring lines with our growth conditions that yield wires of this same length. The GaN nanowires exhibit strong band-edge photoluminescence and total resistances of 1.2 × 10⁸-5.5 × 10⁶ Ω in the temperature range from 240 to 400 K, as determined for the temperature-dependent current-voltage characteristics.     

High resolution X-ray diffraction of GaN grown on Si (1 1 1) by MOVPE

High temperature GaN layers have been grown on Si (1 1 1) substrate by metalorganic vapor phase epitaxy (MOVPE). AlN was used as a buffer layer and studied as a function of thickness and growth temperature. The growth was monitored by in situ laser reflectometry. High resolution X-ray diffraction (HRXRD) revealed that optimized monocrystalline GaN was obtained for a 40 nm AlN grown at 1080 °C. This is in good agreement with the results of morphological study by scanning electron microscopy (SEM) and also confirmed by atomic force microscopy (AFM) observations. The best morphology of AlN with columnar structure and lower rms surface roughness is greatly advantageous to the coalescence of the GaN epilayer. Symmetric and asymmetric GaN reflections were combined for twist and stress measurements in monocrystalline GaN. It was found that mosaicity and biaxial tensile stress are still high in 1.7 μm GaN. Curvature radius measurement was also done and correlated to the cracks observations over the GaN surface.     

Synthesis and field emission properties of GaN nanowires

Gallium nitride (GaN) nanowires grown on nickel-coated n-type Si (1 0 0) substrates have been synthesized using chemical vapor deposition (CVD), and the field emission properties of GaN nanowires have been studied. The results show that (1) the grown GaN nanowires, which have diameters in the range of 50-100 nm and lengths of several micrometers, are uniformly distributed on Si substrates. The characteristics of the grown GaN nanowires have been investigated using X-ray diffraction (XRD) and transmission electron microscopy (TEM), and through these investigations it was found that the GaN nanowires are of a good crystalline quality (2) When the emission current density is 100 μA/cm², the necessary electric field is an open electric field of around 9.1 V/μm (at room temperature). The field enhancement factor is ∼730. The field emission properties of GaN nanowires films are related both to the surface roughness and the density of the nanowires in the film.     

Synthesis, characterization, growth mechanism, photoluminescence and field emission properties of novel dandelion-like gallium nitride

Dandelion-like gallium nitride (GaN) microstructures were successfully synthesized via Ni catalyst assisted chemical vapor deposition method at 1200 °C under NH₃ atmosphere by pre-treating precursors with aqueous ammonia. The as-synthesized product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). X-ray diffraction analysis revealed that as-synthesized dandelion-like GaN was pure and has hexagonal wurtzite structure. SEM results showed that the size of the dandelion-like GaN structure was in the range of 30-60 μm. Dandelion-like GaN microstructures exhibited reasonable field emission properties with the turn-on field of 9.65 V μm⁻¹ (0.01 mA cm⁻²) and threshold field of 11.35 V μm⁻¹ (1 mA cm⁻²) which is sufficient for applications of electron emission devices, field emission displays and vacuum micro electronic devices. Optical properties were studied at room temperature by using fluorescence spectrophotometer. Photoluminescence (PL) measurements of dandelion-like GaN showed a strong near-band-edge emission at 370.2 nm (3.35 eV) with blue band emission at 450.4 nm (2.75 eV) and 465.2 nm (2.66 eV) but with out yellow band emission. The room-temperature photoluminescence properties showed that it has also potential application in light-emitting devices. The tentative growth mechanism for the growth of dandelion-like GaN was also described.     

Effect of ZnO sacrificial layer thickness on the structure and optical properties of GaN nanoparticles prepared by RF magnetron sputtering

GaN nanoparticles were prepared on sapphire (0001) substrates with ZnO sacrificial layers by self assembly of Ga₂O₃ films in their reaction with NH₃. ZnO sacrificial layers with different thicknesses and Ga₂O₃ films were deposited on sapphire substrates in turn by a radio frequency (RF) magnetron sputtering system. Nitridation of the Ga₂O₃ films was then carried out in a quartz tube furnace. The effect of ZnO sacrificial layer thickness on the structure and optical properties of nanoparticles prepared by RF magnetron sputtering were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM), and photoluminescence (PL). GaN nanoparticles with ZnO sacrificial layers of different thicknesses possess hexagonal wurtzite crystal structure and have a preferred orientation with c axis perpendicular to the sapphire substrates. XRD, SEM, and AFM results reveal that the better-crystallinity, uniform, and well-dispersed GaN nanoparticles (～30 nm) without agglomeration were obtained with a ZnO sacrificial layer 300-nm thick. The PL result reveals that the optical properties of the GaN nanoparticles are improved with a ZnO sacrificial layer 300-nm thick. Therefore, we suggest that a ZnO sacrificial layer 300-nm thick is the most suitable condition for obtaining better-quality GaN nanoparticles with good luminescence performance. Moreover, the mechanism of the formation of GaN nanoparticles with ZnO sacrificial layers is also discussed.     

