Surfactant assisted surface studies of zinc sulfide nanoparticles

We report a simple soft chemical method for the synthesis of ZnS nanoparticles using varying concentration of cationic surfactant CTAB and examine its surface properties. Powder X-ray diffraction, UV-vis spectroscopy, photoluminescence spectroscopy, selective area electron diffraction, and transmission electron microscopy are used to characterize the as prepared ZnS nanoparticles. XRD and TEM measurements show the size of polydispersed ZnS nanoparticles is in the range of 2-5 nm with cubic phase structure. The photoluminescence spectrum of ZnS nanoparticles exhibits four fluorescence emission peaks centered at 387 nm, 412 nm, 489 nm and 528 nm showing the application potential for the optical devices. In Raman spectra of ZnS nanoparticles, the modes around 320, 615 and 700 cm⁻¹ are observed.     

Synthesis, characterization and optical properties of water-soluble ZnS:Mn nanoparticles

ZnS nanoparticles with Mn²⁺ doping (0.5-20%) have been prepared through a simple chemical method, namely the chemical precipitation method. The structure of the nanoparticles has been analyzed using X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and UV-vis spectrometer. The size of the particles is found to be 3-5 nm range. Photoluminescence spectra were recorded for undoped ZnS nanoparticles using an excitation wavelength of 320 nm, exhibiting an emission peak centered at around 445 nm. However, from the Mn²⁺-doped samples, a yellow-orange emission from the Mn²⁺⁴T₁-⁶A₁ transition is observed along with the blue emission. The prepared Mn²⁺-doped sample shows efficient emission of yellow-orange light with the peak emission 580 nm with the blue emission suppressed. The maximum PL intensity is observed only at the excitation energy of 3.88 eV (320 nm). Increase in stabilizing time up to 48 h in de-ionized water yields the enhancement of emission intensity of doped (4% Mn²⁺) ZnS. The correlation made through the concentration of Mn²⁺ versus PL intensity resulted in opposite trend (mirror image) of blue and yellow emissions.     

Synthesis of high quality and monodisperse CdS:Mn/ZnS and CdS:Mn/CdS core–shell nanoparticles

CdS:Mn²⁺/ZnS and CdS:Mn²⁺/CdS core–shell nanoparticles were synthesized in aqueous medium via chemical precipitation method in an ambient atmosphere. Polyvinylpyrrolidone (PVP) was used as a capping agent. The effect of the shell (ZnS and CdS) thickness on CdS:Mn²⁺ nanoparticles was investigated. Inorganically passivated core/shell nanocrystals having a core (CdS:Mn²⁺) diameter of 4 nm and a ZnS-shell thickness of ∼0.5 nm exhibited improved PL intensity. Optimum concentration of doping ions (Mn²⁺) was selected through optical study. For all the core–shell samples two emission peaks were observed, the first one is band edge emission in the lower wavelength side due to energy transfer to the Mn²⁺ ions in the crystal lattice; the second emission is characteristic peak of Mn²⁺ ions (⁴T₁ → ⁶A₁). The XRD, TEM and PL results showed that the synthesized core–shell particles were of high quality and monodisperse.     

Temperature dependence of photoluminescence and magnetic properties in Yb-doped ZnS nanocrystals

Zinc sul?de semiconductor nanocrystals doped with Yb³⁺ ions have been prepared through a chemical precipitation method using PVP (polyvinylpyrrolidone) as a capping agent. The structure of the nanoparticles has been analyzed by X-ray diffraction (XRD). The average size of the nanoparticles is found to be 3.7±0.4 nm. Photoluminescence spectra were recorded for doped ZnS nanoparticles as a function of temperature between 9 and 300 K. The results suggest that two emission bands have been observed at different temperatures. The width of 1.269 eV peak increases as temperature is raised. A shift of lower energy emission band has been observed with the change of temperature. Moreover, the magnetic measurement showed that the sample exhibits paramagnetic behavior.     

