High pressure X-ray diffraction study of potassium azide

Crystal structure and compressibility of potassium azide was investigated by in-situ synchrotron powder X-ray diffraction in a diamond anvil cell at room temperature up to 37.7 GPa. In the body-centered tetragonal (bct) phase, an anisotropic compressibility was observed with greater compressibility in the direction perpendicular to the plane containing N₃⁻ ions than directions within that plane. The bulk modulus of the bct phase was determined to be 18.6(7) GPa. A pressure-induced phase transition may occur at 15.5 GPa.     

In situ observations of temperature- and pressure-induced phase transitions in TiH2: Angle-dispersive and synchrotron energy-dispersive X-ray diffraction studies

We investigated the behavior of the structure of titanium hydride (TiH₂), an important compound in hydrogen storage research, at elevated temperatures (0-120 °C) and high pressures (1 bar-34 GPa). Temperature-induced changes of TiH₂ as indicated in the alteration of the ambient X-ray demonstrated a cubic to tetragonal phase transition occurring at about 17 °C. The main focus of this study was to identify any pressure-induced structural transformations, including possible phase transitions, in TiH₂. Synchrotron X-ray diffraction studies were carried out in situ (diamond anvil cell) in a compression sequence up to 34 GPa and in subsequent decompression to ambient pressure. The pressure evolution of the diffraction patterns revealed a cubic (Fm-3m) to tetragonal (I4/mmm) phase transition at 2.2 GPa. The high-pressure phase persisted up to 34 GPa. After decompression to ambient conditions the observed phase transition was completely reversible. A Birch-Murnaghan fit of the unit cell volume as a function of pressure yielded a zero-pressure bulk modulus K₀=146(14) GPa, and its pressure derivative K′₀=6(1) for the high-pressure tetragonal phase of TiH₂.     

High pressure X-ray diffraction study of ReS2

The high-pressure behavior of rhenium disulfide (ReS₂) has been investigated to 51.0 GPa by in situ synchrotron X-ray diffraction in a diamond anvil cell at room temperature. The results demonstrate that the ReS₂ triclinic phase is stable up to 11.3 GPa, at which pressure the ReS₂ transforms to a new high-pressure phase, which is tentatively identified with a hexagonal lattice in space group P6?m2. The high-pressure phase is stable up to the highest pressure in this study (51.0 GPa) and not quenchable upon decompression to ambient pressure. The compressibility of the triclinic phase exhibits anisotropy, meaning that it is more compressive along interlayer directions than intralayer directions, which demonstrates the properties of the weak interlayer van der Waals interactions and the strong intralayer covalent bonds. The largest change in the unit cell angles with increasing pressures is the increase of β, which indicates a rotation of the sulfur atoms around the rhenium atoms during the compression. Fitting the experimental data of the triclinic phase to the third-order Birch-Murnaghan EOS yields a bulk modulus of K_OT=23±4 GPa with its pressure derivative K_OT′= 29±8, and the second-order yields K_OT=49±3 GPa.     

Structure and SHG of the high pressure phase IV of HgBr2

Angle dispersive X-ray diffraction experiments on mercuric bromide (HgBr₂) under high pressure up to 11.0 GPa were carried out at room temperature using synchrotron radiation. In addition to the already known four different phases of HgBr₂ in the pressure-temperature range of p<4.5 GPa, 90<T<600 K our observations show the existence of a new phase (V) above 9.0 GPa and, together with published material, support the phase transition sequence: (I) orthorhombic-(II) orthorhombic-(III) monoclinic-(IV) trigonal-(V) trigonal/hexagonal. The structure of phase IV with space group symmetry P3 has been determined from powder diffraction data. The observation of second-harmonic-generation signals confirms the absence of an inversion center. The structure of phase IV is a commensurately modulated variant of the CdI₂ type layer structure, where part of the Hg atoms are displaced from the centers of the HgBr₆ octahedra by a much as 0.76 Å in the direction perpendicular to the layers.     

