Fabrication of stable, transparent and superhydrophobic nanocomposite films with polystyrene functionalized carbon nanotubes

Stable, transparent and superhydrophobic carbon nanotube (CNT) nanocomposite films were fabricated by one-step spray casting process using the polystyrene functionalized CNTs, which were prepared by “living” free-radical polymerization and analyzed by means of infrared spectroscopy and thermal gravimetric analysis. The CNT film has a high water contact angle of 160° and a sliding angle of less than 3°. The surface topography of the fabricated film was characterized by field emission scanning electron microscopy. The transparency of the CNT film was investigated by UV–vis spectroscopy. The result shows that the CNT film has light transmittance of about 78% in the visible light region.     

Functionalization of carbon nanotubes with silver clusters

In this paper, an advanced method of one-step functionalization of single and multi walled carbon nanotubes (SWCNTs and MWCNTs) using γ-irradiation was described. Two synthesis procedures, related with different reduction species, were employed. For the first time, poly(vinyl alcohol) PVA is successfully utilized as a source to reduce silver (Ag) metal ions without having any additional reducing agents to obtain Ag nanoparticles on CNTs. The decoration of carbon nanotubes with Ag nanoparticles takes place through anchoring of (PVA) on nanotube's surface. Optical properties of as-prepared samples and mechanism responsible for the functionalization of carbon nanotubes were investigated using UV-vis and FTIR spectroscopy, respectively. Decorated carbon nanotubes were visualized using microscopic techniques: transmission electron microscopy and scanning tunneling microscopy. Also, the presence of Ag on the nanotubes was confirmed using energy dispersive X-ray spectroscopy. This simple and effective method of making a carbon nanotube type of composites is of interest not only for an application in various areas of technology and biology, but for investigation of the potential of radiation technology for nanoengineering of materials.     

Magnetization of carbon nanotubes

For narrow-gap carbon nanotubes, the curvature effect due to the misorientation of 2p_z orbitals dominates over electronic structures and thus magnetic properties. It significantly changes magnetization and magnetic susceptibility, and creates special structures in them. There exists a critical field direction in changing magnetism. The critical angle strongly depends on the chiral angle, the nanotube radius, and the temperature. One-dimensional carbon nanotubes are quite different from zero-dimensional carbon tori, such as in terms of special structures in magnetization, the strength of the magnetic response, and the critical angle.     

Terahertz applications of carbon nanotubes

We formulate and justify several proposals utilizing unique electronic properties of carbon nanotubes for a broad range of applications to THz optoelectronics, including THz generation by hot electrons in quasi-metallic nanotubes, frequency multiplication in chiral-nanotube-based superlattices controlled by a transverse electric field, and THz radiation detection and emission by armchair nanotubes in a strong magnetic field.     

Thermal treatment of the carbon nanotubes and their functionalization with styrene

In this work we studied the functionalization of commercially available multiwalled carbon nanotubes (MWCNT) (Nanocyl 3100) with polystyrene by the method so called “grafting from”. The nanotubes were used as received and oxidized in air at 400 °C. The functionalization was started using thionyl chloride under reflux, followed by a reaction with ethylene glycol which allowed the inclusion of hydroxyl groups. The reaction of those with 2-chloropropionyl chloride led to the generation of the polymerization initiator. Last, the radical polymerization of the functionalized nanotubes, using styrene as the monomer, led to new materials which were studied with thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) and ultraviolet–visible (UV–vis) spectroscopy.     

Investigation of electrical transport in hydrogenated multiwalled carbon nanotubes

Highly disordered multiwalled carbon nanotubes of large outer diameter (∼60 nm) fabricated by means of chemical vapor deposition process inside porous alumina templates exhibit ferromagnetism when annealed in a H₂/Ar atmosphere. In the presence of an applied magnetic field, there is a transition from positive to negative magnetoresistance. The transition may be explained in terms of the Bright model for ordered and disordered carbon structures. Additionally, temperature dependent electrical transport experiments exhibit a zero-bias anomaly at low temperature.     

Time-dependent wave-packet approach to the quantum transport of carbon nanotubes with vacancies

We investigate the vacancy effect on the electronic transport properties of the (5,5)-metallic and (5,0)-semiconducting carbon nanotubes using the time-dependent wave-packet approach based on the Kubo-Greenwood formula within the tight-binding approximation. We found that the metallic and semiconducting carbon nanotubes show different electronic transport properties for the states created by vacancies.     

One-step preparation of water-soluble single-walled carbon nanotubes

A novel one-step process using potassium persulfate (KPS) as oxidant is proposed in this paper to prepare water-soluble single-walled carbon nanotubes (SWNTs). The process without the need for organic solvents and acids is a low-cost, eco-friendly, facile method. Morphology observation by atomic force microscopy (AFM) indicates that the KPS-treated SWNTs were effectively debundled without obvious shortening in their length. The functional groups and thermal stability of the treated SWNTs were analyzed by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). XPS results show that several functional groups such as potassium carboxylate (-COOK), carbonyl (-CO) and hydroxyl (-C-OH) groups were formed on the surfaces of the SWNTs, while the TGA results reveal that the quantity of the functional groups can reach to approximately 20%.     