Structural and optical characterization of ZnS nanoparticles co-doped with Mn and Te

Nanoparticles of Zinc sulfide co-doped with equal atomic percentages of Mn and Te (5, 10 and 15 at%) were synthesized for the first time by chemical co-precipitation method. Thiophenol was used to passivate the surface of the particles. The as-prepared samples were amorphous in nature and nano-crystallinity was induced after calcining at 300 °C/2 h. The nanoparticles were characterized by EDAX, XRD, TEM, optical absorption and PL studies. EDAX spectra revealed only minor deviations of the dopant concentrations from the target compositions. The nanoparticles showed cubic structure. The particle size estimated from XRD/TEM was in the range 3–5 nm. Optical absorption studies showed a blue-shift of the fundamental absorption edge with respect to that of bulk ZnS. PL spectra showed emission in the red region with composition dependent emission wavelength. ZnS nanoparticles doped with Mn (5 and 10 at%) were also synthesized and characterized for comparison.     

Study of optical and thermal properties in nickel doped ZnS nanoparticles using surfactants

The presence of surfactants polyethylene glycol (PEG), polyvinyl pyrrolidone (PVP), sodium hexameta polyphosphate (SHMP) and tri-octyl phosphine oxide (TOPO) on the surface of Ni²⁺ doped ZnS (ZnS:Ni²⁺) nanoparticles resulted variation in their optical properties. The optical properties of each surfactant-capped ZnS:Ni²⁺ nanoparticles were investigated using UV–visible (UV–Vis) absorption and photoluminescence (PL) techniques. The absorption spectra and fluorescent emission spectra showed a significant blue shift compared to that of the bulk zinc sulfide. The effect of the optical properties in colloidal form (wet) and dry samples were investigated. Enhanced PL emission was observed for the dry samples at 80 °C. Thermal properties of the ZnS:Ni²⁺ was also studied using thermo gravimetric-differential thermal analysis (TG-DTA), Fourier transform infra-red spectrometer (FT-IR) and X-ray diffraction (XRD). The results are presented and discussed.     

Optical properties of annealed Mn-doped ZnS nanoparticles

Cysteine stabilized ZnS and Mn²⁺-doped ZnS nanoparticles were synthesized by a wet chemical route. Using the ZnS:Mn²⁺ nanoparticles as seeds, silica-coated ZnS (ZnS@Si) and ZnS:Mn²⁺ (ZnS:Mn²⁺@Si) nanocomposites were formed in water by hydrolysis and condensation of tetramethoxyorthosilicate (TMOS). The influence of annealing in air, formier gas, and argon at 200-1000 °C on the chemical stability of ZnS@Si and ZnS:Mn²⁺@Si nanoparticles with and without silica shell was examined. Silica-coated nanoparticles showed an improved thermal stability over uncoated particles, which underwent a thermal combustion at 400 °C. The emission of the ZnS@Si and ZnS:Mn²⁺@Si passed through a minimum in photoluminescence intensity when annealed at 600 °C. Upon annealing at higher temperatures, ZnS@Si conserved the typical emission centered at 450 nm (blue). ZnS:Mn²⁺@Si yielded different high intensity emissions when heated to 800 °C depending on the gas employed. Emissions due to the Mn²⁺ at 530 nm (green; Zn₂SiO₄:Mn²⁺), 580 nm (orange; ZnS:Mn²⁺@Si), and 630 nm (red; ZnS:Mn²⁺@Si) were obtained. Therefore, with a single starting product a set of different colors was produced by adjusting the atmosphere wherein the powder is heated.     

Self-assembled highly symmetrical ZnS nanostructures and their cathodoluminescence

Here we report the synthesis and characterization of self-assembled highly symmetrical, i.e., two-fold, three-fold, four-fold and multi-fold, ZnS nanostructures through a simple thermal evaporation process. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses indicated that the ZnS nanostructures are composed of faceted crystalline ZnS nanorods with a diameter in the range of 200-600 nm and length up to 2 μm. In addition, all the branched ZnS nanorods have preferential orientation along the [0 0 2] direction of a wurtzite-type hexagonal structure. The cathodoluminescence measurement demonstrated that the ZnS nanostructures have a strong and uniform band-gap emission centered at 337 nm, indicating their good crystallinity and excellent optical property.     