Equation of state of silicon nitride carbodiimide Si2CN4

The lattice parameters of silicon nitride carbodiimide Si₂CN₄ have been measured up to 8 GPa at room temperature using energy-dispersive X-ray powder diffraction with synchrotron radiation. A fit of the experimental p-V data to the Birch-Murnaghan equation of state yields the values of the bulk modulus of 8.8(2) GPa and its first pressure derivative of 3.4(1). The compression is found to be anisotropic, with the b-axis being significantly more compressible than the a-and c-axes.     

X-ray diffraction investigation of the hexagonal-fcc structural transition in yttrium trihydride under hydrostatic pressure

Pressure induced structural transition of yttrium hydride has been investigated using synchrotron radiation X-ray diffraction measurement up to 24 GPa at room temperature. A reversible hexagonal-fcc transition with a wide intermediate region from 11 to 20 GPa is confirmed, which is consistent with previously reported X-ray results. The diffraction patterns measured for the intermediate state are not interpreted in terms of a hexagonal-fcc coexisting state or as rare-earth structures with various metal-layer stacking sequences. The equation of state determined for the hexagonal-YH₃ provides a bulk modulus B₀ of 71.9 GPa, which is nearly half of the previously reported value, but is within the range of values reported for other rare-earth metal trihydrides with hexagonal structures.     

A high-pressure Raman and X-ray diffraction study of the perovskite SrCeO3

A high-pressure structural study of SrCeO₃ has been performed at room temperature by Raman spectroscopy and X-ray diffraction up to 32 and 45 GPa, respectively. A first-order reversible phase transition is observed at about 12 GPa in both techniques. A second weak structural change, taking place between 18 and 25 GPa, can be suspected from Raman data. The increase in the number of Raman bands and diffraction lines is an indication that the symmetry is lowered and the compound does not evolve towards the ideal cubic perovskite structure. A Rietveld analysis of X-ray data was performed for the low-pressure phase and the atomic positions and the cell lattice parameters variations are reported in this paper. The volume compressibility derived from Raman modes (5.6×10⁻¹² Pa⁻¹), involving mainly bond-stretching for each type of polyhedron, is found to be close to the one obtained from volume cell variations measured by X-ray diffraction (7.9×10⁻¹² Pa⁻¹).     

High pressure X-ray diffraction study on icosahedral boron arsenide (B12As2)

The high pressure properties of icosahedral boron arsenide (B₁₂As₂) were studied by in situ X-ray diffraction measurements at pressures up to 25.5 GPa at room temperature. B₁₂As₂ retains its rhombohedral structure; no phase transition was observed in the pressure range. The bulk modulus was determined to be 216 GPa with the pressure derivative 2.2. Anisotropy was observed in the compressibility of B₁₂As₂—c-axis was 16.2% more compressible than a-axis. The boron icosahedron plays a dominant role in the compressibility of boron-rich compounds.     

In situ high-pressure X-ray diffraction study of densification of a molecular chalcogenide glass

Structural mechanisms of densification of a molecular chalcogenide glass of composition Ge_2.5As_51.25S_46.25 have been studied in situ at pressures ranging from 1 atm to 11 GPa at ambient temperature as well as ex situ on a sample quenched from 12 GPa and ambient temperature using high-energy X-ray diffraction. The X-ray structure factors display a reduction in height of the first sharp diffraction peak and a growth of the principal diffraction peak with a concomitant shift to higher Q-values with increasing pressure. At low pressures of at least up to 5 GPa the densification of the structure primarily involves an increase in the packing of the As₄S₃ molecules. At higher pressures the As₄S₃ molecules break up and reconnect to form a high-density network with increased extended-range ordering at the highest pressure of 11 GPa indicating a structural transition. This high-density network structure relaxes only slightly on decompression indicating that the pressure-induced structural changes are quenchable.     