Damping of electron Zitterbewegung in carbon nanotubes

Zitterbewegung (ZB, trembling motion) of electrons in semiconductor carbon nanotubes is described taking into account dephasing processes. The density matrix formalism is used for the theory. Differences between decay of ZB oscillations due to electron localization and that due to dephasing are discussed.     

One-pot, efficient functionalization of multi-walled carbon nanotubes with diamines by microwave method

Diamines are known to act as a medium to bind miscellaneous compounds to carbon nanotubes (CNT). However, they are commonly applied in a tedious manner. Here, multi-walled carbon nanotubes (MWCNTs) were functionalized by a series of diamine molecules (ethylenediamine, 1,6-hexamethylenediamine and 1,4-diaminobenzen) in a one-pot, rapid microwave-assisted method. Surface functionality groups and morphology of MWCNTs were analyzed by infrared spectroscopy, thermogravimetric analysis, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. The results consistently confirmed the formation of diamines functionalities on MWCNTs, while the structure of MWCNT has remained relatively intact. This simple and efficient process may play an important role for realizing miscellaneous functionalization of CNTs.     

Microwave-induced electrophilic addition of single-walled carbon nanotubes with alkylhalides

We report the microwave-induced electrophilic addition of single-walled carbon nanotubes (SWNTs) with alkylhalides using Lewis acid as a catalyst followed by hydrolysis. The reaction results in the attachment of alkyl and hydroxyl groups to the surface of the nanotubes. This rapid and high-energy microwave radiation is found to be highly efficient for this reaction, which only needs as low as several minutes. The resulting nanotubes were characterized with FTIR, UV-vis-NIR, Raman, TGA, TEM and AFM. It demonstrates that iodo-alkanes show higher reaction activity with SWNTs than chloro- and bromo-alkanes.     

Synthesis and characterization of carbon nanotubes on carbon microfibers by floating catalyst method

In this paper, carbon nanotubes were synthesized on carbon microfibers by floating catalyst method with the pretreatment of carbon microfibers at the temperature of 1023 K, using C₂H₂ as carbon source and N₂ as carrier gas. The morphology and microstructure of carbon nanotubes were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The composition of carbon nanotubes was determined by energy dispersive X-ray spectroscopy (EDX). The results showed that the surface of treated carbon microfibers was thickly covered by carbon nanotubes with diameters of about 50 nm. EDX image indicated that the composition of carbon nanotubes was carbon. In comparison with the sample grown on untreated carbon microfibers surface, it was found that after carbon microfibers were boiled in the solution of sulfur acid and nitric acid (VH₂SO₄:VHNO₃ = 1:3) and immersed in the solution of iron nitrate and xylene, carbon nanotubes with uniform density can be grown on carbon microfibers surface. Based on the results, we concluded that the pretreatment of carbon microfibers had great effect on the growth of carbon nanotubes by floating catalyst method.     

碳纳米管在储氢上的应用

氢能是一种理想的能源载体,而经济有效的储氢手段是氢能实现规模应用急需解决的关键问题之一。碳纳米管在存储氢气上表现出来的独特性质,使其最有希望成为一种新的高效的储氢材料。从实验、理论研究两个方面总结了前人在碳纳米管储氢上的研究成果,并对碳纳米管储氢吸附方式,吸附量影响因素等方面做出分析。最后指出为实现碳纳米管储氢大规模应用仍需做的一些基础性研究工作。     

Effects of composition of catalysts on the preparation of single-walled carbon nanotubes synthesized over W–Co–MgO catalysts

A series of W–Co–MgO catalysts were prepared for the first time by decomposing a mixture of magnesium nitrate, ammonium paratungstate, citric acid, and cobalt nitrate. Single-walled carbon nanotubes (SWCNTs) were synthesized over these W–Co–MgO catalysts and the effects of the quantity of metal in the catalysts on the synthesis of SWCNTs were investigated by Raman spectroscopy and transmission electron microscopy (TEM). The results show that, among W–Co–MgO catalysts, the W1–Co5 catalyst was found to be most effective for synthesizing SWCNTs. The diameter distribution of as-grown SWCNTs prepared over the W1–Co5 catalyst was estimated to range from 0.72–1.64 nm. When the molar ratios of W:MgO and Co:MgO in the catalysts are more than 2:100 and 5:100, respectively, the amorphous carbon content or defect concentration of SWCNTs may be increased with the increase of the quantity of metal in the catalysts. The dependence of the diameter distribution of SWCNTs on the quantity of W in the catalysts is small. However, the proportion of SWCNTs with larger diameter is increased as the quantity of Co in the catalysts is increased owing to the increase in the number of larger active sites.     