Synthesis and characterization of Cu doped ZnS nanoparticles using TOPO and SHMP as capping agents

Undoped and Cu²⁺ doped (0.2-0.8%) ZnS nanoparticles have been synthesized through chemical precipitation method. Tri-n-octylphosphine oxide (TOPO) and sodium hexametaphosphate (SHMP) were used as capping agents. The synthesized nanoparticles have been analyzed using X-ray diffraction (XRD), transmission electron microscope (TEM), Fourier transform infrared spectrometer (FT-IR), UV-vis spectrometer, photoluminescence (PL) and thermo gravimetric-differential scanning calorimetry (TG-DTA) analysis. The size of the particles is found to be 4-6 nm range. Photoluminescence spectra were recorded for ZnS:Cu²⁺ under the excitation wavelength of 320 nm. The prepared Cu²⁺-doped sample shows efficient PL emission in 470-525 nm region. The capped ZnS:Cu emission intensity is enhanced than the uncapped particles. The doping ions were identified by electron spin resonance (ESR) spectrometer. The phase changes were observed in different temperatures.     

Field emission from ZnS nanorods synthesized by radio frequency magnetron sputtering technique

The field emission property of zinc sulphides nanorods synthesized in the thin film form on Si substrates has been studied. It is seen that ZnS nanorod thin films showed good field emission properties with a low-macroscopic turn-on field (2.9-6.3 V/μm). ZnS nanorods were synthesized by using radio frequency magnetron sputtering of a polycrystalline prefabricated ZnS target at a relatively higher pressure (10⁻¹ mbar) and at a lower substrate temperature (233-273 K) without using any catalyst. Transmission electron microscopic image showed the formation of ZnS nanorods with high aspect ratio (>60). The field emission data were analysed using Fowler-Nordhiem theory and the nearly straight-line nature of the F-N plots confirmed cold field emission of electrons. It was also found that the turn-on field decreased with the decrease of nanorod's diameters. The optical properties of the ZnS nanorods were also studied. From the measurements of transmittance of the films deposited on glass substrates, the direct allowed bandgap values have been calculated and they were in the range 3.83-4.03 eV. The thickness of the films was ∼600 nm.     

Synthesis and photoluminescent and nonlinear optical properties of manganese doped ZnS nanoparticles

In this work we synthesized ZnS:Mn²⁺ nanoparticles by chemical method using PVP (polyvinylpyrrolidone) as a capping agent in aqueous solution. The structure and optical properties of the resultant product were characterized using UV-vis optical spectroscopy, X-ray diffraction (XRD), photoluminescence (PL) and z-scan techniques. UV-vis spectra for all samples showed an excitonic peak at around 292 nm, indicating that concentration of Mn²⁺ ions does not alter the band gap of nanoparticles. XRD patterns showed that the ZnS:Mn²⁺ nanoparticles have zinc blende structure with the average crystalline sizes of about 2 nm. The room temperature photoluminescence (PL) spectrum of ZnS:Mn²⁺ exhibited an orange-red emission at 594 nm due to the ⁴T₁-⁶A₁ transition in Mn²⁺. The PL intensity increased with increase in the Mn²⁺ ion concentration. The second-order nonlinear optical properties of nanoparticles were studied using a continuous-wave (CW) He-Ne laser by z-scan technique. The nonlinear refractive indices of nanoparticles were in the order of 10⁻⁸ cm²/W with negative sign and the nonlinear absorption indices of these nanoparticles were obtained to be about 10⁻³ cm/W with positive sign.     

Formation of zinc sulfide nanoparticles in HMTA matrix

A hydrothermal method has been optimized for the synthesis of ZnS nanoparticles. The nanoparticles were stabilized using Hexamethylenetetramine (HMTA) as surfactant in aqueous solution. The self-assembling of the surfactant molecules in the water solution forms a unique architecture that can be adopted as the reaction template for the formation of nanomaterials. The average grain size of the nanoparticles calculated from the XRD pattern was of the order of 2 nm which exhibits cubic zinc-blende structure. TEM results showed that the synthesized nanoparticles were uniformly dispersed in the HMTA matrix without aggregation. The spectroscopic results revealed that the synthesized ZnS nanoparticles exhibits strong quantum confinement effect as the optical band gap energy increased significantly compared to the bulk ZnS material. Formation of HMTA capped ZnS nanoparticles were confirmed by FTIR studies. The PL spectra exhibit a strong green emission peak around 502 nm attributed to some self-activated defect centers related to Zn-vacancies.     