Experimental constraints on the phase diagram of titanium metal

The phase transformations of titanium metal have been studied at temperatures and pressures up to 973 K and 8.7 GPa using synchrotron X-ray diffraction. The equilibrium phase boundary of the α-ω transition has a dT/dP slope of 345 K/GPa, and the transition pressure at room temperature is located at 5.7 GPa. The volume change across the α-ω transition is ΔV=0.197 cm³/mol, and the associated entropy change is ΔS=0.57 J/mol K. Except for ΔV, our results differ substantially from those of previous studies based on an equilibrium transition pressure of 2.0 GPa at room temperature. The α-ω-β triple point is estimated to be at 7.5 GPa and 913 K, which is comparable with previous results obtained from differential thermal analysis and resistometric measurements. An update, more accurate phase diagram is established for Ti metal based on the present observations and previous constraints on the α-β and ω-β phase boundaries.     

High-pressure X-ray diffraction study of tungsten diselenide

Synchrotron X-ray diffraction was used in conjunction with a diamond anvil cell to investigate the properties of a tungsten diselenide (WSe₂) sample to 35.8 GPa at room temperature. By fitting the pressure-volume data to the third-order Birch-Murnaghan equation of state, the bulk modulus, K_0T, of WSe₂ was determined to be 72±1 GPa with its pressure derivative, , being 4.1±0.1. It was also found that the c-direction of the hexagonal structure is significantly more compressible than the a-direction. No phase transformation was clearly observed in the pressure range of our measurements.     

Improvement in micro-structural and mechanical properties of zinc film by surface treatment with low temperature argon plasma

Nanocrystalline zinc films were deposited on gold coated borosilicate glass substrates by thermal evaporation method using zinc powders as the source material and then treated with argon plasma at various temperatures. From X-ray diffraction study, the as-deposited films are found to be metallic Zn and polycrystalline in nature. The crystalline nature improves with the increase of temperature up to 200 °C and decreases with the further increase of temperature to 300 °C. The binding energy observed for Zn 2p_3/2, and the binding energy separation between Zn 2p_3/2 and Zn 2p_1/2 in the X-ray photoelectron spectrum indicate that the films are metallic zinc films. Transmission electron microscopic study shows hexagonal shaped grains having size ∼58 nm upon treatment with Ar plasma. It is clearly shown the grain growth and distinct grain boundary with the increase in temperature. The average Young's modulus (E) and hardness (H) are measured to be 84 GPa and 4.0 GPa for as-deposited film, whereas 98 GPa and 5.8 GPa for plasma treated film at 200 °C. The enhancement in mechanical properties is attributed to improvement in crystalline nature of the film and better interlinking between grains and boundaries.     

High pressure investigation on double perovskite Ba2MgWO6

The results of high-pressure angle dispersive X-ray diffraction measurements up to 34.3 GPa on the double perovskite Ba₂MgWO₆ are presented. The ambient rock salt phase (SG: Fm-3m) is found to be stable up to the highest pressure of the present measurements. The third order Birch-Murnaghan equation of state when fitted to pressure-volume data, yielded a zero pressure bulk modulus (B₀),and its first and second pressure derivatives as 137.0(81) GPa, and 3.9(5) and −0.03 GPa⁻¹, respectively.     

Equation of state and thermal stability of Al3BC

The lattice parameters of Al₃BC have been measured up to 5 GPa at ambient temperature using energy-dispersive X-ray powder diffraction with synchrotron radiation. A fit to the experimental p-V data using Birch-Murnaghan equation of state gives values of the Al₃BC bulk modulus 116(4) GPa and its first pressure derivative 9(2). In the 1.6-4.8 GPa range at temperatures above 1700 K Al₃BC undergoes incongruent melting that results in the formation of Al₃BC₃, AlB₂ and liquid aluminum.     

In situ X-ray observation of phase transformation in Fe2O3 at high pressures and high temperatures

A laser-heated sample in a diamond anvil cell and synchrotron X-ray radiation was used to carry out structural characterization of the phase transformation of Fe₂O₃ at high pressures (30-96 GPa) and high temperature. The Rh₂O₃(II) (or orthorhombic perovskite) structure transforms to a new phase, which exhibits X-ray diffraction data that are indicative of a CaIrO₃-type structure. The CaIrO₃-type structure exhibited an orthorhombic symmetry (space group: Cmcm) that was stable at temperatures of 1200-2800 K and pressure of 96 GPa (the highest pressure used). Unambiguous assignment of such a structure requires experimental evidence for the presence of two Fe species. Based on the equation of state of gold, the phase boundary of the CaIrO₃-type phase transformation was P (GPa)=59+0.0022×(T−1200) (K).     