Biological functionalization and fluorescent imaging of carbon nanotubes

Biofunctionalization and manipulating of carbon nanotubes (CNTs) is important for biomedical research and application. Cy5 labeled goat anti-rabbit IgG (anti-IgG-Cy5) is chemically bonded to CNTs via a two-step process of diimide-activated amidation. This process can avoid the intermolecular connection of proteins. Fluorescent imaging of CNTs in aqueous solution has been demonstrated using anti-IgG-Cy5 immobilized CNTs (IgG-CNTs) as the model. The biologically functionalized carbon nanotubes (f-CNTs) in solution have been observed successfully using fluorescence microscopy. The fluorescent image of highly oriented f-CNTs is obtained at first time. The influencing factors on fluorescent imaging including oxidation duration, background noise and reactant concentration are discussed.     

Combined torsional buckling of double-walled carbon nanotubes with axial load in the multi-field coupled condition

The present study has theoretically investigated the combined torsional buckling of double-walled carbon nanotubes (DWCNTs) with axial load in the multi-field coupled condition. The effects of torsion, axial load, thermal-electrical change, surrounding elastic medium and the Van der Waals forces are all taken into consideration. The governing equation of buckling for CNTs subjected to thermo-electro-mechanical loadings has been established based on an elastic shell model of continuum mechanics. Reasonable s...     

The effect of carbon nanotubes on the corrosion and tribological behavior of electroless Ni-P-CNT composite coating

In this study, Ni-P-CNT composite coating was successfully deposited on the surface of copper by electroless plating. X-ray diffraction (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the coatings. The wear behavior of the coatings was investigated using a pin-on-disk test rig and subsequently friction coefficient data were reported. The corrosion behavior of the Ni-P and Ni-P-CNT coated specimen were evaluated through polarization curves and electrochemical impedance spectroscopy (EIS) in 3.5 wt.% NaCl aqueous solution at the room temperature. The results indicated that the incorporation of carbon nanotubes (CNTs) in the coating improved both tribological behavior and corrosion resistance. These improvements have been attributed to superior mechanical properties, unique topological structure and high chemical stability of nanotubes.     

A comparison between the mechanical and thermal properties of single-walled carbon nanotubes and boron nitride nanotubes

Carbon nanotubes (CNTs) are semimetallic while boron nitride nanotubes (BNNTs) are wide band gap insulators. Despite the discrepancy in their electrical properties, a comparison between the mechanical and thermal properties of CNTs and BNNTs has a significant research value for their potential applications. In this work, molecular dynamics simulations are performed to systematically investigate the mechanical and thermal properties of CNTs and BNNTs. The calculated Young’s modulus is about 1.1 TPa for CNTs and 0.72 TPa for BNNTs under axial compressions. The critical bucking strain and maximum stress are inversely proportional to both diameter and length-diameter ratio and CNTs are identified axially stiffer than BNNTs. Thermal conductivities of (10, 0) CNTs and (10, 0) BNNTs follow similar trends with respect to length and temperature and are lower than that of their two-dimensional counterparts, graphene nanoribbons (GNRs) and BN nanoribbons (BNNRs), respectively. As the temperature falls below 200 K (130 K) the thermal conductivity of BNNTs (BNNRs) is larger than that of CNTs (GNRs), while at higher temperature it is lower than the latter. In addition, thermal conductivities of a (10, 0) CNT and a (10, 0) BNNT are further studied and analyzed under various axial compressive strains. Low-frequency phonons which mainly come from flexure modes are believed to make dominant contribution to the thermal conductivity of CNTs and BNNTs.     

Increasing the octane number of gasoline using functionalized carbon nanotubes

The octane number is one of the characteristics of spark-ignition fuels such as gasoline. Octane number of fuels can be improved by addition of oxygenates such as ethanol, MTBE (methyl tert-butyl ether), TBF (tertiary butyl formate) and TBA (tertiary butyl alcohol) as well as their blends with gasoline that reduce the cost impact of fuels. Carbon nanotubes (CNTs) are as useful additives for increasing the octane number. Functionalized carbon nanotubes containing amide groups have a high reactivity and can react with many chemicals. These compounds can be solubilized in gasoline to increase the octane number. In this study, using octadecylamine and dodecylamine, CNTs were amidated and the amino-functionalized carbon nanotubes were added to gasoline. Research octane number analysis showed that these additives increase octane number of the desired samples. X-ray diffraction (XRD), Fourier transforms infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and thermal gravimetry analyses (TGA) were used for characterization of the prepared functionalized carbon nanotubes.     

碳纳米管负载矾的第一性原理研究

本文基于密度泛函第一性原理研究了原始和带有缺陷的(Stone-Wales缺陷和单空位缺陷)碳纳米管负载金属V的稳定构型.对于V吸附在原始碳纳米管(CNT)上时,V在内表面的吸附比外表面的吸附有更强的相互作用力,且六元环内表面结构最稳定.当V与Stone-Wales缺陷碳纳米管相互作用时,V原子易吸附在管外七元环C-C键的外表面和内表面处,这说明缺陷位置的有效结合使之局域化加强.而以单空位缺陷碳纳米管为载体时V最易吸附在外缺陷处,相当于碳纳米管的一个C被金属V原子取代,形成了3个V-C_(sur)键,这进一步表明SV管外吸附比管内吸附更容易.我们从上述三种构型载体中发现,金属V吸附在缺陷碳纳米管时的稳定性要优于原始碳纳米管,且SV缺陷对金属V的固定效果最好.