Characterization of GaN layers grown on silicon-on-insulator substrates

In this study, we report growth and characterization of GaN layers on (1 0 0)- and (1 1 1)-oriented silicon-on-insulator (SOI) substrates. Using metalorganic chemical vapor deposition (MOCVD) technique, GaN layers are grown on KOH treated Si (1 0 0) overlayers of thin SIMOX SOI substrates. Growth of GaN on such surface with an AlN buffer leads to c-axis orientated textured GaN. This is evident from high-resolution X-ray diffraction (HRXRD) measurement, which shows a much broader rocking curve linewidth. Significantly enhanced photoluminescence (PL) intensity and partial stress relaxation is observed in GaN layers grown on these SOI substrates. Furthermore, GaN grown on (1 1 1)-oriented bonded SOI substrates shows good surface morphology and improved optical quality. Micro-Raman, micro-PL, and HRXRD measurements reveal single crystalline hexagonal GaN oriented along (0 0 0 1) direction. We also report growth and characterization of InGaN/GaN multi-quantum well structures on (1 1 1)-oriented bonded SOI. Such an approach to realize nitride epilayers would be useful to fabricate GaN-based micro-opto-electromechanical systems (MOEMS) and sensors.     

Synthesis of flower-shape clustering GaN nanorods by ammoniating Ga2O3 films

Flower-shape clustering GaN nanorods are successfully synthesized on Si（111） substrates through ammoniating Ga2O3/ZnO films at 950℃. The as-grown products are characterized by x-ray diffraction （XRD）, scanning electron microscope （SEM）, field-emission transmission electron microscope （FETEM）, Fourier transform infrared spectrum （FTIR） and fluorescence spectrophotometer. The SEM images demonstrate that the products consist of flower-shape clustering GaN nanorods. The XRD indicates that the reflections of the samples can be indexed to the hexagonal GaN phase and HRTEM shows that the nanorods are of pure hexagonal GaN single crystal. The photoluminescence （PL） spectrum indicates that the GaN nanorods have a good emission property. The growth mechanism is also briefly discussed.     

GaN epilayers on nanopatterned GaN/Si(1 1 1) templates: Structural and optical characterization

Template-based nanoscale epitaxy has been explored to realize high-quality GaN on Si(1 1 1) substrates. We have employed polystyrene-based nanosphere lithography to form the nano-hole array patterns on GaN/Si(1 1 1) template and then, subsequent regrowth of GaN is carried out by metalorganic chemical vapor deposition (MOCVD). During the initial growth stage of GaN on such nanopatterned substrates, we have observed formation of nanoislands with hexagonal pyramid shape due to selective area epitaxy. With further epitaxial regrowth, these nanoislands coalesce and form continuous GaN film. The overgrown GaN on patterned and non-patterned regions is characterized by high-resolution X-ray diffraction (HRXRD) and high-spatial resolution optical spectroscopic methods. Micro-photoluminescence (PL), micro-Raman scattering and scanning electron microscopy (SEM) have been used to assess the microstructural and optical properties of GaN. Combined PL and Raman data analyses show improved optical quality when compared to GaN simultaneously grown on non-patterned bulk Si(1 1 1). Such thicker GaN templates would be useful to achieve III-nitride-based opto- and electronic devices integrated on Si substrates.     

Growth and characterization of pine-needle-shaped GaN nanorods by sputtering and ammoniating process

Pine-needle-shaped GaN nanorods have been successfully synthesized on Si(111) substrates by ammoniating Ga₂O₃/Nb films at 950 ^°C in a quartz tube. The products are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and field-emission transmission electron microscope (FETEM). The results show that the pine-needle-shaped nanorods have a pure hexagonal GaN wurtzite with a diameter ranging from 100 to 200 nm and a length up to several microns. The photoluminescence spectra (PL) measured at room temperature only exhibit a strong emission peak at 368 nm. Finally, the growth mechanism of GaN nanorods is also briefly explored.     

The exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses

This paper studies the exciton-longitudinal-optical-phonon coupling in InGaN/GaN single quantum wells with various cap layer thicknesses by low temperature photoluminescence (PL) measurements.With increasing cap layer thickness,the PL peak energy shifts to lower energy and the coupling strength between the exciton and longitudinal-optical (LO) phonon,described by Huang-Rhys factor,increases remarkably due to an enhancement of the internal electric field.With increasing excitation intensity,the zero-phonon peak shows a blueshift and the Huang-Rhys factor decreases.These results reveal that there is a large built-in electric field in the well layer and the exciton-LO-phonon coupling is strongly affected by the thickness of the cap layer.     