Phase transition of cadmium fluoride under high pressure

We investigated the high pressure phases of CdF₂ by a joint theoretical and experimental study. The structural and electronic properties of CdF₂ were extensively explored to high pressure by ab initio calculations based on the density functional theory. A structural phase transition from the fluorite-type  (Fm-3m, Z=4) structure to the cotunnite-type (Pnma, Z=4) structure was estimated below 8 GPa, and this phase transition was examined by the high pressure experiments up to 35 GPa at room temperature. Both high pressure angle dispersive X-ray diffraction and Raman spectroscopy experiments provided convincing evidence to verify the phase transition. Our work makes clear pressure-induced phase transitions and structural information of CdF₂ under high pressure.     

Pressure tuned crystal structure in NdBa2Cu3O6+δ superconductor

The high-pressure angle-dispersive X-ray diffraction experiments on the NdBa₂Cu₃O_6+δ superconductor were performed from ambient to above 30 GPa at room temperature. The structure analysis based on the Rietveld refinement methods shows the different pressure dependence for the bond length between the basal-plane copper of the pyramids to the apical oxygen (denoted Cu(2)–O(1)) and bond length between basal-plane copper to plane oxygen (denoted Cu(2)–O(2,3)). The ambient bulk modulus B₀ is derived as 127 GPa. A possible correlation between Cu(2)–O(1) and T_c was discussed.     

Pressure-induced phase transition in defect Chalcopyrites HgAl2Se4 and CdAl2S4

Results of angle dispersive X-ray diffraction (ADXRD) measurements on the defect chalcopyrites (DCP), HgAl₂Se₄ and CdAl₂S₄ up to 22.2 and 34 GPa, respectively, are reported. The ambient tetragonal phase is retained in HgAl₂Se₄ and CdAl₂S₄ up to 13 and 9 GPa respectively. The values of the bulk modulus estimated from the Equation of State is 66(1.5) and 44.6(1) GPa for HgAl₂Se₄ and CdAl₂S₄ in the chalcopyrite phase. At higher pressure a disordered rock-salt structure and on pressure release a disordered zinc blende structure with broad X-ray diffraction lines are observed as is the case for several defect chalcopyrites.     

High pressure X-ray diffraction and electrical resistance study of the quasi-one-dimensional sulfide InV6S8

The ambient structural details and the results of room temperature high pressure angle dispersive X-ray diffraction and electrical resistance measurements on the quasi-one-dimensional sulfide, InV₆S₈, to a pressure of 25 GPa are reported. The material does not undergo a phase transition in this pressure range, though an anomaly in the c/a ratio has been observed around 10 Gpa. A fit of the Murnaghan equation of state to the V/V₀ versus pressure data, with the value of the derivative of B₀ with respect to pressure, B′₀, fixed at 4 has yielded a value of the bulk modulus, B₀, of 110 GPa. We also present data of the pressure dependence of the lattice constants, a and c, the ratio c/a, and the resistance at room temperature.     

A new high-pressure phase of ZnSe with B9-type structure

High-pressure and high-temperature behavior of ZnSe was investigated by energy dispersive X-ray diffraction method up to 14 GPa and 800°C. A new high-pressure phase with B9 (HgS)-type structure is found near the B3-B1 phase boundary at room temperature, as predicted by an ab-initio calculation. The property and observed pressure region of the B9-type phase are in good agreement with the ab-initio calculation. At high-temperature condition above 300°C, only the direct transitions are observed between the B3 and B1 phases. The B3-B1 phase boundary is also determined to be P (GPa)=12.21−0.0039T (°C) for the temperature range between 300 and 800°C.