Hydrothermal synthesis and characterization of ZnS hierarchical microspheres

In the present work, wurtzite ZnS hierarchical microsphere nanostructures composed of nanowires were synthesized through hydrothermal method. The morphologies and microstructures of the as obtained wurtzite ZnS sample were investigated by scanning electron microscopy and transmission electron microscopy. The results show that the diameter of the nanowires is about 10 nm, the length is about 500 nm, growing along the [0 0 1] direction. UV–visible spectroscopy shows that the band gap of the as obtained ZnS hierarchical microspheres is 3.4 eV. Room temperature photoluminescence measurements reveals a strong green emission peak at around 516 nm. The N₂ adsorption–desorption isotherms experiment at 77 K exhibits that the surface area of the ZnS sample is 99.87 m² g⁻¹.     

Preparation, characterization and study of optical properties of ZnS nanophosphor

In this work the preparation, characterization and photoluminescence studies of pure and copper-doped ZnS nanophosphors are reported, which are prepared by using solid-state reaction technique at a temperature of 100 °C. The as-obtained samples were characterized by X-ray diffraction (XRD) and UV-VIS Reflectance spectroscopy. The XRD analysis confirms the formation of cubic phase of undoped as well as Cu²⁺-doped ZnS nanoparticles. Furthermore it shows that the average size of pure as well as copper-doped samples ranges from 15 to 50 nm. The room-temperature PL spectra of the undoped ZnS sample showed two main peaks centered at around 421 and 450 nm, which are the characteristic emissions of interstitial zinc and sulfur vacancies, respectively. The PL of the doped sample showed a broad-band emission spectrum centered at 465 nm accompanied with shoulders at around 425, 450 and 510 nm, which are the characteristic emission peaks of interstitial zinc, sulfur vacancies and Cu²⁺ ions, respectively. Our experimental results indicate that the PL spectrum confirms the presence of Cu²⁺ ions in the ZnS nanoparticles as expected.     

Analysis of the effect of annealing on the photoluminescence spectra of Cu ion implanted ZnS nanoparticles

In the present study, we report the photoluminescence (PL) study of nanoparticles of ZnS implanted with Cu⁺ ions at the doses of 5×10¹⁴, 1×10¹⁵ and 5×10¹⁵ ions/cm² and annealed at 200 and 300 °C. The photoluminescence spectra of the samples implanted at lower doses of 5×10¹⁴ and 1×10¹⁵ ions/cm² and annealed at 200 and 300 °C showed peaks at around 406, 418 and 485 nm. The PL emission peak at 485 nm was attributed to the transition of electrons from conduction band of ZnS to the impurity level formed by the implanted Cu⁺ ions. In the PL spectrum of the sample implanted at the highest dose of 5×10¹⁵ ions/cm², in addition to the emission peaks observed in the PL spectra of the samples implanted at lower doses, a peak at around 525 nm, the intensity of which decreased with increase in the annealing temperature, was observed. The emission peak at 525 nm was attributed to the transitions between sulfur and zinc vacancy levels. The full width at half maximum (FWHM) of the emission peak at 406 nm was observed to decrease with increase in annealing temperature, indicating lattice reconstruction. The observation of copper ion impurity related peak at 485 nm in the PL spectra of samples of the present study indicated that the doping of copper ions into the ZnS lattice is achievable by implanting Cu⁺ ions followed by annealing.     

Preparation,characterization and electroluminescence studies of copper doped zinc sulfide nanocrystals

Copper doped zinc sulfide nanoparticles were prepared by chemical precipitation method. The size of the particles was varied by changing the concentration of capping agent. The XRD studies indicate that most of the samples are cubic in nature. The broadening of peaks tends to increase with increasing capping agent concentration showing decrease in particle size. The crystalline size computed using Scherrer formula is found to be in range of 3–10 nm. Absorption spectra show absorption edge in UV region. The edge was found to shift towards shorter wavelength as the capping agent concentration is increased. This indicates increased effective band gap and hence reduced particle size. The nanoparticle size has been estimated in the range 5–10 nm using effective mass approximation model. For electroluminescence (EL) study of ZnS:Cu nanocrystals, the EL cells were prepared by placing ZnS:Cu nanoparticles between SnO₂ coated conducting glass plate and aluminum foil. Alternating voltage of various frequencies was applied and EL brightness (B) at different voltages (V) was measured and reported in this paper.     