Synthesis and characterization of GaN nanowires

In this work, GaN nanowires were fabricated on Si substrates coated with NiCl₂ thin films using chemical vapor deposition (CVD) method by evaporating Ga₂O₃ powder at 1100 °C in ammonia gas flow. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscope (HRTEM) and photoluminescence (PL) spectrum are used to characterize the samples. The results demonstrate that the nanowires are single-crystal GaN with hexagonal wurtzite structure. The growth mechanism of GaN nanowires is also discussed.     

Two-step synthesis of one-dimensional single crystalline GaN nanowires

Straight and smooth GaN nanowires were synthesized on quartz substrates through the direct reaction of Ga₂O₃ thin films with flowing ammonia in a horizontal oven without using a template or catalyst. X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray (EDX), transmission electron microscopy (TEM) and photoluminescence (PL) were used to characterize the samples. The straight and smooth cylindrical nanostructures are high quality single crystalline hexagonal wurtzite GaN nanowires with diameters ranging from 5 to 30 nm and lengths up to 20 μm. The near-band-edge emission peak located at 367 nm was observed at room temperature.     

Synthesis and characterization of GaN nanowires by a catalyst assisted chemical vapor deposition

GaN nanowires have been fabricated on Si(1 1 1) substrates by chemical vapor deposition (CVD) method with NiCl₂ as catalyst and their compositions, microstructures, morphologies and light emitting properties were characterized by X-ray diffraction (XRD), FT-IR spectrophotometer (FTIR), scanning electron microscope (SEM), high-resolution transmission electron microscope (HRTEM), Raman spectroscopy and photoluminescence (PL). The results demonstrate that the nanowires are single-crystal GaN with hexagonal wurtzite structure and high crystalline quality, having the size of 20-50 nm in diameter and several tens of microns in length with some nano-droplets on their tips, which reveals that the growth mechanism of GaN nanowires agrees with vapor-liquid-solid (VLS) process. Five first-order Raman active phonon bands move to low shift and A₁(TO), E₁(TO), and E₂ (high) bands are overlapped and broaden, which is caused by uncertainty in the phonon wave vector. Five non-first-order active Raman phonons also appear, which is caused by the small dimension and high surface disorder degree. A blue-shift of the band-gap emission occurs due to quantum confinement effect.     

Effects of the sputtering time of ZnO buffer layer on the quality of GaN thin films

ZnO thin films with different thickness (the sputtering time of ZnO buffer layers was 10 min, 15 min, 20 min, and 25 min, respectively) were first prepared on Si substrates using radio frequency magnetron sputtering system and then the samples were annealed at 900 °C in oxygen ambient. Subsequently, a GaN epilayer about 500 nm thick was deposited on ZnO buffer layer. The GaN/ZnO films were annealed in NH₃ ambient at 950 °C. X-ray diffraction (XRD), atom force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL) were used to analyze the structure, morphology, composition and optical properties of GaN films. The results show that their properties are investigated particularly as a function of the sputtering time of ZnO layers. For the better growth of GaN films, the optimal sputtering time is 15 min.     

Synthesis of aligned GaN nanorods on Si (111) by molecular beam epitaxy

Straight and well-aligned GaN nanorods have been successfully synthesized by molecular beam epitaxy (MBE) method. The GaN nanorods have been characterized by field-emission scanning electron microscopy (FE-SEM) equipped with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). SEM images show that GaN nanorods are constituted with two parts of which shapes are different from each other. The upper part of the nanorod is very thin and its lower part is relatively thick. The XRD and EDS analysis have identified that the nanorods are pure hexagonal GaN with single crystalline wurtzite structure. The TEM images indicate that the nanorods are well crystallized and nearly free from defects. The XRD, HRTEM, and SAED pattern reveal that the growth direction of GaN nanorods is 〈0001〉. The photoluminescence (PL) spectra indicate the good emission property for the nanorods. Finally, we have demonstrated about the two-step growth of the nanorods. PACS 81.07.Bc; 81.05.Ea; 81.15.Hi     

Numerical optimization of carrier confinement characteristics in (AlxGa1−xN/AlN)SLs/GaN heterostructures

We present numerical optimization of carrier confinement characteristics in (Al_xGa_1−xN/AlN)SLs/GaN heterostructures in the presence of spontaneous and piezoelectrically induced polarization effects. The calculations were made using a self-consistent solution of the Schrödinger, Poisson, potential and charge balance equations. It is found that the sheet carrier density in GaN channel increases nearly linearly with the thickness of AlN although the whole thickness and equivalent Al composition of Al_xGa_1−xN/AlN superlattices (SLs) barrier are kept constant. This result leads to the carrier confinement capability approaches saturation with thicknesses of AlN greater than 0.6 nm. Furthermore, the influence of carrier concentration distribution on carrier mobility was discussed. Theoretical calculations indicate that the achievement of high sheet carrier density is a trade-off with mobility.