Photoluminescence of Cu-doped and Cu-doped ZnS nanocrystallites

ZnS:Cu⁺ and ZnS:Cu²⁺ nanocrystallites have been obtained by chemical precipitation from homogeneous solutions of zinc, copper salt compounds, with S²⁻ as precipitating anion formed by decomposition of thioacetamide. X-ray diffraction (XRD) analysis shows that average diameter of particles is about 2.0-2.5 nm. The nanoparticles can be doped with copper during synthesis without altering XRD pattern. However, the emission spectrum of ZnS nanocrystallites doped with Cu⁺ and Cu²⁺ consists of two emission peaks. One is at 450 nm and the other is at 530 nm. The absorptive spectrum of the doped sample is different from that of un-doped ZnS nanoparticles. Because the emission process of the Cu⁺ luminescence center in ZnS nanocrystallites is remarkably different from that of the Cu²⁺ luminescence center, the emission spectra of Cu⁺-doped samples are different from those of Cu²⁺-doped samples.     

Synthesis and investigation of nonlinear optical properties of semiconductor ZnS nanoparticles

ZnS nanoparticles were prepared by a simple chemical method and using PVP (poly vinylpyrrolidone) as capping agent. The sample was characterized by UV-vis spectrophotometer, X-ray diffraction (XRD) and Z-scan technique. XRD pattern showed that the ZnS nanoparticles had zinc blende structure with an average size of about 2.18 nm. The value of band gap of these nanoparticles was measured to be 4.20 eV. The nonlinear optical properties of ZnS nanoparticles in aqueous solution were studied by Z-scan technique using CW He-Ne laser at 632.8 nm. The nonlinear absorption coefficient (β) was estimated to be as high as 3.2×10⁻³ cm/W and the nonlinear refractive index (n₂) was in order of 10⁻⁸ cm²/W. The sign of the nonlinear refractive index obtained negative that indicated this material exhibits self-defocusing optical nonlinearity.     

Fluorescence properties of Ag nanoparticles in water, methanol and hexane

Ag nanoparticles, synthesized employing the electro-exploding wire technique, are reported. Absorption in the UV-visible region by these particles is characterized by the features reported in the literature, namely, a possible plasmon peak at ∼404 nm. For Ag nanoparticles dispersed in water, photo-excitation in the ranges 210-235 and 255-280 nm produces similar fluorescence emission at ∼300 nm, whose corresponding resonant absorption takes place at 215 and 270 nm in the excitation spectra. Further, we study the effect of the surrounding medium (solvent effect) on fluorescence from these nanoparticles by comparing fluorescence emission in methanol and hexane for photo-excitation in the same range. Compared to water, fluorescence emission in methanol is observed red-shifted at ∼310 nm, which further red-shifts to ∼325 nm in hexane. The corresponding resonant absorptions in methanol are at 225 and 275 nm. Consequence of this red-shift in a less polar solvent is discussed.     

The optical properties and energy transition process in nanocomposite of polyvinyl-pyrrolidone polymer and Mn-doped ZnS

This study has been carried out on the optical properties of polyvinyl-pyrrolidone (PVP), the energy transition process in nanocomposite of PVP capped ZnS:Mn nanocrystalline and the influence of the PVP concentration on the optical properties of the PVP capped ZnS:Mn nanocrystalline thin films synthesized by the wet chemical method. The microstructures of the samples were investigated by X-ray diffraction, the atomic absorption spectroscopy, and transmission electron microscopy. The results showed that the prepared samples belonged to the sphalerite structure with the average particle size of about 2–3 nm. The optical properties of samples are studied by measuring absorption, photoluminescence (PL) spectra and time-resolved PL spectra in the wavelength range from 200 to 700 nm at 300 K. From data of the absorption spectra, the absorption edge of PVP polymer was found about of 230 nm. The absorption edge of PVP capped ZnS:Mn nanoparticles shifted from 322 to 305 nm when the PVP concentration increases. The luminescence spectra of PVP showed a blue emission with peak maximum at 394 nm. The luminescence spectra of ZnS:Mn–PVP exhibits a blue emission with peak maximum at 437 nm and an orange–yellow emission of ion Mn²⁺ with peak maximum at 600 nm. While the PVP coating did not affect the microstructure of ZnS:Mn nanomaterial, the PL spectra of the PVP capped ZnS:Mn samples were found to be affected strongly by the PVP concentration.